Determinants and Implications of Self-perceived Authenticity: Beliefs About Authenticity and Reactions to Behavioral Incongruence

Although many perspectives suggest that authenticity is important for well-being, people do not always have direct access to the psychological processes that produce their behaviors and, thus, are not able to judge whether they are behaving consistently with their personality, attitudes, values, motives, and goals. Even so, people experience subjective feelings of authenticity and inauthenticity, raising the question of factors that influence people’s judgments of whether they are being authentic. The present studies used descriptive, correlational, experimental, and experience sampling designs to examine possible influences on self-judgments of authenticity, including the congruence between people’s behavior and inner dispositions, the positivity of the behavior, their personal beliefs about authenticity, features of the interaction, and trait authenticity. Studies 1A and 1B examined the role of people’s beliefs about authenticity in self-judgments of authenticity. Studies 2A and 2B investigated the criteria that people use to judge their behavior as authentic versus inauthentic and challenged those criteria to see whether self-perceived authenticity was affected. And, Study 3 used an experience sampling design to study people’s experiences of state authenticity in daily life. Together the studies offer insights into the determinants of self-perceived authenticity and show that many factors that influence people’s feelings of authenticity are peripheral, if not irrelevant, to actual authenticity.

(Table 1) Composition of interstitial waters from ODP Leg 125 sites

Pore waters were collected from nine sites during Leg 125 of the Ocean Drilling Program (ODP). The first four sites (778-781) were drilled in the Mariana forearc on and near Conical Seamount, an active serpentine "mud volcano" located about 80 km behind the trench axis and 120 km in front of the active island arc. The last five sites (782-786) were drilled in the Izu-Bonin forearc between the trench and the outer arc high. Pore waters from the five sites from both areas that penetrated serpentine silts (Sites 778,779,780,783, and 784) are discussed in detail by Mottl (this volume). Here we report analyses of the pore waters from all nine sites for Li, Rb, Sr, Ba, Mn, B, and the sulfur isotopic ratio of dissolved sulfate. Sampling methods and results of analyses for major and minor species determined aboard ship were presented by Fryer, Pearce, Stokking, et al. (1990, doi:10.2973/odp.proc.ir.125.1990).

Mindfulness: Why (Not)? Explaining Variations in Mindfulness Levels

Despite the apparent benefits of being mindful, people are often not very mindful. There seem to be forces that drive people toward as well as away from mindfulness. These forces are conceptualised in terms of a competition for scarce attentional capacity. To explore these forces and to test this framework, an experience sampling study among people with an explicit intention to be mindful and an ongoing practice to that end (29 participants, 1012 measurements) was done to examine the antecedents of mindfulness in their daily lives. The results generally support the framework. People tend to be more mindful if the intention to be mindful is salient, and if they feel good. They tend to be less mindful when they are in a hurry, experiencing threat, tired, or very busy. A conscious intention to be mindful seems to be very important, and its development may be a key ingredient in the development of mindfulness.

De Rol van Sekse in de Relatie tussen Sociale Stress, Fysieke Activiteit en Negatief Affect bij Adolescenten

Diverse onderzoeken bij adolescenten tonen, met name bij meisjes, een verband aan tussen sociale stress, fysieke activiteit en negatief affect en het ontwikkelen van depressie. Jongeren kunnen tijdens de adolescentiefase meer negatief affect ervaren als gevolg van te veel sociale stress en te weinig fysieke activiteit. In dit onderzoek is specifiek gekeken naar het verband tussen sociale stress en negatief affect en naar het verband tussen fysieke activiteit en negatief affect en naar de rol van sekse in deze verbanden. De data zijn verzameld middels de Experience Sampling Methode (ESM); via een applicatie op de smartphone vulden 33 adolescenten tussen de 12 en 18 jaar gedurende vijf dagen (drie weekdagen en twee weekenddagen) op 10 willekeurige tijdstippen per dag vragenlijsten in met betrekking tot sociale stress, fysieke activiteit en negatief affect. Multilevel regressie analyse toont aan dat er een significant positief verband is tussen sociale stress en negatief affect en dat sekse dit verband niet modereert. In dit onderzoek wordt geen relatie aangetoond tussen fysieke activiteit en negatief affect. Vervolgonderzoek naar determinanten van sociale stress, fysieke activiteit en de rol van sekse is nodig om meer inzicht te krijgen in risico- en protectieve factoren ten aanzien van het ontwikkelen van depressie.

Fungi spores dimension matters in health effects: a methodology for more detail fungi exposure assessment

Health effects resulting from dust inhalation in occupational environments may be more strongly associated with specific microbial components, such as fungi, than to the particles. The aim of the present study is to characterize the occupational exposure to the fungal burden in four different occupational settings (two feed industries, one poultry and one waste sorting industry), presenting results from two air sampling methods – the impinger collector and the use of filters. In addition, the equipment used for the filter sampling method allowed a more accurate characterization regarding the dimension of the collected fungal particles (less than 2.5 μm size). Air samples of 300L were collected using the impinger Coriolis μ air sampler. Simultaneously, the aerosol monitor (DustTrak II model 8532, TSI®) allowed assessing viable microbiological material below the 2.5 μm size. After sampling, filters were immersed in 300 mL of sterilized distilled water and agitated for 30 min at 100 rpm. 150 μl from the sterilized distilled water were subsequently spread onto malt extract agar (2%) with chloramphenicol (0.05 g/L). All plates were incubated at 27.5 ºC during 5–7 days. With the impinger method, the fungal load ranged from 0 to 413 CFU.m-3 and with the filter method, ranged from 0 to 64 CFU.m-3. In one feed industry, Penicillium genus was the most frequently found genus (66.7%) using the impinger method and three more fungi species/genera/complex were found. The filter assay allowed the detection of only two species/genera/complex in the same industry. In the other feed industry, Cladosporium sp. was the most found (33.3%) with impinger method and three more species/genera/complex were also found. Through the filter assay four fungi species/genera/complex were found. In the assessed poultry, Rhyzopus sp. was the most frequently detected (61.2%) and more three species/genera/complex were isolated. Through the filter assay, only two fungal species/genera/complex were found. In the waste sorting industry Penicillium sp. was the most prevalent (73.6%) with the impinger method, being isolated two more different fungi species/genera/complex. Through the filter assay only Penicillium sp. was found. A more precise determination of occupational fungal exposure was ensured, since it was possible to obtain information regarding not only the characterization of fungal contamination (impinger method), but also the size of dust particles, and viable fungal particles, that can reach the worker ́s respiratory tract (filters method). Both methods should be used in parallel to enrich discussion regarding potential health effects of occupational exposure to fungi.

Site n°5. The Pertuis Breton (Bay of Biscay) France

1.This report presents the results of a field study conducted in the ECASA test site nOS in the Pertuis Breton, France. The site is located on the Atlantic West coasts. It is open to the bay of Biscay, but is slightly protected against westerly winds. The bay has been exploited by intertidal mussels culture for centuries. 2. Within the bay, mussels (Mytilus edulis) are cultivated either by the traditional pole technique, around the bay or on longlines in the centre of the bay. The area occupied by these longline s represents 250 ha, and the resulting annual production is 1 000 tonnes of mussels. The average depth at mid tide is of 13.8 m. The sediment is sandy, with a small fraction of mud. 3. The site is subject to several regular monitoring through the local implementation of national networks aiming at protecting the environment and marine resources, on pollutants (RNO), microbiological quality of the waters (REMI), phytoplanktonic toxic species (REPHY) and growth and mortality of molluscs (REMORA). Benthic macrofauna was studied in 1976. 4. Five sampling sations were chosen along a line, starting under the longlines, and at distances of 50, 100, 200, and 400 metres from the area cultivated. A reference station was chosen in a different direction at 2300 metres of the cultivated area. Sampling methods are described in the text. _Sediments were sampled for different analyses: grain size, content in organic matter, total organic carbon and nitrogen, and phytic pigments (chlorophyll a and phaeopigments). Redox were measured in cores. The macrofauna living into the sediment was also sampled. The water column was sampled for physical (temperature, transparency) and chemical parametres, including oxygen content, salinity, organic matter, dissolved nitrogen forms, phosphates and silicates. Results from benthic macrofauna surveys indicate that there were no significant differences between the different stations and the reference station, all being classified as slightly disturbed. The bay is submitted to freshwater runoffs from two adjacent rivers. 7. The sediment is slightly modified by the culture of bivalves. Total organic carbon, total nitrogen, Eh values and pheopigments were significantly higher under the trestles than in any other stations. Other stations often did not differ from the reference station. 8. The effects of shellfish culture on the water column were. However, it was observed a small decrease of the food available to the molluscs near the rearing 9. The DEB model was able to describe and predict adequately the growth of oysters, both in the Baie des Veys and in the Loch Creran. The parametres for its use in other environment are given, but a tuning of one parametre should be performed with the help of authors. 10. Among the indicators and models for use in are as of intertidal bivalve culture, it is recommended to use the sediment quality index, TOC (Total Organic Carbon), redox and pheopigments, in surficial sediment, AMBI for the macrofauna, chlorophyll a contents and nitrogen forms in the water column, and models describing the carrying capacity, filtration rate of molluscs, and a DEB model to predict the growth of molluscs.

Lanbide heziketako irakasleen prestakuntza konpetentziak garatzeko metodologietan: Ikaskuntza Agertoki Berriak esperientziaren azterketa

[EU]XX. mendearen azken bi hamarkadetatik hona jendartean gertatu diren aldaketek, Lanbide Heziketaren (lan merkatura bideratzeko langileen prestakuntza oinarri duen heziketaren epe gisara ulertuta) planteamendua birpentsatu beharra ekarri dute. Dinamikoa eta aldakorra den jendarte honetan, Lanbide Heziketari bere hezkuntza jardueraren gaineko gogoeta egin beharra suertatu zaio, eta baita zer eta nola irakatsi lanbidea garatzea helburu duten ikasleei bezalako galderei erantzuna eman ere. Ingurumari honetan konpetentzia kontzeptua eta haren inguruko esperientziak eta metodoak garatu dira hala nazioartean nola Euskal Herrian. Master Bukaerako lan honetan Lanbide Heziketan aurrera eraman den irakasleen etengabeko prestakuntza programa baten azterketa egin dugu. Horretarako, berrikuntza eta kalitatea sustatzeko zeregina duen Tknika zentroak zuzendu eta gidatutako Ikaskuntza Agertoki Berriak prestakuntza programan parte hartu duen Tolosaldeko Lanbide Institutua aukeratu dugu, kasu azterketaren ikuspegia erabiliz. Azken xedea, laburki, irakasleei konpetentzietan oinarritutako ikaskuntza aukera didaktikoak eskaini eta haiei buruzko gogoeta egitea da, gero praktikara eraman ditzaten. Gure ikerlanaren helburua, berriz, programa horren asmoak praktikan nola ebazten eta gauzatzen diren ikustea da, prozesuan engaiatuta dauden pertsonen bizipenetatik abiatuta. Hurbilketa kualitatibo eta interpretatibo honetatik lau irakasle elkarrizketatu ditugu eta haien igurikapen, kezka eta bestelakoak jasotzen saiatu gara. Ondorio nagusienak, honakoak: (i) konpetentzien bidezko irakaskuntza-ikaskuntzaren potentziala oso nabarmena dela ikusten dutela elkarrizketatuek, (ii) gogo eta motibazio handia dutela, (iii), ikastetxean, euren egunerokoan, zailtasun eta oztopo andana topatzen dutela, (iv) zailtasunak kasu batzuetan metodologia berari dagozkion arren beste askotan ikasleak eurek ez dutela aldaketarako borondate handirik atzematen da.

NITROUS OXIDE EMISSIONS IN COVER CROP-BASED CORN PRODUCTION SYSTEMS

Nitrous oxide (N2O) is a potent greenhouse gas; the majority of N2O emissions are the result of agricultural management, particularly the application of N fertilizers to soils. The relationship of N2O emissions to varying sources of N (manures, mineral fertilizers, and cover crops) has not been well-evaluated. Here we discussed a novel methodology for estimating precipitation-induced pulses of N2O using flux measurements; results indicated that short-term intensive time-series sampling methods can adequately describe the magnitude of these pulses. We also evaluated the annual N2O emissions from corn-cover crop (Zea mays; cereal rye [Secale cereale], hairy vetch [Vicia villosa], or biculture) production systems when fertilized with multiple rates of subsurface banded poultry litter, as compared with tillage incorporation or mineral fertilizer. N2O emissions increased exponentially with total N rate; tillage decreased emissions following cover crops with legume components, while the effect of mineral fertilizer was mixed across cover crops.

Estimating abundance and spatial distribution patterns of the bubble crab Dotilla fenestrata (Crustacea : Brachyura)

The bubble crab Dotilla fenestrata forms very dense populations on the sand flats of the eastern coast of Inhaca Island, Mozambique, making it an interesting biological model to examine spatial distribution patterns and test the relative efficiency of common sampling methods. Due to its apparent ecological importance within the sandy intertidal community, understanding the factors ruling the dynamics of Dotilla populations is also a key issue. In this study, different techniques of estimating crab density are described, and the trends of spatial distribution of the different population categories are shown. The studied populations are arranged in discrete patches located at the well-drained crests of nearly parallel mega sand ripples. For a given sample size, there was an obvious gain in precision by using a stratified random sampling technique, considering discrete patches as strata, compared to the simple random design. Density average and variance differed considerably among patches since juveniles and ovigerous females were found clumped, with higher densities at the lower and upper shore levels, respectively. Burrow counting was found to be an adequate method for large-scale sampling, although consistently underestimating actual crab density by nearly half. Regression analyses suggested that crabs smaller than 2.9 mm carapace width tend to be undetected in visual burrow counts. A visual survey of sampling plots over several patches of a large Dotilla population showed that crab density varied in an interesting oscillating pattern, apparently following the topography of the sand flat. Patches extending to the lower shore contained higher densities than those mostly covering the higher shore. Within-patch density variability also pointed to the same trend, but the density increment towards the lowest shore level varied greatly among the patches compared.

Recruitment patterns and processes of coastal fish species in a temperate rocky reef

Tese de Doutoramento, Ciências do Mar, da Terra e do Ambiente, Ramo: Ciências do Mar, Especialização em Ecologia Marinha, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Agents actifs toxiques dans les produits éclaircissants et leurs impacts sur le microbiome cutané humain

Les produits cosmétiques sont des substances utilisées pour entretenir ou modifier l'aspect des parties superficielles du corps humain (telles que la peau, les ongles ou les cheveux). Dans de nombreux pays d’Afrique et d’Asie et dans certaines communautés africaines immigrantes, plusieurs femmes et parfois des hommes utilisent des produits contenant des agents actifs tels que le mercure, l’hydroquinone et le propionate de clobétasol pour éclaircir leur peau. Ces principaux agents sont toxiques et leur présence dans les cosmétiques est règlementée, voire interdite, dans plusieurs pays. Dans notre étude, nous avons déterminé les concentrations de ces ingrédients dans plusieurs produits utilisés en Afrique de l’Ouest et au Canada. Nous avons également exploré l’effet de ces produits sur le microbiome cutané. Nos résultats révèlent que 68 à 84% des crèmes et 7.5 à 65% des savons dépassent les normes lorsqu’on considère l’interdiction de mercure, d’hydroquinone et de propionate de clobétasol et les concentrations déclarées sur les étiquettes ne sont pas souvent fiables. Selon la diversité de Shannon, il semble y avoir plus d’équitabilité, et donc moins de dominance dans le groupe des femmes utilisant les crèmes éclaircissantes que dans le groupe des femmes qui ne les utilisent pas. Par ailleurs, nous n’avons pas trouvé de différences significatives au niveau du microbiome cutané du groupe avec crèmes et sans crèmes au niveau du phylum et du genre. Cependant, d’autres méthodes plus approfondies avec plus d’échantillonnage pourraient révéler à des échelles plus fines (espèces, souches, etc.) l’effet de ces produits sur le microbiome cutané.

Mercury in Gas Operations - Occupational Health Risk Assessment

The project goal was to determine plant operations and maintenance worker’s level of exposure to mercury during routine and non-routine (i.e. turnarounds and inspections) maintenance events in eight gas processing plants. The project team prepared sampling and analysis plans designed to each plant’s process design and scheduled maintenance events. Occupational exposure sampling and monitoring efforts were focused on the measurement of mercury vapor concentration in worker breathing zone air during specific maintenance events including: pipe scrapping, process filter replacement, and process vessel inspection. Similar exposure groups were identified and worker breathing zone and ambient air samples were collected and analyzed for total mercury. Occupational exposure measurement techniques included portable field monitoring instruments, standard passive and active monitoring methods and an emerging passive absorption technology. Process sampling campaigns were focused on inlet gas streams, mercury removal unit outlets, treated gas, acid gas and sales gas. The results were used to identify process areas with increased potential for mercury exposure during maintenance events. Sampling methods used for the determination of total mercury in gas phase streams were based on the USEPA Methods 30B and EPA 1631 and EPA 1669. The results of four six-week long sampling campaigns have been evaluated and some conclusions and recommendations have been made. The author’s role in this project included the direction of all field phases of the project and the development and implementation of the sampling strategy. Additionally, the author participated in the development and implementation of the Quality Assurance Project Plan, Data Quality Objectives, and Similar Exposure Groups identification. All field generated data was reviewed by the author along with laboratory reports in order to generate conclusions and recommendations.

APPLICATION OF AN IMPUTATION METHOD FOR GEOSPATIAL INVENTORY OF FOREST STRUCTURAL ATTRIBUTES ACROSS MULTIPLE SPATIAL SCALES IN THE LAKE STATES, U.S.A.

Credible spatial information characterizing the structure and site quality of forests is critical to sustainable forest management and planning, especially given the increasing demands and threats to forest products and services. Forest managers and planners are required to evaluate forest conditions over a broad range of scales, contingent on operational or reporting requirements. Traditionally, forest inventory estimates are generated via a design-based approach that involves generalizing sample plot measurements to characterize an unknown population across a larger area of interest. However, field plot measurements are costly and as a consequence spatial coverage is limited. Remote sensing technologies have shown remarkable success in augmenting limited sample plot data to generate stand- and landscape-level spatial predictions of forest inventory attributes. Further enhancement of forest inventory approaches that couple field measurements with cutting edge remotely sensed and geospatial datasets are essential to sustainable forest management. We evaluated a novel Random Forest based k Nearest Neighbors (RF-kNN) imputation approach to couple remote sensing and geospatial data with field inventory collected by different sampling methods to generate forest inventory information across large spatial extents. The forest inventory data collected by the FIA program of US Forest Service was integrated with optical remote sensing and other geospatial datasets to produce biomass distribution maps for a part of the Lake States and species-specific site index maps for the entire Lake State. Targeting small-area application of the state-of-art remote sensing, LiDAR (light detection and ranging) data was integrated with the field data collected by an inexpensive method, called variable plot sampling, in the Ford Forest of Michigan Tech to derive standing volume map in a cost-effective way. The outputs of the RF-kNN imputation were compared with independent validation datasets and extant map products based on different sampling and modeling strategies. The RF-kNN modeling approach was found to be very effective, especially for large-area estimation, and produced results statistically equivalent to the field observations or the estimates derived from secondary data sources. The models are useful to resource managers for operational and strategic purposes.

Agents actifs toxiques dans les produits éclaircissants et leurs impacts sur le microbiome cutané humain

Les produits cosmétiques sont des substances utilisées pour entretenir ou modifier l'aspect des parties superficielles du corps humain (telles que la peau, les ongles ou les cheveux). Dans de nombreux pays d’Afrique et d’Asie et dans certaines communautés africaines immigrantes, plusieurs femmes et parfois des hommes utilisent des produits contenant des agents actifs tels que le mercure, l’hydroquinone et le propionate de clobétasol pour éclaircir leur peau. Ces principaux agents sont toxiques et leur présence dans les cosmétiques est règlementée, voire interdite, dans plusieurs pays. Dans notre étude, nous avons déterminé les concentrations de ces ingrédients dans plusieurs produits utilisés en Afrique de l’Ouest et au Canada. Nous avons également exploré l’effet de ces produits sur le microbiome cutané. Nos résultats révèlent que 68 à 84% des crèmes et 7.5 à 65% des savons dépassent les normes lorsqu’on considère l’interdiction de mercure, d’hydroquinone et de propionate de clobétasol et les concentrations déclarées sur les étiquettes ne sont pas souvent fiables. Selon la diversité de Shannon, il semble y avoir plus d’équitabilité, et donc moins de dominance dans le groupe des femmes utilisant les crèmes éclaircissantes que dans le groupe des femmes qui ne les utilisent pas. Par ailleurs, nous n’avons pas trouvé de différences significatives au niveau du microbiome cutané du groupe avec crèmes et sans crèmes au niveau du phylum et du genre. Cependant, d’autres méthodes plus approfondies avec plus d’échantillonnage pourraient révéler à des échelles plus fines (espèces, souches, etc.) l’effet de ces produits sur le microbiome cutané.

Avaliação de métodos de estimação da variância em amostras complexas

A necessidade de conhecer uma população impulsiona um processo de recolha e análise de informação. Usualmente é muito difícil ou impossível estudar a totalidade da população, daí a importância do estudo com recurso a amostras. Conceber um estudo por amostragem é um processo complexo, desde antes da recolha dos dados até a fase de análise dos mesmos. Na maior parte dos estudos utilizam-se combinações de vários métodos probabilísticos de amostragem para seleção de uma amostra, que se pretende representativa da população, denominado delineamento de amostragem complexo. O conhecimento dos erros de amostragem é necessário à correta interpretação dos resultados de inquéritos e à avaliação dos seus planos de amostragem. Em amostras complexas, têm sido usadas aproximações ajustadas à natureza complexa do plano da amostra para a estimação da variância, sendo as mais utilizadas: o método de linearização Taylor e as técnicas de reamostragem e replicação. O principal objetivo deste trabalho é avaliar o desempenho dos estimadores usuais da variância em amostras complexas. Inspirado num conjunto de dados reais foram geradas três populações com características distintas, das quais foram sorteadas amostras com diferentes delineamentos de amostragem, na expectativa de obter alguma indicação sobre em que situações se deve optar por cada um dos estimadores da variância. Com base nos resultados obtidos, podemos concluir que o desempenho dos estimadores da variância da média amostral de Taylor, Jacknife e Bootstrap varia com o tipo de delineamento e população. De um modo geral, o estimador de Bootstrap é o menos preciso e em delineamentos estratificados os estimadores de Taylor e Jackknife fornecem os mesmos resultados; Evaluation of variance estimation methods in complex samples ABSTRACT: The need to know a population drives a process of collecting and analyzing information. Usually is to hard or even impossible to study the whole population, hence the importance of sampling. Framing a study by sampling is a complex process, from before the data collection until the data analysis. Many studies have used combinations of various probabilistic sampling methods for selecting a representative sample of the population, calling it complex sampling design. Knowledge of sampling errors is essential for correct interpretation of the survey results and evaluation of the sampling plans. In complex samples to estimate the variance has been approaches adjusted to the complex nature of the sample plane. The most common are: the linearization method of Taylor and techniques of resampling and replication. The main objective of this study is to evaluate the performance of usual estimators of the variance in complex samples. Inspired on real data we will generate three populations with distinct characteristics. From this populations will be drawn samples using different sampling designs. In the end we intend to get some lights about in which situations we should opt for each one of the variance estimators. Our results show that the performance of the variance estimators of sample mean Taylor, Jacknife and Bootstrap varies with the design and population. In general, the Bootstrap estimator is less precise and in stratified design Taylor and Jackknife estimators provide the same results.