Relationship Between the Development of the Spinal Canal and the Etiopathogenesis of Lumbar Spinal Stenosis

INTRODUCTION: The presence of a pre-existing narrow spinal canal may have an important place in the ethiopathogenesis of lumbar spinal stenosis. By consequence the study of the development of the spinal canal is crucial. The first goal of this work is to do a comprehensive literature search and to give an essential view on the development of spinal canal and its depending factors studied until now. The second goal is to give some considerations and hypothesize new leads for clinically useful researches. MATERIALS AND METHODS: A bibliographical research was executed using different search engines: PubMed, Google Schoolar ©, Ovid ® and Web Of Science ©. Free sources and avaible from the University of Lausanne (UNIL) and Centre Hospitalier Universitaire Vaudois (CHUV) were used. At the end of the bibliographic researches 114 references were found, 85 were free access and just 41 were cited in this work. Most of the found references are in English or in French. RESULTS AND DISCUSSION: The spinal canal is principally limited by the vertebrae which have a mesodermal origin. The nervous (ectodermal) tissue significantly influences the growth of the canal. The most important structure participating in the spinal canal growth is the neurocentral synchondrosis in almost the entire vertebral column. The fusion of the half posterior arches seems to have less importance for the canal size. The growth is not homogeneous but, depends on the vertebral level. Timing, rate and growth potentials differ by regions. Especially in the case of the lumbar segment, there is a craniocaudal tendency which entails a greater post-natal catch-up growth for distal vertebrae. Trefoil-shape of the L5 canal is the consequence of a sagittal growth deficiency. The spinal canal shares some developmental characteristics with different structures and systems, especially with the central nervous system. It may be the consequence of the embryological origin. It is supposed that not all the related structures would be affected by a growth impairment because of the different catch-up potentials. Studies found that narrower spinal canals might be related with cardiovascular and gastrointestinal symptoms, lower thymic function, bone mineral content, dental hypoplasia and Harris' lines. Anthropometric correlations found at birth disappear during the pediatric age. All factors which can affect bone and nervous growth might be relevant. Genetic predispositions are the only factors that can never be changed but the real impact is to ascertain. During the antenatal period, all the elements determining a good supply of blood and oxygen may influence the vertebral canal development, for example smoking during pregnancy. Diet is a crucial factor having an impact on both antenatal and postnatal growth. Proteins intake is the only proved dietetic relationship found in the bibliographic research of this work. The mechanical effects due to locomotion changes are unknown. Socioeconomic situation has an impact on several influencing factors and it is difficult to study it owing to numerous bias. CONCLUSIONS: A correct growth of spinal canal is evidently relevant to prevent not-degenerative stenotic conditions. But a "congenital" narrower canal may aggravate degenerative stenosis. This concerns specific groups of patient. If the size of the canal is highly involved in the pathogenesis of common back pains, a hypothetical measure to prevent developmental impairments could have a not- negligible impact on the society. It would be interesting to study more about dietetic necessities for a good spinal canal development. Understanding the relationship between nervous tissues and vertebra it might be useful in identifying what is needed for the ideal development. Genetic importance and the post-natal influences of upright standing on the canal growth remain unsolved questions. All these tracks may have a double purpose: knowing if it is possible to decrease the incidence of narrower spinal canal and consequently finding possible preventive measures. The development of vertebral canal is a complex subject which ranges over a wide variety of fields. The knowledge of this subject is an indispensable tool to understand and hypothesize the influencing factors that might lead to stenotic conditions. Unfortunately, a lack of information makes difficult to have a complete and satisfactory interdisciplinary vision.

Supporting interdisciplinary case studies: development and implementation of a joint learning environment for students in forensic science and criminal law

Scientific reporting and communication is a challenging topic for which traditional study programs do not offer structured learning activities on a regular basis. This paper reports on the development and implementation of a web application and associated learning activities that intend to raise the awareness of reporting and communication issues among students in forensic science and law. The project covers interdisciplinary case studies based on a library of written reports about forensic examinations. Special features of the web framework, in particular a report annotation tool, support the design of various individual and group learning activities that focus on the development of knowledge and competence in dealing with reporting and communication challenges in the students' future areas of professional activity.

Safety and functional outcome of thrombolysis in dissection-related ischemic stroke: a meta-analysis of individual patient data.

Background and Purpose-The safety and efficacy of thrombolysis in cervical artery dissection (CAD) are controversial. The aim of this meta-analysis was to pool all individual patient data and provide a valid estimate of safety and outcome of thrombolysis in CAD.Methods-We performed a systematic literature search on intravenous and intra-arterial thrombolysis in CAD. We calculated the rates of pooled symptomatic intracranial hemorrhage and mortality and indirectly compared them with matched controls from the Safe Implementation of Thrombolysis in Stroke-International Stroke Thrombolysis Register. We applied multivariate regression models to identify predictors of excellent (modified Rankin Scale=0 to 1) and favorable (modified Rankin Scale=0 to 2) outcome.Results-We obtained individual patient data of 180 patients from 14 retrospective series and 22 case reports. Patients were predominantly female (68%), with a mean +/- SD age of 46 +/- 11 years. Most patients presented with severe stroke (median National Institutes of Health Stroke Scale score=16). Treatment was intravenous thrombolysis in 67% and intra-arterial thrombolysis in 33%. Median follow-up was 3 months. The pooled symptomatic intracranial hemorrhage rate was 3.1% (95% CI, 1.3 to 7.2). Overall mortality was 8.1% (95% CI, 4.9 to 13.2), and 41.0% (95% CI, 31.4 to 51.4) had an excellent outcome. Stroke severity was a strong predictor of outcome. Overlapping confidence intervals of end points indicated no relevant differences with matched controls from the Safe Implementation of Thrombolysis in Stroke-International Stroke Thrombolysis Register.Conclusions-Safety and outcome of thrombolysis in patients with CAD-related stroke appear similar to those for stroke from all causes. Based on our findings, thrombolysis should not be withheld in patients with CAD. (Stroke. 2011;42:2515-2520.)

Family history of cancer and the risk of cancer: a network of case-control studies.

BACKGROUND: The risk of many cancers is higher in subjects with a family history (FH) of cancer at a concordant site. However, few studies investigated FH of cancer at discordant sites. PATIENTS AND METHODS: This study is based on a network of Italian and Swiss case-control studies on 13 cancer sites conducted between 1991 and 2009, and including more than 12 000 cases and 11 000 controls. We collected information on history of any cancer in first degree relatives, and age at diagnosis. Odds ratios (ORs) for FH were calculated by multiple logistic regression models, adjusted for major confounding factors. RESULTS: All sites showed an excess risk in relation to FH of cancer at the same site. Increased risks were also found for oral and pharyngeal cancer and FH of laryngeal cancer (OR = 3.3), esophageal cancer and FH of oral and pharyngeal cancer (OR = 4.1), breast cancer and FH of colorectal cancer (OR = 1.5) and of hemolymphopoietic cancers (OR = 1.7), ovarian cancer and FH of breast cancer (OR = 2.3), and prostate cancer and FH of bladder cancer (OR = 3.4). For most cancer sites, the association with FH was stronger when the proband was affected at age <60 years. CONCLUSIONS: Our results point to several potential cancer syndromes that appear among close relatives and may indicate the presence of genetic factors influencing multiple cancer sites.

Case Study of Seasonal Variation in the Subgrade and Subbase Layers of Highway US 20, TR-516, 2008

Seasonal variations in ground temperature and moisture content influence the load carrying capacity of pavement subgrade layers. To improve pavement performance, pavement design guidelines require knowledge of environmental factors and subgrade stiffness relationships. As part of this study, in-ground instrumentation was installed in the pavement foundation layers of a newly constructed section along US Highway 20 near Fort Dodge, Iowa, to monitor the seasonal variations in temperature, frost depth, groundwater levels, and moisture regime. Dynamic cone penetrometer (DCP), nuclear gauge, and Clegg hammer tests were performed at 64 test points in a 6-ft x 6-ft grid pattern to characterize the subgrade stiffness properties (i.e., resilient modulus) prior to paving. The purpose of this paper is to present the field instrumentation results and the observed changes in soil properties due to seasonal environmental effects.

Multivariable regression analysis and hot-spot stress approach into fatigue life estimations of welded joints

Kolmen eri hitsausliitoksen väsymisikä arvio on analysoitu monimuuttuja regressio analyysin avulla. Regression perustana on laaja S-N tietokanta joka on kerätty kirjallisuudesta. Tarkastellut liitokset ovat tasalevy liitos, krusiformi liitos ja pitkittäisripa levyssä. Muuttujina ovat jännitysvaihtelu, kuormitetun levyn paksuus ja kuormitus tapa. Paksuus effekti on käsitelty uudelleen kaikkia kolmea liitosta ajatellen. Uudelleen käsittelyn avulla on varmistettu paksuus effektin olemassa olo ennen monimuuttuja regressioon siirtymistä. Lineaariset väsymisikä yhtalöt on ajettu kolmelle hitsausliitokselle ottaen huomioon kuormitetun levyn paksuus sekä kuormitus tapa. Väsymisikä yhtalöitä on verrattu ja keskusteltu testitulosten valossa, jotka on kerätty kirjallisuudesta. Neljä tutkimustaon tehty kerättyjen väsymistestien joukosta ja erilaisia väsymisikä arvio metodeja on käytetty väsymisiän arviointiin. Tuloksia on tarkasteltu ja niistä keskusteltu oikeiden testien valossa. Tutkimuksissa on katsottu 2mm ja 6mm symmetristäpitkittäisripaa levyssä, 12.7mm epäsymmetristä pitkittäisripaa, 38mm symmetristä pitkittäisripaa vääntökuormituksessa ja 25mm/38mm kuorman kantavaa krusiformi liitosta vääntökuormituksessa. Mallinnus on tehty niin lähelle testi liitosta kuin mahdollista. Väsymisikä arviointi metodit sisältävät hot-spot metodin jossa hot-spot jännitys on laskettu kahta lineaarista ja epälineaarista ekstrapolointiakäyttäen sekä paksuuden läpi integrointia käyttäen. Lovijännitys ja murtumismekaniikka metodeja on käytetty krusiformi liitosta laskiessa.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

Tarkastelumallin kehittäminen hulevesien hallinnalle ilmastonmuutosolosuhteissa Suomessa, Case Imatra

Tulevaisuudessa ilmastonmuutos ja kaupungistuminen vaikuttavat monin eri tavoin hulevesienhallintaan. Useiden ennusteiden mukaan rankkasateet lisääntyvät huomattavassa määrin seuraavien sadan vuoden aikana. Ilmastonmuutos yhdistettynä maankäytön tehostumiseen lisää rankkasateiden aiheuttamia tulvia. Hulevesien hallintaan liittyvät haasteet lisääntyvät tulevaisuudessa. Suomessa ylimääräisen haasteen tuovat talviolosuhteet, joiden merkitys onnistuneessa hulevesien hallinnan suunnittelussa on huomioitava. Ilmastonmuutoksen tuomiin haasteisiin vastaaminen edellyttää monien eri asiantuntijoiden, kuten maankäytönsuunnittelun, kaavoituksen, teknisen toimen ja pelastuslaitoksen yhteistyötä. Näiden ajatusten pohjalta diplomityössä kehitettiin toimintamalli ja -kaavio, joita voidaan hyödyntää kaupunkien ja kuntien hulevesien käsittelyn suunnittelussa. Toimintamalli kehittely pohjautuu osittain Hämeenlinnan hulevesistrategiaan. Diplomityössä selvitettiin myös kolmen erilaisen taajaman hulevesien hallintaa Imatran kaupungissa. Tarkastelussa selvitettiin kyseisten alueiden nykyinen hulevesien käsittely ja sen ongelmakohdat. Näiden pohjalta mietittiin kullekin valuma-alueelle sopiva luonnonmukainen käsittelymenetelmä. Työn yhtenä tavoitteena on luoda hulevesistrategia Imatralle.

Viestintä ravitsemusosaamisen kehittämisessä Case:Sairaalan ateriaprosessi

Tutkielman tarkoituksena oli tutkia viestinnän merkitystä osaamisen kehittämisessä. Tavoitteena oli tutkia, miten viestintä edistää ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksessa etsittiin vastausta kysymyksiin, mitkä ovat ravitsemusosaamisen kehittämisen ja viestinnän tavoitteet, millä työyhteisöviestinnän foorumeilla uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ja millaisia työssä oppimisen prosesseja näillä foorumeilla on tunnistettavissa. Empirian näkökulmasta tutkimusta voidaan kuvata tapaustutkimukseksi. Tapauksena on sairaalan ateriaprosessi. Tutkimuksen valmistelevana aineistona käytettiin uutta ravitsemushoitosuositusta (Nuutinen ym. 2010), jota täydennettiin haastatteluaineistolla. Tutkimuksessa ovat edustettuina hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntemuksen näkökulmat sairaalasta sekä ammatti- ja aikuisopistosta. Tutkimusmenetelmänä käytettiin teemahaastatteluja. Haastattelut nauhoitettiin ja litteroitiin tekstimuotoon. Aineisto analysoitiin teemakortiston ja teemoittelun avulla. Tutkimuksen tulokset osoittavat, että ravitsemusosaamisen kehittämisen tavoitteena on uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttaminen sairaalan ravitsemushoidon prosesseissa ja tuotteissa. Ravitsemusosaamisen kehittämisen tavoitteena on tässä yhteydessä ateriaprosessin ja ruokapalvelun tuotteiden eli ruokavalioiden kehittäminen. Ravitsemushoidon kehittämisen tarkoituksena on asiakkaiden toipumisen, elämänlaadun ja hyvinvoinnin edistäminen sekä terveydenhuollon kustannusten säästäminen. Viestinnällä on tärkeä merkitys ravitsemusosaamisen kehittämisessä. Viestinnän avulla edistetään yksilöllistä ja yhteistä eli tiimioppimista vuorovaikutuksen kautta. Ruokapalvelu- ja hoitohenkilöstön sekä ravitsemushoidon asiantuntijoiden välinen vuoropuhelu nähdään tärkeänä ravitsemusosaamisen kehittämisessä. Vuoropuhelun avulla vahvistetaan ravitsemushoitoon liittyvää tietopohjaa ja yhteistä käsitteistöä. Tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ulkoisissa ja sisäisissä verkostoissa esimerkiksi ravitsemus-yhdyshenkilöverkoston tapaamisissa, moniammatillisissa työryhmissä, henkilöstö- ja oppisopimuskoulutuksissa sekä työfoorumilla eli fyysisessä työtilassa ja hyödyntäen viestintäteknologiaa. Hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntijoilla/opettajilla on tärkeä rooli ravitsemusosaamisen kehittämiseen liittyvässä työssä oppimisen ohjaamisessa. Ravitsemusosaamisen kehittämisessä on tunnistettavissa sosiaalisia, reflektiivisiä, kognitiivisia ja operationaalisia työssä oppimisen prosesseja. Sosiaalisia prosesseja ovat työkokemusten vaihdanta ja reflektiivisiä niiden arviointi. Kognitiivisten prosessien tarkoitus on tiedonhankinta ja prosessointi, jolloin yhdistetään kokemustietoa sekä uutta ravitsemustieteellistä tietoa. Tavoitteena on yhteisen kielen ja toimintamallin luominen, jota kokeillaan käytännössä. Operationaalisia prosesseja ovat fyysisessä työtilassa tapahtuva kokeilemalla, tekemällä ja soveltamalla oppiminen, jolloin uutta toimintamallia esimerkiksi vajaaravitsemuksen seulontaa, ateriatilausta tai reseptiikkaa kokeillaan käytännössä. Johtopäätöksenä voidaan todeta, että sairaalassa on omaksuttu oppivan organisaation periaatteita ravitsemusosaamisen kehittämisessä. Ravitsemusosaamisen kehittäminen on yhteydessä muutokseen, strategiaan, prosessien ja tuotteiden kehittämiseen. Viestinnän avulla edistetään ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttamista sairaalan ateriaprosessissa ja ruokavalioissa. Hoito- ja ruokapalveluhenkilöstön sekä ravitsemushoidon asiantuntijoiden välisen vuoropuhelun tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Tutkimus palvelee ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksen tuloksia on mahdollista käyttää vertailuoppimismateriaalina terveydenhuollon organisaatioissa ja verkostoissa.

Self-deposit, discovery, and delivery of scientific GIS datasets using GeoHydra

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Fit For Action: A Comparative Case Study of the Implementation of an Adaptive Fitness and Conditioning Program for Moderate Functioning Teens and Transition Age Youth with ASD

The purpose of my research was to develop and refine pedagogic approaches, and establish fitness baselines to adapt fitness and conditioning programs for Moderate-functioning ASD individuals. I conducted a seven-week study with two teens and two trainers. The trainers implemented individualized fitness and conditioning programs that I developed. I conducted pre and post fitness baselines for each teen, a pre and post study interview with the trainers, and recorded semi-structured observations during each session. I used multi-level, within-case and across case analyses, working inductively and deductively. My findings indicated that fundamental movement concepts can be used to establish fitness baselines and develop individualized fitness programs. I tracked and evaluated progressions and improvements using conventional measurements applied to unconventional movements. This process contributed to understanding and making relevant modifications to activities as effective pedagogic strategies for my trainers. Further research should investigate fitness and conditioning programs with lower functioning ASD individuals.

New Generation Antidepressants in Painful Diabetic Neuropathy

The incidence of diabetic neuropathy increases with the duration of diabetes and the degree of hyperglycaemia. Pain is one of the most common and incapacitating symptoms of diabetic neuropathy and its pharmacological control is complex. The effectiveness of antidepressive agents has been described in different types of neuropathic pain, but their effectiveness, when used as analgesics in painful diabetic neuropathy, still remains controversial. Objective: To review the possible role of new-generation antidepressive agents in the treatment of pain in diabetic peripheral neuropathy. This work has thus consisted of a meta-analysis for determining which antidepressive agent had the best analgesic potential in managing pain in patients suffering from painful diabetic neuropathy. Methods: This search covered the Cochrane, MEDLINE, EMBASE and LILACS databases, between January 2000 and August 2007. The following information was obtained from each article: criteria for diagnosing diabetic neuropathy, patients' age average, antidepressant drug received and dose, sample size, duration of the disease and treatment follow-up, outcome measurement, evaluation of pain and rescue medication. Results: A combined RR: 1.67 (95% CI 1.38 - 2.02) was obtained; this result indicated that the antidepressive agent duloxetine, was effective for controlling pain in diabetic neuropathy. The corresponding NNT for Duloxetine was established, according to our interests; NNT = 6 (95% CI 5- 8) for achieving greater than 50% analgesia in patients suffering from painful diabetic neuropathy. Discussion: Antidepressive agents are frequently employed in the specific case of diabetic neuropathy; their analgesic benefit has been demonstrated.

Literature, literacy and the discourses of English teaching: a case study

This article examines the discourses of English teaching, and their implications for subject and literacy teaching and learning. Case study evidence is presented to illustrate the ways in which competing discourses are enacted in the classroom. We argue the need to critically examine the educational value of teacher discourses, which have an important impact on instructional practices and the quality of pupils' learning.

Resource allocation analysis of the stochastic diffusion search

The Stochastic Diffusion Search (SDS) was developed as a solution to the best-fit search problem. Thus, as a special case it is capable of solving the transform invariant pattern recognition problem. SDS is efficient and, although inherently probabilistic, produces very reliable solutions in widely ranging search conditions. However, to date a systematic formal investigation of its properties has not been carried out. This thesis addresses this problem. The thesis reports results pertaining to the global convergence of SDS as well as characterising its time complexity. However, the main emphasis of the work, reports on the resource allocation aspect of the Stochastic Diffusion Search operations. The thesis introduces a novel model of the algorithm, generalising an Ehrenfest Urn Model from statistical physics. This approach makes it possible to obtain a thorough characterisation of the response of the algorithm in terms of the parameters describing the search conditions in case of a unique best-fit pattern in the search space. This model is further generalised in order to account for different search conditions: two solutions in the search space and search for a unique solution in a noisy search space. Also an approximate solution in the case of two alternative solutions is proposed and compared with predictions of the extended Ehrenfest Urn model. The analysis performed enabled a quantitative characterisation of the Stochastic Diffusion Search in terms of exploration and exploitation of the search space. It appeared that SDS is biased towards the latter mode of operation. This novel perspective on the Stochastic Diffusion Search lead to an investigation of extensions of the standard SDS, which would strike a different balance between these two modes of search space processing. Thus, two novel algorithms were derived from the standard Stochastic Diffusion Search, ‘context-free’ and ‘context-sensitive’ SDS, and their properties were analysed with respect to resource allocation. It appeared that they shared some of the desired features of their predecessor but also possessed some properties not present in the classic SDS. The theory developed in the thesis was illustrated throughout with carefully chosen simulations of a best-fit search for a string pattern, a simple but representative domain, enabling careful control of search conditions.