Sentiment de finitude de vie et de coping chez le patient face à l'annonce d'un cancer digestif étude descriptive correlationnelle

Problématique. Le cancer digestif est une maladie qui s'accompagne de nombreux décès. L'annonce d'un tel diagnostic engendre une crise existentielle composée d'un sentiment de finitude de la vie. Des réactions psychosociales accompagnent cette mauvaise nouvelle. Un concept particulier appelé le transitoriness est omniprésent. La personne lutte pour continuer à vivre. Elle adopte des stratégies de coping pour s'ajuster aux difficultés imposées par ce sentiment de finitude de vie. But. Décrire le niveau de sentiment de finitude de vie et les stratégies de coping utilisées face à l'annonce du diagnostic d'un cancer digestif et explorer la présence d'associations entre les variables. Méthode. Cette étude descriptive corrélationnelle a été conduite auprès de 40 personnes hospitalisées pour une intervention chirurgicale, recrutées selon un échantillonnage de convenance. Le protocole de recherche a été avalisé par le comité cantonal d'éthique. Les données ont été recueillies par un formulaire de données sociodémographiques et de santé ainsi que deux instruments de mesure : le SEKT (Subjektive Einschätzung von Krankheitssituation und Todesnähe) a permis de mesurer le sentiment de finitude de vie et le JCS (Jalowiec Coping Scale) a été employé pour recueillir les stratégies de coping. Les deux instruments de mesure n'étant pas disponibles en français, une procédure de traduction et retraduction a été effectuée et avalisée par un comité d'expert. Des analyses descriptives et corrélationnelles ont été réalisées. Résultats. L'échantillon est composé majoritairement d'hommes (51%), âgés entre 56- 74 ans (52,5%), mariés (45%) et avec enfants âgés de plus de 20 ans (60%). Il apparaît une forte proportion de personnes d'une autre nationalité (40%) que la suisse et avec une formation obligatoire (40%). Le sentiment de finitude de vie est présent: 62% réalisent que le cancer représente une menace pour leur vie. Les préoccupations autour de la mort sont « quelquefois » présentes (32,5%). Les personnes se sentent « un peu » à « proche » de la mort et le score total de la proximité est de M = 3,37 (ĒT= 1,77 ; rang: 0-8). Le style de coping privilégié est l'optimisme (M = 2,10), puis l'indépendance (M = 1,95) et l'affrontement de la situation (M =1,80). Aucune relation entre le sentiment de finitude de vie et le score total de coping n'apparaît, si ce n'est une probabilité p< 0,08 entre le sentiment de finitude de vie et les styles de coping expression des émotions et indépendance. La relation entre le sentiment de finitude de vie et la variable sociodémographique la nationalité présente une probabilité marginale (p= 0,058). Certains facteurs sociodémographiques influencent l'utilisation des différentes stratégies de coping : affrontement de la situation (p= 0,0007), coping palliatif (p= 0,0449) et niveau de formation; optimisme et genre (p= 0,0424) ; expression des émotions et âge (p= 0,045); indépendance et nationalité (p= 0,0319); soutien social et nombre d'enfants (p= 0,0016). Conclusion. Les professionnels de la santé doivent être sensibilisés aux spécificités du transitoriness et aux facteurs influençant l'utilisation de stratégies de coping efficaces afin de détecter les personnes vulnérables et de cibler leurs interventions de soins pour diminuer le risque de détresse et son impact sur la qualité de vie du patient.

Le bien-être spirituel des personnes nouvellement diagnostiquees d'un cancer en début de traitement : étude descriptive correlationnelle

Problématique. Le cancer touche beaucoup de personnes en Suisse et un grand nombre en décèdent encore. Recevoir une telle annonce plonge le malade dans une crise spirituelle qui bouleverse complètement sa vie. L'incertitude de son avenir, la sensibilisation à sa finitude sont exacerbées par la proximité de la mort et par les symptômes du cancer: combien de temps les malades vont-ils encore vivre ? Qu'adviendra-t-il de leur corps désormais confronté aux symptômes du cancer et à ses traitements? Les professionnels de la santé s'attacheraient davantage au bien-être spirituel des personnes en phase palliative et peu d'études se sont intéressées au bien-être spirituel des personnes en début de traitement au moment d'une telle nouvelle. But. Décrire le bien-être spirituel des personnes nouvellement diagnostiquées d'un cancer en début de traitement, explorer sa relation avec les symptômes du cancer et l'interdépendance des différentes variables. Méthode. Cette recherche descriptive corrélationnelle a été conduite auprès de 30 patients recrutés selon un échantillonnage de convenance dans un centre d'oncologie ambulatoire situé dans un hôpital universitaire suisse. Les données ont été recueillies au moyen d'un formulaire de données sociodémographiques et de santé ainsi que de deux instruments de mesure: ESAS (Edmonton Symptom Assessment System) (Bruera, Kuehn, Miller, Selmser, & Macmillan, 1991) et FACIT-Sp-12 (Functional Assessment of Chronic Ilness Therapy-Spiritual Well- Being) (Canada, Murphy, Fitchett, Peterman, & Schover, 2008). Le premier a permis de mesurer les symptômes du cancer et le second, le bien-être spirituel. Les données ont été traitées par des analyses descriptives et corrélationnelles avec le logiciel STATA Version 11. Résultats. Les répondants étaient représentés en majorité par des femmes (73%) atteintes d'un cancer du sein (60%). La plupart des participants étaient croyants (97%) de confession catholique (50%), protestante (47%) ou musulmane (3%). Sur un rang de 0 à 48, la plupart des participants ont présenté un niveau de bien-être spirituel élevé (M=36,5 ; ĒT=6,6). Les dimensions de ce dernier atteignaient également de très bon scores : sur un rang de 0 à 16, la dimension sens affichait la moyenne la plus élevée (M=14,2 ; ĒT=1,9), suivie de celle de paix (M=12,1 ; ĒT=2,7) et finalement de celle de foi (M=10,2 ; ĒT=3,2). Le bien-être spirituel était lié significativement à l'âge (p= 0,04), à la dépression (p= 0,01) et au mal-être (p= 0,02) : être jeune, présenter des symptomatologies dépressives et de mal-être influencent négativement le bien-être spirituel des malades. Conclusions. Dépister précocement la dépression et le mal-être des personnes qui surgissent souvent à la révélation du cancer est important. Il faut se soucier particulièrement du bien-être spirituel des personnes âgées et les accompagner dans leur quête de sens singulière par la prière, l'abnégation, le récit de vie, les relations avec l'entourage, l'introspection, pour adoucir l'incertitude de l'avenir et la mouvance identitaire qui composent désormais leur quotidien.

Etude descriptive des médicaments non utilisés collectés dans une officine française de la Région Centre

[...] Cette étude a permis d'évaluer ce que représente le coût des MNU [médicaments non utilisés] à l'officine sur une période donnée. Les résultats ont traduit un gaspdlage certain des ressources de santé. La fin du recyclage humanitaire des médicaments étant décidé par les autorités publiques depuis le 11 janvier 2007, la collecte des MNU à l'officine garde un intérêt dans la protection de l'environnement et la prévention des accidents domestiques. Mais les pharmaciens pourraient participer à la prévention de ces gaspillages par un renforcement des mesures d'informations sur le bon usage des médicaments et par une attention particulière donnée au monitoring et au soutien de l'adhésion thérapeutique des patients ('programmes de soins pharmaceutiques).[Auteure, p. 4]

HPV & head and neck cancer: a descriptive update

The incidence of head and neck squamous cell carcinoma (HNSCC) has been gradually increasing over the last three decades. Recent data have now attributed a viral aetiology to a subset of head and neck cancers. Several studies indicate that oral human papillomavirus (HPV) infection is likely to be sexually acquired. The dominance of HPV 16 in HPV+ HNSCC is even greater than that seen in cervical carcinoma of total worldwide cases. Strong evidence suggests that HPV+ status is an important prognostic factor associated with a favourable outcome in head and neck cancers. Approximately 30 to 40% of HNSCC patients with present with early stage I/II disease. These patients are treated with curative intent using single modality treatments either radiation or surgery alone. A non-operative approach is favored for patients in which surgery followed by either radiation alone or radiochemotherapy may lead to severe functional impairment. Cetuximab, a humanized mouse anti-EGFR IgG1 monoclonal antibody, improved locoregional control and overall survival in combination with radiotherapy in locally advanced tumours but at the cost of some increased cardiac morbidity and mortality. Finally, the improved prognosis and treatment responses to chemotherapy and radiotherapy by HPV+ tumours may suggest that HPV status detection is required to better plan and individualize patient treatment regimes.

Performance Improvement of Centrifugal Compressor Stage with Pinched Geometry or Vaned Diffuser

Centrifugal compressors are widely used for example in refrigeration processes, the oil and gas industry, superchargers, and waste water treatment. In this work, five different vaneless diffusers and six different vaned diffusers are investigated numerically. The vaneless diffusers vary only by their diffuser width, so that four of the geometries have pinch implemented to them. Pinch means a decrease in the diffuser width. Four of the vaned diffusers have the same vane turning angle and a different number of vanes, and two have different vane turning angles. The flow solver used to solve the flow fields is Finflo, which is a Navier-Stokes solver. All the cases are modeled with the Chien's k – έ- turbulence model, and selected cases are modeled also with the k – ώ-SST turbulence model. All five vaneless diffusers and three vaned diffusers are investigated also experimentally. For each construction, the compressor operating map is measured according to relevant standards. In addition to this, the flow fields before and after the diffuser are measured with static and total pressure, flow angle and total temperature measurements. When comparing the computational results to the measured results, it is evident that the k – ώ-SST turbulence model predicts the flow fields better. The simulation results indicate that it is possible to improve the efficiency with the pinch, and according to the numerical results, the two best geometries are the ones with most pinch at the shroud. These geometries have approximately 4 percentage points higher efficiency than the unpinched vaneless diffusers. The hub pinch does not seem to have any major benefits. In general, the pinches make the flow fields before and after the diffuser more uniform. The pinch also seems to improve the impeller efficiency. This is down to two reasons. The major reason is that the pinch decreases the size of slow flow and possible backflow region located near the shroud after the impeller. Secondly, the pinches decrease the flow velocity in the tip clearance, leading to a smaller tip leakage flow and therefore slightly better impeller efficiency. Also some of the vaned diffusers improve the efficiency, the increment being 1...3 percentage points, when compared to the vaneless unpinched geometry. The measurement results confirm that the pinch is beneficial to the performance of the compressor. The flow fields are more uniform with the pinched cases, and the slow flow regions are smaller. The peak efficiency is approximately 2 percentage points and the design point efficiency approximately 4 percentage points higher with the pinched geometries than with the un- pinched geometry. According to the measurements, the two best geometries are the ones with the most pinch at the shroud, the case with the pinch only at the shroud being slightly better of the two. The vaned diffusers also have better efficiency than the vaneless unpinched geometries. However, the pinched cases have even better efficiencies. The vaned diffusers narrow the operating range considerably, whilst the pinch has no significant effect on the operating range.

Health-related quality of life in the Cambridge City over-75s Cohort (CC75C): development of a dementia-specific scale and descriptive analyses.

BACKGROUND: The assessment of Health Related Quality of Life (HRQL) is important in people with dementia as it could influence their care and support plan. Many studies on dementia do not specifically set out to measure dementia-specific HRQL but do include related items. The aim of this study is to explore the distribution of HRQL by functional and socio-demographic variables in a population-based setting. METHODS: Domains of DEMQOL's conceptual framework were mapped in the Cambridge City over 75's Cohort (CC75C) Study. HRQL was estimated in 110 participants aged 80+ years with a confirmed diagnosis of dementia with mild/moderate severity. Acceptability (missing values and normality of the total score), internal consistency (Cronbach's alpha), convergent, discriminant and known group differences validity (Spearman correlations, Wilcoxon Mann-Whitney and Kruskal-Wallis tests) were assessed. The distribution of HRQL by socio-demographic and functional descriptors was explored. RESULTS: The HRQL score ranged from 0 to 16 and showed an internal consistency Alpha of 0.74. Validity of the instrument was found to be acceptable. Men had higher HRQL than women. Marital status had a greater effect on HRQL for men than it did for women. The HRQL of those with good self-reported health was higher than those with fair/poor self-reported health. HRQL was not associated with dementia severity. CONCLUSIONS: To our knowledge this is the first study to examine the distribution of dementia-specific HRQL in a population sample of the very old. We have mapped an existing conceptual framework of dementia specific HRQL onto an existing study and demonstrated the feasibility of this approach. Findings in this study suggest that whereas there is big emphasis in dementia severity, characteristics such as gender should be taken into account when assessing and implementing programmes to improve HRQL.

New computer software for defining the three-dimensional geometry for a centrifu- gal compressor impeller

In this thesis, a computer software for defining the geometry for a centrifugal compressor impeller is designed and implemented. The project is done under the supervision of Laboratory of Fluid Dynamics in Lappeenranta University of Technology. This thesis is similar to the thesis written by Tomi Putus (2009) in which a centrifugal compressor impeller flow channel is researched and commonly used design practices are reviewed. Putus wrote a computer software which can be used to define impeller’s three-dimensional geometry based on the basic geometrical dimensions given by a preliminary design. The software designed in this thesis is almost similar but it uses a different programming language (C++) and a different way to define the shape of the impeller meridional projection.

Pencil grip : a descriptive model and four empirical studies

Previous studies on pencil grip have typically dealt with the developmental aspects in young children while handwriting research is mainly concerned with speed and legibility. Studies linking these areas are few. Evaluation of the existing pencil grip studies is hampered by methodological inconsistencies. The operational definitions of pencil grip arerational but tend to be oversimplified while detailed descriptors tend to be impractical due to their multiplicity. The present study introduces a descriptive two-dimensional model for the categorisation of pencil grip suitable for research applications in a classroom setting. The model is used in four empirical studies of children during the first six years of writing instruction. Study 1 describes the pencil grips observed in a large group of pupils in Finland (n = 504). The results indicate that in Finland the majority of grips resemble the traditional dynamic tripod grip. Significant genderrelated differences in pencil grip were observed. Study 2 is a longitudinal exploration of grip stability vs. change (n = 117). Both expected and unexpected changes were observed in about 25 per cent of the children's grips over four years. A new finding emerged using the present model for categorisation: whereas pencil grips would change, either in terms of ease of grip manipulation or grip configuration, no instances were found where a grip would have changed concurrently on both dimensions. Study 3 is a cross-cultural comparison of grips observed in Finland and the USA (n = 793). The distribution of the pencil grips observed in the American pupils was significantly different from those found in Finland. The cross-cultural disparity is most likely related to the differences in the onset of writing instruction. The differences between the boys' and girls' grips in the American group were non-significant.An implication of Studies 2 and 3 is that the initial pencil grip is of foremost importance since pencil grips are largely stable over time. Study 4 connects the pencil grips to assessment of the mechanics of writing (n = 61). It seems that certain previously not recommended pencil grips might nevertheless be includedamong those accepted since they did not appear to hamper either fluency or legibility.

Influence of data acquisition geometry on soybean spectral response simulated by the prosail model

View angle and directional effects significantly affect reflectance and vegetation indices, especially when daily images collected by large field-of-view (FOV) sensors like the Moderate Resolution Imaging Spectroradiometer (MODIS) are used. In this study, the PROSAIL radiative transfer model was chosen to evaluate the impact of the geometry of data acquisition on soybean reflectance and two vegetation indices (Normalized Difference Vegetation Index - NDVI and Enhanced Vegetation Index -EVI) by varying biochemical and biophysical parameters of the crop. Input values for PROSAIL simulation were based on the literature and were adjusted by the comparison between simulated and real satellite soybean spectra acquired by the MODIS/Terra and hyperspectral Hyperion/Earth Observing-One (EO-1). Results showed that the influence of the view angle and view direction on reflectance was stronger with decreasing leaf area index (LAI) and chlorophyll concentration. Because of the greater dependence on the near-infrared reflectance, the EVI was much more sensitive to viewing geometry than NDVI presenting larger values in the backscattering direction. The contrary was observed for NDVI in the forward scattering direction. In relation to the LAI, NDVI was much more isotropic for closed soybean canopies than for incomplete canopies and a contrary behavior was verified for EVI.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Methodology for wind turbine blade geometry optimization

Nowadays, the upwind three bladed horizontal axis wind turbine is the leading player on the market. It has been found to be the best industrial compromise in the range of different turbine constructions. The current wind industry innovation is conducted in the development of individual turbine components. The blade constitutes 20-25% of the overall turbine budget. Its optimal operation in particular local economic and wind conditions is worth investigating. The blade geometry, namely the chord, twist and airfoil type distributions along the span, responds to the output measures of the blade performance. Therefore, the optimal wind blade geometry can improve the overall turbine performance. The objectives of the dissertation are focused on the development of a methodology and specific tool for the investigation of possible existing wind blade geometry adjustments. The novelty of the methodology presented in the thesis is the multiobjective perspective on wind blade geometry optimization, particularly taking simultaneously into account the local wind conditions and the issue of aerodynamic noise emissions. The presented optimization objective approach has not been investigated previously for the implementation in wind blade design. The possibilities to use different theories for the analysis and search procedures are investigated and sufficient arguments derived for the usage of proposed theories. The tool is used for the test optimization of a particular wind turbine blade. The sensitivity analysis shows the dependence of the outputs on the provided inputs, as well as its relative and absolute divergences and instabilities. The pros and cons of the proposed technique are seen from the practical implementation, which is documented in the results, analysis and conclusion sections.

Suomi "the Land of a Thousand Lakes": a short descriptive account of the Grand Duchy of Finland

Inneh. bl. a. en engelsk öfvers af Runebergs "Vårt land".

Two-phase flow measurements with spacer grid in a rod bundle geometry

Heat transfer effectiveness in nuclear rod bundles is of great importance to nuclear reactor safety and economics. An important design parameter is the Critical Heat Flux (CHF), which limits the transferred heat from the fuel to the coolant. The CHF is determined by flow behaviour, especially the turbulence created inside the fuel rod bundle. Adiabatic experiments can be used to characterize the flow behaviour separately from the heat transfer phenomena in diabatic flow. To enhance the turbulence, mixing vanes are attached to spacer grids, which hold the rods in place. The vanes either make the flow swirl around a single sub-channel or induce cross-mixing between adjacent sub-channels. In adiabatic two-phase conditions an important phenomenon that can be investigated is the effect of the spacer on canceling the lift force, which collects the small bubbles to the rod surfaces leading to decreased CHF in diabatic conditions and thus limits the reactor power. Computational Fluid Dynamics (CFD) can be used to simulate the flow numerically and to test how different spacer configurations affect the flow. Experimental data is needed to validate and verify the used CFD models. Especially the modeling of turbulence is challenging even for single-phase flow inside the complex sub-channel geometry. In two-phase flow other factors such as bubble dynamics further complicate the modeling. To investigate the spacer grid effect on two-phase flow, and to provide further experimental data for CFD validation, a series of experiments was run on an adiabatic sub-channel flow loop using a duct-type spacer grid with different configurations. Utilizing the wire-mesh sensor technology, the facility gives high resolution experimental data in both time and space. The experimental results indicate that the duct-type spacer grid is less effective in canceling the lift force effect than the egg-crate type spacer tested earlier.

Defining the keyhole modes – the effects on the weld geometry and the molten pool behaviour in high power laser welding of stainless steels

Keyhole welding, meaning that the laser beam forms a vapour cavity inside the steel, is one of the two types of laser welding processes and currently it is used in few industrial applications. Modern high power solid state lasers are becoming more used generally, but not all process fundamentals and phenomena of the process are well known and understanding of these helps to improve quality of final products. This study concentrates on the process fundamentals and the behaviour of the keyhole welding process by the means of real time high speed x-ray videography. One of the problem areas in laser welding has been mixing of the filler wire into the weld; the phenomena are explained and also one possible solution for this problem is presented in this study. The argument of this thesis is that the keyhole laser welding process has three keyhole modes that behave differently. These modes are trap, cylinder and kaleidoscope. Two of these have sub-modes, in which the keyhole behaves similarly but the molten pool changes behaviour and geometry of the resulting weld is different. X-ray videography was used to visualize the actual keyhole side view profile during the welding process. Several methods were applied to analyse and compile high speed x-ray video data to achieve a clearer image of the keyhole side view. Averaging was used to measure the keyhole side view outline, which was used to reconstruct a 3D-model of the actual keyhole. This 3D-model was taken as basis for calculation of the vapour volume inside of the keyhole for each laser parameter combination and joint geometry. Four different joint geometries were tested, partial penetration bead on plate and I-butt joint and full penetration bead on plate and I-butt joint. The comparison was performed with selected pairs and also compared all combinations together.