Interação social entre agentes em ambientes de recursos limitados

Trabalho final de Mestrado para obtenção do grau de Mestre em Engenharia de Redes de Comunicação e Multimédia

Unidade de interação e controlo para uma cadeira de rodas elétrica automática

Num mundo onde cerca de 1% da população necessita de utilizar uma cadeira de rodas para a sua deslocação, a acessibilidade a este tipo de veículo no exterior ainda encontra-se num estado bastante precário. Falta de rampas nos passeios, buracos, caminhos em declive e determinados obstáculos como carros estacionados por cima do passeio, são alguns de muitos exemplos dos desafios que uma pessoa em cadeira de rodas enfrenta quando tenta deslocar-se no exterior, o que faz com que a autonomia e a segurança na condução de uma cadeira de rodas seja bastante reduzida, sendo por muitas vezes necessário recorrer de forma constante à ajuda de terceiros, que, por consequência, reduz a sua, já limitada, liberdade de locomoção. É com base nestes problemas que o projeto RevoChair surgiu. Este projeto consiste no desenvolvimento de um sistema para cadeira de rodas elétrica que permita ao utilizador movimentar-se no exterior automaticamente, sempre que possível, sem ter de se preocupar com os obstáculos a sua volta. Esta tese incide-se concretamente sobre três dos problemas do desenvolvimento deste projeto, a definição das componentes necessárias para a implementação do sistema, a forma como o utilizador interage com o sistema e a forma como os componentes comunicam entre si, tendo como foco a unidade de interação e a unidade de controlo responsável por gerir a comunicação entre os diversos componentes do sistema.

Design and Implementation of a Biologically Inspired Flying Robot - An EPS@ISEP 2014 Spring Project

The goal of this EPS@ISEP project proposed in the Spring of 2014 was to develop a flapping wing flying robot. The project was embraced by a multinational team composed of four students from different countries and fields of study. The team designed and implemented a robot inspired by a biplane design, constructed from lightweight materials and battery powered. The prototype, called MyBird, was built with a 250 € budget, reuse existing materials as well as low cost solutions. Although the team's initial idea was to build a light radio controlled robot, time limitations along with setbacks involving the required electrical components led to a light but not radio controlled prototype. The team, from the experience gathered, made a number of future improvement suggestions, namely, the addition of radio control and a camera and the adoption of articulated monoplane design instead of the current biplane design for the wings.

Design and Implementation of a Biologically Inspired Swimming Robot - An EPS@ISEP 2014 Spring Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Control and Dynamics of Fractional Order Systems

Fractional Calculus (FC) goes back to the beginning of the theory of differential calculus. Nevertheless, the application of FC just emerged in the last two decades due to the progress in the area of nonlinear dynamics. This article discusses several applications of fractional calculus in science and engineering, namely: the control of heat systems, the tuning of PID controllers based on fractional calculus concepts and the dynamics in hexapod locomotion.

Performance Issues in Biped Walking Robots

This paper presents the dynamic analysis of robotic biped systems. The main goal is to gain insight into the phenomena of walking and to evaluate its performance. In this study, we propose three methods to quantitatively measure the dynamic efficiency of walking: energy analysis, perturbation analysis and lowpass frequency analysis. In order to accomplish this goal, the prescribed motion of the biped is completely characterised in terms of a set of locomotion variables, namely: step lenght, hip height, hip ripple, hip offset, foot clearance and link lenghts. based on these variables and their influence, the performance measures aer discussed and the results compared with those observed in nature.

Simulação de Robôs Quadrúpedes Utilizando o SimMechanics

Desde sempre o Homem procurou automatizar tarefas repetitivas. Tanto na indústria como no sector doméstico ou de comércio estão constantemente a surgir novos equipamentos procurando aumentar o nível de automação de diversas tarefas. A necessidade de empresas criadoras de produtos inovadores se manterem concorrenciais obrigou à adopção de métodos de projecto e planeamento mais estruturados e eficientes que eliminem os desperdícios tanto de material como de tempo. Diversas construções em termos orçamentais e o aumento da procura de produtos de alta qualidade a baixo custo deu origem a um novo tipo de programas, os programas de simulação virtual. Tal como na indústria, também na investigação nas Instituições de Ensino Superior se procuram adoptar os métodos de trabalho mais eficientes possíveis. Uma parte dos programas de simulação robótica utilizados hoje em dia na investigação no Instituto Superior de Engenharia do Porto estão concebidos em linguagem C. Embora esta linguagem seja extremamente capaz, existem métodos mais adequados de simulação que aceleram o processo de modelação permitindo a visualização do movimento e simulação de diversas situações potencialmente criticas sem existir a necessidade de construção de um protótipo funcional do robô. Durante o último ano, este projecto permitiu construir um modelo de um robô quadrúpede num programa de simulação virtual chamado Simmechanics™. Embora haja já algum trabalho desenvolvido nesta área, constatou-se que a informação existente possuía algumas lacunas. Com o trabalho desenvolvido preparou-se esta dissertação que pretende clarificar algumas questões que surgem na modelação de um robô. Neste documento explica-se como modelar um robô de corpo flexível, modelar as pernas e as respectivas juntas da anca e do joelho assim como também se apresenta a modelação de um contacto com o solo recorrendo a um modelo descrito na literatura. Este documento foi escrito a pensar no leitor, procurando-se explicar de forma simples mas concisa os diversos passos necessários para construir um modelo virtual de um robô. O autor espera, desta forma, ajudar futuros colegas que pretendam trabalhar com o Simmechanics™ a mais facilmente se integrarem com o programa aumentando desta forma o declive da curva de aprendizagem e permitindo um maior aproveitamento desta ferramenta.

Symmetry and order parameter dynamics of the human odometer

Bipedal gaits have been classified on the basis of the group symmetry of the minimal network of identical differential equations (alias cells) required to model them. Primary bipedal gaits (e.g., walk, run) are characterized by dihedral symmetry, whereas secondary bipedal gaits (e.g., gallop-walk, gallop- run) are characterized by a lower, cyclic symmetry. This fact has been used in tests of human odometry (e.g., Turvey et al. in P Roy Soc Lond B Biol 276:4309–4314, 2009, J Exp Psychol Hum Percept Perform 38:1014–1025, 2012). Results suggest that when distance is measured and reported by gaits from the same symmetry class, primary and secondary gaits are comparable. Switching symmetry classes at report compresses (primary to secondary) or inflates (secondary to primary) measured distance, with the compression and inflation equal in magnitude. The present research (a) extends these findings from overground locomotion to treadmill locomotion and (b) assesses a dynamics of sequentially coupled measure and report phases, with relative velocity as an order parameter, or equilibrium state, and difference in symmetry class as an imperfection parameter, or detuning, of those dynamics. The results suggest that the symmetries and dynamics of distance measurement by the human odometer are the same whether the odometer is in motion relative to a stationary ground or stationary relative to a moving ground.

Behavioral changes in Rattus norvegicus experimentally infected by Toxocara canis larvae

Toxocara canis is a common canine nematode parasite and one of its possible transmission mechanisms is the predation of infected rodents by canids. Fifty Rattus norvegicus were used to study behavioral alterations in rodents infected by T. canis larvae. The rats were divided into three groups: G1, 20 rats infected with 300 T. canis eggs; G2, 20 rats infected with 2,000 T. canis eggs; and G3, 10 non-infected rats. Thirty and 60 days post-infection, rats from all the groups were submitted to an open-field apparatus for five min and subsequently, to an elevated plus-maze apparatus, again for five min. The data obtained indicated improvement in mobility (total locomotion time and rearing frequency) and exploratory behavior in infected rats, principally in G2, which provides some support for the hypothesis that behavioral alterations in rodents infected by Toxocara canis larvae enhance the transmission rate of this ascarid to dogs.

Algorithm for the Parkinson’s disease behavioural models characterization using a biosensor

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

A flexible navigation system for autonomous robots operating in heterogeneous environments

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Genetic parameters and mapping quantitative trait loci associated with tibia traits in broilers.

Abstract: Selection among broilers for performance traits is resulting in locomotion problems and bone disorders, once skeletal structure is not strong enough to support body weight in broilers with high growth rates. In this study, genetic parameters were estimated for body weight at 42 days of age (BW42), and tibia traits (length, width, and weight) in a population of broiler chickens. Quantitative trait loci (QTL) were identified for tibia traits to expand our knowledge of the genetic architecture of the broiler population. Genetic correlations ranged from 0.56 +/- 0.18 (between tibia length and BW42) to 0.89 +/- 0.06 (between tibia width and weight), suggesting that these traits are either controlled by pleiotropic genes or by genes that are in linkage disequilibrium. For QTL mapping, the genome was scanned with 127 microsatellites, representing a coverage of 2630 cM. Eight QTL were mapped on Gallus gallus chromosomes (GGA): GGA1, GGA4, GGA6, GGA13, and GGA24. The QTL regions for tibia length and weight were mapped on GGA1, between LEI0079 and MCW145 markers. The gene DACH1 is located in this region; this gene acts to form the apical ectodermal ridge, responsible for limb development. Body weight at 42 days of age was included in the model as a covariate for selection effect of bone traits. Two QTL were found for tibia weight on GGA2 and GGA4, and one for tibia width on GGA3. Information originating from these QTL will assist in the search for candidate genes for these bone traits in future studies.

Fragilidade e pré-fragilidade em pessoas idosas residentes na comunidade

RESUMO: Objectivo: Este estudo tem como principal objectivo determinar perfis de fragilidade em pessoas idosas, residentes ma comunidade. Metodologia: Trata-se de um estudo de natureza não experimental, quantitativo, exploratório e descritivo, com uma amostra de conveniência, constituída por pessoas idosas (n=47), residentes na comunidade. As variáveis em análise foram o fenótipo de fragilidade, onde a força de preensão foi avaliada através de um dinamómetro portátil, a percepção de exaustão através da CES-D, a velocidade de marcha foi avaliada pelo Timed Up and Go Test, a actividade física através de uma escala simplificada, com base nos estudos de Grimby, e a perda de peso não intencional através de uma questão sobre perda de peso no último ano. As restantes variáveis foram avaliadas por questionário, à excepção da capacidade funcional, avaliada por uma escala com actividades básicas e instrumentais da vida diária assim como locomoção, e da força de membros inferiores, avaliada pelo teste de sentar e levantar da cadeira durante 30 segundos. Resultados: Verificou-se que a maioria da amostra era pré-frágil, com uma frequência próxima de fragilidade e uma quase inexistência de não fragilidade. Contribui para isto, essencialmente, a velocidade de marcha e perda de peso não intencional. Apesar de se encontrar uma grande presença de comorbilidade e independência com limitação nos indivíduos deste estudo, não se verifica uma relação de significância entre estas variáveis. Verificam-se relações significativas com a Hipertensão arterial e a percepção do estado de saúde. Conclusão: Não foi possível definir um perfil de fragilidade de forma consistente, devido à grande variabilidade de resultados encontrados e à não existência de correlações significativas, no que diz respeito à síndrome de fragilidade. -----------ABSTRACT: Objective: This study aims to determine profiles of fragility in elderly people, living in the community Methodology: This is a study of a non experimental, quantitative, exploratory and descriptive, with a convenience sample, consisting of elderly (n = 47), living in the community. The variables analyzed were the frailty phenotype where grip strength was measured using a handheld dynamometer, the perception of exhaustion through the CES-D, gait speed was assessed by the Timed Up and Go Test, physical activity through a simplified scale based on studies of Grimby and unintentional loss of weight through a question about weight loss in the last year.The remaining variables were assessed by questionnaire, with the exception of functional capacity assessed by a scale with basic and instrumental activities of daily living as well as locomotion, and lower limb strength, evaluated by sitting and rising from a chair for 30-second test. Results: It was found that most of the sample was pre-fragile with a frequency close to the fragility and almost no non-brittleness. Contribute to this, essentially, gait speed and unintentional weight loss. Despite being a large presence of comorbidity and independence in individuals with limitation of this study, no there is a significant relationship between this variables. There are significant relations with hypertension and the perception of health status. Conclusion: It was not possible to define a profile of fragility consistently, due to the great variability of results and the absence of significant correlations, with respect to the frailty syndrome.

On the function of the floccular complex of the vertebrate cerebellum: implications in paleoneuroanatomy

The cerebellum floccular complex lobes (FCLs) are housed in the FCL fossa of the periotic complex. There is experimental evidence indicating that the FCLs integrate visual and vestibular information, responsible for the vestibulo-ocular reflex, vestibulo-collic reflex, smooth pursuit and gaze holding. Thus, the behavior of extinct animals has been correlated with FCLs dimension in multiple paleoneuroanatomy studies. Here I analyzed braincase endocasts of a representative sample of Mammalia (48 species) and Aves (59 species) rendered using tomography and image segmentation and tested statistical correlations between the floccular complex volume, ecological and behavioral traits to assess various previously formulated paleobiological speculations. My results demonstrate: 1) there is no significant correlation between relative FCL volume and body mass; 2) there is no significant correlation between relative FCL and optic lobes size in birds; 3) average relative FCL size is larger in diurnal than in nocturnal birds but there is no statistically significant difference in mammals; 4) feeding strategies are related with different FCL size patterns in birds, but not in mammals; 5) locomotion type is not related with relative FCL size in mammals; 6) agility is not significantly correlated with FCL size in mammals. I conclude that, despite the apparent relation between FCL size and ecology in birds, the cerebellum of tetrapods is a highly plastic structure and may be adapted to control different functions across different taxonomic levels. For example, the european mole (Talpa europaea) which is fossorial and practically blind, has a FCL fossae relative size larger than those of bats, which are highly maneuverable. Therefore, variation in FCL size may be better explained by a combination of multiple factors with relation to anatomical and phylogenetic evolutionary constraints.