New developments in batch process input profile optimisation

A novel algorithm for solving nonlinear discrete time optimal control problems with model-reality differences is presented. The technique uses dynamic integrated system optimisation and parameter estimation (DISOPE) which achieves the correct optimal solution in spite of deficiencies in the mathematical model employed in the optimisation procedure. A new method for approximating some Jacobian trajectories required by the algorithm is introduced. It is shown that the iterative procedure associated with the algorithm naturally suits applications to batch chemical processes.

A new approach for the solution of the optimal set-point tracking problem for nonlinear systems

In this paper, a discrete time dynamic integrated system optimisation and parameter estimation algorithm is applied to the solution of the nonlinear tracking optimal control problem. A version of the algorithm with a linear-quadratic model-based problem is developed and implemented in software. The algorithm implemented is tested with simulation examples.

Enhancing fieldwork learning with technology: practitioner's perspectives

This research paper reports the findings from an international survey of fieldwork practitioners on their use of technology to enhance fieldwork teaching and learning. It was found that there was high information technology usage before and after time in the field, but some were also using portable devices such as smartphones and global positioning system whilst out in the field. The main pedagogic reasons cited for the use of technology were the need for efficient data processing and to develop students' technological skills. The influencing factors and barriers to the use of technology as well as the importance of emerging technologies are discussed.

A multi-instrument comparison of integrated water vapour measurements at a high latitude site

We compare measurements of integrated water vapour (IWV) over a subarctic site (Kiruna, Northern Sweden) from five different sensors and retrieval methods: Radiosondes, Global Positioning System (GPS), ground-based Fourier-transform infrared (FTIR) spectrometer, ground-based microwave radiometer, and satellite-based microwave radiometer (AMSU-B). Additionally, we compare also to ERA-Interim model reanalysis data. GPS-based IWV data have the highest temporal coverage and resolution and are chosen as reference data set. All datasets agree reasonably well, but the ground-based microwave instrument only if the data are cloud-filtered. We also address two issues that are general for such intercomparison studies, the impact of different lower altitude limits for the IWV integration, and the impact of representativeness error. We develop methods for correcting for the former, and estimating the random error contribution of the latter. A literature survey reveals that reported systematic differences between different techniques are study-dependent and show no overall consistent pattern. Further improving the absolute accuracy of IWV measurements and providing climate-quality time series therefore remain challenging problems.

Spatial Analysis of Colby College Trails: Perkins Arboretum and Runnals Hill

I created an updated map of trails at Colby College using global positioning system data that were then edited in ArcGIS. The map background, obtained from the Maine Office of GIS, was created from digital orthophotographs produced from aerial photos collected over southwest Maine in Spring 2003. Trail difficulty was determined by creating a slope layer and taking other factors into consideration such as ground surface and path width. The map will eventually be available online, enabling interactive selection of trails where users can access additional trail information.

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Prescrição de exercício físico para mulheres com síndrome dos ovários policísticos: impacto sobre a aptidão cardiorrespiratória e resposta afetiva

analisar o efeito do treinamento aeróbio periodizado sobre a aptidão cardiorrespiratória e respostas afetivas em mulheres com síndrome dos ovários policísticos (SOP) e II) investigar se o exercício aeróbio realizado na zona de prazer para essa população atende a recomendação do American College of Sports Medicine (ACSM) no que se refere à intensidade para melhoria da saúde. Metodologia: foram incluídas mulheres na faixa etária entre 18 e 34 anos, com diagnóstico de SOP de acordo com o Consenso de Rotterdam. Para o subestudo I, oito pacientes sedentárias participaram de 16 semanas de treinamento aeróbio com incrementos mensais de intensidade: fase 1 = 60-70% da frequência cardíaca máxima (FCmax); fase 2 = 70-75% da FCmax; fase 3 = 75-80% da FCmax; fase 4 = 80-85% da FCmax. A intervenção foi realizada três vezes por semana, 40 minutos por sessão. Em todas as sessões foram registradas as respostas afetivas (Feeling Scale -5/+5) e a percepção subjetiva do esforço (escala de Borg CR 6-20). Antes e após a intervenção, as voluntárias realizaram teste ergoespirométrico. Para o subestudo II, 11 pacientes realizaram duas sessões de exercício aeróbio na zona de prazer, sendo registrados parâmetros relativos à demanda física através de receptor de GPS (Global Positioning System) de pulso com cardiofrequencímetro acoplado. As pacientes foram instruídas a realizar 40 minutos de exercício guiadas pelas âncoras verbais bom e muito bom (+3 e +5 na Feeling Scale). Resultados: no subestudo I, após 16 semanas de treinamento, houve aumento da aptidão cardiorrespiratória máxima (17,3%) e submáxima (21,5%). As respostas afetivas variaram entre bom (+3,1 ± 0,8) e razoavelmente bom xi (1,0 ± 0,9) e a percepção subjetiva do esforço entre muito leve a leve (10,2 ± 0,7) e um pouco difícil (12,7 ± 0,6) durante a intervenção. No subestudo II, as pacientes exercitaram-se a ~72,5 ± 6% da FC máxima, ~78,5 ± 6% da FC no limiar anaeróbio e passaram > 95% do tempo em intensidade moderada (~82%) e vigorosa (~16%) durante as sessões experimentais. Em média, as voluntárias reportaram as sessões como fácil (percepção subjetiva do esforço da sessão ~2,2 ± 0,7). Conclusões: o programa de treinamento aeróbio periodizado aumentou a aptidão cardiorrespiratória das pacientes analisadas e foi percebido como uma intervenção prazerosa. Adicionalmente, exercício aeróbio realizado de forma prazerosa atende a recomendação do ACSM no que se refere à intensidade para melhoria da saúde

Space dependency of chemical attributes in an area with sugarcane plantation in Pereira Barreto, SP

The behavior of the chemical attributes is directly influenced by superficial flow and water movement inside the soil. This work aimed to study the space dependency of chemical attributes in an area with sugarcane plantation in Pereira Barreto, SP. An area of 530.67 hectares was mapped using an equipment of Global Positioning System and obtaining a Digital Elevation Model. A set of 134 soil samples were collected every seven hectares in the depths of 0-0.25 m and 0.80-1.00 m. The pH, organic matter (OM), Ca, Mg, K, BS, CEC and base saturation (BS) were analyzed. All the chemical attributes presented similar behavior in the superficial and subsuperficial layer of the soil, which provided better visualization and definition of the homogeneous tillage zones.

Soil texture spatial variability of different parent material in pereira barreto, São Paulo state

The variation of soil textural characteristics is a function of the relief and parent materials. The objective of this work was to study soil texture spatial variability from different parent material in Pereira Barreto, SP. An area of 530.67 hectares was mapped through the use of Global Positioning System receivers and obtaining of Digital Elevation Models. A set of 201 soil samples was collected from every seven hectares, at three depths: 0 - 0.25 m; 0.25 - 0.50 m; and 0.80 - 1.00 m. The amounts of sand, silt and clay were obtained by the pipette method and analyzed by both descriptive statistics and geostatistics. Soil textures varied as a function of parent materials and topography.

Processamento embarcado aplicado a um sistema de deteccão de vazamentos

Embedded systems are widely spread nowadays. An example is the Digital Signal Processor (DSP), which is a high processing power device. This work s contribution consist of exposing DSP implementation of the system logic for detecting leaks in real time. Among the various methods of leak detection available today this work uses a technique based on the pipe pressure analysis and usesWavelet Transform and Neural Networks. In this context, the DSP, in addition to do the pressure signal digital processing, also communicates to a Global Positioning System (GPS), which helps in situating the leak, and to a SCADA, sharing information. To ensure robustness and reliability in communication between DSP and SCADA the Modbus protocol is used. As it is a real time application, special attention is given to the response time of each of the tasks performed by the DSP. Tests and leak simulations were performed using the structure of Laboratory of Evaluation of Measurement in Oil (LAMP), at Federal University of Rio Grande do Norte (UFRN)

Metodologia para avaliação do desempenho de receptor de GPS de uso agrícola em condição cinemática

Activities that use Global Navigation Satellite System (GNSS) are countless and the most used one is the Global Positioning System (GPS) developed by the United States. In precision agriculture there are demands for static and cinematic positioning with distinct levels of accuracy for different applications; nevertheless cinematic performance data are not available as manufacturers of GPS receivers present only static performance information. For this reason it was developed an instrumented vehicle to test a methodology of performance evaluation of GPS receivers in kinematic conditions, which is representative to agricultural operations. A set of instrumentation was composed and used for collecting data under variable speed and rotation direction. Tests were conducted showing that the methodology allows to measure accuracy and precision, but improvements have to be implemented on the instrumentation equipment for long term tests.

Integração de redes GNSS: uma proposta metodológica de densificação da rede SIRGAS na América do Sul

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Transformação de Helmert generalizada no posicionamento de alta precisão: fundamentação teórica e exemplificações

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assimilação do IWV-GPS no Brasil: otimização das estimativas do atraso zenital troposférico em tempo real

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)