997 resultados para Indicadores de Projetos de Pesquisa e Desenvolvimento


Relevância:

100.00% 100.00%

Publicador:

Resumo:

An evaluation project was conducted on the technique of treatment for effluent oil which is the deriving process to improve cashews. During the evaluation the following techniques were developed: advanced processes of humid oxidation, oxidative processes, processes of biological treatment and processes of adsorption. The assays had been carried through in kinetic models, with an evaluation of the quality of the process by means of determining the chemical demand of oxygen (defined as a technique of control by means of comparative study between the available techniques). The results demonstrated that the natural biodegradation of the effluent ones is limited, as result using the present natural flora in the effluent one revealed impracticable for an application in the industrial systems, independent of the evaluation environment (with or without the oxygen presence). The job of specific microorganisms for the oily composite degradation developed the viability technique of this route, the acceptable levels of inclusion in effluent system of treatment of the improvement of the cashew being highly good with reasonable levels of removal of CDO. However, the use combined with other techniques of daily pay-treatment for these effluent ones revealed to still be more efficient for the context of the treatment of effluent and discarding in receiving bodies in acceptable standards for resolution CONAMA 357/2005. While the significant generation of solid residues the process of adsorption with agroindustrial residues (in special the chitosan) is a technical viable alternative, however, when applied only for the treatment of the effluent ones for discarding in bodies of water, the economic viability is harmed and minimized ambient profits. Though, it was proven that if used for ends of I reuse, the viability is equalized and justifies the investments. There was a study of the photochemistry process which have are applicable to the treatment of the effluent ones, having resulted more satisfactory than those gotten for the UV-Peroxide techniques. There was different result on the one waited for the use of catalyses used in the process of Photo. The catalyses contained the mixing oxide base of Cerium and Manganese, incorporated of Potassium promoters this had presented the best results in the decomposition of the involved pollutants. Having itself an agreed form the gotten photochemistry daily paytreatment resulted, then after disinfection with chlorine the characteristics next the portability to the water were guarantee. The job of the humid oxidation presented significant results in the removal of pollutants; however, its high cost alone is made possible for job in projects of reuses, areas of low scarcity and of raised costs with the capitation/acquisition of the water, in special, for use for industrial and potable use. The route with better economic conditions and techniques for the job in the treatment of the effluent ones of the improvement of the cashew possesses the sequence to follow: conventional process of separation water-oil, photochemistry process and finally, the complementary biological treatment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work aims at studying the influence of the concentration of calcite, its grain size and sintering temperature to obtain porous coating formulations that meet the design specifications. The experiments involved the physical-chemical and mineralogical caracterization of the raw materials, and mechanical tests on specimens dried and sintered, performing a planning mixture and factorial experiment, using the response surface methodology. The ceramic bodies studied were prepared by dry process, characterized, placed in conformity by uniaxial pressing and sintered at temperatures of 940 º C, 1000ºC, 1060ºC, 1120°C and 1180°C using a fast-firing cycle. The crystalline phases formed during sintering at temperatures under study, revealed the presence of anorthite and wolastonite, and quartz-phase remaining. These phases were mainly responsible for the physical and mechanical properties of the sintered especimens. The results shown that as increases the participation of carbonate in the composition of ceramic bodies there is an increase of water absorption and a slight reduction in linear shrinkage for all sintering temperatures. As for the mechanical strength it was observed that it tended to decrease for sintering at temperatures between 940 ° C and 1060 ° C and to increase for sintering at temperatures above 1060 ° C occurring with greater intensity for compositions with higher content of calcite. The resistence decreased with increasing participation of quartz in all sintering temperatures. The decrease in grain size of calcite caused a slight increase in water absorption for formulation with the same concentration of carbonate, remaining virtually unchanged the results of linear shrinkage and mechanical strength. In conclusion, porous ceramic coating (BIII) can be obtained using high concentrations of calcite and keeping the properties required in technical standards and that the particle size of calcite can be used as tuning parameter for the properties of ceramic products.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The current natural gas production of 52 Mm3d-1 and the large projects for its expansion has been setting new boundaries for the Brazilian industry of oil and gas. So far, one of the biggest challenges regards to the logistics for gas transportation from offshore fields. Therefore, the transformation of natural gas into gasoline, diesel and/or olefins via Fischer-Tropsch synthesis would be an alternative to this matter. In this work, the production of hydrocarbons by Fischer-Tropsch synthesis in a slurry reactor was investigated and a perovskite-type catalyst (LayCu0,4Fe0,6O3 ± d) was used with y varying from 0 to 1 on a molar basis. In addition, Nb2O5 support was also applied in order to observe the selectivity of the produced hydrocarbons by the Fischer-Tropsch process. It is shown that the hydrogen conversion was influenced by the support as well as the different phases of the samples. The kinetic results for the CO2 production suffered great influence with the introduction of the Nb2O5 support throughout the series of samples studied. The catalysts allowed obtaining welldefined cuts of hydrocarbons in the range of C1-C6 and C17-C28, and these results were clearly influenced by the support and the lanthanum content. The higher olefin/paraffin ratio obtained was 1.8 when using a non-supported perovskite with y equal to 0.8. This would indicate the suitability of using this material for the production of olefins

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Increasing concern with the environment, in addition to strict laws, has induced the industries to find altenatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo¬Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. it's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Increasing concern with the environment, in addition to strict laws, has induced the industries to find alternatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo- Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. It's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis discusses family as a social and historical construction and concerns to the perceptions developed by the peripheral youth living in suburbs. It investigates the speeches of young boys and girls who take part in Engenho de sonhos a forum composed by a pool of eleven non-governmental organizations and UFRN which aim is the elaboration and execution of projects focusing local development of poor communities in violence and social exclusion context. Throughout interactive diagnosis seminars in five communities in West Side of Natal with six hundred teenagers, it was detected the need to work with family relationships. In order to build the methodological corpus a range variety of procedures were done such as: interviews, focal groups and psychosocial questionnaires with nine local young leaders. The purpose to understand data guided the research through the theory of social imagery and pointed out the following themes: conceptions, relationship, roles, family projects. Live stories of these young population reveals conflicts when it comes to the configuration of family ties, far from the family model stated by society. Family is also, in their perception, an important space to the development of affection, in experiences of all sorts, affecting personality development and determining behaviors in local contexts. The research concludes stating the urge to comprehend this academic work as a way to fight against symbolic and emotional poverty in family context producing discussions and critical reflection in a permanent relation between juvenile social vulnerability (characterized by lacks of all orders) and potential

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recently the focus given to Web Services and Semantic Web technologies has provided the development of several research projects in different ways to addressing the Web services composition issue. Meanwhile, the challenge of creating an environment that provides the specification of an abstract business process and that it is automatically implemented by a composite service in a dynamic way is considered a currently open problem. WSDL and BPEL provided by industry support only manual service composition because they lack needed semantics so that Web services are discovered, selected and combined by software agents. Services ontology provided by Semantic Web enriches the syntactic descriptions of Web services to facilitate the automation of tasks, such as discovery and composition. This work presents an environment for specifying and ad-hoc executing Web services-based business processes, named WebFlowAH. The WebFlowAH employs common domain ontology to describe both Web services and business processes. It allows processes specification in terms of users goals or desires that are expressed based on the concepts of such common domain ontology. This approach allows processes to be specified in an abstract high level way, unburdening the user from the underline details needed to effectively run the process workflow

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis focuses on the coprecipitation synthesis method for preparation of ceramic materials with perovskite structure, their characterization and application as catalytic material in the reaction of converting CO to CO2 developing a methodological alternative route of synthesis from the middle via oxalate coprecipitation material SrCo0,8Fe0,2O3-d. In order to check the influence of this method, it was also synthesized using a combined citrate - EDTA complexing method. The material was characterized by: X-ray diffraction (XRD), Rietveld refinement method, thermogravimetry and differential thermo analysis (TG / DTA), scanning (SEM) and transmission (TEM) electron microscopy, particle size distribution and surface analysis method BET. Both methods led to post-phase synthesis, with pH as a relevant parameter. The synthesis based on the method via oxalate coprecipitation among particles led to the crystalline phase as those obtained using a combined citrate - EDTA complexing method under the same conditions of heat treatment. The nature of the reagent used via oxalate coprecipitation method produced a material with approximately 80 % lower than the average size of crystallites. Moreover, the via oxalate coprecipitation method precursors obtained in the solid state at low temperature (~ 26 oC), shorter synthesis, greater thermal stability and a higher yield of around 90-95 %, maintaining the same order of magnitude the crystallite size that the combined citrate - EDTA complexing method. For purposes of comparing the catalytic properties of the material was also synthesized by the using a combined citrate - EDTA complexing method. The evaluation of catalytic materials SrCo0,8Fe0,2O3-d LaNi0,3Co0,7O3-d was accompanied on the oxidation of CO to CO2 using a stainless steel tubular reactor in the temperature range of 75-300 oC. The conversion CO gas was evaluated in both materials on the results shaved that the firm conversion was loves for the material LaNi0,3Co0,7O3-d

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Acari-RN is one of the earliest municipalities in the region of Seridó Potiguar in rio Grande do Norte. In this municipality, two feelings coexist: power and loss. The former, justified by the process of occupation, which gave birth to its micro-region and the latter, marked by economic impoverishment, starting from the decade of 1970, with the decline of its main wealth: the cotton economy. From the association of these feelings, the motivation for the construction of this piece of work emerged. In it, poverty and inequality are discussed, in a dialect relation with the territory, through a theoretical-methodological reflection and from the analysis of the data collected in a field research. In order to valorize and enrich the theme and the study of the territory of Acari, it was necessary to compare it with the other municipalities that it generated: Currais Novos, Jardim do Seridó and Parelhas. Therefore, the use of the elements of a quantitative and qualitative research, applied in the study section, aimed at finding the poverty indicators, which make it difficult the development in Acari.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este Ponto de Vista resume as conclusões de um Workshop conjunto, organizado pelos três Programas da FAPESP na Área Ambiental - BIOTA (O Instituto Virtual da Biodiversidade) - BIOEN (Pesquisa em Bioenergia) - Mudanças Climáticas, para discutir a contribuição da comunidade científica para a RIO+20, a Conferência das Nações Unidas para o Desenvolvimento Sustentável. O grupo de pesquisadores brasileiros reunidos pela FAPESP no início de março de 2012 levantou as seguintes preocupações: a) o número reduzido de oportunidades para a comunidade científica interagir com Conferências como a RIO+20; b) as graves deficiências do ZeroDraft, documento produzido pela Divisão das Nações Unidas para o Desenvolvimento Sustentável para a RIO +20; c) o fato do foco de pesquisa dos três Programas de Pesquisa Ambiental da FAPESP - biodiversidade, bioenergia e mudanças climáticas - não estarem na pauta das discussões da RIO+20; d) que pouca ênfase é dada aos oceanos na Agenda da Conferência; e) em relação aos mecanismos de mercado associados com a transição para uma economia mais verde, a necessidade de enfatizar a redução de subsídios perversos e a promoção de incentivos econômicos para atividades ou processos de mitigação e/ou seqüestro de carbono; f) a necessidade de estimular o desenvolvimento e a consolidação da pesquisa na área de avaliação e valoração de serviços ambientais, no Brasil. Os participantes do Workshop reconheceram a necessidade de aprofundar o conhecimento sobre as convenções, tratados e acordos internacionais assinados e ratificados pelo Brasil, bem como as instituições internacionais, programas e iniciativas que promovem a participação da comunidade científica no debate de políticas ambientais globais. Finalmente, do ponto de vista dos três programas da FAPESP dois pontos foram destacados: a) que é imperativo aprofundar o conhecimento científico em cada uma das três áreas focais - biodiversidade, bioenergia e mudanças climáticas - porque é necessário aumentar a massa crítica de pesquisadores e do conhecimento para participar das discussões internacionais nessas áreas estratégicas; b) também é imperativo apoiar e promover projetos de pesquisa que integrem as áreas focais dos três programas, estimulando a constituição de equipes inter e transdisciplinares. Esta é uma tendência mundial na área das mudanças ambientais globais, e os participantes dos três programas sentem que podem dar uma contribuição significativa para o avanço do conhecimento, para o debate internacional e para a efetiva solução dos problemas.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Neste artigo, o autor descreve dois estudos, realizados com professores, nos quais objetos de arte são usados como dispositivos deflagradores de reflexão compartilhada. Teoricamente fundamentado em uma nova modalidade de investigação qualitativa no campo da Educação - a Pesquisa Educacional com Base nas Artes (PEBA) -, ele discute particularidades do funcionamento e do papel dessa modalidade de pesquisa no desenvolvimento profissional docente, as diferentes naturezas dos dois objetos de arte utilizados (a fotografia e o espetáculo teatral) e aponta para duas principais vertentes dessa modalidade de pesquisa - a vertente de produção de significados, pela qual o educador de professores e os participantes da pesquisa compartilham e constroem significados ao entrarem em contato com um objeto de arte previamente pronto e confeccionado por um artista profissional; e a vertente representacional, pela qual os professores e educadores participantes constroem, individualmente ou de forma compartilhada, um determinado objeto de arte que reflita e expresse suas representações do mundo da docência. Por fim, o artigo sugere que a PEBA, além de estabelecer contextos reflexivos nos quais alunos e professores têm oportunidades de desvelar a experiência estética, instaura relações alternativas dos participantes com o conhecimento e com a prática pedagógica, evidenciando sua importância social e suas forças revitalizadoras.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper attempts to assess both the touristic potential of scenic attractions and the environmental impacts resulting from the public use of such attractions in the Rifaina Municipality, State of São Paulo, Southeastern Brazil. In the recent past, this municipality had its economy concentrated in rural activities (livestock, corn, rice and bean crops) and in the ceramic industry (production of bricks, tiles and shackles),which was largely developed in the floodplain of the Rio Grande before the construction of the Jaguara Power Plant Dam. The impacts resulting from touristic activities were evaluated by applying the VIM - Visitor Impact Management method, with emphasis on biophysical indicators. The main touristic attractions analyzed were: (1) Rifaina artificial beach; (2) Jaguara Reservoir; (3) Morro do Chapéu (scenic hill); (4) Touristic railroad; and (5) Cuestas cliffs. Attractions (1) and (2) are the most exploited ones, including, in the second case, nautical sports, sportive and craft fishing, and summer lodging. Although currently disabled, the touristic railroad presents potential conditions to be re-explored. Attractions (3) and (5), despite keeping high landscape and ecological ecotouristic potential, are the least visited places. In the present paper, a preliminary characterization of the major issues of tourism industry in the Rifaina municipality is made, including suggestions for the sustainable exploitation of tourism resources. The final results of the environmental impact evaluation of the tourism activities include small impacts in attractions (4) and (5) and moderate impacts to the three first attractions. In order to keep the sustainable touristic potential for that municipality this study proposes the improvement of the following measures: to foster research projects on technical or scientific aspects of the touristic attractions, improvement of tourism infrastructure and the creation of an Environmental Protection Area (APA) of the cuestas' scarps.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)