Evaluation of passive ventilation provision in domestic housing retrofit

Increasing energy efficiency in the residential sector, while maintaining adequate home ventilation for health and well-being, is proving to be a challenge. This study assesses the efficacy of passive ventilation strategies designed to comply with building regulations and imposed after housing energy-efficiency retrofits. In particular, it focuses on the provision of ventilation using background through-wall vents, which remains a common strategy in a number of European countries including Ireland and the UK, where vent sizes, related to floor area, are stipulated in building regulations. A collective of social housing, with background through-wall vents installed post thermal retrofit, is taken as a case study. These homes are modelled to interrogate the impact of the passive ventilation strategy on house air exchange rate and thermal heating energy loads. The reaction of occupants to through-wall vent installation is decidedly negative and many block vents to limit thermal discomfort and heat loss. Simulation studies show significant external air ingress through vents. A wide range of effective air change rates are observed when vents are sized without reference to building airtightness, and significant energy penalties result for the leakier homes. This study evaluates the provision of passive through-wall ventilation as part of a retrofit programme and shows it to have a number of drawbacks that may impact on the health of the building and its occupants and ultimately be at odds with the aims of achieving energy efficiency in the residential sector.

L’innovation de modèle d’affaires exploitant les technologies de l’information et de la communication -contribution à la compréhension du lien entre TIC et performance

Les entreprises qui se servent des technologies de l’information et de la communication (TIC) pour innover mesurent des impacts très inégaux sur leurs performances. Cela dépend principalement de l’intensité, l’ampleur et la cohérence de l’innovation systémique auxquelles elles procèdent. En l’état de la connaissance, la littérature identifie le besoin de mieux comprendre cette notion d’alignement systémique. Cette thèse propose d’aborder cette question à l’aide de la notion d’innovation du modèle d’affaires. Une revue systématique de la littérature a été réalisée. D’un point de vue conceptuel, elle contribue à mieux définir le concept de modèle d’affaires, et a permis de réaliser une typologie des différents cadres de modélisation d’affaires. Le cadre conceptuel qui en est issu aborde le sujet de l’innovation du modèle d’affaires à trois niveaux : (1) stratégique à travers la proposition d’une matrice de positionnement de l’innovation de modèle d’affaires et l’identification de trajectoires d’innovation ; (2) configuration du modèle d’affaires à l’aide du cadre de modélisation tétraédrique de Caisse et Montreuil ; et (3) opérationnel-tactique par l’analyse des facteurs clés de succès et des chaines structurantes. Du fait du caractère émergeant de la littérature sur le sujet, la méthodologie choisie est une étude de cas comparés. Trois études de cas d’entreprises québécoises ont été réalisées. Elles oeuvrent dans des secteurs variés, et ont procédé à une innovation significative de leur modèle d’affaires en s’appuyant sur des TIC,. La recherche conclut à la pertinence de l’utilisation du concept de modèle d’affaires en ce qui concerne l’analyse de l’alignement systémique dans un contexte d’innovation appuyée sur les TIC. Neuf propositions de recherche sont énoncées et ouvrent la voie à de futures recherches

Building Owner vs. Energy User: a Split Incentive for Energy Reduction

The UK’s historically low cost of energy has encouraged a culture that considers energy to be in limitless supply and excessive levels of consumption acceptable. Now that supplies are becoming restricted and costs rising, it is becoming recognised this energy culture has created a legacy stock of buildings with poor building fabric, limited energy efficiency equipment and even lower levels of energy awareness. Cost effective technologies are readily available but not adopted by UK SMEs in non-domestic buildings, as rational economic theory would expect. Policy-makers attribute this to inaccessibility of information and investment and design policies accordingly. However, as escalation of demand continues an alternative driver of this paradox must exist. This research hypothesises that this is the ownership structures of non-domestic buildings. Tenure of business premises is found to prevent adoption of energy conservation opportunities; 64% of SME surveyed encountered barriers to energy efficiency related to building ownership. When increased pro rata to reflect the UK SME population, almost 2.5 million businesses appear unable to benefit from energy improvements.

The role of new information and communication technologies (ICTs) in information and communication in science. A conceptual framework and empirical study

Problem This dissertation presents a literature-based framework for communication in science (with the elements partners, purposes, message, and channel), which it then applies in and amends through an empirical study of how geoscientists use two social computing technologies (SCTs), blogging and Twitter (both general use and tweeting from conferences). How are these technologies used and what value do scientists derive from them? Method The empirical part used a two-pronged qualitative study, using (1) purposive samples of ~400 blog posts and ~1000 tweets and (2) a purposive sample of 8 geoscientist interviews. Blog posts, tweets, and interviews were coded using the framework, adding new codes as needed. The results were aggregated into 8 geoscientist case studies, and general patterns were derived through cross-case analysis. Results A detailed picture of how geoscientists use blogs and twitter emerged, including a number of new functions not served by traditional channels. Some highlights: Geoscientists use SCTs for communication among themselves as well as with the public. Blogs serve persuasion and personal knowledge management; Twitter often amplifies the signal of traditional communications such as journal articles. Blogs include tutorials for peers, reviews of basic science concepts, and book reviews. Twitter includes links to readings, requests for assistance, and discussions of politics and religion. Twitter at conferences provides live coverage of sessions. Conclusions Both blogs and Twitter are routine parts of scientists' communication toolbox, blogs for in-depth, well-prepared essays, Twitter for faster and broader interactions. Both have important roles in supporting community building, mentoring, and learning and teaching. The Framework of Communication in Science was a useful tool in studying these two SCTs in this domain. The results should encourage science administrators to facilitate SCT use of scientists in their organization and information providers to search SCT documents as an important source of information.

Front end development for building automation systems using JavaScript Frameworks

Automation technologies are widely acclaimed to have the potential to significantly reduce energy consumption and energy-related costs in buildings. However, despite the abundance of commercially available technologies, automation in domestic environments keep on meeting commercial failures. The main reason for this is the development process that is used to build the automation applications, which tend to focus more on technical aspects rather than on the needs and limitations of the users. An instance of this problem is the complex and poorly designed home automation front-ends that deter customers from investing in a home automation product. On the other hand, developing a usable and interactive interface is a complicated task for developers due to the multidisciplinary challenges that need to be identified and solved. In this context, the current research work investigates the different design problems associated with developing a home automation interface as well as the existing design solutions that are applied to these problems. The Qualitative Data Analysis approach was used for collecting data from research papers and the open coding process was used to cluster the findings. From the analysis of the data collected, requirements for designing the interface were derived. A home energy management functionality for a Web-based home automation front-end was developed as a proof-of-concept and a user evaluation was used to assess the usability of the interface. The results of the evaluation showed that this holistic approach to designing interfaces improved its usability which increases the chances of its commercial success.

Subjective comparison of consumer television technologies for 3D visualization

This paper presents a comparison among different consumer 3D display technologies by means of a subjective assessment test. Therefore, four 55-in displays have been considered: one autostereoscopic display, one stereoscopic with polarized passive glasses, and two with active shutter glasses. In addition, a high-quality 3D video database has been used to show diverse material with both views in high definition. To carry out the test, standard recommendations have been followed considering also some modifications looking for a test environment more similar to real home viewing conditions, with the objective of obtaining more representative conclusions. Moreover, several perceptual factors have been considered to study the performance of the displays, such as picture quality, depth perception, and visual discomfort. The obtained results show interesting issues, like the performance improvement of active shutter glasses technology, the high performance of the polarized glasses technology in terms of quality and comfort, and the need of improvement of the autostereoscopic displays to complement the visual comfort to reach a global high-quality visual experience.

BUILDING A DISCOURSE: BRIDGING THE GAP BETWEEN NEW MEDIA'S CONVERGENCE AND RHETORIC AND COMPOSITION'S MULTIMODALITY

My dissertation emphasizes the use of narrative structuralism and narrative theories about storytelling in order to build a discourse between the fields of New Media and Rhetoric and Composition. Propp's morphological analysis and the breaking down of stories into component pieces aides in the discussion of storytelling as it appears in and is mediated by digital and computer technologies. New Media and Rhetoric and Composition are aided by shared concerns for textual production and consumption. In using the notion of "kairotic reading" (KR), I show the interconnectedness and interdisciplinarity required in the development of pedagogy utilized to teach students to develop into reflective practitioners that are aware of their rhetorical surroundings and can made sound judgments concerning their own message generation and consumption in the workplace. KR is a transferable skill that is beneficial to students and teachers alike. The dissertation research utilizes theories of New Media and New Media-influenced practitioners, including Jenkins' theory of convergence, Bourdieu's notion of taste, Gee's term "semiotic domains," and Manovich's "modification." These theoretical pieces are combined in order to show how KR can be extended by convergent narrative practices. In order to build connections with New Media, the consideration and inclusion of Kress and van Leeuwen's multimodality, Selber's "reflective practitioners," and Selfe's definition of multimodal composing allow for a greater establishment of conversation order to create a richer conversation around the implications of metacognitive development and practitioner reflexivity with scholars in New Media. My research also includes analysis of two popular media franchises Deborah Harkness' A Discovery of Witches and Fox's Bones television series to show similarities and differences among convergence-linked and multimodal narratives. Lastly, I also provide example assignments that can be taken, further developed, and utilized in classrooms engaging in multimodal composing practices. This dissertation pushes consideration of New Media into the work already being performed by those in Rhetoric and Composition.

DESIGN AND APPLICATION OF WIRELESS PASSIVE MAGNETOELASTIC RESONANCE AND MAGNETOHARMONIC FORCE SENSORS

The objective of the work described in this dissertation is the development of new wireless passive force monitoring platforms for applications in the medical field, specifically monitoring lower limb prosthetics. The developed sensors consist of stress sensitive, magnetically soft amorphous metallic glass materials. The first technology is based on magnetoelastic resonance. Specifically, when exposed to an AC excitation field along with a constant DC bias field, the magnetoelastic material mechanically vibrates, and may reaches resonance if the field frequency matches the mechanical resonant frequency of the material. The presented work illustrates that an applied loading pins portions of the strip, effectively decreasing the strip length, which results in an increase in the frequency of the resonance. The developed technology is deployed in a prototype lower limb prosthetic sleeve for monitoring forces experienced by the distal end of the residuum. This work also reports on the development of a magnetoharmonic force sensor comprised of the same material. According to the Villari effect, an applied loading to the material results in a change in the permeability of the magnetic sensor which is visualized as an increase in the higher-order harmonic fields of the material. Specifically, by applying a constant low frequency AC field and sweeping the applied DC biasing field, the higher-order harmonic components of the magnetic response can be visualized. This sensor technology was also instrumented onto a lower limb prosthetic for proof of deployment; however, the magnetoharmonic sensor illustrated complications with sensor positioning and a necessity to tailor the interface mechanics between the sensing material and the surface being monitored. The novelty of these two technologies is in their wireless passive nature which allows for long term monitoring over the life time of a given device. Additionally, the developed technologies are low cost. Recommendations for future works include improving the system for real-time monitoring, useful for data collection outside of a clinical setting.

Natural Disasters and Comparative State-Formation and Nation-Building: Earthquakes in Argentina and Chile (1822-1939)

Natural disasters in Argentina and Chile played a significant role in the state-formation and nation-building process (1822-1939). This dissertation explores state and society responses to earthquakes by studying public and private relief efforts reconstruction plans, crime and disorder, religious interpretations of catastrophes, national and transnational cultures of disaster, science and technology, and popular politics. Although Argentina and Chile share a political border and geological boundary, the two countries provide contrasting examples of state formation. Most disaster relief and reconstruction efforts emanated from the centralized Chilean state in Santiago. In Argentina, provincial officials made the majority of decisions in a catastrophe’s aftermath. Patriotic citizens raised money and collected clothing for survivors that helped to weave divergent regions together into a nation. The shared experience of earthquakes in all regions of Chile created a national disaster culture. Similarly, common disaster experiences, reciprocal relief efforts, and aid commissions linked Chileans with Western Argentine societies and generated a transnational disaster culture. Political leaders viewed reconstruction as opportunities to implement their visions for the nation on the urban landscape. These rebuilding projects threatened existing social hierarchies and often failed to come to fruition. Rebuilding brought new technologies from Europe to the Southern Cone. New building materials and systems, however, had to be adapted to the South American economic and natural environment. In a catastrophe’s aftermath, newspapers projected images of disorder and the authorities feared lawlessness and social unrest. Judicial and criminal records, however, show that crime often decreased after a disaster. Finally, nineteenth-century earthquakes heightened antagonism and conflict between the Catholic Church and the state. Conservative clergy asserted that disasters were divine punishments for the state’s anti-clerical measures and later railed against scientific explanations of earthquakes.

Sustainability Evaluation of Green Building Certification Systems

The attention on green building is driven by the desire to reduce a building’s running cost over its entire life cycle. However, with the use of sustainable technologies and more environmentally friendly products in the building sector, the construction industry contributes significantly to sustainable actions of our society. Different certification systems have entered the market with the aim to measure a building’s sustainability. However, each system uses its own set of criteria for the purpose of rating. The primary goal of this study is to identify a comprehensive set of criteria for the measurement of building sustainability, and therefore to facilitate the comparison of existing rating methods. The collection and analysis of the criteria, identified through a comprehensive literature review, has led to the establishment of two additional categories besides the 3 pillars of sustainability. The comparative analyses presented in this thesis reveal strengths and weaknesses of the chosen green building certification systems - LEED, BREEAM, and DGNB.

Peripherally η1-Platinated Organometallic Porphyrins as Building Blocks for Multiporphyrin Arrays

The modification of peripherally metalated meso-η1-platiniometalloporphyrins, such as trans-[PtBr(NiDAPP)(PPh3)2] (H2DAPP = 5-phenyl-10,20-bis(3‘,5‘-di-tert-butylphenyl)porphyrin), leads to the analogous platinum(II) nitrato and triflato electrophiles in almost quantitative yields. Self-assembly reactions of these meso-platinioporphyrin tectons with pyridine, 4,4‘-bipyridine, or various meso-4-pyridylporphyrins in chloroform generate new multicomponent organometallic porphyrin arrays containing up to five porphyrin units. These new types of supramolecular arrays are formed exclusively in high yields and are stable in solution or in the solid state for extended periods. They were characterized by multinuclear NMR and UV−visible spectroscopy as well as high-resolution electrospray ionization mass spectrometry.