A Compiler Integrated Assistance for Optimum Data Allocation in Banked Memory Embedded Processors

Bank switching in embedded processors having partitioned memory architecture results in code size as well as run time overhead. An algorithm and its application to assist the compiler in eliminating the redundant bank switching codes introduced and deciding the optimum data allocation to banked memory is presented in this work. A relation matrix formed for the memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Data allocation to memory is done by considering all possible permutation of memory banks and combination of data. The compiler output corresponding to each data mapping scheme is subjected to a static machine code analysis which identifies the one with minimum number of bank switching codes. Even though the method is compiler independent, the algorithm utilizes certain architectural features of the target processor. A prototype based on PIC 16F87X microcontrollers is described. This method scales well into larger number of memory blocks and other architectures so that high performance compilers can integrate this technique for efficient code generation. The technique is illustrated with an example

Entwurf und Betrieb von Regelungs- und Monitoringsystemen für dezentrale Energiesysteme auf der Basis von verteilten Embedded Systems

Nach einem einleitenden ersten Kapitel wird im zweiten Kapitel der Stand der Technik für Regelungs- und Monitoringsysteme mit vernetzten Systemen dargestellt. Daraus wird die Motivation zur Entwicklung neuer, kostengünstiger Systeme abgeleitet. Im dritten Kapitel folgt eine Darstellung der verschiedenen Arten marktverfügbarer Embedded Systems und dafür geeigneter Betriebs­systeme. Anforderungen an verteilte Regelungssysteme, unterschiedliche Strukturen dieser Systeme und deren Vor- und Nachteile sind Gegenstand des vierten Kapitels. Anhand von Beispielen aus den Bereichen Erzeugungsmanagement für den Betrieb von KWK-Anlagen, Energieverbrauchsmonitoring und Smart-Metering wird der Einsatz von verteilten Regelungs- und Monitoringsystemen im fünften Kapitel dargestellt. Im folgenden sechsten Kapitel wird die Bedeutung normierter Kommunikation für den Einsatz in verteilten Systemen sowie dafür vorhandene Standards aus der elektrischen Energieversorgungstechnik und der Automatisierungstechnik behandelt. Der Stand der Internet-Technik für verteilte Systeme ist Gegenstand des siebten Kapitels. Dabei werden zunächst die verschiedenen drahtlosen und drahtgebundenen Kommunikationsmedien vorgestellt und ihre Eigenschaften und die Rand­bedingungen für ihren Einsatz erörtert. Ebenso werden technische Probleme beim Einsatz der Internet-Technik aufgezeigt und Lösungsmöglichkeiten für diese Probleme dargestellt. Es folgt eine Übersicht von Netzwerkdiensten, die für den Betrieb von verteilten Systemen notwendig sind. Außerdem werden Techniken zur Überwachung von verteilten Systemen behandelt. Kapitel acht zeigt Sicherheitsrisiken bei der Nutzung des Internets auf und bewertet verschiedene Techniken zur Absicherung des Netzwerkverkehrs. Kapitel neun stellt ein Internet-basiertes Client-Server-System zur Online-Visualisierung von Anlagendaten im Webbrowser mit Hilfe von Java-Applets und XML-RPC vor. Die Visualisierung von Anlagendaten auf Mobiltelefonen mit Hilfe des Wireless Application Protocol sowie die dafür notwendige Software und Infrastruktur ist Gegenstand des zehnten Kapitels. Im elften Kapitel wird eine neuartige Software für die Simulation von dezentralen Energiesystemen und deren Regelungs­systemen auf Basis von virtuellen Maschinen, virtuellen Netzwerken und einer thermischen Simulationsumgebung vorgestellt sowie deren Anwendung für die Reglerentwicklung erklärt. Verschiedene Techniken für die Installation von Betriebssystemen und Software für die Embedded Systems eines verteilten Systems werden im Kapitel zwölf untersucht. Im Kapitel 13 werden verschiedene Technologien zur Konfiguration und Parametrierung von Regelungssystemen in der industriellen Prozess- und Fertigungs­automatisierung hinsichtlich ihrer Eignung für dezentrale Energiesysteme analysiert. Anschließend wird eine Software zur Installation und Parametrierung von Monitoringsystemen sowie der dazugehörigen Infrastruktur vorgestellt. Kapitel 14 beschäftigt sich mit Anforderungen an die Hardware für verteilte Systeme und mit Maßnahmen zur Erhöhung der Betriebs- und der Datensicherheit. Im 15. Kapitel werden die in den bisherigen Kapiteln vorgestellten Techniken anhand eines großen verteilten Monitoringsystems und anhand eines Power Flow and Power Quality Management Systems auf Basis von verteilten Embedded Systems evaluiert. Kapitel 16 fasst die Ergebnisse der Arbeit zusammen und enthält einen Ausblick auf zukünftige Entwicklungen.

Rotation Invariant Object Recognition from One Training Example

Local descriptors are increasingly used for the task of object recognition because of their perceived robustness with respect to occlusions and to global geometrical deformations. Such a descriptor--based on a set of oriented Gaussian derivative filters-- is used in our recognition system. We report here an evaluation of several techniques for orientation estimation to achieve rotation invariance of the descriptor. We also describe feature selection based on a single training image. Virtual images are generated by rotating and rescaling the image and robust features are selected. The results confirm robust performance in cluttered scenes, in the presence of partial occlusions, and when the object is embedded in different backgrounds.

A Nonparametric Approach to Pricing and Hedging Derivative Securities via Learning Networks

We propose a nonparametric method for estimating derivative financial asset pricing formulae using learning networks. To demonstrate feasibility, we first simulate Black-Scholes option prices and show that learning networks can recover the Black-Scholes formula from a two-year training set of daily options prices, and that the resulting network formula can be used successfully to both price and delta-hedge options out-of-sample. For comparison, we estimate models using four popular methods: ordinary least squares, radial basis functions, multilayer perceptrons, and projection pursuit. To illustrate practical relevance, we also apply our approach to S&P 500 futures options data from 1987 to 1991.

Memory Hierarchy Hardware-Software Co-design in Embedded Systems

The memory hierarchy is the main bottleneck in modern computer systems as the gap between the speed of the processor and the memory continues to grow larger. The situation in embedded systems is even worse. The memory hierarchy consumes a large amount of chip area and energy, which are precious resources in embedded systems. Moreover, embedded systems have multiple design objectives such as performance, energy consumption, and area, etc. Customizing the memory hierarchy for specific applications is a very important way to take full advantage of limited resources to maximize the performance. However, the traditional custom memory hierarchy design methodologies are phase-ordered. They separate the application optimization from the memory hierarchy architecture design, which tend to result in local-optimal solutions. In traditional Hardware-Software co-design methodologies, much of the work has focused on utilizing reconfigurable logic to partition the computation. However, utilizing reconfigurable logic to perform the memory hierarchy design is seldom addressed. In this paper, we propose a new framework for designing memory hierarchy for embedded systems. The framework will take advantage of the flexible reconfigurable logic to customize the memory hierarchy for specific applications. It combines the application optimization and memory hierarchy design together to obtain a global-optimal solution. Using the framework, we performed a case study to design a new software-controlled instruction memory that showed promising potential.

HLA-A Typing in formalin-fixed paraffin embedded tissue samples : towards potential retrospective analysis

El Antígeno Leucocitario Humano (HLA en inglés) ha sido descrito en muchos casos como factor de pronóstico para cáncer. La característica principal de los genes de HLA, localizados en el cromosoma 6 (6p21.3), son sus numerosos polimorfismos. Los análisis de secuencia de nucleótidos muestran que la variación está restringida predominantemente a los exones que codifican los dominios de unión a péptidos de la proteína. Por lo tanto, el polimorfismo del HLA define el repertorio de péptidos que se unen a los alotipos de HLA y este hecho define la habilidad de un individuo para responder a la exposición a muchos agentes infecciosos durante su vida. La tipificación de HLA se ha convertido en un análisis importante en clínica. Muestras de tejido embebidas en parafina y fijadas con formalina (FFPE en inglés) son recolectadas rutinariamente en oncología. Este procedimiento podría ser utilizado como una buena fuente de ADN, dado que en estudios en el pasado los ensayos de recolección de ADN no eran normalmente llevados a cabo de casi ningún tejido o muestra en procedimientos clínicos regulares. Teniendo en cuenta que el problema más importante con el ADN de muestras FFPE es la fragmentación, nosotros propusimos un nuevo método para la tipificación del alelo HLA-A desde muestras FFPE basado en las secuencias del exón 2, 3 y 4. Nosotros diseñamos un juego de 12 cebadores: cuatro para el exón 2 de HLA-A, tres para el exón 3 de HLA-A y cinco para el exón 4 de HLA-A, cada uno de acuerdo las secuencias flanqueantes de su respectivo exón y la variación en la secuencia entre diferentes alelos. 17 muestran FFPE colectadas en el Hospital Universitario de Karolinska en Estocolmo Suecia fueron sometidas a PCR y los productos fueron secuenciados. Finalmente todas las secuencias obtenidas fueron analizadas y comparadas con la base de datos del IMGT-HLA. Las muestras FFPE habían sido previamente tipificadas para HLA y los resultados fueron comparados con los de este método. De acuerdo con nuestros resultados, las muestras pudieron ser correctamente secuenciadas. Con este procedimiento, podemos concluir que nuestro estudio es el primer método de tipificación basado en secuencia que permite analizar muestras viejas de ADN de las cuales no se tiene otra fuente. Este estudio abre la posibilidad de desarrollar análisis para establecer nuevas relaciones entre HLA y diferentes enfermedades como el cáncer también.

General derivative relations for anharmonic force fields

The brace notation, introduced by Allen and Csaszar (1993, J. chem. Phys., 98, 2983), provides a simple and compact way to deal with derivatives of arbitrary non-tensorial quantities. One of its main advantages is that it builds the permutational symmetry of the derivatives directly into the formalism. The brace notation is applied to formulate the general nth-order Cartesian derivatives of internal coordinates, and to provide closed forms for general, nth-order transformation equations of anharmonic force fields, expressed as Taylor series, from internal to Cartesian or normal coordinate spaces.

X-ray crystallographic study of DNA duplex cross-linking: simultaneous binding to two d(CGTACG)(2) molecules by a bis(9-aminoacridine-4-carboxamide) derivative

Acridine-4-carboxamides form a class of known DNA mono-intercalating agents that exhibit cytotoxic activity against tumour cell lines due to their ability to inhibit topoisomerases. Previous studies of bis-acridine derivatives have yielded equivocal results regarding the minimum length of linker necessary between the two acridine chromophores to allow bis-intercalation of duplex DNA. We report here the 1.7 angstrom resolution X-ray crystal structure of a six-carbon-linked bis(acridine-4-carboxamide) ligand bound to d(CGTACG)(2) molecules by non-covalent duplex cross-linking. The asymmetric unit consists of one DNA duplex containing an intercalated acridine-4-carboxamide chromophore at each of the two CG steps. The other half of each ligand is bound to another DNA molecule in a symmetry-related manner, with the alkyl linker threading through the minor grooves. The two crystallographically independent ligand molecules adopt distinct side chain interactions, forming hydrogen bonds to either O6 or N7 on the major groove face of guanine, in contrast to the semi-disordered state of mono-intercalators bound to the same DNA molecule. The complex described here provides the first structural evidence for the non-covalent cross-linking of DNA by a small molecule ligand and suggests a possible explanation for the inconsistent behaviour of six-carbon linked bis-acridines in previous assays of DNA bis-intercalation.

Synthesis of fused cyclic systems containing medium-sized rings through tandem ROM-RCM of norbornene derivatives embedded in a carbohydrate template

A general approach for the synthesis of fused cyclic systems containing medium-sized rings (7-9) has been developed. The key steps involve a diastereoface-selective Diels-Alder reaction of the dienophiles 4a-d attached to a furanosugar with cyclopentadiene and ring opening (ROM)-ring closing metathesis (RCM) of the resulting norbornene derivatives 10a-d and 11a-d. Diels-Alder reaction of the dienophiles 4a-d with cyclopentadiene in the absence of a catalyst produced 10a-d as the major product arising through addition of the diene to the unhindered Si-face. The most interesting and new aspect of the Diels-Alder reaction of these dienophiles is the accessibility of the Re-face that was blocked by the alkenyl chains under Lewis acid catalysis producing the diastereoisomers 11a-d exclusively. The reversal of facial selectivity from an uncatalyzed reaction to a catalyzed one is unprecedented. The observed stereochemical dichotomy is attributed to rotation of the enone moiety along the or bond linking the sugar moiety during formation of the chelate 13. This makes the Re-face of the enone moiety in 4a-d unhindered. Diels-Alder reaction of the carbocyclic analogue 15 under Lewis acid catalysis produced a 1: 1 mixture of the adducts 16 and 17 confirming the participation of sugar ring oxygen in chelate formation. Finally ROM-RCM of 10a-d and 11a-d with Grubbs' catalyst afforded the cis-syn-cis and cis-anti-cis bicyclo-annulated sugars 21a-d and 23a-d, respectively, containing 7-9 membered rings.

Integrative workflow-embedded support for process automation and management

This paper presents the on-going research performed in order to integrate process automation and process management support in the context of media production. This has been addressed on the basis of a holistic approach to software engineering applied to media production modelling to ensure design correctness, completeness and effectiveness. The focus of the research and development has been to enhance the metadata management throughout the process in a similar fashion to that achieved in Decision Support Systems (DSS) to facilitate well-grounded business decisions. The paper sets out the aims and objectives and the methodology deployed. The paper describes the solution in some detail and sets out some preliminary conclusions and the planned future work.

Design of a minimum variance multiple input-multiple output neuro self-tuning proportional-integral-derivative controller for non-linear dynamic systems

In this study a minimum variance neuro self-tuning proportional-integral-derivative (PID) controller is designed for complex multiple input-multiple output (MIMO) dynamic systems. An approximation model is constructed, which consists of two functional blocks. The first block uses a linear submodel to approximate dominant system dynamics around a selected number of operating points. The second block is used as an error agent, implemented by a neural network, to accommodate the inaccuracy possibly introduced by the linear submodel approximation, various complexities/uncertainties, and complicated coupling effects frequently exhibited in non-linear MIMO dynamic systems. With the proposed model structure, controller design of an MIMO plant with n inputs and n outputs could be, for example, decomposed into n independent single input-single output (SISO) subsystem designs. The effectiveness of the controller design procedure is initially verified through simulations of industrial examples.

A parallel convolutional coder including embedded puncturing with application to consumer devices

As consumers demand more functionality) from their electronic devices and manufacturers supply the demand then electrical power and clock requirements tend to increase, however reassessing system architecture can fortunately lead to suitable counter reductions. To maintain low clock rates and therefore reduce electrical power, this paper presents a parallel convolutional coder for the transmit side in many wireless consumer devices. The coder accepts a parallel data input and directly computes punctured convolutional codes without the need for a separate puncturing operation while the coded bits are available at the output of the coder in a parallel fashion. Also as the computation is in parallel then the coder can be clocked at 7 times slower than the conventional shift-register based convolutional coder (using DVB 7/8 rate). The presented coder is directly relevant to the design of modern low-power consumer devices