Enantioselective Analysis of Fluoxetine and Norfluoxetine by LC in Culture Medium for Application in Biotransformation Studies Employing Fungi

A liquid chromatography method is described for the analysis of fluoxetine and norfluoxetine enantiomers in fungi cultures. The analytes were separated simultaneously by LC employing a serial system. The resolution was performed using a mobile phase of ethanol: 15 mM ammonium acetate buffer solution, pH 5.9: acetonitrile (77.5:17.5:5, v/v/v). UV detection was at 227 nm. Hexane: isoamyl alcohol (98:2, v/v) was used as extractor solvent. The calibration curves were linear over the concentration range of 12.5-3,750 ng mL(-1) (r a parts per thousand yen 0.996). The values for intra- and inter-day precision and accuracy were a parts per thousand currency sign10% for all analytes. The validated method was used to evaluate fluoxetine biotransformation to its mammalian metabolite, norfluoxetine, by selected endophytic fungi. Although the desired biotransformation was not observed in the conditions used here, the method could be used to evaluate the biotransformation of fluoxetine by other fungi or to be extended to other matrices with adequate procedures for sample preparation.

Enantioselective analysis of praziquantel and trans-4-hydroxypraziquantel in human plasma by chiral LC-MS/MS: Application to pharmacokinetics

A simple enantioselective method for the determination of praziquantel (PZQ) and trans-4-hydroxypraziquantel (4-OHPZQ) in human plasma was developed and validated by high-performance liquid chromatography/mass spectrometry. The plasma samples were prepared by liquid-liquid extraction using a mixture of methyl-tert-butylether/dichloromethane (2:1, v/v) as extraction solvent. The direct resolution of PZQ and 4-OHPZQ enantiomers was performed on a Chiralpak AD column using hexane-isopropanol (75:25, v/v) as the mobile phase. Diazepam was used as internal standard. The method described here is simple and reproducible. The quantitation limit of 1.25 ng/ml for each PZQ enantiomer and of 12.5 ng/ml for each 4-OHPZQ enantiomer permits the use of the method in studies investigating the kinetic disposition of a single dose of 1.5g racemic PZQ. Enantioselectivity in the kinetic disposition of PZQ and 4-OHPZQ was observed in the clinical study. with the demonstration of a higher proportion of the (+)-(S)-PZQ and (-)-(R)-4-OHPZQ enantiomers in plasma. (C) 2009 Elsevier B.V. All rights reserved.

Mercury speciation in seafood samples by LC-ICP-MS with a rapid ultrasound-assisted extraction procedure: Application to the determination of mercury in Brazilian seafood samples

This paper describes a simple method for mercury speciation in seafood samples by LC-ICP-MS with a fast sample preparation procedure. Prior to analysis, mercury species were extracted from food samples with a solution containing mercaptoethanol, L-cysteine and HCl and sonication for 15 min. Separation of mercury species was accomplished in less than 5 min on a C8 reverse phase column with a mobile phase containing 0.05%-v/v mercaptoethanol, 0.4% m/v L-cysteine and 0.06 mol L(-1) ammonium acetate. The method detection limits were found to be 0.25, 0.20 and 0.1 ng g(-1) for inorganic mercury, ethylmercury and methylmercury, respectively. Method accuracy is traceable to Certified Reference Materials (DOLT-3 and DORM-3) from the National Research Council Canada (NRCC). With the proposed method there is a considerable reduction of the time of sample preparation. Finally, the method was applied for the speciation of mercury in seafood samples purchased from the Brazilian market. (C) 2010 Elsevier Ltd. All rights reserved.

Simultaneous Analysis of Tramadol, O-Desmethyltramadol, and N-Desmethyltramadol Enantiomers in Rat Plasma by High-Performance Liquid Chromatography-Tandem Mass Spectrometry: Application to Pharmacokinetics

Tramadol (T) is available as a racemic mixture of (+)-trans-T and (-)-trans-T. The main metabolic pathways are O-demethylation and N-demethylation, producing trans-O-desmethyltramadol (M1) and trans-N-desmethyltramadol (M2) enantiomers, respectively. The analgesic effect of T is related to the opioid activity of (+)-trans-T and (+)-M1 and to the monoaminergic action of (+/-)-trans-T. This is the first study using tandem mass spectrometry as a detection system for the simultaneous analysis of trans-T, M1, and M2 enantiomers. The analytes were resolved on a Chiralpak (R) AD column using hexane: ethanol (95.5:4.5, v/v) plus 0.1% diethylamine as the mobile phase. The quantitation limits were 0.5 ng/ml for trans-T and M1 and 0.1 ng/ml for M2. The method developed and validated here was applied to a pharmacokinetic study in rats. Male Wistar rats (n = 6 at each time point) received a single oral dose of 20 mg/kg racemic trans-T. Blood samples were collected up to 12 h after drug administration. The kinetic disposition of trans-T and M2 was enantioselective (AUC((+)/(-)) ratio = 4.16 and 6.36, respectively). The direction and extent of enantioselectivity in the pharmacokinetics of trans-T and M2 in rats were comparable to data previously reported for healthy volunteers, suggesting that rats are a suitable model for enantioselective studies of trans-T pharmacokinetics. Chirality 23: 287-293, 2011. (C) 2010 Wiley-Liss, Inc.

Determination of Cyclophosphamide Enantiomers in Plasma by LC-MS/MS: Application to Pharmacokinetics in Breast Cancer and Lupus Nephritis Patients

This article describes the enantioseleclive analysis of cyclophosphamide (CPA) in human plasma using LC-MS/MS. CPA enantiomers were extracted from plasma using a mixture of ethyl acetate and chloroform (75:25, v/v). The enantiomers were separated on a Chiralcel(R) OD-R column, with the mobile phase consisting of a mixture of acetonitrile and water (75:25, v/v) plus 0.2% formic acid. The protonaled ions and their respective product ions were monitored using two functions, 261 > 141 for CPA enantiomers and 189 > 104 for the internal standard (antipyrine). Recovery rates were higher than 95% and the quantification limit was 2.5-ng/ml plasma for both enantiomers. The coefficients of variation and the relative errors obtained for the validation of intra- and interassay precision and accuracy were less than 10%. The method was applied for the investigation of the enantioselective pharmacokinetics of CPA in a lupus nephritis patient treated with 1 g CPA infused over 2 h and in a breast cancer patient treated with 0.9 g infused over 1 h. No stereoselectivity in the pharmacokinetic parameters was observed for either patient. Clearance values of 2.63 and 2.93 l/h and of 3.36 and 3.61 l/h for (-)-(S) and (+)-(R)-CPA were obtained for the breast cancer and lupus nephritis patient., respectively. Chirality 21:383-389, 2009. (C) 2008 Wiley-Liss, Inc.

Stereoselective Analysis of Labetalol in Human Plasma by LC-MS/MS: Application to Pharmacokinetics

Labetalol is clinically available as a mixture of two racemates (four stereoisomers). The stereoisomer (R,R) has as main activity the beta(1)-antagonism and the stereoisomer (S,R) is highly selective for the alpha(1) adrenoceptor and is responsible for most of the alpha-blocker activity. In the present investigation, a method for the analysis of labetalol stereoisomers in human plasma was developed and applied to pharmacokinetic studies. Plasma samples (0.5 ml) were extracted with methyl tert-butyl ether at pH 9.5. The four labetalol stereoisomers were analyzed by LC-MS/MS on a Chirobiotic (R) V column using a mobile phase consisting of methanol, acetic acid, and diethylamine, with a recovery of more than 90% for all four. The quantitation limit was 0.5 ng/ml and linearity was observed at 250 ng/ml plasma for each stereoisomer. Studies of precision and accuracy presented coefficients of variation and percentage inaccuracy of less than 15%, indicating that the method is precise and accurate. The method was applied to the study of the kinetic disposition of labetalol over a period of 12 h after oral administration of a single 100 mg dose to a hypertensive pregnant woman. The clinical study revealed stereoselectivity in the pharmacokinetics of labetalol, with a lower plasma proportion for the active stereoisomers (R,R)-labetalol and (S,R)-labetalol. The stereoselectivity observed after oral administration is due to the hepatic metabolism and the first pass effect, with an AUC((R,R))/AUC((S,S)) ratio of 0.5. Chirality 21:738-744, 2009. (C) 2008 Wiley-Liss, Inc.

A mobile health care rule-based system

The relation between patient and physician in most modern Health Care Sys- tems is sparse, limited in time and very in exible. On the other hand, and in contradiction with several recent studies, most physicians do not rely their patient diagnostics evaluations on intertwined psychological and social nature factors. Facing these problems and trying to improve the patient/physician relation we present a mobile health care solution to im- prove the interaction between the physician and his patients. The solution serves not only as a privileged mean of communication between physicians and patients but also as an evolutionary intelligent platform delivering a mobile rule based system.

A mobile systems interface protocol

Recent progresses in the software development world has assisted a change in hardware from heavy mainframes and desktop machines to unimaginable small devices leading to the prophetic "third computing paradigm", Ubiquitous Computing. Still, this novel unnoticeable devices lack in various capabilities, like computing power, storage capacity and human interface. Connectivity associated to this devices is also considered an handicap which comes generally associated expensive and limited protocols like GSM and UMTS. Considering this scenario as background, this paper presents a minimal communication protocol introducing better interfaces for limited devices. Special attention has been paid to the limitations of connectivity, storage capacity and scalability of the developed software applications. Illustrating this new protocol, a case-study is presented addressing car sensors communicating with a central

Innovation and adoption of mobile technology in public organizations: the IBGE case

The use of Mobile and Wireless Information Technologies (MWIT) for provisioning public services by a government is a relatively recent phenomenon. This paper evaluates the results of MWIT adoption by IBGE (The Brazilian Institute of Geography and Statistics) through a case study. In 2007, IBGE applied 82,000 mobile devices (PDAs) for data gathering in a census operation in Brazil. A set of challenges for a large scale application of MWIT required intensive work involving innovative working practices and service goals. The case reveals a set of outputs of this process, such as time and cost reductions in service provision, improved information quality, staff training and increased organizational effectiveness and agility.

Personalized sightseeing tours support using mobile devices

In this paper, we present PSiS (Personalized Sightseeing Tours Recommendation System) Mobile. PSiS Mobile is our proposal to a mobile recommendation and planning support system, which is designed to provide effective support during the tourist visit with context-aware information and recommendations about places of interest (POI), exploiting tourist preferences and context.

PSiS Mobile

In this paper, we present a state of the art on applications of mobile devices to support decision of a tourist running on a trip. We focus on two types of applications, tourism recommendation and tourism guide, making a brief description of the main characteristics of each one of them. We also refer the main problems encountered on the development of applications for mobile devices, and present PSiS (Personalized Sightseeing Tours Recommendation System) Mobile, our proposal to a mobile recommendation and planning support system, which is designed to provide an effective support during the tourist visit, providing contextaware information and recommendations about places of interest (POI) to visit, based on tourist preferences and his current context.

Novopca mobile

A constante evolução da tecnologia obriga a que o mundo empresarial tenha que alocar esforços para se manter actualizado. Os equipamentos tecnológicos que se encontram actualmente na vanguarda da tecnologia são os dispositivos móveis, que cada vez mais nos rodeiam e acompanham com o intuito de nos facilitar a execução de tarefas rotineiras. O ramo de construção e obras públicas em particular é um sector que obriga a que os seus trabalhadores estejam constantemente em movimento, e que muito têm a ganhar com a utilização de ferramentas de trabalho em equipamentos móveis. Neste projecto pretendeu-se identificar qual o sistema operativo para dispositivos móveis que melhor se enquadra com as necessidades empresariais, assim como quais os mecanismos de comunicação inter-máquinas que melhor se enquadram com o cenário em estudo. Foi então desenvolvida uma plataforma para dispositivos móveis que permite agilizar a execução de processos que normalmente são morosos ou que obrigam à utilização do computador em locais menos próprios, nomeadamente o ambiente de obra. A solução proposta e implementada envolve uma aplicação modular quer permita a fácil inserção e remoção de módulos. Foram também realizados os estudos e implementações de quatro módulos, designadamente: auto-afectação, conferência documental, fornecedores e presenças em obra. Concluído este projecto, ficam reunidas as condições para o fácil desenvolvimento de novos módulos, visando inovação e optimização dos processos de trabalho da empresa.

PSiS mobile

Os sistemas de recomendação têm vindo a ser cada vez mais utilizados nos últimos anos. Por isso, é imprescindível que estes sistemas se adaptem à evolução da sociedade incluindo cada vez mais novas funcionalidades, tais como a adaptação do sistema ao contexto da pessoa. Esta adaptação pode ser feita através de, por exemplo, dispositivos móveis, que têm vindo a apresentar uma taxa de crescimento de vendas muito grande. Dada a crescente integração dos sistemas de recomendação com os sistemas móveis, foi elaborado um estudo sobre o estado da arte dos sistemas de auxílio ao turista que utilizam dispositivos móveis, sendo apresentadas as suas vantagens e desvantagens. Estes sistemas móveis de auxílio a turistas foram divididos em dois grupos: os que apresentam apenas a informação sobre pontos de interesse e os sistemas que são capazes de efectuar recomendações, com base no perfil do turista. Um breve estudo sobre os sistemas operativos para dispositivos móveis é apresentado, sendo especialmente focado o sistema operativo Android que foi o escolhido para esta implementação. Como os dispositivos móveis, actualmente, ainda possuem várias limitações, estas foram descritas e apresentadas as boas práticas no desenvolvimento de aplicações para este tipo de sistemas. É também apresentado um estudo que visa descobrir qual é o método mais leve e mais rápido para trocar dados entre a parte servidora e a parte móvel. Com a parte introdutória apresentada, é exposto o projecto desenvolvido nesta tese, o PSiS Mobile. Este sistema é um módulo que faz parte do projecto PSiS e pretende trazer todas as vantagens dos sistemas móveis para o sistema base já implementado. O projecto PSiS foca-se no estabelecimento de planos de visita personalizados com indicação de percursos para turistas com tempo limitado. Apoiando a definição de planos de visitas de acordo com o perfil do turista (interesses, valores pessoais, desejos, restrições, deficiências, etc.) combinando os produtos de turismo mais adequados (locais de interesse, eventos, restaurantes, etc.) em itinerários eficientes. A utilização de dispositivos móveis para acompanhamento da visita permite uma rápida interacção entre o turista e o sistema. Assim, o PSiS poderá recolher informação contextual do utilizador para que o perfil do mesmo seja enriquecido. O sistema apresentado é composto por duas partes: a parte cliente e a parte servidora. Toda a informação, como por exemplo o perfil do turista, histórico de viagens e valores de similaridade entre utilizadores está presente na parte servidora. O processo de recomendação também é efectuado pela aplicação servidora, sendo esta a responsável pela atribuição de uma classificação aos pontos de interesse tendo em conta o perfil do utilizador em causa. A base de dados do PSiS possui toda a informação relativa aos pontos de interesse numa determinada cidade ou região e o portfólio completo do histórico de visitas de cada utilizador. A componente móvel é uma parte muito importante para o sistema, pois interage com o utilizador no terreno. Um dispositivo móvel como o PDA, não só permite a apresentação de informação relevante ao utilizador, como também permite a recolha automática de informação contextual (por exemplo, a localização). Toda esta informação contribui para a definição de um perfil completo e para uma melhor adaptação do sistema às necessidades do utilizador. De forma a nem sempre estar dependente do servidor, a aplicação móvel possui rotinas para a realização de recomendações básicas. Ou seja, a aplicação móvel não realiza a classificação dos pontos de interesse, mas apenas mostra os principais resultados já formados pela parte servidora. Por exemplo, se um utilizador gostar de comida Chinesa, um restaurante Chinês nas imediações irá ter uma boa classificação e, por isso, ser recomendado. A aplicação móvel mostra ao turista o percurso definido para o dia em que o mesmo se encontra, sendo feito o rastreio do trajecto que o mesmo efectua. Assim, o sistema consegue saber se o horário do planeamento está a ser cumprido ou não. Caso não esteja, é invocado um algoritmo de planeamento que irá tentar corrigir o atraso ou o adiantamento perante o horário inicial. Depois de visitar um ponto de interesse, é pedido ao utilizador para fornecer feedback sobre o mesmo. Se desejado também é possível mostrar os pontos de interesse existentes perto do turista (usando as coordenadas GPS obtidas pelo dispositivo móvel) organizados por categorias, raio de distância, etc. Apesar dos dispositivos móveis possuírem várias restrições, pretendeu-se proporcionar ao utilizador uma boa experiência, através de uma aplicação rápida, de fácil utilização e adaptável, incluindo funcionalidades de planeamento, realidade aumentada e integração com a rede social do sistema. Todos estes factores contribuem para a disponibilização de informação detalhada ao turista.

Exploração de dados de uma solução mobile wallet usando as técnicas de data mining

A descoberta de conhecimento em dados hoje em dia é um ponto forte para as empresas. Atualmente a CardMobili não dispõe de qualquer sistema de mineração de dados, sendo a existência deste uma mais-valia para as suas operações de marketing diárias, nomeadamente no lançamento de cupões a um grupo restrito de clientes com uma elevada probabilidade que os mesmos os utilizem. Para isso foi analisada a base de dados da aplicação tentando extrair o maior número de dados e aplicadas as transformações necessárias para posteriormente serem processados pelos algoritmos de mineração de dados. Durante a etapa de mineração de dados foram aplicadas as técnicas de associação e classificação, sendo que os melhores resultados foram obtidos com técnicas de associação. Desta maneira pretende-se que os resultados obtidos auxiliem o decisor na sua tomada de decisões.

Handling mobility on a QoS-Aware servicebased framework for mobile systems

Mobile applications are becoming increasingly more complex and making heavier demands on local system resources. Moreover, mobile systems are nowadays more open, allowing users to add more and more applications, including third-party developed ones. In this perspective, it is increasingly expected that users will want to execute in their devices applications which supersede currently available resources. It is therefore important to provide frameworks which allow applications to benefit from resources available on other nodes, capable of migrating some or all of its services to other nodes, depending on the user needs. These requirements are even more stringent when users want to execute Quality of Service (QoS) aware applications, such as voice or video. The required resources to guarantee the QoS levels demanded by an application can vary with time, and consequently, applications should be able to reconfigure themselves. This paper proposes a QoS-aware service-based framework able to support distributed, migration-capable, QoS-enabled applications on top of the Android Operating system.