Electrochemical behavior of thermally sprayed stainless steel coatings in 3.4% NaCl solution

Four types of stainless steel coatings prepared by a high velocity oxy-fuel spraying system (HVOF) were studied. Differences among coated steels were related to the spraying parameters, which influenced the behavior of the samples against the corrosion. The electrochemical behavior of the stainless steel coatings was strongly influenced by porosity, the presence of micro- and macro-cracks, and also of un-melted particles. Once the electrolyte reached the steel substrate via these defects, the galvanic pair formed between the coating and substrate-accelerated corrosion, leading to the depletion of the coating. (C) 2004 Elsevier Ltd. All rights reserved.

Ferroelectric characteristics of SrBi4Ti4O15 thin films grown on Pt/Ti/SiO2/Si substrates by the soft chemical method

Ferroelectric SrBi4Ti4O15 thin films were successfully prepared on a Pt(111)/Ti/SiO2/Si(100) substrate for the first time by spin coating, using the polymeric precursor method. X-ray diffraction patterns of the films indicate that they are polycrystalline in nature. Atomic force microscopy (AFM) analyses showed that the surface of these films is smooth, dense and crack-free with low surface roughness (6.4 nm). At room temperature and at a frequency of 1 MHz, the dielectric constant and the dissipation factor were, respectively, 150 and 0.022. The C-V characteristics of perovskite thin film prepared at low temperature show normal ferrolectric behaviour. The remanent polarization and coercive field for the films deposited were 5.4 mu C/cm(2) and 8 5 kV/cm, respectively. All the capacitors showed good polarization fatigue characteristics at least up to 1 x 10(10) bipolar pulse cycles indicating that SrBi4Ti4O15 thin films can be a promising material for use in nonvolatile memories. (c) 2005 Elsevier B.V. All rights reserved.

WC-CoCr coatings sprayed by high velocity oxygen-fuel (HVOF) flame on AA7050 aluminum alloy: electrochemical behavior in 3.5% NaCl solution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Repeatability of corrosion parameters for titanium-molybdenum alloys in 0.9% NaCl solution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical study of TEOS, TEOS/MPTS, MPTS/MMA and TEOS/MPTS/MMA films on tin coated steel in 3.5% NaCl solution

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Highly corrosion resistant siloxane-polymethyl methacrylate hybrid coatings

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

CULTIVATION of THE EDIBLE MUSHROOM OUDEMANSIELLA CANARII (JUNGH.) HÖHN. IN LIGNOCELLULOSIC SUBSTRATES

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espermidina exógena atenua os efeitos do NaCl na germinação e crescimento inicial de leguminosas forrageiras

Objetivou-se nesse estudo avaliar o papel atenuador da espermidina exógena sobre a germinação, vigor de sementes e crescimento de plântulas de cultivares das forrageiras alfafa, guandu e labe-labe submetidas ao estresse salino. A semeadura foi realizada em caixas de plástico tipo gerbox forradas com papel de filtro umedecidos com soluções salinas nas concentrações de 0, 20, 40, 60, 80 e 120 mM de NaCl contendo 0 ou 0,5 mM de espermidina. O delineamento experimental foi inteiramente casualizado em esquema fatorial 3 x 6 x 2 (forrageiras x salinidade x espermidina) com cinco repetições de 25 sementes. As avaliações da germinação foram realizadas no quarto e décimo dias, juntamente com o índice de velocidade de germinação (IVG), avaliado até o nono dia após a semeadura. Determinou-se a concentração salina que reduz em 50% a germinação e a massa seca da parte aérea e raiz no décimo dia após a semeadura. A aplicação de espermidina exógena proporcionou maior acúmulo de massa seca das raízes de labe-labe cv. Rongai, além de ter possibilitado a germinação de 50% das sementes de guandu cv. Caqui até a concentração salina de 72,09 mM de NaCl, assim como maior IVG nas sementes das leguminosas alfafa cv. Crioula e labe-labe cv. Rongai.

Reuse of sand, crushed sugarcane and peanut hull-based substrates for cherry tomato cultivation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of different substrates on composting of poultry litter

The objective was to evaluate the differences between distinct types of litter material and their combinations in the dynamics of degradation on the organic matter fractions and the quality of the final compound. The treatments were established according to material used as substrate for broiler litter: treatment 1 - rice husks; 2 - sugar cane bagasse; 3 - wood shavings; 4 - wood shavings + sugar cane bagasse; 5 - rice husks + sugar cane bagasse; and 6 - Napier grass. The following variables were monitored: temperature, levels of total solids (TS), volatile solids (VS), mass and volume of the pile, fibrous fraction, and levels and reductions of N, P and K during the process. Piles formed with Napier grass and sugar cane bagasse presented the highest average temperatures during composting. The greater average reductions in TS and VS were attained in piles with sugar cane bagasse (68.12 and 73.07%, for TS and VS, respectively). The reductions of greatest volume occurred in piles with sugar cane bagasse (52.08%), followed by Napier grass (50.56%). Poultry litters composed of rice husks and wood shavings presented 13.21 and 10.23% of lignin, respectively, which contributed to the lower degradation of fibrous fraction and degradability. Substrates with lower lignin content were those with greatest organic matter degradation rate and had reduced losses of N levels during the process. Composting performance is affected by the initial substrate used to compose the poultry litter.

Effects of central alpha-adrenergic agonists on hormone-induced 3% NaCl and water intake

Male rats received intracerebroventricular (ICV) renin (600 ng) or daily subcutaneous injections of deoxycorticosterone (5 mg) to induce 3% NaCl and water intake. Noradrenaline (NOR; 40-160 nmol) and clonidine (CLO; 5-20 nmol) injected ICV. induced 70 to 100% inhibition of the intakes. Phenylephrine (PHE; 40-160 nmol) injected ICV induced 60 to 95% inhibition of the intakes. NOR and PHE induced a stronger inhibition on the 3% NaCl intake induced by renin than on the intake induced by deoxycorticosterone (DOC), and CLO did the opposite. CLO was always more effective than PHE to induce inhibition of the intakes. The results suggest that NOR inhibits hormone (angiotensin II, aldosterone)-induced NaCl intake by acting mainly on alpha(2)-adrenergic receptors.

Receptor-mediated effects of clonidine on need-induced 3% NaCl and water intake

Clonidine combined with adrenergic antagonists were injected in the medial septal area in order to characterize the type of receptors involved with its inhibitory effect on 3% NaCl and water intake of sodium-depleted (furosemide + 24 h of removal of ambient sodium) and 30-h water-deprived rats, respectively. The inhibitory effect of clonidine (20 nmol) on need-induced water intake was reduced 50% by an 80-nmol dose of either idazoxan, yohimbine or prazosin. The inhibitory effect of clonidine (30 nmol) on need-induced 3% NaCl intake was completely antagonized by idazoxan (80, 160 nmol), not altered by yohimbine (40-160 nmol), and partially potentiated (40 nmol) or inhibited (160 nmol) by prazosin. Propranolol did not alter the effects of clonidine on either water (80 nmol) or 3% NaCl (40-160 nmol) intake. The results suggest that the inhibitory effects of clonidine on 3% NaCl and water intake are mediated by different types of alpha2-adrenergic receptors. Copyright (C) 1997 Elsevier B.V.

Oriented growth of Bi3.25La0.75Ti3O12 thin films on RuO2/SiO2/Si substrates by using the polymeric precursor method: Structural, microstructural and electrical properties

c-axis oriented Bi3.25La0.75Ti3O12 (BLT) thin films were grown on a RuO2 top electrode deposited on a (100) SiO2/Si substrate by the polymeric precursor method. X-ray diffraction and atomic force microscope investigations indicate that the films exhibit a dense, well crystallized microstructure having random orientations with a rather smooth surface morphology. The electrical properties of preferred oriented Bi3.25La0.75Ti3O12 (BLT) thin films deposited on RuO2 bottom electrode leaded to a large remnant polarization (P-r ) of 17.2 mu C/cm(2) and (V-c ) of 1.8 V, fatigue free characteristics up to 10(10) switching cycles and a current density of 2.2 mu A/cm(2) at 5 V. We found that the polarization loss is insignificant with nine write/read voltages at a waiting time of 10,000 s. Independently of the applied electric field the retained switchable polarization approached a nearly steady-state value after a retention time of 10 s.