Musculoskeletal manifestations in polymyalgia rheumatica and temporal arteritis.

To evaluate the incidence and characteristics of musculoskeletal manifestations in polymyalgia rheumatica (PMR) and temporal arteritis (TA). METHODS The records of 163 cases of PMR or TA diagnosed over a 15 year period in one area of Spain were reviewed for the presence and type of musculoskeletal manifestations. RESULTS Of 163 patients, 90 had isolated PMR and 73 had TA. Eighteen of the 90 patients (20%) with isolated PMR developed distal peripheral arthritis either at diagnosis or during the course of the disease. When it occurred, synovitis was mild, monoarticular or pauci-articular, asymmetrical, transient, and not destructive. Other distal manifestations observed in these patients were carpal tunnel syndrome and distal extremity swelling with pitting oedema. In all cases these manifestations occurred in conjunction with active PMR. As expected, PMR was the most frequent musculoskeletal manifestation in patients with TA, occurring in 56% of cases. On the contrary, only 11% of patients with TA developed peripheral arthritis. An important finding was that peripheral arthritis in these patients appears to be linked only temporally to the presence of simultaneous PMR and is not observed in its absence. Distal extremity swelling or defined polyarthritis were not observed. CONCLUSION The spectrum of distal musculoskeletal manifestations of PMR in our series is similar to that reported in other populations. By contrast, distal musculoskeletal symptoms are uncommon in TA. The almost complete absence of distal musculoskeletal manifestations in patients with pure TA suggests different mechanisms of disease in PMR and TA, supporting the view of two separate conditions or one common disease in which host susceptibility influences the clinical expression.

Common Variable Immunodeficiency: molecular pathways and clinical manifestations

Common variable immunodeficiency (CVID), is a disease that is characterized by hypogammaglobulinemia as well as a defect in T, B and dendritic cells. This leads to recurrent bacterial infection mainly caused by Streptococcus pneumoniae, Klebsiella pneumoniae and Haemophilus influenzae, as well as inflammatory manifestations, i.e. granulomateous disease, gastro-intestinal disorders and chronic lung disease. Intravenous Immunoglobulin (IVIg) therapy reduces CVID susceptibility to bacterial infections to some extend. We analyzed clinical aspects of patients from our database. We recently showed that bacteria-specific CD4 T cells of CVID patients were impaired. We therefor postulated that CVID patients may harbor an acquired T-cell deficiency also called exhaustion. To test this hypothesis, we performed a comprehensive investigation of the functional profiles of bacteria-specific CD4 T cells isolated from 31 healthy individuals and 30 CVID patients. In the present study, we demonstrated that bacteria-specific but not virus-specific CD4 T cells in CVID patients harbored reduced proliferation capacity and expressed high level of PD-1. Interestingly, the blockade of PD-1/PD-1 ligands interactions restored partially bacteria but not virus-specific CD4 T-cell proliferation. Finally, we showed that 1) the level of endotoxins inversely correlates with IgG concentration, 2) IVIG treated CVID patients harbored reduced endotoxemia and 3) IgG concentration exceeding 7 mg/mL strongly reduces both the proportion of CVID patients with detectable endotoxemia and the concentration of endotoxins in plasma. Taken together our observations, suggest that primary B-cell defect(s) in CVID patients leads to recurrent bacterial infections that are associated to an acquired (secondary) impairment of CD4 T cells which may in turn exacerbate the lack of protection against extracellular bacteria.

Severe neurologic manifestations from cervical spine instability in spondylo-megaepiphyseal-metaphyseal dysplasia.

Spondylo-megaepiphyseal-metaphyseal dysplasia (SMMD; OMIM 613330) is a dysostosis/dysplasia caused by recessive mutations in the homeobox-containing gene, NKX3-2 (formerly known as BAPX1). Because of the rarity of the condition, its diagnostic features and natural course are not well known. We describe clinical and radiographic findings in six patients (five of which with homozygous mutations in the NKX3-2 gene) and highlight the unusual and severe changes in the cervical spine and the neurologic complications. In individuals with SMMD, the trunk and the neck are short, while the limbs, fingers and toes are disproportionately long. Radiographs show a severe ossification delay of the vertebral bodies with sagittal and coronal clefts, missing ossification of the pubic bones, large round "balloon-like" epiphyses of the long bones, and presence of multiple pseudoepiphyses at all metacarpals and phalanges. Reduced or absent ossification of the cervical vertebrae leads to cervical instability with anterior or posterior kinking of the cervical spine (swan neck-like deformity, kyknodysostosis). As a result of the cervical spine instability or deformation, five of six patients in our series suffered cervical cord injury that manifested clinically as limb spasticity. Although the number of individuals observed is small, the high incidence of cervical spine deformation in SMMD is unique among skeletal dysplasias. Early diagnosis of SMMD by recognition of the radiographic pattern might prevent of the neurologic complications via prophylactic cervical spine stabilization. © 2012 Wiley Periodicals, Inc.

Respiratory responses associated with affective processing of film stimuli

We investigated respiratory responses during film clip viewing and their relation to the affective dimensions of valence and arousal. Seventy-six subjects participated in a study using a between groups design. To begin with, all participants viewed an emotionally neutral film clip. Then, they were presented with one out of four emotional film clips: a positive high-arousal, a positive low-arousal, a negative high-arousal and a negative low-arousal clip. Respiration, skin conductance level, heart rate, corrugator activity and affective judgments were measured. Expiratory time was shorter and inspiratory duty cycle, mean expiratory flow and minute ventilation were larger during the high-arousal clips compared to the low-arousal clips. The pleasantness of the stimuli had no influence on any respiratory measure. These findings confirm the importance of arousal in respiratory responding but also evidence differences in comparison to previous studies using visual and auditory stimuli. [Authors]

Highway Relocation: U.S. 30/Lincoln Highway film production, 1960

The film depicts period traffic congestion, sharp and winding sections of road, steep hills making trucks slow to a crawl, and dangerous vehicle and pedestrian crossings, all important reasons why highway design and safety improvements, and highway relocation were needed. In fact, when the film was produced, U.S. 30 or the Lincoln Highway was the busiest primary road in Iowa; and the section between State Center and Boone was deemed “critical,” meaning it was considered dangerous by the ISHC’s Efficiency Standards.

Three-dimensional aspects of fluid flows in channels. II. Effects of meniscus and thin film regimes on viscous fingers

We perform a three-dimensional study of steady state viscous fingers that develop in linear channels. By means of a three-dimensional lattice-Boltzmann scheme that mimics the full macroscopic equations of motion of the fluid momentum and order parameter, we study the effect of the thickness of the channel in two cases. First, for total displacement of the fluids in the channel thickness direction, we find that the steady state finger is effectively two-dimensional and that previous two-dimensional results can be recovered by taking into account the effect of a curved meniscus across the channel thickness as a contribution to surface stresses. Second, when a thin film develops in the channel thickness direction, the finger narrows with increasing channel aspect ratio in agreement with experimental results. The effect of the thin film renders the problem three-dimensional and results deviate from the two-dimensional prediction.

Three-dimensional aspects of fluid flows in channels. I. Meniscus and thin film regimes

We study the forced displacement of a fluid-fluid interface in a three-dimensional channel formed by two parallel solid plates. Using a lattice-Boltzmann method, we study situations in which a slip velocity arises from diffusion effects near the contact line. The difference between the slip and channel velocities determines whether the interface advances as a meniscus or a thin film of fluid is left adhered to the plates. We find that this effect is controlled by the capillary and Péclet numbers. We estimate the crossover from a meniscus to a thin film and find good agreement with numerical results. The penetration regime is examined in the steady state. We find that the occupation fraction of the advancing finger relative to the channel thickness is controlled by the capillary number and the viscosity contrast between the fluids. For high viscosity contrast, lattice-Boltzmann results agree with previous results. For zero viscosity contrast, we observe remarkably narrow fingers. The shape of the finger is found to be universal.

Hedwig and The Angry Inch: Plato at the Sundance Film Festival

The aim of this article is to show how an ancient myth, that of the three genres, also known as the myth of the androgynous by Aristophanes in Plato¿s Symposium, becomes for John Cameron Mitchell the suitable image in order to explain the peculiar personality of a man, Hedwig, who by means of a surgical operation becomes in his turn an imperfect androgynous but symbolises the need of a sole mankind or the unity of different worlds, just as he belonged to both Berlins divided by an already fallen wall, which permitted their inhabitants to recover their lost unity and identity.

Low temperature amorphous and nanocrystalline silicon thin film transistors deposited by Hot-Wire CVD on glass substrate

Amorphous and nanocrystalline silicon films obtained by Hot-Wire Chemical Vapor Deposition have been incorporated as active layers in n-type coplanar top gate thin film transistors deposited on glass substrates covered with SiO 2. Amorphous silicon devices exhibited mobility values of 1.3 cm 2 V - 1 s - 1, which are very high taking into account the amorphous nature of the material. Nanocrystalline transistors presented mobility values as high as 11.5 cm 2 V - 1 s - 1 and resulted in low threshold voltage shift (∼ 0.5 V).

Film-free laser forward printing of transparent and weakly absorbing liquids

A laser-based technique for printing transparent and weakly absorbing liquids is developed. Its principle of operation relies in the tight focusing of short laser pulses inside the liquid and close to its free surface, in such a way that the laser radiation is absorbed in a tiny volume around the beam waist, with practically no absorption in any other location along the beam path. If the absorbed energy overcomes the optical breakdown threshold, a cavitation bubble is generated, and its expansion results in the propulsion of a small fraction of liquid which can be collected on a substrate, leading to the printing of a microdroplet for each laser pulse. The technique does not require the preparation of the liquid in thin film form, and its forward mode of operation imposes no restriction concerning the optical properties of the substrate. These characteristics make it well suited for printing a wide variety of materials of interest in diverse applications. We demonstrate that the film-free laser forward printing technique is capable of printing microdroplets with good resolution, reproducibility and control, and analyze the influence of the main process parameter, laser pulse energy. The mechanisms of liquid printing are also investigated: time-resolved imaging provides a clear picture of the dynamics of liquid transfer which allows understanding the main features observed in the printed droplets.

Three-dimensional aspects of fluid flows in channels. II. Effects of meniscus and thin film regimes on viscous fingers

We perform a three-dimensional study of steady state viscous fingers that develop in linear channels. By means of a three-dimensional lattice-Boltzmann scheme that mimics the full macroscopic equations of motion of the fluid momentum and order parameter, we study the effect of the thickness of the channel in two cases. First, for total displacement of the fluids in the channel thickness direction, we find that the steady state finger is effectively two-dimensional and that previous two-dimensional results can be recovered by taking into account the effect of a curved meniscus across the channel thickness as a contribution to surface stresses. Second, when a thin film develops in the channel thickness direction, the finger narrows with increasing channel aspect ratio in agreement with experimental results. The effect of the thin film renders the problem three-dimensional and results deviate from the two-dimensional prediction.