La Galite Archipelago (Tunisia, North Africa): stratigraphic and petrographic revision and insights for geodynamic evolution of the Maghrebian Chain

The location of the La Galite Archipelago on the Internal/External Zones of the Maghrebian Chain holds strong interest for the reconstruction of the geodynamic evolution of the Mesomediterranean Microplate-Africa Plate Boundary Zone. New stratigraphic and petrographic data on sedimentary successions intruded upon by plutonic rocks enabled a better definition of the palaeogeographic and palaeotectonic evolutionary model of the area during the early-middle Miocene. The lower Miocene sedimentary units (La Galite Flysch and Numidian-like Flysch) belong to the Mauritanian (internal) and Massylian (external) sub-Domains of the Maghrebian Chain, respectively. These deposits are related to a typical syn-orogenic deposition in the Maghrebian Flysch Basin Domain, successively backthrusted above the internal units. The backthrusting age is post-Burdigalian (probably Langhian-Serravallian) and the compressional phase represents the last stage in the building of the accretionary wedge of the Maghrebian orogen. These flysch units may be co-relatable to the similar well-known formations along the Maghrebian and Betic Chains. The emplacement of potassic peraluminous magmatism, caused local metamorphism in the Late Serravallian-Early Tortonian (14–10 Ma), after the last compressional phase (backthrusting), during an extensional tectonic event. This extensional phase is probably due to the opening of a slab break-off in the deep subduction system. La Galite Archipelago represents a portion of the Maghrebian Flysch Basin tectonically emplaced above the southern margin of the “Mesomediterranean Microplate” which separated the Piemontese-Ligurian Ocean from a southern oceanic branch of the Tethys (i.e. the Maghrebian Flysch Basin). The possible presence of an imbricate thrust system between La Galite Archipelago and northern Tunisia may be useful to exclude the petroleum exploration from the deformed sectors of the offshore area considered.

Brachiopod assemblages from the Early-Middle Jurassic transition in the Eastern Subbetic (SE Spain): Systematic and palaeobiogeographic implications and palaeoenvironmental significance

New data on brachiopod assemblages recorded in the Eastern Subbetic area (Alicante, SE Spain) and attributed to the Early Bajocian (Humphriesianum Zone and/or immediately older) are provided. Eleven species have been distinguished and reported for the first time in the Subbetic domain of the Betic Cordillera. The description of the morphological evidences on each analysed taxa, especially in relation to their internal morphology, brings new implications in the systematics of the Middle Jurassic brachiopods. The analysis of faunistic affinity between the recorded assemblages and those from other palaeogeographic domains, shows that the Subbetic brachiopod fauna has a clear Mediterranean affinity, as proved by the different species belonging to the genera Striirhynchia, Septocrurella, Mondegia?, Karadagithyris, Linguithyris, Papodina?, Viallithyris?, and Zugmayeria?. It is also evidenced that the Early-Middle Jurassic transition in the Eastern Subbetic accounted, in qualitative terms, a remarkable interval of faunistic renewal in the brachiopod assemblages, strongly influenced by a complex tectonic and stratigraphic framework controlled by a period of intense extensional tectonics, globally framed in the evolution of the Atlantic Ocean.

Biostratigraphy and paleobiogeographic affinities of the Jurassic brachiopod assemblages from Sierra Espuña (Maláguide Complex, Internal Betic Zones, Spain)

The assemblages of Early Jurassic brachiopods (Pliensbachian - Toarcian) from Sierra Espuña (Murcia Province, SE Spain) are described. This is the only area in the Internal Zones of the Betic Cordillera, corresponding to the margins of the Alborán Terrane, where Jurassic brachiopods are known to occur. In the tectonic Unit of Morrón de Totana (more southward located) assemblage MT1 of Late Pliensbachian age has been characterized. This assemblage has been subdivided into three successive sub-assemblages: MT1a (Algovianum Zone), MT1b (Emaciatum Zone, Solare Subzone) and MT1c (Emaciatum Zone, Elisa Subzone). Northward, in the Perona tectonic Unit two distinct assemblages, P1 (Latest Sinemurian - Early Pliensbachian) and P2 (Early Toarcian, Serpentinum Zone) have been recognized. Differences between the assemblages from the two tectonic units are evident after the paleobiogeographical analysis. In the Morrón de Totana Unit, taxa with Mediterranean affinities occur. MT1 assemblage is very similar to assemblages previously known in the Eastern Subbetic as well as in other areas of the Mediterranean Province. In the Perona Unit the Mediterranean affinity of the assemblages is not so evident. P1 Assemblage consists of widely distributed taxa, lacking in the most characteristic elements of the Mediterranean Province which, however, are present in neighbouring Betic areas. P2 Assemblage belongs to the Spanish Province that develops in Western Tethys after the Early Toarcian Mass Extinction Event. The occurrence in this assemblage of Prionorhynchia aff. msougari Rousselle, until now only found in North Africa, indicates a closer connection of the Perona Unit with the African paleomargin of the Tethys than with the South Iberian paleomargin. The paleobiogeographical data suggest a more southern and marginal (close to epicontinental areas) position of the Perona Unit than the Morrón de Totana Unit.

Updating the marine biostratigraphy of the Granada Basin (central Betic Cordillera). Insight for the Late Miocene palaeogeographic evolution of the Atlantic – Mediterranean seaway

The marine stratigraphic record of the Granada Basin (central Betic Cordillera, Spain) is composed of three Late Miocene genetic units deposited in different sea-level contexts (from base to top): Unit I (sea-level rise), Unit II (high sea-level), and Unit III (low sea-level). The latter mainly consists of evaporites precipitated in a shallow-basin setting. Biostratigraphic analyses based on planktonic foraminifera and calcareous nannoplankton indicate four late Tortonian bioevents (PF1-CN1, PF2, PF3, and PF4), which can be correlated with astronomically-dated events in other sections of the Mediterranean. PF1-CN1 (7.89 Ma) is characterized by the influx of the Globorotalia conomiozea group (including typical forms of Globorotalia mediterranea) and by the first common occurrence of Discoaster surculus; PF2 (7.84 Ma) is marked by the first common occurrence of Globorotalia suterae; PF3 (7.69 Ma) is typified by the influx of dextral Neogloboquadrina acostaensis; and PF4 (7.37 Ma) is defined by the influx of the Globorotalia menardii group II (dextral forms). The PF1 event occurred in the upper part of Unit I, whereas PF2 to PF4 events occurred successively within Unit II. The age of Unit III (evaporites) can only be estimated in its lower part based on the presence of dextral Globorotalia scitula, which, together with the absence of the first common occurrence of the G. conomiozea group (7.24 Ma), points to the latest Tortonian. Comparisons with data from the other Betic basins indicate that the evaporitic phase of the Granada Basin (7.37–7.24 Ma) is not synchronous with those from the Lorca Basin (7.80 Ma) and the Fortuna Basin (7.6 Ma). In the Bajo Segura Basin (easternmost Betic Cordillera), no evaporite deposition occurred during the late Tortonian. The evaporitic unit of the Granada Basin (central Betics) records the late Tortonian restriction of the Betic seaway (the marine connection between the Atlantic and Mediterranean). The diachrony in the restriction of the Betic seaway is related to differing tectonic movements in the central and eastern sectors of the Betic Cordillera.

Paleoenvironmental changes during the late Miocene (Messinian)–Pliocene transition (Bajo Segura Basin, southeastern Spain): sedimentological and ichnological evidence

A detailed sedimentological and paleontological analysis of the uppermost Miocene (Messinian)–Pliocene boundary at the northern border of the Bajo Segura Basin, southeastern Spain, was carried out in order to describe the evolution of the regional paleocoastline during the Pliocene reflooding of the Mediterranean immediately after the sea-level fall related to the Messinian Salinity Crisis. Multiple trace fossils typical of firm- and hardgrounds were recognized, allowing identification of Glossifungites (two different types), Entobia, and Gnathichnus ichnofacies. Trace-fossil analysis showed that lithology and media consistency exerted considerable control on the development of the different ichnocoenoses and that there was a clear decrease in hydrodynamic energy from a coastal to a shallow-water shelf environment related to progressive sea-level rise. Ichnological and sedimentological data provide evidence that the definitive flooding of the Mediterranean was rapid and synchronous throughout the northern margin of the Bajo Segura Basin. The following model for the Pliocene transgression in the study area is therefore proposed: (1) the marine ingression penetrated along the incised paleovalleys carved as a consequence of the fall in sea level, where the first two Pliocene systems were deposited (P0–P1); (2) during the maximum flooding surface of the transgression, the sea overflowed the margins of the paleovalleys and extended throughout the entire northern margin of the basin; and (3) the third Pliocene system was deposited, forming the lower part of a highstand systems tract (P2).

Nannoplankton and planktonic foraminifera biostratigraphy of the eastern Betics during the Tortonian (SE Spain)

El final del Serravalliense y principio del Tortoniense es un periodo de fuerte actividad tectónica en la Cordillera Bética. Además, existe un debate sobre la existencia de sedimentos de edad Tortoniense inferior al no existir claras atribuciones fósiles en esa edad. Estos sedimentos se asignan a dicha edad por criterios indirectos, tanto estratigráficos como por la ausencia de contenido fósil más antiguo o más reciente. En este trabajo se describe la sección compuesta de Les Moreres-Albatera, que es probablemente una de las secciones más completas de edad Tortoniense en la bibliografía de la Cordillera Bética, pese a tener un importante hiato de cerca de 1 Millón de años ligado a un evento tectónico intra-Tortoniense. La sección presenta dos unidades litológicas calizas a la base (El Castellà) y al techo (Las Ventanas) y dos unidades intermedias margosas, la inferior, llamada Les Moreres, y la superior, Galería de los Suizos se encuentran separadas por el conglomerado de la Raya del Búho. Se han identificado las biozonas de nanofósiles calcáreos CN5b/NN7 a CN9a/NN11a (Okada & Bukry, 1980; Martini, 1971) y de foraminíferos planctónicos de MMi9 a MMi12a (Lourens et al., 2004). La biostratigrafía de los primeros ha permitido identificar un hiato que incluye la parte alta de las biozonas CN7/NN9 hasta la parte baja de CN9a/NN11a (Okada & Bukry, 1980; Martini, 1971). La integración de los datos biostratigráficos con los paleomagnéticos en la sección Albatera permite la calibración del límite de los magnetocrones C4r.1r/C4n.2n.

Registro de excentricidad de alta frecuencia en los sedimentos continentales de la Cuenca de Guadix (Cordillera Bética, España)

Los sedimentos continentales (Plioceno-Cuaternario) que afloran en el sector central de la Cuenca de Guadix (Sur de España) muestran una ciclicidad de 100 ka consistente en la alternancia de depósitos de abanicos aluviales y sedimentos fluvio-lacustres. Durante el Plioceno y el Pleistoceno la Cuenca de Guadix era endorreica, y se caracterizaba por la existencia de un sistema axial fluvial y una orla marginal de abanicos aluviales transversales. En la zona de estudio, estos sistemas estaban relacionados lateralmente, ocupando de forma alterna el valle axial en el sector central de la Cuenca de Guadix. La edad estimada para la alternancia, ca. 100 ka, cae en la banda de excentricidad de alta frecuencia de Milankovitch. Estas fases podrían interpretarse como el resultado de máximos de excentricidad (inviernos más largos y fríos, con mayor volumen de precipitaciones que favorecerían las progradaciones de los abanicos) o de excentricidad mínima (períodos más secos y fríos, con una cubierta vegetal más escasa en las áreas fuente y, por tanto, un mayor aporte de sedimento por precipitaciones muy concentradas en el tiempo al sistema aluvial). Se muestra cómo los datos paleomagnéticos no son lo suficientemente precisos para proporcionar una buena correlación de las fases de progradación con la curva de excentricidad de Laskar et al. (2004), por lo que se pone en duda su precisión a la hora de determinar el significado climático de la ciclicidad.

Optimizing the number of stations in arrays measurements: experimental outcomes for different array geometries and the f-k method

Array measurements have become a valuable tool for site response characterization in a non-invasive way. The array design, i.e. size, geometry and number of stations, has a great influence in the quality of the obtained results. From the previous parameters, the number of available stations uses to be the main limitation for the field experiments, because of the economical and logistical constraints that it involves. Sometimes, from the initially planned array layout, carefully designed before the fieldwork campaign, one or more stations do not work properly, modifying the prearranged geometry. Whereas other times, there is not possible to set up the desired array layout, because of the lack of stations. Therefore, for a planned array layout, the number of operative stations and their arrangement in the array become a crucial point in the acquisition stage and subsequently in the dispersion curve estimation. In this paper we carry out an experimental work to analyze which is the minimum number of stations that would provide reliable dispersion curves for three prearranged array configurations (triangular, circular with central station and polygonal geometries). For the optimization study, we analyze together the theoretical array responses and the experimental dispersion curves obtained through the f-k method. In the case of the f-k method, we compare the dispersion curves obtained for the original or prearranged arrays with the ones obtained for the modified arrays, i.e. the dispersion curves obtained when a certain number of stations n is removed, each time, from the original layout of X geophones. The comparison is evaluated by means of a misfit function, which helps us to determine how constrained are the studied geometries by stations removing and which station or combination of stations affect more to the array capability when they are not available. All this information might be crucial to improve future array designs, determining when it is possible to optimize the number of arranged stations without losing the reliability of the obtained results.

Cambio de la línea de costa en el Bajo Segura (Sur de Alicante) en los últimos 15.000 años

En este trabajo se describe el cambio de la línea de costa en la parte sur de la provincia de Alicante para los últimos 15.000 años. Se ha obtenido integrando datos de diferentes fuentes y especialmente de perfiles sísmicos de alta resolución marinos de la plataforma continental anexa. Se han distinguido 10 periodos. Comienza con la transgresión marina tras la última glaciación, le sigue la formación del sinus ilicitanus entre los años 4000 y 3000 a. C., y finaliza con un lento proceso de desecación hasta la actualidad, reducido a las lagunas del Fondo y Salinas de Santa Pola.

Tectonic control on the sedimentary record of the central Moldavidian Basin (Eastern Carpathians, Romania)

The sedimentary record of the Tarcău and Vrancea Nappes, belonging to the flysch accretionary zone of the Eastern Carpathians (Eastern Carpathian Outer Flysch), registered Cretaceous-Miocene events during the evolution of the Moldavidian Basin. Our biostratigraphic data indicate that the deposits studied are younger than previously reported. The comparison of sedimentary record studied with the Late Cretaceous-Early Miocene global eustatic curve indicates that eustatic factor played a secondary role, after the tectonic one. Four main stages of different processes influenced by tectonics are recognized in the sedimentary record: (1) Campanian-Maastrichtian-earliest Paleocene; (2) latest Ypresian-Lutetian; (3) late Chattian-earliest Aquitanian, and (4) late Aquitanian-early Burdigalian. The late Chattian- earliest Aquitanian and late Aquitanian-early Burdigalian records indicate a high tectonic influence. The first event was related to the foredeep stage of the sedimentary domain studied, and the second one to the deformation stage of the same domain. The sedimentary records of tectonic influence recognized during these stages are useful tools for geodynamic reconstructions. The stratigraphic correlation of Tarcău and Vrancea sedimentary records are used

El sector nororiental de la Cuenca de Antepaís del Guadalquivir (Cordillera Bética, Mioceno Superior): estratigrafía, cronología y evolución sedimentaria

Estudios estratigráficos y sedimentológicos de afloramiento y el análisis paleoecológico y bioestratigráfico mediante foraminíferos, han permitido realizar una reinterpretación sedimentaria de las unidades de margas y areniscas miocenas del sector nororiental de la Cuenca del Guadalquivir. El relleno sedimentario ha sido dividido en cuatro unidades litoestratigráficas (I-IV), todas ellas depositadas durante el Tortoniense, entre 10 y 7.89 Ma, aproximadamente. La Unidad I (Tortoniense antiguo no basal) está fomada por arenas y calizas de algas, y es interpretada como una unidad transgresiva y expansiva sobre el basamento que evoluciona desde ambientes marinos someros a rampa de carbonatos tipo rhodalgal. La Unidad II (Tortoniense inferior, biozona MMi11: entre 10 y 9.54 Ma) está caracterizada por una alternancia rítmica de margas arcillosas y silíceas, depositadas en ambientes pelágicos y profundos de aguas frías-eutróficas, si bien con repetidos cambios en la estratificación y distribución de nutrientes en la columna de agua. Esta unidad registra una importante somerización en su parte superior, dando paso gradual a la Unidad III. La Unidad III (Tortoniense inferior, biozonaMMi11: desde 9.54 Ma) está dominada por areniscas, aunque lateralmente aparecen brechas intraformacionales con estratos contorsionados. Está nutrida por deltas desde la costa y se interpreta como el depósito de bancos arenosos movilizados por la acción de corrientes mareales y el oleaje de tormentas en rampas. La Unidad IV (Tortoniense superior, biozona MMi12: desde 8.35 Ma) está representada por margas pelágicas similares a las de la Unidad II, de la que difiere por la presencia de intercalaciones arenosas genéticamente relacionadas con procesos mareales y de tormentas.

La Plataforma Triásica Alpujárride (Zonas Internas de la Cordillera Bética, España)

A partir de estudios estratigráficos, centrados en la sucesión triásica alpujárride de la Sierra de Gádor (Almería, Cordillera Bética) y su correlación con otros sectores, proponemos una columna estratigráfica sintética para la Plataforma Triásica Alpujárride. Esta columna estaría dividida en dos formaciones: una metasiliciclástica basal (subdividida en tres miembros: inferior, intermedio y superior) y una metacarbonática suprayacente (subdivididida en seis miembros, numerados del 1 al 6 de muro a techo). Esta plataforma habría sufrido una evolución morfológica en tres fases: Fase 1 de rampa homoclinal (Anisiense-Ladiniense); Fase 2 de plataforma fallada (Ladiniense-Carniense); y Fase 3 de plataforma orlada (Noriense). Además, a partir del análisis sedimentario de las asociaciones de facies reconocidas en la sucesión triásica de la Sierra de Gádor proponemos su división en cuatro secuencias deposicionales para el intervalo comprendido entre el Anisiense y el Noriense. La primera secuencia comprendería los miembros inferior e intermedio de la formación metasiliciclástica; la segunda secuencia deposicional incluiría el miembro superior de la formación metasiliciclástica y los miembros 1 y 2 de la formación metacarbonática; la tercera secuencia constaría de los miembros 3 y 4, mientras que la cuarta secuencia estaría constituida por los miembros 5 y 6.

Rediscovery of the Moratalla amber (Murcia, Spain): a Cretaceous outcrop in the southernmost end of the peninsular amber strip

This study is a contribution of the Spanish Ministry of Economy and Competitiveness project CGL2011-23948/BTE.

Modelo geológico 3D del NO de la Cuenca del Bajo Segura (Alicante, SE de España)

Se ha realizado un modelo geológico en 3D de la porción NO de la Cuenca del Bajo Segura, por ser esta la que mostraba una menor complicación geológica. La cuenca se ha dividido en 7 sintemas (nombrados Ab,M1, M2, P1, P2, Pc y Q) y se ha utilizado como base de la cuenca el techo de la Formación Calizas de Las Ventanas (Ve). La construcción del modelo 3D permite un mejor conocimiento geológico de la cuenca. El modelo apunta a una mayor complicación tectónica de lo supuesto en un principio.

Formación y desecación del sinus ilicitanus (Sur de Alicante) en los últimos 15.000 años

En este trabajo se describe el cambio de la línea de costa en la parte sur de la provincia de Alicante para los últimos 15.000 años. Se ha obtenido integrando datos de diferentes fuentes y especialmente de perfiles sísmicos de alta resolución marinos de la plataforma continental anexa. Se han distinguido 10 periodos. Comienza con la transgresión marina tras la última glaciación, le sigue la formación del sinus ilicitanus entre los años 4.000 y 3.000 AC, y finaliza con un lento proceso de desecación hasta la actualidad, reducido a las lagunas del Fondo y Salinas de Santa Pola.