带有A1N插入层的GaN薄膜的结构及应变研究

利用金属有机化学汽相沉积(MOCVD)法在硅衬底上生长具有AIN插入层的GaN外延膜，采用高分辨X射线衍射(HRXRD)和卢瑟福背散射/沟道(RBS/Channeling)技术研究分析其结构和应变性质。从RBS＜0001＞沟道谱可知，该外延膜具有良好的结晶品质，χ_(min)＝2.5％。利用不同方位角上XRD摇摆曲线测量，可得出GaN(0001)面与Si(111)面之间的夹角β＝1.379°。通过对GaN(0002)和GaN(10(1-bar)5)衍射面的θ-2θ扫描，可以得出GaN外延膜在垂直方向和水平方向的平均弹性应变分别为-0.10%±0.02％和0.69％±0.09％。通过对{10(1-bar)0}面内非对称<1(2-bar)13>轴RBS角扫描可得出由弹性应变引起的四方畸变e_T在近表面处为0.35％±0.02％。外延膜弹性性质表明GaN膜在水平方向具有张应力(e~〃＞0)、在垂直方向具有压应力(e~⊥＜0)，印证了XRD的结果。四方畸变是深度敏感的，通过对不同深度的四方畸变计算可知，A1N插入层下面的GaN外延膜弹性应变释放速度比A1N层上面的GaN层弹性应变释放快，说明A1N层的插入缓解了应变释放速度。

A viscous froth model for dry foams in the Surface Evolver

Cox, S.J. (2005) A Viscous Froth Model for Dry Foams in the Surface Evolver. Coll. Surf. A 263:81-89. Sponsorship: Partial support from both the Ulysses France?Ireland Exchange Scheme and the European Space Agency, Contract 14308/00/NL/SH (AO-99-031) CCN 002 MAP Project AO-99-075.

Rozbudowane niemieckie frazy nominalne i ich polskie odpowiedniki. Studium konfrontatywne

Wydział Neofilologii: Instytut Lingwistyki Stosowanej

Integrated genetic analysis systems

The overall objective of this thesis is to integrate a number of micro/nanotechnologies into integrated cartridge type systems to implement such biochemical protocols. Instrumentation and systems were developed to interface such cartridge systems: (i) implementing microfluidic handling, (ii) executing thermal control during biochemical protocols and (iii) detection of biomolecules associated with inherited or infectious disease. This system implements biochemical protocols for DNA extraction, amplification and detection. A digital microfluidic chip (ElectroWetting on Dielectric) manipulated droplets of sample and reagent implementing sample preparation protocols. The cartridge system also integrated a planar magnetic microcoil device to generate local magnetic field gradients, manipulating magnetic beads. For hybridisation detection a fluorescence microarray, screening for mutations associated with CFTR gene is printed on a waveguide surface and integrated within the cartridge. A second cartridge system was developed to implement amplification and detection screening for DNA associated with disease-causing pathogens e.g. Escherichia coli. This system incorporates (i) elastomeric pinch valves isolating liquids during biochemical protocols and (ii) a silver nanoparticle microarray for fluorescent signal enhancement, using localized surface plasmon resonance. The microfluidic structures facilitated the sample and reagent to be loaded and moved between chambers with external heaters implementing thermal steps for nucleic acid amplification and detection. In a technique allowing probe DNA to be immobilised within a microfluidic system using (3D) hydrogel structures a prepolymer solution containing probe DNA was formulated and introduced into the microfluidic channel. Photo-polymerisation was undertaken forming 3D hydrogel structures attached to the microfluidic channel surface. The prepolymer material, poly-ethyleneglycol (PEG), was used to form hydrogel structures containing probe DNA. This hydrogel formulation process was fast compared to conventional biomolecule immobilization techniques and was also biocompatible with the immobilised biomolecules, as verified by on-chip hybridisation assays. This process allowed control over hydrogel height growth at the micron scale.

SELECTED TWENTIETH-CENTURY BRITISH & AMERICAN ENGLISH SONG REPERTOIRE WRITTEN FOR SOPRANO

English language song (both British and American) is influenced by a variety of cultures, races, and musical forms and has produced a broad range of song repertoire. Like songs in all countries and throughout history, these songs can be classified into three categories: imitative songs, experimental songs, and songs of individuality. Music experimentation, necessary and welcome as it is, can hardly command broad international attention. Thus, the songs of this dissertation performance project are chosen from the first and third categories: imitative songs and individual songs in the composer's own unique style. This project concentrates its exploration on twentieth-century solo songs written in English. Although twentieth-century British & American composers also produced solos and chamber music in other languages, this dissertation focuses upon their English repertoire. This performance project consists of three programs: one British repertoire and two American. The first program titled An Evening of British Song examines twentieth-century British song written by Roger Quilter, Peter Warlock, William Walton, Benjamin Britten, Thomas F. Dunhill, Ivor Gurney, and Frank Bridge. It was presented on December 12, 2001, in Homer Ulrich Recital Hall with the collaborative pianist Meriel Owen. The second program titled An Evening of American Song I comprises music written by Dominick Argento, Samuel Barber, Ned Rorem, Leonard Bernstein, and Lee Hoiby. It was presented on October 23, 2002, in Joseph & Alma Gildenhorn Recital Hall with the collaborative pianist R. Timothy McReynolds. The third program titled An Evening of American Song II written by John Duke, John Corigliano, Charles Ives, Richard Hundley, Lori Laitman, Frederick Loewe, George Gershwin, and Jerome Kern was presented on December 18, 2003, again in Joseph & Alma Gildenhorn Recital Hall with the collaborative pianist R. Timothy McReynolds and the flutist Jessica Dunnavant. Each of these three dissertation recitals occurred at the University of Maryland in College Park and was recorded. These CD recordings are held by the Michelle Smith Performing Arts Library at the University of Maryland.

Three crocodilian genomes reveal ancestral patterns of evolution among archosaurs.

To provide context for the diversification of archosaurs--the group that includes crocodilians, dinosaurs, and birds--we generated draft genomes of three crocodilians: Alligator mississippiensis (the American alligator), Crocodylus porosus (the saltwater crocodile), and Gavialis gangeticus (the Indian gharial). We observed an exceptionally slow rate of genome evolution within crocodilians at all levels, including nucleotide substitutions, indels, transposable element content and movement, gene family evolution, and chromosomal synteny. When placed within the context of related taxa including birds and turtles, this suggests that the common ancestor of all of these taxa also exhibited slow genome evolution and that the comparatively rapid evolution is derived in birds. The data also provided the opportunity to analyze heterozygosity in crocodilians, which indicates a likely reduction in population size for all three taxa through the Pleistocene. Finally, these data combined with newly published bird genomes allowed us to reconstruct the partial genome of the common ancestor of archosaurs, thereby providing a tool to investigate the genetic starting material of crocodilians, birds, and dinosaurs.

Colloidal microgel in removal of water from biodiesel

A series of poly(N-isopropylacrylamide) [pNIPAM]-based homo-polymer and co-polymer microgel particles were prepared by surfactant-free emulsion polymerisation. The co-monomers were acrylic acid. 4-vinylpyridine. butyl acrylate, 4-vinylbiphenyl and vinyl laurate. Co-monomers were added at a concentration of 10% (w/w) relative to the base monomer pNIPAM for the preparation of each co-polymer microgel. The co-monomers chosen vary by their organic chain length, polarity and pH sensitivity, as these should influence how the particles behave in aqueous and non-aqueous solvents. The effect of adding different types of co-monomer into the microgel structure was investigated with respect to their dispersibility in different solvents. These microgel particles have shown useful application in the removal of water from biodiesel prepared from rape seed. Karl Fischer experiments showed that microgel particles can be used to reduce the water content in biodiesel to an acceptable level for incorporation into internal combustion engines. (C) 2008 Elsevier B.V. All rights reserved.

Microwave curing of thermosetting polymer materials in microelectronics applications

Thermosetting polymer materials are widely utilised in modern microelectronics packaging technology. These materials are used for a number of functions, such as for device bonding, for structural support applications and for physical protection of semiconductor dies. Typically, convection heating systems are used to raise the temperature of the materials to expedite the polymerisation process. The convection cure process has a number of drawbacks including process durations generally in excess of 1 hour and the requirement to heat the entire printed circuit board assembly, inducing thermomechanical stresses which effect device reliability. Microwave energy is able to raise the temperature of materials in a rapid, controlled manner. As the microwave energy penetrates into the polymer materials, the heating can be considered volumetric – i.e. the rate of heating is approximately constant throughout the material. This enables a maximal heating rate far greater than is available with convection oven systems which only raise the surface temperature of the polymer material and rely on thermal conductivity to transfer heat energy into the bulk. The high heating rate, combined with the ability to vary the operating power of the microwave system, enables the extremely rapid cure processes. Microwave curing of a commercially available encapsulation material has been studied experimentally and through use of numerical modelling techniques. The material assessed is Henkel EO-1080, a single component thermosetting epoxy. The producer has suggested three typical convection oven cure options for EO1080: 20 min at 150C or 90 min at 140C or 120 min at 110C. Rapid curing of materials of this type using advanced microwave systems, such as the FAMOBS system [1], is of great interest to microelectronics system manufacturers as it has the potential to reduce manufacturing costs, increase device reliability and enables new device designs. Experimental analysis has demonstrated that, in a realistic chip-on-board encapsulation scenario, the polymer material can be fully cured in approximately one minute. This corresponds to a reduction in cure time of approximately 95 percent relative to the convection oven process. Numerical assessment of the process [2] also suggests that cure times of approximately 70 seconds are feasible whilst indicating that the decrease in process duration comes at the expense of variation in degree of cure within the polymer.

Characterisation of products of tricalcium silicate hydration in the presence of heavy metals

The hydration of tricalcium silicate (C(3)S) in the presence of heavy metal is very important to cement-based solidification/stabilisation (s/s) of waste. In this work, tricalcium silicate pastes and aqueous suspensions doped with nitrate salts of Zn(2+), Pb(2+), Cu(2+) and Cr(3+) were examined at different ages by X-ray powder diffraction (XRD), thermal analysis (DTA/TG) and (29)Si solid-state magic angle spinning/nuclear magnetic resonance (MAS/NMR). It was found that heavy metal doping accelerated C(3)S hydration, even though Zn(2+) doping exhibited a severe retardation effect at an early period of time of C(3)S hydration. Heavy metals retarded the precipitation of portlandite due to the reduction of pH resulted from the hydrolysis of heavy metal ions during C(3)S hydration. The contents of portlandite in the control, Cr(3+)-doped, Cu(2+)-doped, Pb(2+)-doped and Zn(2+)-doped C(3)S pastes aged 28 days were 16.7, 5.5, 5.5, 5.5, and <0.7%, respectively. Heavy metals co-precipitated with calcium as double hydroxides such as (Ca(2)Cr(OH)(7).3H(2)O, Ca(2)(OH)(4)4Cu(OH)(2).2H(2)O and CaZn(2)(OH)(6).2H(2)O). These compounds were identified as crystalline phases in heavy metal doping C(3)S suspensions and amorphous phases in heavy metal doping C(3)S pastes. (29)Si NMR data confirmed that heavy metals promoted the polymerisation of C-S-H gel in 1-year-old of C(3)S pastes. The average numbers of Si in C-S-H gel for the Zn(2+)-doped, Cu(2+)-doped, Cr(3+)-doped, control, and Pb(2+)-doped C(3)S pastes were 5.86, 5.11, 3.66, 3.62, and 3.52. And the corresponding Ca/Si ratios were 1.36, 1.41, 1.56, 1.57 and 1.56, respectively. This study also revealed that the presence of heavy metal facilitated the formation of calcium carbonate during C(3)S hydration process in the presence of carbon dioxide.

Observatie van voorlichtingslessen seksuele diversiteit in het Voortgezet Onderwijs: een pilot onderzoek

Mooij, T., & Fettelaar, D. (2013). Observatie van voorlichtingslessen seksuele diversiteit in het Voortgezet Onderwijs: Een pilot onderzoek. Tijdschrift voor Orthopedagogiek, 52(6), 282-298.

A metal-organic gel used as a template for a porous organic polymer

A polymeric metal-organic gel is described, which acts as a template in the preparation of macroporous polymethylmethacrylate, and can be easily removed post polymerisation.

El uso de la musicoterapia para la mejora de la comunicación de niños con Trastorno del Espectro Autista en Aulas Abiertas Especializadas

Los beneficios que aporta la musicoterapia en alumnos con Trastorno del Espectro Autista, han sido demostrados profusamente por los distintos autores, si bien carecemos de literatura suficiente sobre su utilización en las Aulas Abiertas Especializadas en colegios ordinarios (Aulas TEA). En este sentido, el objetivo del trabajo, ha consistido en analizar qué mejoras aporta la musicoterapia al desarrollo de la comunicación en los alumnos con Trastorno del Espectro Autista dentro de las Aulas Abiertas de los CEIPs de Castilla-La Mancha y la Comunidad Autónoma de Madrid. Para ello, se ha realizado una amplia revisión documental de fuentes de referencia y se ha entrevistado a los docentes responsables de las Aulas Abiertas Especializadas que utilizan actividades de musicoterapia como recurso en el aula. Se concluye el artículo manifestando, en primer lugar, la escasa integración de la musicoterapia en las aulas TEA (menos del 20% de los centros). En aquellas aulas que sí se programa con actividades de musicoterapia, los beneficios que ésta aporta se ven reflejados en un incremento claro de la intención comunicativa en los alumnos. Además, a la hora de planificar las actividades se tiene muy en cuenta conocer las preferencias y la historia musical del niño. No obstante, existen factores que impiden el aprovechamiento total de las posibilidades terapéuticas de la musicoterapia debido, especialmente a: a) una escasa formación del profesorado y b) un espacio inadecuado para poner en práctica una sesión de musicoterapia.

Incorporation of chitosan in acrylic bone cement: Effect on antibiotic release, bacterial biofilm formation and mechanical properties

Bacterial infection remains a significant problem following total joint replacement. Efforts to prevent recurrent implant infection, including the use of antibiotic-loaded bone cement for implant fixation at the time of revision surgery, are not always successful. In this in vitro study, we investigated whether the addition of chitosan to gentamicin-loaded Palacos® R bone cement increased antibiotic release and prevented bacterial adherence and biofilm formation by Staphylococcus spp. clinical isolates. Furthermore, mechanical tests were performed as a function of time post-polymerisation in pseudo-physiological conditions. The addition of chitosan to gentamicin-loaded Palacos® R bone cement significantly decreased gentamicin release and did not increase the efficacy of the bone cement at preventing bacterial colonisation and biofilm formation. Moreover, the mechanical performance of cement containing chitosan was significantly reduced after 28 days of saline degradation with the compressive and bending strengths not in compliance with the minimum requirements as stipulated by the ISO standard for PMMA bone cement. Therefore, incorporating chitosan into gentamicin-loaded Palacos® R bone cement for use in revision surgery has no clinical antimicrobial benefit and the detrimental effect on mechanical properties could adversely affect the longevity of the prosthetic joint.

The Effect of Tacticity on the Conformational Properties of Poly(1-olefin sulfone)s

The effect of tacticity on the conformational properties of poly(olefin sulfone)s was studied. Tactic polymers, prepared from racemic thiirane monomers using chiral inititators were compared with atactic polymers prepared by free radical co-polymerisation of the 1-olefin with sulfur dioxide. Analysis of the XRD patterns showed that the tactic polymers formed more ordered structures in the bulk with longer layer spacings, consistent with a model in which their side chains meet at the tips in contrast with the atactic polymers whose side chains interdigitate. 13C MAS nmr experiments suggest that as tacticity increases so too does the proportion of C-S bonds in the gauche conformation, however the proportion of S-C bonds in the trans conformation falls, in contrast to a reported molecular mechanics study. Finally, DSC measurements on the polymers with longer side chains showed the presence of two endotherms on heating, illustrating definite liquid crystalline behaviour.