Étude du rôle de la dopamine et de la sérotonine dans l’effet atténuateur des antipsychotiques et de l’OSU-6162 sur la récompense induite par la stimulation du faisceau médian prosencéphalique chez le rongeur

La voie mésocorticolimbique est constitutée d’un ensemble d’éléments nerveux issus de l’aire tegmentaire ventrale mésencéphalique et projettant vers des régions corticales et sous-corticales. Les neurones à dopamine (DA) qui en font partie modulent plusieurs fonctions cognitives dont l’attention, l’apprentissage et la récompense. L’activité nerveuse des cellules à DA augmente lorsque l’organisme anticipe et reçoit une récompense, ainsi qu’au cours de la phase d’apprentissage des comportements d’appétence. Or, si l’activité dopaminergique de la voie mésocorticolimbique est désordonnée, voire aberrante, des stimuli neutres deviennent saillants et prennent une signification erronée. Cette anomalie fonctionnelle du système dopaminergique pourrait être à l’origine des symptômes psychotiques observés dans la schizophrénie. Cette hypothèse est renforcée par le fait que les médicaments antipsychotiques efficaces ont tous une activité antagoniste aux récepteurs à DA de type 2 (D2); les antipsychotiques dits classiques (i.e. halopéridole) possèdent une forte affinité pour les récepteurs D2 tandis que les antipsychotiques dits atypiques (i.e. clozapine) présentent une plus forte affinité pour les récepteurs à sérotonine de type 2a (5-HT2a) que pour les récepteurs D2. Les antipsychotiques atypiques semblent plus efficaces contre les symptômes négatifs (i.e. anhédonie) de la schizophrénie et induisent moins d’effets moteurs extrapyramidaux et de dysphorie que les antipsychotiques classiques. Il a été proposé que l’efficacité des antipsychotiques atypiques soit expliqué par leur double action antagoniste aux récepteurs 5-HT2a et D2. Afin de mieux comprendre les mécanismes de ces médicaments, nous avons étudié leurs effets sur la récompense en utilisant le modèle d’autostimulation intracérébrale (ASI) chez le rongeur. Le but de la première étude était d’évaluer l’effet d’un antagoniste sélectif des récepteurs 5-HT2a, le M100907, sur la récompense et sur l’atténuation de la récompense induite par l’halopéridole. L’hypothèse était que l’atténuation de la récompense induite par l’ajout du M100907 à l’halopéridole serait similaire à celle induite par la clozapine. Dans une seconde étude, l’effet sur la récompense d’un agoniste partiel aux récepteurs D2, l’OSU-6162, a été caractérisé sous deux conditions : i) en condition de base et ii) lorsque la neurotransmission dopaminergique est altérée par l’administration systémique de quinpirole, un agoniste des récepteurs D2/D3. Les hypothèses étaient que l’OSU-6162 i) atténuerait la récompense induite par la stimulation et ii) empêcherait l’atténuation et la facilitation de la récompense induites par le quinpirole. Les données obtenues montrent que le M100907 n’altère pas la récompense par lui-même mais réduit l’atténuation de la récompense induite par l’halopéridole. La co-administration du M100907 et de l’halopéridole induit une atténuation de la récompense d’amplitude similaire à celle induite par la clozapine, ce qui suggère que l’activité antagoniste aux récepteurs 5-HT2a de la clozapine contribue à son efficacité. Les données de la seconde étude montrent que l’OSU-6162 atténue la récompense, de manière dose-dépendante, ainsi que la facilitation, mais pas l’atténuation de la récompense induite par le quinpirole. Cette dernière observation suggère que l’OSU-6162 agit comme un antagoniste fonctionnel aux récepteurs D2 post-synaptiques. Un ensemble de données suggèrent que le comportement d’ASI constitue un modèle valide permettant d’évaluer l’efficacité antipsychotique potentielle de nouvelles molécules. Le comportement d’ASI est atténué par les antipsychotiques cliniquement efficaces mais est peu ou pas modifié par des molécules dépourvues d’activité antipsychotique. Les données obtenues dans cette thèse permettent de supposer que l’OSU-6162 possède une activité antipsychotique de nature atypique, et cela sans altérer la neurotransmission sérotoninergique.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

Recyclable Short Fibre Reinforced Plastics PP/Nylon and HDPE/Nylon composites

The study shows that standard plastics like polypropylene and high density polyethylene can be reinforced by adding nylon short fibres. Compared to the conventional glass reinforced thermoplastics this novel class of reinforced thermoplastics has the major advantage of recyclability. Hence such composites represent a new spectrum of recyclable polymer composites. The fibre length and fibre diameter used for reinforcement are critical parameters While there is a critical fibre length below which no effective reinforcement takes place, the reinforcement improves when the fibre diameter decreases due to increased surface area.While the fibres alone give moderate reinforcement, chemical modification of the matrix can further improve the strength and modulus of the composites. Maleic anhydride grafting in presence of styrene was found to be the most efficient chemical modification. While the fibre addition enhances the viscosity of the melt at lower shear rates, the enhancement at higher shear rate is only marginal. This shows that processing of the composite can be done in a similar way to that of the matrix polymer in high shear operations such as injection moulding. Another significant observation is the decrease in melt viscosity of the composite upon grafting. Thus chemical modification of matrix makes processing of the composite easier in addition to improving the mechanical load bearing capacity.For the development of a useful short fibre composite, selection of proper materials, optimum design with regard to the particular product and choosing proper processing parameters are most essential. Since there is a co-influence of many parameters, analytical solutions are difficult. Hence for selecting proper processing parameters 'rnold flow' software was utilized. The orientation of the fibres, mechanical properties, temperature profile, shrinkage, fill time etc. were determined using the software.Another interesting feature of the nylon fibre/PP and nylon fibre/HDPE composites is their thermal behaviour. Both nylon and PP degrade at the same temperature in single steps and hence the thermal degradation behaviour of the composites is also being predictable. It is observed that the thermal behaviour of the matrix or reinforcement does not affect each other. Almost similar behaviour is observed in the case of nylon fibre/HDPE composites. Another equally significant factor is the nucleating effect of nylon fibre when the composite melt cools down. In the presence of the fibre the onset of crystallization occurs at slightly higher temperature.When the matrix is modified by grafting, the onset of crystallization occurs at still higher temperature. Hence it may be calculated that one reason for the improvement in mechanical behaviour of the composite is the difference in crystallization behaviour of the matrix in presence of the fibre.As mentioned earlier, a major advantage of these composites is their recyclability. Two basic approaches may be employed for recycling namely, low temperature recycling and high temperature recycling. In the low temperature recycling, the recycling is done at a temperature above the melting point of the matrix, but below that of the fibres while in the high temperature route. the recycling is done at a temperature above the melting points of both matrix and fibre. The former is particularly interesting in that the recycled material has equal or even better mechanical properties compared to the initial product. This is possible because the orientation of the fibre can improve with successive recycling. Hence such recycled composites can be used for the same applications for which the original composite was developed. In high temperature recycling, the composite is converted into a blend and hence the properties will be inferior to that of the original composite, but will be higher than that of the matrix material alone.

Qualitative air flow modelling and analysis of data centre air conditioning as multiple jet array

This work identifies the importance of plenum pressure on the performance of the data centre. The present methodology followed in the industry considers the pressure drop across the tile as a dependant variable, but it is shown in this work that this is the only one independent variable that is responsible for the entire flow dynamics in the data centre, and any design or assessment procedure must consider the pressure difference across the tile as the primary independent variable. This concept is further explained by the studies on the effect of dampers on the flow characteristics. The dampers have found to introduce an additional pressure drop there by reducing the effective pressure drop across the tile. The effect of damper is to change the flow both in quantitative and qualitative aspects. But the effect of damper on the flow in the quantitative aspect is only considered while using the damper as an aid for capacity control. Results from the present study suggest that the use of dampers must be avoided in data centre and well designed tiles which give required flow rates must be used in the appropriate locations. In the present study the effect of hot air recirculation is studied with suitable assumptions. It identifies that, the pressure drop across the tile is a dominant parameter which governs the recirculation. The rack suction pressure of the hardware along with the pressure drop across the tile determines the point of recirculation in the cold aisle. The positioning of hardware in the racks play an important role in controlling the recirculation point. The present study is thus helpful in the design of data centre air flow, based on the theory of jets. The air flow can be modelled both quantitatively and qualitatively based on the results.

CuInS2/In2S3 Cells using a Cost-effective Technique: Significance of Precursor Ratios on Cell Parameters

Thin film solar cells having structure CuInS2/In2S3 were fabricated using chemical spray pyrolysis (CSP) technique over ITO coated glass. Top electrode was silver film (area 0.05 cm2). Cu/In ratio and S/Cu in the precursor solution for CuInS2 were fixed as 1.2 and 5 respectively. In/S ratio in the precursor solution for In2S3 was fixed as 1.2/8. An efficiency of 0.6% (fill factor -37.6%) was obtained. Cu diffusion to the In2S3 layer, which deteriorates junction properties, is inevitable in CuInS2/In2S3 cell. So to decrease this effect and to ensure a Cu-free In2S3 layer at the top of the cell, Cu/In ratio was reduced to 1. Then a remarkable increase in short circuit current density was occurred from 3 mA/cm2 to 14.8 mA/cm2 and an efficiency of 2.13% was achieved. Also when In/S ratio was altered to 1.2/12, the short circuit current density increased to 17.8 mA/cm2 with an improved fill factor of 32% and efficiency remaining as 2%. Thus Cu/In and In/S ratios in the precursor solutions play a crucial role in determining the cell parameters

Hydrogeology and hydrochemistry of the aquifer systems of Kuttanad area, Kerala: Their role in understanding the evolution of groundwaters

This is an attempt to understand the important factors that control the occurrence, development and hydrochemical evolution of groundwater resources in sedimentary multi aquifer systems. The primary objective of this work is an integrated study of the hydrogeology and hydrochemistry with a view to elucidate the hydrochemical evolution of groundwater resources in the aquifer systems. The study is taken up in a typical coastal sedimentary aquifer system evolved under fluvio-marine environment in the coastal area of Kerala, known as the Kuttanad. The present study has been carried out to understand the aquifer systems, their inter relationships and evolution in the Kuttanad area of Kerala. The multi aquifer systems in the Kuttanad basin were formed from the sediments deposited under fluvio-marine and fluvial depositional environments and the marine transgressions and regressions in the geological past and palaeo climatic conditions influenced the hydrochemical environment in these aquifers. The evolution of groundwater and the hydrochemical processes involved in the formation of the present day water quality are elucidated from hydrochemical studies and the information derived from the aquifer geometry and hydraulic properties. Kuttanad area comprises of three types of aquifer systems namely phreatic aquifer underlain by Recent confined aquifer followed by Tertiary confined aquifers. These systems were formed by the deposition of sediments under fluvio-marine and fluvial environment. The study of the hydrochemical and hydraulic properties of the three aquifer systems proved that these three systems are separate entities. The phreatic aquifers in the area have low hydraulic gradients and high rejected recharge. The Recent confined aquifer has very poor hydraulic characteristics and recharge to this aquifer is very low. The Tertiary aquifer system is the most potential fresh water aquifer system in the area and the groundwater flow in the aquifer is converging towards the central part of the study area (Alleppey town) due to large scale pumping of water for water supply from this aquifer system. Mixing of waters and anthropogenic interferences are the dominant processes modifying the hydrochemistry in phreatic aquifers. Whereas, leaching of salts and cation exchange are the dominant processes modifying the hydrochemistry of groundwater in the confined aquifer system of Recent alluvium. Two significant chemical reactions modifying the hydrochemistry in the Recent aquifers are oxidation of iron in ferruginous clays which contributes hydrogen ions and the decomposition of organic matter in the aquifer system which consumes hydrogen ions. The hydrochemical environment is entirely different in the Tertiary aquifers as the groundwater in this aquifer system are palaeo waters evolved during various marine transgressions and regressions and these waters are being modified by processes of leaching of salts, cation exchange and chemical reactions under strong reducing environment. It is proved that the salinity observed in the groundwaters of Tertiary aquifers are not due to seawater mixing or intrusion, but due to dissolution of salts from the clay formations and ion exchange processes. Fluoride contamination in this aquifer system lacks a regional pattern and is more or less site specific in natureThe lowering of piezometric heads in the Tertiary aquifer system has developed as consequence of large scale pumping over a long period. Hence, puping from this aquifer system is to be regulated as a groundwater management strategy. Pumping from the Tertiary aquifers with high capacity pumps leads to well failures and mixing of saline water from the brackish zones. Such mixing zones are noticed from the hydrochemical studies. This is the major aquifer contamination in the Tertiary aquifer system which requires immediate attention. Usage of pumps above 10 HP capacities in wells taping Tertiary aquifers should be discouraged for sustainable development of these aquifers. The recharge areas need to be identified precisely for recharging the aquifer systems throughartificial means.

Impacto del proceso de eliminación del doble conteo del material importado por Carbones del Cerrejón Limited en términos de eficiencia y efectividad en el proceso de nacionalización y liberación del material

La operación de mega minería que abarca CERREJON se desarrolla bajo lo más altos estándares de seguridad y calidad, con el compromiso de entregar al mercado un excelente producto y evitando el deterioro del entorno. Uno de los puntos más fuertes de la compañía se haya en la integración de los procesos productivos entre la mina de carbón, el ferrocarril y el puerto, logrando que la operación sea eficiente y que garantice niveles altos de óptimos resultados y que los porcentajes de falla no existan o cada vez sean menores en el proceso de explotación y transporte del carbón de Colombia hacia el mundo. El departamento de MATERIALES es el punto de origen para garantizar que se desarrolle la operación, dado que el departamento tiene la gran labor de adquirir y entregar los bienes y servicios requeridos por la Compañía al más bajo costo total evaluado, en el menor tiempo posible y bajo el marco de la legislación Colombiana en el proceso de nacionalización, con un alto énfasis en el desarrollo de relaciones fuertes y sinérgicas entre todos los eslabones de la cadena. Todo el proceso del departamento se enmarca dentro de un ciclo que debe encaminarse a ser cada vez más efectivo y eficiente; de allí que se busquen opciones de mejoramiento para afinar los procesos. Para que sea posible y factible manejar una mega operación como esta se requiere afinar al máximo la red que se establece en su cadena de abastecimiento, buscando lograr un flujo de producto, información y fondos que garanticen disponibilidad del producto, para así generar una rentabilidad alta a la compañía, y controlar los costos por la operación. Dado que la cadena de suministro es susceptible a mejoras, gracias a la interacción con los proveedores, colaboradores y clientes; se pretende sacar el mejor provecho de esto, a través del análisis de la cadena actual de CERREJON; presentando una opción de mejora en uno de los eslabones del proceso productivo, esta opción ha sido contemplada desde años anteriores, pero en esta ocasión gracias a la integración de afinamientos en los sistemas de información, y la participación activa de los proveedores, se encuentra una opción viable de la eliminación de un reproceso, que garantiza eficiencia y efectividad en la agilización del ciclo de producción en CERREJON. A través de la ejecución del proyecto de reforma del conteo, se presenta la oportunidad de mejoramiento en la cadena del departamento; el proceso de reconteo en la mina, realizado posteriormente al conteo inicial en Puerto Bolívar, de los materiales que llegan importados vía marítima. El proceso de afinamiento del recibo documental en el consolidador de carga y los mayores proveedores de entrega directa (HITACHI y MCA) al transportador, genera la opción del uso de terminales portátiles, que de la mano con los ajustes documentales, permitirán que la carga sea contada y separada por localización, para enviarla vía tren a LMN, reduciendo tiempo de entrega al cliente final, los costos de remanejo al volver a contar, y los costos asociados a las entregas no oportunas de devolución de contenedores.

Gestión de la cadena de suministros desde la dinámica de sistemas. Aproximación al mejoramiento de la toma de decisiones

El objetivo de este trabajo es hacer un estudio sobre la cadena de suministros en organizaciones empresariales desde la Dinámica de Sistemas y como esta puede aportar al desempeño y el control de las cadenas de suministros. Se buscará Abordar el cocimiento sobre tres perspectivas de Supply Chain y su relación con la dinámica de sistemas. También se buscará identificar los tipos de integración en las actividades de la gestión en la cadena de suministros y sus horizontes de planeación. Por último, se pretende analizar las aplicaciones de Supply Chain Management que se han basado en el uso de la metodología de dinámica de sistemas. Para esto, la investigación empezará por definir la problemática alrededor de unir estas dos áreas y definirá el marco teórico que fundan estas dos disciplinas. Luego se abordará la metodología usada por la Dinámica de Sistemas y los diferentes aspectos de la cadena de suministros. Se Ahondará en el acercamiento de las dos disciplinas y como convergen ayudando la SD a la SCM (Supply Chain Management). En este punto también se describirán los trabajos en los diferentes enfoques que se han hecho a partir de uso de la dinámica de sistemas. Por último, presentaremos las correspondientes conclusiones y comentarios acerca de este campo de investigación y su pertinencia en el campo de la Supply Chain. Esta investigación abarca dos grandes corrientes de pensamiento, una sistémica, a través de la metodología de dinámica de sistemas y la otra, lógico analítica la cual es usada en Supply Chain. Se realizó una revisión de la literatura sobre las aplicaciones de dinámica de sistemas (SD) en el área de Supply Chain, sus puntos en común y se documentaron importantes empleos de esta metodología que se han hecho en la gestión de la cadena de suministros.

Estudio de las variaciones espaciales y temporales de la diversidad genética de la trucha común, Salmo trutta, en ríos de la Península Ibérica

Se ha analizado las causas de la distribución espacial de la variabilidad genética del ADN mitocondrial en poblaciones de trucha común de la cuenca del Duero y de los Pirineos Orientales. En total se han analizado de novo 49 localidades, 13 en la cuenca del río Duero y 36 en los principales ríos del Pirineo oriental. Además se analizaron las fluctuaciones temporales en 14 de las localidades del Pirineo Oriental. Estudios previos indican un marcado contraste de los patrones de diversidad entre ambos territorios. En la cuenca del río Duero los análisis confirmaron la presencia de los dos linajes matriarcales descritos previamente, el linaje Atlántico (AT) y el linaje Duero (DU). Los análisis de la varianza molecular (AMOVA) siguiendo una jerarquía hidrográfica sugirieron una alta estructuración de las poblaciones coincidente con los patrones ictiológicos observados en la cuenca. El linaje DU parece haber estado presente permanentemente en la cuenca interior del Duero, mientras que las zonas más próximas a la desembocadura han padecido diversas colonizaciones de trucha del linaje AT, que reflejarían los cambios climáticos ocurridos en el Cuaternario. Se ha detectado una discrepancia en el límite entre ambos grupos definidos por genes nucleares (alozimas) y el ADN mitocondrial. Estas discrepancias pueden ser debidas a un efecto más severo de la deriva genética en el ADN mitocondrial que en los marcadores nucleares. Sin embargo, en este trabajo se han observado evidencias a favor de selección en el ADN mitocondrial del linaje DU que también explicaría estas discrepancias. El análisis más exhaustivo en las cuencas de los Pirineos orientales, permitió detectar nuevos haplotipos mitocondriales de los linajes Adriático (AD) y Mediterráneo (ME). En esta región, los AMOVAs confirmaron que las diferencias entre poblaciones dentro de río son más importantes que las diferencias entre ríos. No obstante se observó un patrón de aislamiento por distancia en toda la zona, reflejo de la estructuración de las poblaciones en la cuenca del río Ebro. Además, aunque los AMOVAs mostraron que el componente temporal de la variación es inferior al espacial, las fluctuaciones temporales en la comparación matriarcal de las poblaciones resultaron estadísticamente significativas. Estas fluctuaciones están asociadas tanto a la deriva genética como a procesos de flujo génico entre poblaciones próximas. Dentro de las cuencas, los componentes de diferenciación entre afluentes son, en general, superiores a los obtenidos dentro de cada afluente, patrón que parece estar extendido en la trucha común. Los estudios a escala microgeográfica en la Noguera Vallferrera y Noguera Cardós (afluentes del Noguera Pallaresa) reprodujeron este patrón de diferenciación. Los tamaños efectivos y la tasa de migración entre ambos ríos fueron similares a los descritos en poblaciones noratlánticas. Los tamaños efectivos de las hembras (Nef), calculados a partir del ADN mitocondrial fueron menos de la mitad del tamaño efectivo total tanto en la Noguera Vallferrera como en el resto de localidades pirenaicas estudiadas. Estos bajos tamaños efectivos de las hembras serían también responsables de las fluctuaciones temporales observadas. Los ejemplares repoblados parecen hibridar poco con los nativos, pero su presencia podría intensificar indirectamente los procesos de deriva genética y complicar la conservación de los patrimonios genéticos nativos. Con la salvedad de la existencia de selección que favorece a los haplotipos del linaje DU, los procesos poblacionales que regulan la distribución de la variabilidad genética en la cuenca del Duero y en los Pirineos Orientales podrían ser parecidos y caracterizados por la existencia de múltiples demes interconectados a lo largo del curso fluvial.

The influence of viscous and latent heating on crystal-rich magma flow in a conduit

The flow dynamics of crystal-rich high-viscosity magma is likely to be strongly influenced by viscous and latent heat release. Viscous heating is observed to play an important role in the dynamics of fluids with temperature-dependent viscosities. The growth of microlite crystals and the accompanying release of latent heat should play a similar role in raising fluid temperatures. Earlier models of viscous heating in magmas have shown the potential for unstable (thermal runaway) flow as described by a Gruntfest number, using an Arrhenius temperature dependence for the viscosity, but have not considered crystal growth or latent heating. We present a theoretical model for magma flow in an axisymmetric conduit and consider both heating effects using Finite Element Method techniques. We consider a constant mass flux in a 1-D infinitesimal conduit segment with isothermal and adiabatic boundary conditions and Newtonian and non-Newtonian magma flow properties. We find that the growth of crystals acts to stabilize the flow field and make the magma less likely to experience a thermal runaway. The additional heating influences crystal growth and can counteract supercooling from degassing-induced crystallization and drive the residual melt composition back towards the liquidus temperature. We illustrate the models with results generated using parameters appropriate for the andesite lava dome-forming eruption at Soufriere Hills Volcano, Montserrat. These results emphasize the radial variability of the magma. Both viscous and latent heating effects are shown to be capable of playing a significant role in the eruption dynamics of Soufriere Hills Volcano. Latent heating is a factor in the top two kilometres of the conduit and may be responsible for relatively short-term (days) transients. Viscous heating is less restricted spatially, but because thermal runaway requires periods of hundreds of days to be achieved, the process is likely to be interrupted. Our models show that thermal evolution of the conduit walls could lead to an increase in the effective diameter of flow and an increase in flux at constant magma pressure.

Spatial variability of flow statistics within regular building arrays

Turbulence statistics obtained by direct numerical simulations are analysed to investigate spatial heterogeneity within regular arrays of building-like cubical obstacles. Two different array layouts are studied, staggered and square, both at a packing density of λp=0.25 . The flow statistics analysed are mean streamwise velocity ( u− ), shear stress ( u′w′−−−− ), turbulent kinetic energy (k) and dispersive stress fraction ( u˜w˜ ). The spatial flow patterns and spatial distribution of these statistics in the two arrays are found to be very different. Local regions of high spatial variability are identified. The overall spatial variances of the statistics are shown to be generally very significant in comparison with their spatial averages within the arrays. Above the arrays the spatial variances as well as dispersive stresses decay rapidly to zero. The heterogeneity is explored further by separately considering six different flow regimes identified within the arrays, described here as: channelling region, constricted region, intersection region, building wake region, canyon region and front-recirculation region. It is found that the flow in the first three regions is relatively homogeneous, but that spatial variances in the latter three regions are large, especially in the building wake and canyon regions. The implication is that, in general, the flow immediately behind (and, to a lesser extent, in front of) a building is much more heterogeneous than elsewhere, even in the relatively dense arrays considered here. Most of the dispersive stress is concentrated in these regions. Considering the experimental difficulties of obtaining enough point measurements to form a representative spatial average, the error incurred by degrading the sampling resolution is investigated. It is found that a good estimate for both area and line averages can be obtained using a relatively small number of strategically located sampling points.

How many facets are needed to represent the surface energy balance of an urban area?

We investigate the question of how many facets are needed to represent the energy balance of an urban area by developing simplified 3-, 2- and 1-facet versions of a 4-facet energy balance model of two-dimensional streets and buildings. The 3-facet model simplifies the 4-facet model by averaging over the canyon orientation, which results in similar net shortwave and longwave balances for both wall facets, but maintains the asymmetry in the heat fluxes within the street canyon. For the 2-facet model, on the assumption that the wall and road temperatures are equal, the road and wall facets can be combined mathematically into a single street-canyon facet with effective values of the heat transfer coefficient, albedo, emissivity and thermodynamic properties, without further approximation. The 1-facet model requires the additional assumption that the roof temperature is also equal to the road and wall temperatures. Idealised simulations show that the geometry and material properties of the walls and road lead to a large heat capacity of the combined street canyon, whereas the roof behaves like a flat surface with low heat capacity. This means that the magnitude of the diurnal temperature variation of the street-canyon facets are broadly similar and much smaller than the diurnal temperature variation of the roof facets. Consequently, the approximation that the street-canyon facets have similar temperatures is sound, and the road and walls can be combined into a single facet. The roof behaves very differently and a separate roof facet is required. Consequently, the 2-facet model performs similarly to the 4-facet model, while the 1-facet model does not. The models are compared with previously published observations collected in Mexico City. Although the 3- and 2-facet models perform better than the 1-facet model, the present models are unable to represent the phase of the sensible heat flux. This result is consistent with previous model comparisons, and we argue that this feature of the data cannot be produced by a single column model. We conclude that a 2-facet model is necessary, and for numerical weather prediction sufficient, to model an urban surface, and that this conclusion is robust and therefore applicable to more general geometries.

The impact of targeted observations made during the Greenland Flow Distortion Experiment

The impact of targeted sonde observations on the 1-3 day forecasts for northern Europe is evaluated using the Met Office four-dimensional variational data assimilation scheme and a 24 km gridlength limited-area version of the Unified Model (MetUM). The targeted observations were carried out during February and March 2007 as part of the Greenland Flow Distortion Experiment, using a research aircraft based in Iceland. Sensitive area predictions using either total energy singular vectors or an ensemble transform Kalman filter were used to predict where additional observations should be made to reduce errors in the initial conditions of forecasts for northern Europe. Targeted sonde data was assimilated operationally into the MetUM. Hindcasts show that the impact of the sondes was mixed. Only two out of the five cases showed clear forecast improvement; the maximum forecast improvement seen over the verifying region was approximately 5% of the forecast error 24 hours into the forecast. These two cases are presented in more detail: in the first the improvement propagates into the verification region with a developing polar low; and in the second the improvement is associated with an upper-level trough. The impact of cycling targeted data in the background of the forecast (including the memory of previous targeted observations) is investigated. This is shown to cause a greater forecast impact, but does not necessarily lead to a greater forecast improvement. Finally, the robustness of the results is assessed using a small ensemble of forecasts.

An ichnofabric approach to the depositional interpretation of the intensely burrowed Bateig Limestone, Miocene, SE Spain

The foraminiferal-rich pelagic Bateig Limestone forms several varieties of the important building stones quarried at Bateig Hill in southeastern Spain. Three principal ichnofabrics (Bichordites, mottled-Palaeophycus and mottled-Ophiomorpha) are recognized, which are present in at least two (possibly up to four) repeated successions (cycles). Each succession begins with an erosional event. The Bichordites ichnofabric represents a new type of facies, formed as thin turbidity/grain flow, stratiform units derived from sediment slips off a fault into deep water. Each slipped unit became almost completely bioturbated by infaunal echinoids, colonizing by lateral migration. Because of the thinness of the units, successive colonizations tended to truncate the underlying burrows giving rise to a pseudo-stratification. As the Bichordites ichnofabric accumulated on the fault apron, thus reducing the effective height of the fault scarp, the substrate gradually came under the influence of currents traversing the shelf. This led to a change in hydraulic regime, and to the mottled-Palaeophycus and mottled-Ophiomorpha ichnofabrics in sediment deposited under bed load transport, and associated with laminar and cross-stratified beds and local muddy intervals. Reactivation of the fault triggered erosion and channeling and a return to grain flow sedimentation, and to the Bichordites ichnofabric of the succeeding cycle. The highest unit of the Bateig Limestone is formed entirely of cross-stratified calcarenites with occasional Ophiomorpha (Ophiomorpha-primary lamination ichnofabric) and is similar to many shallow marine facies but they still bear a significant content of pelagic foraminifera. The sedimentary setting bears resemblance with that described for the Pleistocene Monte Torre Paleostrait and the modem Strait of Messina (Italy), where the narrow morphology of the depositional area enhanced tidal currents and allowed for high-energy sandy deposition in relatively deep areas. More data on the Miocene paleogeography of the Bateig area should provide further testing for this hypothesis. The ichnofacies and stacking of the Bateig Limestone differ from the classic Seilacherian model in that they reflect changes in hydraulic process and are associated with faulting and subsidence and changes in sediment supply. Recognition of the unusual ichnofabrics and their relationships provides a clear indication of the overall dynamic setting. (c) 2006 Elsevier B.V. All rights reserved.

Monitoring and modelling the three-dimensional flow of water under drip irrigation

The interpretation of soil water dynamics under drip irrigation systems is relevant for crop production as well as on water use and management. In this study a three-dimensional representation of the flow of water under drip irrigation is presented. The work includes analysis of the water balance at point scale as well as area-average, exploring uncertainties in water balance estimations depending on the number of locations sampled. The water flow was monitored by detailed profile water content measurements before irrigation, after irrigation and 24 h later with a dense array of soil moisture access tubes radially distributed around selected drippers. The objective was to develop a methodology that could be used on selected occasions to obtain 'snap shots' of the detailed three-dimensional patterns of soil moisture. Such patterns are likely to be very complex, as spatial variability will be induced for a number of reasons, such as strong horizontal gradients in soil moisture, variations between individual sources in the amount of water applied and spatial variability is soil hydraulic properties. Results are compared with a widely used numerical model, Hydrus-2D. The observed dynamic of the water content distribution is in good agreement with model simulations, although some discrepancies concerning the horizontal distribution of the irrigation bulb are noted due to soil heterogeneity. (c) 2006 Elsevier B.V. All rights reserved.