Qualidade fisiológica de sementes de soja cultivada em rotação com milheto

Para o sucesso do plantio direto há necessidade de que a cultura antecessora à principal seja boa produtora e mantenedora de cobertura vegetal. O milheto tem-se constituído em boa opção de cultivo no outono/inverno para rotação com soja, porém não há estudos avaliando o efeito do sistema na qualidade das sementes. O objetivo do trabalho foi estudar o efeito de três épocas de semeadura e cinco manejos com ceifas do milheto sobre a qualidade fisiológica de sementes de soja cultivada em sucessão, por plantio direto, na mesma área, por três ciclos de rotação (1999/2000; 2001/2002 e 2002/2003). As épocas de semeadura constituíram três experimentos (E1, E2 e E3), em delineamento experimental de blocos ao acaso com cinco tratamentos (M1 = ceifa a cada florescimento e retirada da massa vegetal; M2 = ceifa a cada florescimento e permanência da massa vegetal; M3 = ceifa no florescimento e retirada da massa vegetal; M4 = ceifa no florescimento e permanência da massa vegetal e M5 = sem ceifa até a produção de grãos, quando foi cortada a panícula, permanecendo o restante da massa vegetal), e quatro repetições. Os experimentos de milheto foram semeados em 1999: E1 = 05/03, E2 = 25/03 e E3 = 19/04; em 2001 = E1 = 17/04, E2 = 07/05 e E3 = 27/05, e em 2002: E1 = 25/04, E2 = 15/05 e E3. = 05/06. em cada ciclo de rotação, a soja foi implantada nos três experimentos na mesma data após o manejo final do milheto com dessecação química; as colheitas foram realizadas na mesma data, também. As sementes de soja, cv. Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)-48, foram avaliadas quanto ao tamanho, massa de 100 sementes, teor de água, germinação e vigor. Sementes de soja com melhor qualidade fisiológica foram obtidas, nos três ciclos de sucessão, quando cultivada após a primeira época de semeadura do milheto, independentemente do manejo com ceifas do milheto, cujo efeito foi pouco evidente.

Alterações de alguns atributos físicos e das frações húmicas de um Nitossolo vermelho na sucessão milheto-soja em sistema plantio direto

No Estado de São Paulo, restrições do regime de chuvas no período de outono-inverno e temperaturas elevadas limitam a produção e a manutenção de cobertura no solo, tornando importante estudar alternativas para a implantação eficaz do Sistema Plantio Direto nesse Estado, especialmente para produção de fitomassa e manejo adequado para maior persistência da palha, em quantidade suficiente para melhoria da qualidade física e da matéria orgânica do solo. O experimento, conduzido em Nitossolo Vermelho distroférrico, na Fazenda Experimental Lageado-FCA-UNESP-Botucatu, teve por objetivo estudar no sistema plantio direto as prováveis alterações de alguns atributos físicos e das frações húmicas do solo com a utilização do milheto, verificando sua resposta, em três épocas de semeadura e sob cinco manejos dos resíduos, após cinco anos de estabelecida essa sucessão. O delineamento experimental foi o de blocos casualizados, com esquema de parcelas subdivididas, com quatro repetições. As parcelas foram representadas por três épocas de semeadura da cultura do milheto: época 1 (E1), época 2 (E2) e época 3 (E3). As subparcelas foram representadas por manejos da ceifa da fitomassa, sendo: manejo 1 (M1) - ceifa a cada florescimento e retirada da fitomassa; manejo 2 (M2) - ceifa a cada florescimento e permanência da fitomassa; manejo 3 (M3) - ceifa apenas no primeiro florescimento e retirada da fitomassa; manejo 4 (M4) - ceifa apenas no primeiro florescimento e permanência da fitomassa; e manejo 5 (M5) - livre crescimento. Foram coletadas amostras de solo com estrutura indeformada para realização das análises físicas, para as quais as profundidades amostradas foram: 0-0,05, 0,05-0,10 e 0,10-0,20 m. Para fracionamento químico da matéria orgânica, as profundidades foram de 0-0,05 e 0,05-0,10 m. em relação às culturas, avaliou-se a produtividade da soja, e para o milheto, a quantidade de matéria seca produzida pela parte aérea e a percentagem de fitomassa em cobertura deixada sobre o solo. A produtividade de matéria seca do milheto decresceu na ordem E1 > E2 > E3. A densidade do solo, a macroporosidade, a microporosidade e a porosidade total variaram com a época de semeadura do milheto. A adição contínua de fitomassa com ceifa a cada florescimento e permanência da cobertura proporcionou maior incremento nas frações menos estáveis da matéria orgânica (ácido húmico e ácido fúlvico). Recomenda-se, diante das condições edafoclimáticas estudadas, a semeadura do milheto na segunda e terceira épocas com ceifa apenas no primeiro florescimento, sempre se utilizando da permanência da fitomassa, para obter melhor cobertura, qualidade física do solo (menor densidade do solo, maior porosidade total) e maior produtividade para soja.

TNFa-e microsatellite, HLA-DRB1 and-DQB1 alleles and haplotypes in Brazilian patients presenting recently diagnosed type 1 diabetes mellitus

TNF microsatellite and HLA class II polymorphisms were studied in 28 recently diagnosed Brazilian patients presenting type 1 diabetes mellitus (T1DM) and in 120 healthy controls. TNFa-e and HLA-DRB1/DQB1 alleles were identified using sets of sequence-specific primers. Compared to controls, the DRB1* 03 and DQBI*02 allele groups, TNFa1 allele, and the TNFa4-b5-c1-d4-e3 and TNFa10-b5-c1-d4-e3 haplotypes were overrepresented in patients. TNF microsatellite together with HLA polymorphisms is associated with type 1 diabetes in Brazilian patients, corroborating the participation of the MHC genes in disease susceptibility.

Method for determination of vertical bar U(e)3 vertical bar in neutrino oscillation appearance experiments

We point out that determination of the MNS matrix element \U-e3\ = s(13) in long-baseline nu(mu) --> nu(e) neutrino oscillation experiments suffers from large intrinsic uncertainty due to the unknown CP violating phase delta and sign of Deltam(13)(2). We propose a new strategy for accurate determination of theta(13); tune the beam energy at the oscillation maximum and do the measurement both in neutrino and antineutrino channels. We show that it automatically resolves the problem of parameter ambiguities which involves delta, theta(13), and the sign of Deltam(13)(2). (C) 2002 Elsevier B.V. B.V. All rights reserved.

Tolerance to the air exposition test of Hoplias lacerdae larvae and juvenile during its initial development

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Maturação de sementes de aveia-preta (Avena strigosa Schreb). II. Maturidade da panícula e da espigueta

The present work aims at defining the panicle and spikelet maturity of Avena strigosa Schreb. Four experiments were carried out under field conditions during 1989 (E1 and E2) and 1990 (E3 and E4) in Botucatu county, São Paulo State, Brazil. The sowings were made in 04.19.89 (E1) and 06.18.89 (E2). Maturity of panicle was evaluated by weekly (E1) or biweekly harvests (E2) beginning at total emergence of the panicle. In E3 and E4, sowing was made in 06.04.90 and each experiment had a single harvest date (E3 = 11.01.90 and E4 = 11.07.90). After harvest, the spikelets with similar stage of development were grouped and evaluated. Based on dry matter accumulation and germination percentage of the seeds, it was observed that the maturity of the seeds in the panicle was reached at 28 and 35 days after total emergence of the panicle in the April sowing, and between 24.5 and 28 days in the June sowing. During this period a few percentage of panicles not yet yellow became all yellow, the cariopsis at semi-hard stage became hard and moisture of the seeds dropped from 32% to 12%. The maturity of the seeds in the spikelet was reached when the glumes changed their color from yellowish to yellow, the lemma and palea changed from yellow with black strips to black, the cariopsis changed from farinaceous stage to semi-hard and the moisture content of the seeds changed from 40% to 25%.

6-[omega-arylalkenyl]-5,6-dihydro-alpha-pyrones from Cryptocarya moschata (Lauraceae)

Eleven 6-[omega-arylalkenyl]-5,6-dihydro-alpha-pyrones, cryptomoscatones D2, E1, E2, E3 and F1 and cryptopyranmoscatones A1, A2, A3, B1, B2 and B4, in addition to goniothalamin and cryptofolione, were isolated from branch and stem bark of Cryotocarya moschata, Lauraceae. Their structures were established by spectroscopic methods. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

INFLUENCE of HIP EXTERNAL ROTATION on HIP ADDUCTOR and RECTUS FEMORIS MYOELECTRIC ACTIVITY DURING A DYNAMIC PARALLEL SQUAT

Pereira, GR, Leporace, G, Chagas, DV, Furtado, LFL, Praxedes, J, and Batista, LA. Influence of hip external rotation on hip adductor and rectus femoris myoelectric activity during a dynamic parallel squat. J Strength Cond Res 24(10): 27492754, 2010-This study sought to compare the myoelectric activity of the hip adductors (HAs) and rectus femoris (RF) when the hip was in a neutral position or externally rotated by 30 degrees or 50 degrees (H0, H30, and H50, respectively) during a parallel squat. Ten healthy subjects performed 10 repetitions of squats in each of the 3 hip positions and the myoelectric activities of the HAs and RF were recorded. The signal was then divided into categories representing concentric (C) and eccentric (E) contractions in the following ranges of motion: 0-30 degrees (C1 and E1), 30-60 degrees (C2 and E2), and 60-90 degrees (C3 and E3) of knee flexion. From those signals, an root mean square (RMS) value for each range of motion in each hip position was obtained. All values were normalized to those obtained during maximum voluntary isometric contraction. We found that HAs showed a significant increase in myoelectric activity during C3 and E3 in the H30 and H50 positions, as compared with H0. Meanwhile, RF activity did not significantly differ between hip positions. Both muscles showed higher activation during 60-90 degrees (C3 and E3) of knee flexion, as compared with 0-30 degrees (C1 and E1) and 30-60 degrees (C2 and E2). The results suggest that if the aim is to increase HA activity despite the low percentage of muscle activation, squats should be performed with 30 degrees of external rotation and at least 90 degrees of knee flexion.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.

The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.

Alterações de propriedades físicas de um nitossolo vermelho pela sucessão milheto-soja na fase de implantação do sistema de semeadura direta

The aim of this work was to evaluate the effect of a millet-soybean rotation, during the implantation phase of no-tillage system on the physical properties of a Nitossolo Vermelho distroférrico and the dry mass production of millet and the productivity of soybean. The experimental design used was a randomized blocks, in a split splot arrangement, with four replications. The parcels was constituted by three sowings (E1, E2 and E3) and the subparcels was constituted by harvests, where each harvest handling was: M1 - harvest each blooming and covering withdrawal; M2 - harvest each blooming and covering permanency; M3 - only in the first harvest on blooming and covering withdrawal; M4 - only in the first harvest on blooming and covering permanency, and M5-free growing, with no harvest. Samples were collected from three soil layers: 0-0,05, 0,05-0,10 and 0,10-0,20 m. The E2 showed smaller values of soil density and larger values of total porosity. The E3 resulted in smaller values of flocculation degree and mean weight diameter of the aggregates. The E3 showed smaller production of dry mass.

Biomass production and chemical composition of essential oil of Piper callosum as affected by spacing in Manaus, Amazonas State, Brazil

The family Piperaceae contains nearly 2000 species, most of them distributed in two genera, Piper and Peperomia. In Brazil circa 170 Piper species are found, mainly in tropical areas Their use ranges from flavoring and culinary to raw material for pharmaceutical and cosmetic industry. One of these species, Piper callosum, is used in folk medicine in the Amazon area. The objective of this study was to evaluate the production of biomass (aerial parts) as well as yield and composition of the essential oil from the leaves, according to different spacing between cultivated plants at Embrapa Western Amazon, in Manaus, State of Amazonas, Brazil. The experimental design was randomized blocks, with four treatments and seven replicates with six plants. Biomass production was inversely proportional to the spatial arrangements, with the greatest biomass production (1034.93 kg/ha) in the shortest spacing (E1), although no statistical difference was verified between E3 and E4. The same response was observed for the production of essential oil. The chemical composition of the oil was not affected by spacing, and major compounds found were safrole (59.1%), beta-pinene (8.3%), alpha-pinene (6.5%), methyl eugenol (6.3%) and 1,8-cineole (4.1).

Scales, Universality and Finite-Range Correction in Three-body Systems

The scale invariance manifested by the weakly-bound Efimov states implies that all the Efimov spectrum can be merged in a single scaling function. By considering this scaling function, the ratio between two consecutive energy levels, E3 (N+1) and E3 (N), can be obtained from a two-body low-energy observable (usually the scattering length a), given in units of the three-body energy level N. The zero-ranged scaling function is improved by incorporating finite range corrections in first order of r0/a (r0 is the potential effective range). The critical condition for three-identical bosons in s-wave, when the excited E3 (N+1) state disappears in the 2 + 1 threshold, is given by √E2/E3 (N) ≈ 0.38+0.12(r0/a). © 2012 Springer-Verlag.

Épocas de adubação nitrogenada na cultura do milho e sua influência na cultura subsequente, girassol, em sistema de semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Épocas de semeadura e manejos de corte de milheto cultivado no outono-inverno e efeitos na cultura da soja em sucessão sob plantio direto

Pós-graduação em Agronomia (Agricultura) - FCA