Metric Training for the Transportation Industry Module III - Road and Bridge Design, HR-376

"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 3 - Road and Bridge Design. This module provides hands on examples of how to use metric measurements in the design of roads and structures.

Metric Training for the Transportation Industry Module IV - Transportation Planning and Traffic Monitoring, HR-376

"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 4 - Transportation Planning and Traffic Monitoring. Hands on examples of applications of metric measurements in the development of planning reports and traffic data collection are included in this module.

Metric Training for the Transportation Industry Module V - Motor Vehicle Licensing and Enforcement, HR-376

"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 5 - Motor Vehicle Enforcement. Examples from Iowa and Federal Motor Vehicle Codes are used as examples for hands on training for the vehicle enforcement type personnel using this module.

Future trends of the World Wide Web in the food and beverage sector in Spain

Extended abstract.

Genetic variability of marine shrimp in the Brazilian industry

The objective of this work was to estimate the genetic variability level and distribution in Brazilian broodstocks of marine shrimp (Litopenaeus vannamei). Nine of the country's largest hatcheries were evaluated using codominant and highly polymorphic microsatellite markers. The results obtained from genotyping of ten microsatellite loci are indicative of genetic variability that is compatible with that found in wild populations of L. vannamei in Mexico and Central America. A possible explanation is the highly diversified and relatively recent origin of the available broodstocks. Bayesian analysis detected a signal for five founding populations. The distribution of genetic distances partially reflects geographical location, and this information will be useful for the creation of new broodstocks. Therefore, L. vannamei genetic variability among nine of the largest national hatcheries can be considered high.

Acute pulmonary toxicity following occupational exposure to a floor stain protector in the building industry in Switzerland.

BACKGROUND: Waterproofing agents are widely applied to leather and textile garments; they are also used as floor stain protectors by professionals. Acute respiratory injury is described in three cases of young healthy adults following occupational inhalation of a new waterproofing formulation containing an acrylate fluoropolymer. Within 1 or 2 h after exposure they developed a rapidly progressive dyspnoea; two of them had hypoxaemia and flu-like reactions. All patients improved with supportive treatment in a few days. The mechanism of toxicity is still under investigation, but experimental data suggest the role of this new acrylate fluoropolymer. CONCLUSION: Tilers should be warned against spraying floor stain repellents; there is also a need to make consumers aware that the spraying of waterproofing agents in a closed environment and concomitant smoking should be avoided.

Managing an intellectual property right portfolio in the software industry

Tutkimuksen tavoitteena oli määrittää etuja, joita huolellinen immateriaali-oikeussalkun hallinnointi ohjelmistoalalla luo yritykselle. Tutkimusaineisto on kerätty haastattelemalla eri asemissa olevia ihmisiä kolmesta suomalaisesta ohjelmistoalan tuote- ja palveluyrityksestä. Tutkimuksesta käy ilmi, että ohjelmistoyritysten immateriaalioikeussalkut koostuvat liikesalaisuuksista, tekijänoikeudesta, tavaramerkeistä, verkkotunnuksista ja muutamista patenteista. Kiinnostus patentteihin ohjelmistoalalla on kasvanut erityisesti niiden tuoman tekijänoikeutta vahvemman suojan takia. Tällä hetkellä Euroopassa suhtautuminen ohjelmistopatentteihin on kuitenkin vielä käymistilassa. Jos ohjelmistopatentit hyväksytään, immateriaalioikeussalkun strateginen merkitys kasvaa. Tällöin salkunn hallinnointi tukee yrityksen tavoitteita - esimerkiksi oman toimintavapauden turvaamista - avustaen hakemus-prosessissa, tarkkaillen markkinoita sekä arvioiden yrityksen oman immateriaalioikeussalkun erilaisia hyväksikäyttömahdollisuuksia.

Entry Strategy Issues in the Ophthalmic Industry: Entry Mode, Pricing and Distribution

Maahantulostrategia asettaa yrityksen kansainvälisiä liiketoimintoja ohjaavat tavoitteet, päämäärät, resurssit ja toiminnan suuntaviivat. Tämä diplomityö käsittelee yrityksen maahantulostrategian elementeistä operaatiomuodon valintaa, hinnoittelua ja jakelua. Työssä rakennetaan teoriakehys elementteihin liittyvien päätösten tutkimiseksi lääketeollisuuden ominaispiirteet huomioiden. Lääketeollisuudella on muihin teollisuudenaloihin verrattuna useita erityispiirteitä, joihin työ perehdyttää. Lisäksi työn olennainen osa on selvittää lääketeollisuuden maakohtaisia säädöksiä ja toimintamalleja. Diplomityö on tehty silmäläkkeitä valmistavalle, kehittävälle ja markkinoivalle Santen Oy:lle, joka suunnittelee toimintansa laajentamista Keski- ja Etelä-Euroopan markkinoille. Tässä laajentumisprosessissa ensimmäisenä kohdemaana on Saksa, jonka markkinoille suuntautuvia toimenpiteitä työ tutkii. Teoriakehyksen, markkinoiden ominaispiirteiden sekä useiden erilaisten analyysien pohjalta työn tavoitteena on antaa operaatiomuotoa, tuotteiden hinnoittelua ja jakelua koskevia suosituksia.

The development of an information infrastructure for cost estimating in the automotive industry

Työn tavoitteena on luoda yleinen informaatioinfrastruktuuri autoteollisuuden valmistuskustannusten arviointiin. Nykyään tämä kustannusarviointi on laajassa käytössä oleva menetelmä. Se mahdollistaa tuotekustannusten hallitsemisen, mikä lisää autovalmistajien kilpailukykyä. Kustannusarvioinnissa tarvitaan laadukasta tietoa, mutta suoritetussa tutkimuksessa paljastui, että useat seikat haittaavat tätä arviointia. Erityisesti resurssien vähyys, tiedonhankinta ja tiedon luotettavuuden varmentaminen aiheuttavat ongelmia. Nämä seikat ovat johtaneet kokemusperäisen asiantuntemuksen laajaan käyttöön, minkä johdosta erityisesti kokemattomilla kustannusarvioijilla on vaikeuksia ymmärtää kustannusarvioiden tietovaatimuksia. Tämän johdosta tutkimus tuo esiin kokeneiden kustannusarvioijien käyttämiä tietoja ja tietolähteitä päämääränä lisätä kustannusarvioiden ymmärtämistä. Informaatioinfrastruktuuri, joka sisältää tarvittavan tiedon järkevien ja luotettavien kustannusarvioiden luontiin, perustuu tutkimuksen tuloksiin. Infrastruktuuri määrittelee tarvittavan kustannustiedon ja niiden mahdolliset tietolähteet. Lisäksi se selvittää miksi tieto on tarpeellista ja miten tiedon oikeellisuus pitäisi varmentaa. Infrastruktuuria käytetään yhdessä yleisen kustannusarvioprosessimallin kanssa. Tämä integrointi johtaa tarkempiin ja selkeämpiin kustannusarvioihin autoteollisuudessa.

Effects of mergers and acquisitions in the paper industry

Paperiteollisuus on ollut perinteisesti fragmentoitunut toimiala, mutta viime vuosikymmenen aikana konsolidoitumisprosessi on kiihtynyt. Yrityskaupat ja fuusiot ovat muuttaneet paperiteollisuuden markkinarakennetta merkittävästi. Työn tavoitteena oli tutkia yleisesti markkinarakenteen vaikutusta liiketoiminnan tuloksiin sekä analysoida yrityskauppojen ja fuusioiden syitä, tuloksia ja rajoituksia. Tavoitteena oli myös tutkia paperiteollisuuden konsolidoitumisen vaikutuksia hintakehitykseen, hintaheilahteluihin ja kannattavuuteen. Keskeisenä syynä konsolidoitumiskehitykselle voidaan pitää uusien paperikoneiden huomattavaa investointikustannusten kasvua. Toinen tärkeä tekijä yhdentymiskehitykselle on se, että paperiteollisuus on saavuttanut elinkaaren kypsyysvaiheen Euroopassa, Pohjois-Amerikassa ja Japanissa. Yrityskauppojen ja fuusioiden motiiveja paperiteollisuudessa ovat mm. kasvu kypsillä markkinoilla, tarve parantaa taloudellista tulosta, mahdollisuus toimia globaalisti ja hyödyntää siitä saatavat edut tai mahdollisuus parempaan arvoketjun hallintaan. Näyttää siltä, että suurempien paperiteollisuusyritysten kannattavuus ei ole parempi kuin pienemmillä yrityksillä. Lisäksi useimmissa paperiteollisuuden yrityskaupoissa ja fuusioissa näyttäisi ostavan osapuolen kurssikehitys ilmoitusta seuraavana päivänä olevan negatiivinen.

eBusiness Adoption in Metalforming SMEs in the Automotive Industry

Competition in the automotive industry has led the participants trying to find new ways of reducing costs, increasing efficiency and improve responsiveness to gain competitive advantage. It is not anymore single companies competing against each others, it is the whole supply chains competing. This has already earlier led the big multinational companies to gain benefits by using electronic means of doing business (eBusiness). Lower down the chain the smaller companies have not yet taken advantage of the potential benefits of eBusiness methods. Therefore, the full benefits from eBusiness methods have yet to be discovered. The aim of the Thesis is to find ways of taking advantage of eBusiness methods with their limited resources. Because small and medium sized enterprises (SME) many times lack of eBusiness knowledge this project also aims to clarify the idea of eBusiness, present the potential possibilities and benefits from eBusiness and the requirements needed to achieve them. The Thesis presents information of eBusines especially in the automotive industry. Together with this information and the information acquired from the case study company a simple route map is developed which SMEs can use gain competitive advantage by eBusiness methods.

Market Orientation in Rapidly Internationalizing Small Companies — Evidence from the Software Industry

For more than a decade, researchers have been aware of the increased pace of small-firm internationalization and the greater effect of these rapidly growing small businesses on the wealth, international trade, and job-creation opportunities of countries. Due to the small size of the home market, Finnish companies have been generally considered highly interested in internationalization. One particular domain in which rapid internationalization has been considered feasible is the global software business, with its knowledge-intensive nature and high growth potential. However, over time the failure rate of small entrepreneurial firms has remained especially high in high-technology markets. One of the reasons for this seems to lie in the fact that these companies are often formed by people with a strong technological background but limited competences in other areas. Further, research on the marketing capabilities of rapidly internationalizing high-tech firms has been scarce thus far. In addition, while there is much research on the first years of operations of rapidly internationalizing companies, it is not well known what becomes of them later on. Therefore, there is a need for more investigation into the managerial mindset, competences and decision-making in these small companies, especially from the perspective of how they acquire and exploit market knowledge, and enhance their networking capabilities in order to promote international expansion. The present study focuses on market orientation in small software firms that internationalize their operations rapidly in global software markets. It builds on qualitative data to illustrate how these companies develop their market-oriented product-market strategies during the process of increasing international commitment. It also shows how they manage their network relationships in order to be able to offer better customer service and to thrive in the fierce global competition. The study was conducted in the empirical context of Finnish small software companies, and the main data consists of interviews with top managers in these businesses. The interviews were designed to cover a minimum period of five years of the company's international operations, thus offering a retrospective in-depth perspective on market orientation, internationalization and partnerships in the given context. One particular focus is on less successfully internationalized software companies, and the challenges they face when approaching international markets. This study makes a significant contribution to the literature on market orientation for several reasons. First, building on data from the software industry, it clarifies the existing theory in the context of rapid internationalization and network relationships. Secondly, it provides a good body of evidence on market orientation in both successfully and less successfully internationalized companies, and identifies the key related differences between the two company groups. Thirdly, it highlights the importance of inter-firm networks in the rapid internationalization of small software firms, providing companies with important market knowledge and, in some cases, management challenges. Fourthly, this investigation clarifies market orientation in the context of different software-product strategies, thus, combining the perspectives of market orientation in both manufacturing and services. In sum, the results of the study are significant for both small software firms and public-policy makers since they shed light on the market-oriented managerial mindset and the market-information gathering and sharing processes that are needed in successful rapid internationalization.

Present standards and future perspectives in the treatment of metastatic non-small cell lung cancer.

The development of novel effective immunotherapeutic agents and early clinical data hinting at significant activity in non-small cell lung cancer (NSCLC) has introduced yet another player in the field of management of advanced disease. At present, first-line cytotoxic chemotherapy is generally withheld pending results of molecular testing for any actionable genetic alteration that could lead to targeted treatment, and in their absence chemotherapy is prescribed as a default therapy. Phase III trials comparing head-to-head immune checkpoint inhibitors with standard platinum-based doublet chemotherapy are underway. Second-line chemotherapy is likewise being challenged in phase III trials, one of which having recently reported positive results in advanced squamous cell carcinoma. In tumors harboring actionable transforming genetic alterations such as EGFR mutations and ALK rearrangements, second- and third-generation inhibitors allow for multiple lines of targeted treatment beyond initial resistance, postponing the use of cytotoxic chemotherapy to very late lines of therapy. Chemotherapy as a longstanding but still present standard of care capable of prolonging survival, improving quality of life, and relieving symptoms sees its role increasingly restricted to clinical, immunological, and molecular subsets of patients where its activity and efficacy have never been tested prospectively.

Salt, blood pressure and cardiovascular risk : what is the most adequate preventive strategy? A Swiss perspective

Among the various strategies to reduce the incidence of non-communicable diseases reduction of sodium intake in the general population has been recognized as one of the most cost-effective means because of its potential impact on the development of hypertension and cardiovascular diseases. Yet, this strategic health recommendation of the WHO and many other international organizations is far from being universally accepted. Indeed, there are still several unresolved scientific and epidemiological questions that maintain an ongoing debate. Thus what is the adequate low level of sodium intake to recommend to the general population and whether national strategies should be oriented to the overall population or only to higher risk fractions of the population such as salt-sensitive patients are still discussed. In this paper, we shall review the recent results of the literature regarding salt, blood pressure and cardiovascular risk and we present the recommendations recently proposed by a group of experts of Switzerland. The propositions of the participating medical societies are to encourage national health authorities to continue their discussion with the food industry in order to reduce the sodium intake of food products with a target of mean salt intake of 5-6 grams per day in the population. Moreover, all initiatives to increase the information on the effect of salt on health and on the salt content of food are supported.

Building legitimacy by criticising the pharmaceutical industry: a qualitative study among prescribers and local opinion leaders.

PRINCIPLES: The literature has described opinion leaders not only as marketing tools of the pharmaceutical industry, but also as educators promoting good clinical practice. This qualitative study addresses the distinction between the opinion-leader-as-marketing-tool and the opinion-leader-as-educator, as it is revealed in the discourses of physicians and experts, focusing on the prescription of antidepressants. We explore the relational dynamic between physicians, opinion leaders and the pharmaceutical industry in an area of French-speaking Switzerland. METHODS: Qualitative content analysis of 24 semistructured interviews with physicians and local experts in psychopharmacology, complemented by direct observation of educational events led by the experts, which were all sponsored by various pharmaceutical companies. RESULTS: Both physicians and experts were critical of the pharmaceutical industry and its use of opinion leaders. Local experts, in contrast, were perceived by the physicians as critical of the industry and, therefore, as a legitimate source of information. Local experts did not consider themselves opinion leaders and argued that they remained intellectually independent from the industry. Field observations confirmed that local experts criticised the industry at continuing medical education events. CONCLUSIONS: Local experts were vocal critics of the industry, which nevertheless sponsor their continuing education. This critical attitude enhanced their credibility in the eyes of the prescribing physicians. We discuss how the experts, despite their critical attitude, might still be beneficial to the industry's interests.