Application of a building cost estimation model to the appraisal of the churches damaged by earthquakes in Lorca (Spain)

The objective of this paper is the development of a building cost estimation model whose purpose is to quickly and precisely evaluate rebuilding costs for historic heritage buildings affected by catastrophic events. Specifically, this study will be applied to the monumental buildings owned by the Catholic Church that were affected by two earthquakes on May 11, 2011 in the town of Lorca. To estimate the initial total replacement cost new, calculation model will be applied which, on the one hand, will use two-dimensional metric exterior parameters and, on the other, three-dimensional interior cubic parameters. Based on the total of the analyzed buildings, and considering damage caused by the seismic event, the final reconstruction cost for the building units ruined by the earthquakes can be estimated. The proposed calculation model can also be applied to other emergency scenarios and situations for the quick estimation of construction costs necessary for rebuilding historic heritage buildings which have been affected by catastrophic events that deteriorate or ruin their structural or constructive configuration.

First steps of Roman Cement in Spain

Natural cement was patented in 1796 but it didn’t arrive in Spain until 1835. No one knows exactly where the production started in Spain, because it emerged independently at the same time in many places. Most of these outbreaks are concentrated in the north and northwest of Spain: Basque Country (Zumaya and Rezola) and Catalonia (San Celoní and San Juan de las Abadesas).Natural cement was extensively used to decorate historical buildings during the nineteenth and beginning of twentieth century in Madrid. It was the building material which realised the architects and builders dreams of mass-produced cast elements in a wide variety of styles. Its arrival replaced traditional materials that were used previously (lime, gypsum and hydraulic limes). However, its use was not extended in time, and soon it was replaced by the use of artificial Portland cements. During 20th century this building material disappeared from use. What remains is it’s memory, in thousands and thousands of “stone witnesses” in our cities. Final properties of the cement largely depend on raw materials used and its combustion temperature. However, it was characterised by an easily implementation on facade masonry, fast-setting (about 15 minutes), good resistance , an agreeable structural consistency and colour.This article aims to show first steps, evolution and decay of Natural Cement Industry in Spain and its application in Madrid.

Alfredo Payá. Alicante, Spain

In his retreat in Alicante, where he gives calm and deliverate classes at the city's new architecture school , ALFREDO PAYA ls a serene and centered architect who transmits these qualities through the buildings he constructs .

Enhanced radon emission in natural CO2 flows in Campo de Calatrava region (central Spain)

Activity of radon gas in natural soils is commonly low (in the order of few thousands of Bq·m-3) due to the fast decay (half-life= 3.8 days in the case of 222Rn) that prevents accumulation in soil pores. Exceptionally, high Rn soil activity (up to 430 KBq·m-3) is found around point sources of deep CO2 fluxes. These fluxes allow the transport of trace gases (including Rn) to long distances in the geosphere leading to a potential hazard as Rn accumulation in buildings. CO2 degassing is common in active or ancient volcanic fields and occurs as free gas fluxes or dissolved in groundwater. In this work, the occurrence of Rnbearing, CO2 fluxes from the Campo de Calatrava region in Central Spain has been studied in order to determine their (1) magnitude, (2) migration paths and (3) potential impact on the environment, and (4) methodologies to best detection and measurement.

Domes of adobe and stone on the rural architecture of centre of Castilla y León (Spain)

In the centre of Castilla y León (extensive zone of Spain) still there are some examples of the old rural buildings linked to the economic activities that have been developed in the agrarian field. These are called chozos and casetas, and they have been erected with domed solutions using the autochthonous materi-als: the mud in the region of Tierra de Campos and the stone in the region of Montes Torozos. The influence of traditional construction techniques of both elements has generated a singular typological range rarely seen in the rest of the Península Ibérica. All different types of domes found in this place will be explained from its construction process, adding its structural capacity and energy bioclimatic qualities. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- En el centro de Castilla y León todavía se mantienen algunos ejemplos de antiguas construcciones rurales vinculadas a las actividades económicas que se han desarrollado en el ámbito agrario. Éstas, conocidas como chozos y casetas, han sido ejecutadas con soluciones cupuliformes empleándose los materiales que más a mano se disponen, siendo el barro más característico en la región de Tierra de Campos y la piedra en la comarca de Montes Torozos. La influencia de las técnicas constructivas tradicionales de ambos elementos ha generado un abanico tipológico singular poco visto en el resto de la península. Los diferentes tipos de cúpulas encontrados se explicarán desde su proceso constructivo, añadiendo su capacidad estructural y sus cualidades bioclimáticas.

Assessment of expected damage on buildings subjected to Lorca earthquake through an energy-based seismic index method and nonlinear dynamic response analyses

The city of Lorca (Spain) was hit on May 11th, 2011, by two consecutive earth-quakes of magnitudes 4.6 and 5.2 Mw, causing casualties and important damage in buildings. Many of the damaged structures were reinforced concrete frames with wide beams. This study quantifies the expected level of damage on this structural type in the case of the Lorca earth-quake by means of a seismic index Iv that compares the energy input by the earthquake with the energy absorption/dissipation capacity of the structure. The prototype frames investigated represent structures designed in two time periods (1994–2002 and 2003–2008), in which the applicable codes were different. The influence of the masonry infill walls and the proneness of the frames to concentrate damage in a given story were further investigated through nonlinear dynamic response analyses. It is found that (1) the seismic index method predicts levels of damage that range from moderate/severe to complete collapse; this prediction is consistent with the observed damage; (2) the presence of masonry infill walls makes the structure very prone to damage concentration and reduces the overall seismic capacity of the building; and (3) a proper hierarchy of strength between beams and columns that guarantees the formation of a strong column-weak beam mechanism (as prescribed by seismic codes), as well as the adoption of counter-measures to avoid the negative interaction between non-structural infill walls and the main frame, would have reduced the level of damage from Iv=1 (collapse) to about Iv=0.5 (moderate/severe damage)

Las teorías del gótico y su representación gráfica en España el último tercio del siglo XIX. Un estudio sobre: Some Account of Gothic Architecture in Spain, de George Edmund Street

La tesis se centra en el estudio, descripción y análisis del libro publicado por el arquitecto británico George Edmund Street en 1865, bajo el título Some Account of Gothic Architecture in Spain. El libro dio a conocer una de la colecciones más importantes de dibujos realizada en el siglo XIX sobre la arquitectura gótica española, y por lo tanto fue una primera referencia para su estudio, hasta bien entrado el siglo veinte. El volumen incluyó 107 grabados de diversos tipos de edificios con perspectivas y detalles, y 25 láminas con 45 planos de plantas de iglesias y claustros, muchos de ellos publicados por primera vez. Gracias a varias campañas de verano por la mitad norte del país, la casi inexplorada -desde un punto de vista académico- arquitectura española medieval fue finalmente descubierta. Este hecho conduce a una pregunta intrigante que está en el origen de esta investigación ¿cómo pudo Street en pocos viajes sentar las bases de la historia del gótico español que hasta entonces los estudiosos españoles no habían sido capaces de definir? Esta tesis comienza describiendo la obra de Street en su contexto cultural con un breve repaso a su biografía y a su posición profesional y teórica. También su relación con las personas más representativas que participaron en el estudio de la arquitectura gótica, como Robert Willis, William Whewell, Augustus Pugin, o George G. Scott. Se ha prestado especial atención, en explicar su papel relevante en el Gothic Revival, para entender el significado de su interés en la arquitectura gótica continental. Estos capítulos preliminares son seguidos por una revisión del papel del dibujo como herramienta para la arquitectura de los viajeros en sus rutas en busca de la arquitectura gótica. También se trata la influencia de la Royal Academy y sus académicos, (entre los cuales estuvo Street) y su formación académica. Finalmente la tesis entra en el estudio de los planos arquitectónicos que Street hizo durante sus viajes continentales de arquitectura, seguido por una descripción detallada de sus dibujos de España, analizando su método, su técnica, y las nuevas características aportadas, que fueron una novedad en el contexto español. También se lleva a cabo algunos estudios comparativos de los dibujos de España, gracias a una recopilación exhaustiva de bocetos y dibujos originales de Street, que en su gran mayoría se conservan en los archivos del RIBA, cotejándolos con sus versiones finales, con dibujos de la época de otros autores sobre los mismos edificios, y con fotos recientes. La tesis deja claro por qué y cómo Street, gracias a su soporte teórico y habilidades para el dibujo, pudo realizar algo que había pasado desapercibido para los estudiosos españoles de la época (construcción, historia de los estilos, señalamiento de períodos constructivos), lo que le permitió encontrar el lugar adecuado de la arquitectura gótica española en la historia y en el mapa de la arquitectura gótica europea. ABSTRACT This thesis focuses on the study, description and analysis of the book published by the British architect George Edmund Street in 1865, under the title Some Account of Gothic Architecture in Spain. The book displayed one of the most significant collections of drawings on Spanish Gothic Architecture made in the nineteenth century, and therefore was a first reference for its study, until well into the twentieth century. The book included 107 engravings, the surveying of various types of buildings with perspectives and details, and 25 sheets containing 45 ground plans of churches and cloisters, many of them new and published for the first time. Thanks to several summer campaigns in the north half of the country, the almost unexplored -from a scholar point of view- medieval Spanish architecture was eventually revealed. This fact lead to an intriguing question that is at the origin of this research: how could Street in a few trips lay the foundations of the history of Spanish Gothic that until then Spanish scholars had not been able to define? This thesis begins inscribing this Street's work in his cultural context. A brief review of his biography and professional and theoretical positions has been seen as necessary. Also his debts and relationship with the most representative people involved in the study of Gothic architecture, like Robert Willis, William Whewell, Augustus Pugin, or George G. Scott are discussed. Special attention has been paid, taken into account his relevant role in the Gothic Revival, to understand the significance of his interest in continental Gothic architecture. These preliminary chapters are followed by a review of role of drawing as a tool for Architectural travellers in their Tours in search of the Gothic architecture. The influence of the Royal Academy and its academicians, (among which was Street) and his educational background are here tackled. Eventually this thesis enters into the study of the architectural drawings Street made during his continental architectural journeys, which is followed by a detailed description and analysis of the Spanish ones: his methods, his technique, and the new features which were a novelty in the Spanish context are explored. Also in this thesis is carried out some comparative studies thanks to a previous exhaustive gathering of Street's sketches and original drawings, most of which are preserved in the RIBA archives. Their final versions, drawings of the same buildings from other contemporary draughtsman and pictures of their current state are compared with them. This thesis makes clear why and how Street thanks to his theoretical back-ground and portraying skills could realize what have passed unnoticed by contemporary Spanish scholars (construction, genealogy of forms, dating of periods) allowing him to find the proper place of the Spanish architecture in the history and the map of European Gothic architecture.

Elementos peatonales de las ciudades medias españolas : tipos, orígenes, relaciones y articulaciones

A través de esta tesis se busca aportar un análisis de los elementos peatonales que cubren las necesidades y las infraestructuras de apoyo al peatón, siendo un campo poco desarrollado en nuestro país a diferencia de otros como Dinamarca, Reino Unido, Alemania y Holanda, donde las actuaciones peatonales ejecutadas son tradicionales y muy exitosas. Se trata por tanto de un tema poco estudiado pero que adquiere singular importancia en estos años de búsqueda de nuevos modelos urbanos que eviten el derroche de recursos, y avancen hacia formas de movilidad más adecuadas a un mundo limitado y vulnerable. La investigación tiene un carácter eminentemente descriptivo cuyo principal valor es documentar y analizar sistemáticamente una realidad poco conocida, aportándose datos para entender el origen y desarrollo de las actuaciones peatonales. El propósito es ayudar a cimentar este campo en nuestro país, definiendo con precisión el estado de la cuestión geográficamente y dejando para un futuro una cartografía temática completa. El objeto general es estudiar y comprender los elementos peatonales de un número limitado de ciudades medias españolas, marcándose como objetivos específicos los siguientes: - Identificar y describir los principales elementos que conforman la red peatonal de las ciudades. ‐ Estudiar las tipologías espaciales dominantes, sus características y orígenes, pudiendo distinguir de un lado, las desarrolladas en la ciudad consolidada, como las actuaciones en los cascos antiguos; y por otro, las ejecutadas en la ciudad nueva a través de fórmulas arquitectónicas generalmente residenciales con espacios peatonales adjuntos. ‐ Analizar los referidos elementos para comprobar si han conformado redes de uso peatonal, si se han constituido articulando la ciudad como en el caso de los ejes lineales en las ciudades con río o mar, o si han influenciado el carácter del entorno en el que se han realizado, centrando el interés en los cascos históricos peatonalizados. ‐ Comprobar si hay actuaciones complementarias a los procesos de urbanización y mejora urbanística, así como la aprobación de ayudas y subvenciones para afrontar las mismas. ‐ Finalmente, describir y evaluar los procesos y procedimientos mediante los que se produce la peatonalización de determinadas áreas urbanas, los orígenes, los instrumentos y fechas de su puesta en marcha, aportando una cronología peatonal. La metodología comienza con la acotación de 22 ciudades españolas, capitales de provincia con una población entre 100.000 y 500.000 habitantes según los datos del INE del año 2009. La distribución es equilibrada con la selección de ciudades de costa, de interior, con río/ría, con carácter patrimonial, ciudades en islas, etc. El análisis de los elementos peatonales de estas urbes se realiza gracias a la gran resolución de las bases cartográficas públicas y privadas que hay en la actualidad en internet, especialmente con el uso de las herramientas de Google Earth y Google Maps en su versión “street view”, softwares que permiten un paseo virtual de cada ciudad detallándose con gran precisión las actuaciones peatonales. Las ciudades elegidas son: ‐ 11 ciudades costeras: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián y Tarragona. ‐ 11 ciudades de interior: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid y Vitoria. Finalmente, por tener los porcentajes mas elevados de las áreas peatonales de sus casco histórico, se eligen 3 casos de ciudades representativas para un desarrollo peatonal en profundidad, seleccionándose Burgos, San Sebastián y Pamplona. Otros aspectos metodológicos interesantes a destacar, es la extensa documentación adquirida a través de las fuentes de Internet, sobre todo a la hora de desarrollar el último capítulo “Procesos de peatonalización de las ciudades españolas” centrado en las 3 ciudades elegidas. Se consulta las hemerotecas de periódicos locales, los boletines oficiales, las actas de los plenos de los Ayuntamientos y los documentos de planificación (Planes Generales, Planes Especiales, Planes y Proyectos Municipales, Planes de Movilidad), adquiriéndose una precisa información en cuanto a la cronología de las fechas y extensión del trabajo. Se complementa la metodología con las entrevistas a actores claves en el proceso peatonal, como el personal técnico de los Ayuntamiento y los técnicos redactores de los proyectos; y con la colaboración directa de los técnicos de los consistorios de las 3 ciudades seleccionadas, aportando todo tipo de información demandada. En la tesis, se introduce los elementos peatonales mediante el estudio de los espacios peatonales y los procesos de peatonalización existentes, a través del análisis de la literatura consultada aportándose información valiosa en cuanto a la definición de los modelos peatonales, exponiéndose una breve historia de las peatonalizaciones. Destacan las publicaciones de los expertos europeos en la materia como los autores Carmen Hass-Klau, Rolf Monheim, Rob Krier y Collin Buchanan. En España, las actuaciones peatonales fueron tardías en el tiempo en comparación con el resto de Europa, con casi 40 años de retraso. Las referencias bibliográficas españolas en esta materia son escasas siendo las mas significativas las realizadas por Alfonso Sanz y por el profesor Julio Pozueta destacando una de sus últimas publicaciones “La ciudad paseable” describiéndose los elementos peatonales existentes en las ciudades, sirviendo como modelo y ejemplo para esta investigación. En base a lo anterior, se definen los elementos peatonales como aquellos espacios públicos libres de edificación que, por sus características y diseño, garantizan un confortable uso estancial, de tránsito peatonal y están expresamente reservados para ello. En la tesis se detectan y se especifican los siguientes elementos peatonales: las calles y plazas peatonales, las aceras y bulevares de una anchura superior a 8 metros, los paseos peatonales, los elementos de paso (tradicionales y mecánicos), espacios peatonales ligados a nuevas áreas residenciales, los soportales y pasajes peatonales con una anchura mínima de 4 metros, recintos feriales, espacios libres y zonas verdes y parques. Para cada una de las 22 ciudades seleccionadas se realiza un exhaustivo inventario de los anteriores elementos a través de fichas, aportando un gran número de proyectos individuales ejecutados en cada urbe. Esta información se recoge gráficamente en 2 fotoplanos, conformándose como herramientas fundamentales para esta investigación. El Fotoplano 1 se hace sobre la base de la ciudad del Google Earth diferenciándose las áreas peatonales y las zonas verdes. En el Fotoplano 2, y con el soporte anterior, se distinguen las tipologías persistentes y dominantes como son los grandes ejes peatonales, las redes peatonales locales y los elementos peatonales singulares. Finalmente, a partir de los 2 fotoplanos, se realiza la denominada “Huella peatonal” que destaca por su atractivo y pregnancia, algo de lo que el campo de lo peatonal es muy útil. A través de la huella se obtiene una rápida información al tener el plano dos colores, color naranja para lo peatonal (formado por las áreas peatonales y zonas verdes) y color negro para el resto el resto no peatonal. Toda esta documentación gráfica y descriptiva de los elementos peatonales de cada ciudad, queda ampliamente recogida en el Anexo de la tesis. La “Huella peatonal” se considera como el plano básico en la investigación obteniendo una percepción rápida, clara y visual del espacio peatonal de cada ciudad. Se arroja información morfológica con respecto a la distribución espacial, articulación, equilibrio, modulación, cohesión, concentración peatonal, etc. de cada una de las ciudades seleccionadas. A través de la huella se resuelve muchos de las cuestiones enmarcadas como objetivos de la tesis, comprobándose de forma general, que los elementos peatonales dentro de la trama urbana están desarticulados ya que no hay una estructura que module la ciudad como un conjunto cohesionado. Se localizan pequeñas redes conectadas entre sí, que de forma heterogénea, están dispersas por la ciudad. Se verifica que los elementos peatonales con mayor concentración y presencia en las ciudades analizadas son los ejes peatonales, los cascos históricos y los elementos peatonales en las nuevas áreas residenciales. En la investigación, además de estos 3 elementos mencionados, se analiza con mayor profundidad otros tipos que destacan por su persistencia y repetición en la “Huella peatonal” de cada una de las 22 ciudades, como son las plazas peatonales, los soportales y los elementos singulares peatonales: espacios tradicionales (recintos feriales, pasajes, puentes históricos), nuevos elementos peatonales (pasarelas peatonales, elementos mecánicos de paso), áreas peatonales entorno a edificios culturales y otros casos como los consistentes en la recuperación y transformación de edificaciones y construcciones urbanas de diferente uso y tipología, en nuevas áreas peatonales. Se aporta luz sobre su definición, localización, cronología, proporción, presencia y génesis, facilitando resultados de cada uno de ellos. De forma paralela, se obtiene información de índole cuantitativa a través de las mediciones de la huella, obteniéndose datos y porcentajes de extensión de la ciudad, de las zonas peatonales y de las zonas verdes, de los cascos históricos y de sus superficies peatonales, de los metros lineales de dichos cascos históricos y de sus calles peatonales. Se proporcionan ratios e índices que se consideran fundamentales para una mejor comprensión peatonal de cada urbe. Se establece una clasificación de las ciudades en cada uno de los ámbitos descritos, destacando las ciudades de Pamplona, San Sebastián y Burgos por arrojar las cifras peatonales más positivas encabezando la mayoría de las tablas clasificatorias. La peor ciudad valorada es Alicante, seguida según criterio, de Almería, Palma de Mallorca y Las Palmas de GC. En el capítulo final de la investigación, se eligen las ciudades de Burgos, San Sebastián y Pamplona como casos de estudio representativos. El objetivo es obtener un conocimiento más preciso en cuanto a su origen, cronología y procesos de las peatonalizaciones. Cada ciudad se compone de un cuadro cronológicos por etapas, desarrollándose de forma exhaustiva cada una de ellas, enunciadas normalmente, como instrumentos de planeamiento o proyectos de urbanización, acompañadas de los planos de las actuaciones peatonales. Al final de cada etapa se aportan datos de las cifras de las peatonalizaciones que se van realizando, con un cuadro numérico de localizaciones, superficie peatonal, superficie reurbanizada, longitud peatonal y el grado de peatonalización del casco histórico, además de los datos acumulados por etapa. De las conclusiones cruzadas de estas 3 ciudades, destaca la comprobación de la tendencia de ir peatonalizando los centros antiguos llegando incluso al 100% de calles peatonales en el caso de San Sebastián. No obstante, es difícil confirmar si el objetivo es una peatonalización global de los cascos, ya que son muchas las variables que afectan e influyen en el proceso peatonal de cada ciudad. Se coteja adicionalmente cómo se extiende la cultura peatonal desde el interior al exterior, mas allá de los cascos históricos hacia los ensanches próximos. En cuanto al origen de las peatonalizaciones, se concluye que no hay una concepción inicial y teórica marcada, a partir de la cual se va desarrollando la trama peatonal de cada ciudad. Se puede afirmar que los procesos peatonales ejecutados son variados y de diversa índole, sin poder precisar un hecho como causa principal. Según el momento y las circunstancias, las peatonalizaciones responden a distintas iniciativas promovidas por los comerciantes, por las administraciones locales o por los técnicos de planeamiento, con sus expertas aportaciones en los planes. Estos tres agentes actúan como impulsores de proyectos individuales peatonales que se van solapando en el tiempo. Como punto final de la tesis, se propone una serie de nuevas líneas de investigación que pueden servir como estudio adicional y complementario, respondiendo a aspectos tan relevantes como cuestiones de índole económica, social y de movilidad, fuertemente ligadas a las peatonalizaciones, tal y como se demuestra en la literatura consultada. ABSTRACT This thesis aims to analyse the pedestrian elements dealing with the needs and infrastructures that support pedestrians, as this is a field that is little developed in our country, in comparison to other regions such as Denmark, the United Kingdom, Germany and the Netherlands, where the pedestrian actions implemented are traditional and highly successful. Therefore, even though little research has been done about this topic, this field is increasingly important throughout these years of search for urban models intended to prevent the waste of resources and to develop new mobility ways, more adapted to a limited, vulnerable world. This research is essentially descriptive and it mainly aims to document and systematically analysed a scarcely known reality by providing data in order to understand the origin and development of pedestrian actions. This thesis intends to lay the foundations of this field in Spain, accurately defining the state of the art from a geographical point of view and preparing a full thematic map that may be used in the future. The overall aim is to study and understand the pedestrian elements of a limited number of Spanish medium-size cities, establishing the following specific goals: - To identify and describe the main elements comprising cities' pedestrian networks. - To study of special predominant typologies, their features and origins, with the possibility to, on the one hand, make a difference between the typologies developed in well-established cities, such as the actions in historic quarters, and, on the other hand, those implemented in new cities through generally residential architectural formulae with adjoining pedestrian areas. - To analyse the said elements in order to check whether they have resulted in pedestrian-use networks, whether they have been established by organising the city, such as the linear axes in coastal and riverside cities, or whether they have had an impact on the character of the areas where these elements have been implemented, focusing on pedestrian historic quarters. - Check whether there are actions supplementary to the urban development and urban improvement processes, as well as the approval of financial support and subventions to deal with these actions. - Finally, to describe and assess the processes and procedures by which the pedestrianisation of certain urban areas is carried out, the origins, the instruments and the date of their implementation, providing a pedestrian timeline. The methodology starts by defining 22 Spanish cities, province capitals with a population ranging from 100,000 to 500,000 inhabitants, according to the data recorded by the Spanish Statistics Institute (INE) in 2009. The distribution of coastal, riverside and interior cities, as well as of patrimonial cities and cities in islands, etc. is well balanced. The analysis of the pedestrian elements of these cities is made with the great resolution of the public and private map databases that can be accessed on the Internet, especially using the "street-view" version of tools such as Google Earth and Google Maps, software applications that allow to go for a virtual walk in each city, providing highly precise details about the pedestrian actions. The following cities have been chosen: ‐ 11 coastal cities: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián and Tarragona. ‐ 11 interior cities: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid and Vitoria. Finally, as they have the highest percentages regarding the pedestrian areas found in the historic quarters, 3 cities representing a deep pedestrian development have been chosen: Burgos, San Sebastián and Pamplona. Other significant methodological aspects are the many documents found from online sources, especially when preparing the last chapter: “Processes for the pedestrianisation of Spanish cities”, which focuses on the 3 cities chosen. Local newspaper and periodical libraries, official gazettes, the minutes of plenary sessions of councils and the zoning regulation documents (General Zoning Plans, Special Zoning Plans, Municipal Plans and Projects, Mobility Plans, etc.) have been consulted, obtaining accurate information regarding the timeline and the extension of the works carried out. The methodology is supplemented by interviews with key players in the pedestrianisation process, such as the technical staff in councils and the officers drafting and designing the projects, as well as with the direct collaboration by the officers of the councils of the 3 cities chosen, who provided all the information requested. The thesis introduces the pedestrian elements by studying pedestrian areas and existing pedestrianisation processes through the analysis of the literature consulted, providing valuable information for the definition of pedestrian models and showing a brief history and background of the pedestrianisation process. Remarkable papers published by some European experts in the field, such as Carmen Hass-Klau, Rolf Monheim and Collin Buchanan, are covered in the thesis. In Spain, the pedestrianisation actions were late in time in comparison to the rest of Europe, with at least 40 years of delay. The Spanish literature references in this field are limited. The most significant papers are those published by Alfonso Sanz and by Professor Julio Pozueta, with a special mention of one of his last works "La ciudad paseable" (The Walkable City), which describes the pedestrian elements found in the cities and is used a model and an example for this research. Based on the elements above, pedestrian elements are defined as those construction-free public areas that, due to their features and design, ensure the comfortable, convenient use of the spaces, characterised by pedestrian traffic and specifically reserved for this purpose. The thesis detects and specifies the following pedestrian elements: pedestrian streets and squares, pavements (sidewalks) and boulevards with a width exceeding 8 metres, pedestrian promenades, crossing elements (traditional and mechanical), pedestrian spaces linked to new residential areas, colonnades and pedestrian passages or narrow streets with a minimum width of 4 metres, exhibition sites, free spaces and green areas and parks. For each of the 22 cities chosen, a thorough inventory of the elements mentioned above has been made by using worksheets, providing a significant number of individual projects developed in each city. This information is graphically collected and displayed on 2 photomaps, resulting in tools essential for this research. Photomap 1 is made based on the city displayed by Google Earth, making a difference between pedestrian areas and green areas. On Photomap 2, using the tool mentioned above, a difference can be made between persistent and predominant typologies, such as the big pedestrian axes, the local pedestrian networks and singular pedestrian elements. Finally, the 2 photomaps are used in order to establish the so-called "pedestrian footprint", which is highlighted by its attractiveness and appeal, concepts for which the pedestrian field is very useful. With the pedestrian footprint, quick information can be obtained, since the map shows two colours: orange for pedestrian elements (made up of pedestrian areas and green areas) and black for the other non-pedestrian elements. A significant part of these graphic, descriptive documents about each city's pedestrian elements can be found in the thesis appendix. The "Pedestrian Footprint" is regarded in the research as the basic map, obtaining a quick, clear and visual perception of each city's pedestrian space. This footprint provides morphological information regarding the space distribution, the organisation, the balance, the modulation, the cohesion, the pedestrian concentration, etc. in each of the cities chosen. The pedestrian footprint helps solve many of the questions established as the thesis goals, proving that, in general, the pedestrian elements are not organised in the urban plot, as there is no structure modulating the city as a properly linked set of elements. Small networks linked to each other and heterogeneously scattered all over the city are found. It has been verified that the pedestrian elements with the highest concentration and presence in the cities analysed are the pedestrian axes, the historic quarters and the pedestrian elements found in the new residential areas. Besides these 3 elements mentioned, the research analyses in depth other types that are remarkable due to their persistence and repetition in the "Pedestrian Footprint" of each of the 22 cities, such as the pedestrian squares, the colonnades and the singular pedestrian elements: traditional spaces (exhibition sites, passages, historic bridges), new pedestrian elements (pedestrian footbridges, mechanical crossing elements), pedestrian areas around cultural buildings and other cases such as those consisting of recovering and transforming building and urban constructions, intended for a wide range of purposes and of different types, into new pedestrian areas. This work puts light on the definition, location, timeline, proportion, presence and origin, providing results for each of these concepts. At the same time, quantitative information is obtained by measuring the footprint, getting data and percentages on the size of the city, the pedestrian areas and the green areas, the historic quarters and the pedestrian zones, the linear metres of such historic quarters and pedestrian streets. The footprint also provides ratios and rates that are considered as essential in order to better understand the pedestrian elements of each city. A classification of cities is established for each of the areas described, highlighting the cities of Pamplona, San Sebastián and Burgos, as they provide the most positive pedestrian figures and lead most of the classification tables or rankings. According to the criteria considered, the city with the worst values is Alicante, followed by Almería, Palma de Mallorca and Las Palmas de Gran Canaria. In the final chapter in the thesis, the cities of Burgos, San Sebastián and Pamplona are chosen as representative study cases. The aim is to gain more accurate knowledge regarding the pedestrianisation origin, timeline and processes. Each city comprises a chronological sequence made of stages, each of which is thoroughly developed and usually announced as zoning plans or urban development projects, accompanied by the plans of the pedestrian actions. At the end of each stage, data with the figures of the pedestrianisation projects are provided, including a numerical chart with locations, pedestrian area, redeveloped urban areas, pedestrian length and pedestrianisation degree in the historic quarter, as well as the data cumulated throughout each stage. In the crossed conclusions on the three cities, the trend of gradually pedestrianising the historic quarters (even reaching the 100% of the pedestrian streets as in San Sebastián) is verified. However, it is difficult to confirm whether the purpose is to reach an overall pedestrianisation of the historic quarters, since there are many variables that affect and influence each city's pedestrianisation process. In addition, the spread of the pedestrian culture from the internal areas to the external areas, beyond the historic quarters to the nearby expansion areas, is compared. Regarding the origin of pedestrianisations, the thesis comes to the conclusion that there is no initial or theoretical conception from which each city's pedestrian plot is developed. The pedestrian processes implemented are varied and diverse but no fact can be specified as the main cause. Based on the moment and circumstances, the pedestrianisation processes are due to different initiatives promoted by shopkeepers, by the local administrations or by the zoning officers, with their expert contributions to the plans. These three players promote and drive individual pedestrianisation projects that overlap in the course of time. Finally, new lines of research are put forwards, as they can be taken as an additional study and as a supplement to this research, dealing with aspects as significant as the economic, social and mobility factors, closely linked to the pedestrianisation processes, as proven in the literature consulted.

An integrated assessment of two decades of air pollution policy making in Spain: Impacts, costs and improvements

This paper analyses the effects of policy making for air pollution abatement in Spain between 2000 and 2020 under an integrated assessment approach with the AERIS model for number of pollutants (NOx/NO2, PM10/PM2.5, O3, SO2, NH3 and VOC). The analysis of the effects of air pollution focused on different aspects: compliance with the European limit values of Directive 2008/50/EC for NO2 and PM10 for the Spanish air quality management areas; the evaluation of impacts caused by the deposition of atmospheric sulphur and nitrogen on ecosystems; the exceedance of critical levels of NO2 and SO2 in forest areas; the analysis of O3-induced crop damage for grapes, maize, potato, rice, tobacco, tomato, watermelon and wheat; health impacts caused by human exposure to O3 and PM2.5; and costs on society due to crop losses (O3), disability-related absence of work staff and damage to buildings and public property due to soot-related soiling (PM2.5). In general, air quality policy making has delivered improvements in air quality levels throughout Spain and has mitigated the severity of the impacts on ecosystems, health and vegetation in 2020 as target year. The findings of this work constitute an appropriate diagnosis for identifying improvement potentials for further mitigation for policy makers and stakeholders in Spain.

Relationship between piezometric level and ground deformations measured by means of DInSAR in the Vega Media of the Segura River (Spain)

Differential SAR Interferometry (DInSAR) is a remote sensing method with the well demonstrated ability to monitor geological hazards like earthquakes, landslides and subsidence. Among all these hazards, subsidence involves the settlement of the ground surface affecting wide areas. Frequently, subsidence is induced by overexploitation of aquifers and constitutes a common problem that affects developed societies. The excessive pumping of underground water decreases the piezometric level in the subsoil and, as a consequence, increases the effective stresses with depth causing a consolidation of the soil column. This consolidation originates a settlement of ground surface that must be withstood by civil structures built on these areas. In this paper we make use of an advanced DInSAR approach - the Coherent Pixels Technique (CPT) [1] - to monitor subsidence induced by aquifer overexploitation in the Vega Media of the Segura River (SE Spain) from 1993 to the present. 28 ERS-1/2 scenes covering a time interval of about 10 years were used to study this phenomenon. The deformation map retrieved with CPT technique shows settlements of up to 80 mm at some points of the studied zone. These values agree with data obtained by means of borehole extensometers, but not with the distribution of damaged buildings, well points and basements, because the occurrence of damages also depends on the structural quality of the buildings and their foundations. The most interesting relationship observed is the one existing between piezometric changes, settlement evolution and local geology. Three main patterns of ground surface and piezometric level behaviour have been distinguished for the study zone during this period: 1) areas where deformation occurs while ground conditions remain altered (recent deformable sediments), 2) areas with no deformation (old and non-deformable materials), and 3) areas where ground deformation mimics piezometric level changes (expansive soils). The temporal relationship between deformation patterns and soil characteristics has been analysed in this work, showing a delay between them. Moreover, this technique has allowed the measurement of ground subsidence for a period (1993-1995) where no instrument information was available.

Forensic analysis of buildings affected by mining subsidence based on Differential Interferometry (Part III)

This work presents a forensic analysis of buildings affected by mining subsidence, which is based on deformation data obtained by Differential Interferometry (DInSAR). The proposed test site is La Union village (Murcia, SE Spain) where subsidence was triggered in an industrial area due to the collapse of abandoned underground mining labours occurred in 1998. In the first part of this work the study area was introduced, describing the spatial and temporal evolution of ground subsidence, through the elaboration of a cracks map on the buildings located within the affected area. In the second part, the evolution of the most significant cracks found in the most damaged buildings was monitored using biaxial extensometric units and inclinometers. This article describes the work performed in the third part, where DInSAR processing of satellite radar data, available between 1998 and 2008, has permitted to determine the spatial and temporal evolution of the deformation of all the buildings of the study area in a period when no continuous in situ instrumental data is available. Additionally, the comparison of these results with the forensic data gathered in the 2005–2008 period, reveal that there is a coincidence between damaged buildings, buildings where extensometers register significant movements of cracks, and buildings deformation estimated from radar data. As a result, it has been demonstrated that the integration of DInSAR data into forensic analysis methodologies contributes to improve significantly the assessment of the damages of buildings affected by mining subsidence.

Mathematics Game e-Library for Elementary School, study case: Mexico

One of the most relevant subjects for the intellectual formation of elementary school students is Mathematics where its importance goes back to ancient civilizations and which its importance is underestimated nowadays. This phenomenon occurs in Mexico, where 63.1% of the total population of elementary school students between the third and sixth grade have insufficient/elemental level of mathematics knowledge. This has resulted in the need to use a new mechanism to complement student’s classroom learning. With the rapid growth of wireless and mobile technologies, the mobile learning has been gradually considered as a novel and effective form of learning due to it inherits all the advantages of e-learning as well as breaks the limitations of learning time and space occurring in the traditional classroom teaching. This project proposes the use of a Mathematics Game e-Library integrated by a set of games for mobile devices and a distribution/management tool. The games are developed for running on mobile devices and for cover the six competencies related with the mathematics learning approach established in Mexico. The distribution/management tool allows students to reach contents according to their needs; this is achieved through a core engine that infers, from an initial profile, the games that cover the user’s knowledge gaps.

The episcopal complex of Eio-El Tolmo de Minateda (Hellín, Albacete, Spain). Architecture and spatial organization. 7th to 8th centuries AD

The episcopal complex of Eio, located in El Tolmo de Minateda, was built between the end of the 6th century and the beginning of the 7th century, possibly as a political decision taken by the ecclesiastical authority in the capital of the Visigothic kingdom (Toletum). With the comprehensive study of the whole complex presented below (construction cycles, furniture, decoration and location of spaces), we can interpret the function of each space in the basilica and the domus episcopi, the liturgical and general movement routes, the existence of some hierarchical environments, and specify the chronological development of the buildings. After the Arab-Berber conquest of Hispania in the early 8th century, the whole complex will experience a series of transformations that will convert the religious and monumental public area into a private, residential and industrial Islamic quarter.

A methodology for evacuation route planning inside buildings using geospatial technology

Evacuation route planning is a fundamental task for building engineering projects. Safety regulations are established so that all occupants are driven on time out of a building to a secure place when faced with an emergency situation. As an example, Spanish building code requires the planning of evacuation routes on large and, usually, public buildings. Engineers often plan these routes on single building projects, repeatedly assigning clusters of rooms to each emergency exit in a trial-and-error process. But problems may arise for a building complex where distribution and use changes make visual analysis cumbersome and sometimes unfeasible. This problem could be solved by using well-known spatial analysis techniques, implemented as a specialized software able to partially emulate engineer reasoning. In this paper we propose and test an easily reproducible methodology that makes use of free and open source software components for solving a case study. We ran a complete test on a building floor at the University of Alicante (Spain). This institution offers a web service (WFS) that allows retrieval of 2D geometries from any building within its campus. We demonstrate how geospatial technologies and computational geometry algorithms can be used for automating the creation and optimization of evacuation routes. In our case study, the engineers’ task is to verify that the load capacity of each emergency exit does not exceed the standards specified by Spain’s current regulations. Using Dijkstra’s algorithm, we obtain the shortest paths from every room to the most appropriate emergency exit. Once these paths are calculated, engineers can run simulations and validate, based on path statistics, different cluster configurations. Techniques and tools applied in this research would be helpful in the design and risk management phases of any complex building project.

JavaVis: An Integrated Computer Vision Library for Teaching Computer Vision

In this article, we present a new framework oriented to teach Computer Vision related subjects called JavaVis. It is a computer vision library divided in three main areas: 2D package is featured for classical computer vision processing; 3D package, which includes a complete 3D geometric toolset, is used for 3D vision computing; Desktop package comprises a tool for graphic designing and testing of new algorithms. JavaVis is designed to be easy to use, both for launching and testing existing algorithms and for developing new ones.