The emergence of forensic nursing and advanced nursing practice in Switzerland: an innovative case study consultation.

BACKGROUND AND METHODS: The objectives of this article were to systematically describe and examine the novel roles and responsibilities assumed by nurses in a forensic consultation for victims of violence at a University Hospital in French-speaking Switzerland. Utilizing a case study methodology, information was collected from two main sources: (a) discussion groups with nurses and forensic pathologists and (b) a review of procedures and protocols. Following a critical content analysis, the roles and responsibilities of the forensic nurses were described and compared with the seven core competencies of advanced nursing practice as outlined by Hamric, Spross, and Hanson (2009). RESULTS: Advanced nursing practice competencies noted in the analysis included "direct clinical practice," "coaching and guidance," and "collaboration." The role of the nurse in terms of "consultation," "leadership," "ethics," and "research" was less evident in the analysis. DISCUSSION AND CONCLUSION: New forms of nursing are indeed practiced in the forensic clinical setting, and our findings suggest that nursing practice in this domain is following the footprints of an advanced nursing practice model. Further reflections are required to determine whether the role of the forensic nurse in Switzerland should be developed as a clinical nurse specialist or that of a nurse practitioner.

The statistical accuracy of surveys on business and economic perspectives: a case study

In this paper, we develop a new decision making model and apply it in political Surveys of economic climate collect opinions of managers about the short-term future evolution of their business. Interviews are carried out on a regular basis and responses measure optimistic, neutral or pessimistic views about the economic perspectives. We propose a method to evaluate the sampling error of the average opinion derived from a particular type of survey data. Our variance estimate is useful to interpret historical trends and to decide whether changes in the index from one period to another are due to a structural change or whether ups and downs can be attributed to sampling randomness. An illustration using real data from a survey of business managers opinions is discussed.

The cost effectiveness of pharmacological smoking cessation therapies in developing countries: a case study in the Seychelles

OBJECTIVE: To examine the incremental cost effectiveness of the five first line pharmacological smoking cessation therapies in the Seychelles and other developing countries. DESIGN: A Markov chain cohort simulation. SUBJECTS: Two simulated cohorts of smokers: (1) a reference cohort given physician counselling only; (2) a treatment cohort given counselling plus cessation therapy. INTERVENTION: Addition of each of the five pharmacological cessation therapies to physician provided smoking cessation counselling. MAIN OUTCOME MEASURES: Cost per life-year saved (LYS) associated with the five pharmacotherapies. Effectiveness expressed as odds ratios for quitting associated with pharmacotherapies. Costs based on the additional physician time required and retail prices of the medications. RESULTS: Based on prices for currently available generic medications on the global market, the incremental cost per LYS for a 45 year old in the Seychelles was 599 US dollars for gum and 227 dollars for bupropion. Assuming US treatment prices as a conservative estimate, the incremental cost per LYS was significantly higher, though still favourable in comparison to other common medical interventions: 3712 dollars for nicotine gum, 1982 dollars for nicotine patch, 4597 dollars for nicotine spray, 4291 dollars for nicotine inhaler, and 1324 dollars for bupropion. Cost per LYS increased significantly upon application of higher discount rates, which may be used to reflect relatively high opportunity costs for health expenditures in developing countries with highly constrained resources and high overall mortality. CONCLUSION: Pharmacological cessation therapy can be highly cost effective as compared to other common medical interventions in low mortality, middle income countries, particularly if medications can be procured at low prices.

A semi-grand canonical Monte Carlo simulation model for ion binding to ionizable surfaces: proton binding of carboxylated latex particles as a case study

In this paper, we present a computer simulation study of the ion binding process at an ionizable surface using a semi-grand canonical Monte Carlo method that models the surface as a discrete distribution of charged and neutral functional groups in equilibrium with explicit ions modelled in the context of the primitive model. The parameters of the simulation model were tuned and checked by comparison with experimental titrations of carboxylated latex particles in the presence of different ionic strengths of monovalent ions. The titration of these particles was analysed by calculating the degree of dissociation of the latex functional groups vs. pH curves at different background salt concentrations. As the charge of the titrated surface changes during the simulation, a procedure to keep the electroneutrality of the system is required. Here, two approaches are used with the choice depending on the ion selected to maintain electroneutrality: counterion or coion procedures. We compare and discuss the difference between the procedures. The simulations also provided a microscopic description of the electrostatic double layer (EDL) structure as a function of p H and ionic strength. The results allow us to quantify the effect of the size of the background salt ions and of the surface functional groups on the degree of dissociation. The non-homogeneous structure of the EDL was revealed by plotting the counterion density profiles around charged and neutral surface functional groups.

Corporate responsibility in the postnational constellation : a multiple-case study

In my thesis I present the findings of a multiple-case study on the CSR approach of three multinational companies, applying Basu and Palazzo's (2008) CSR-character as a process model of sensemaking, Suchman's (1995) framework on legitimation strategies, and Habermas (1996) concept of deliberative democracy. The theoretical framework is based on the assumption of a postnational constellation (Habermas, 2001) which sends multinational companies onto a process of sensemaking (Weick, 1995) with regards to their responsibilities in a globalizing world. The major reason is that mainstream CSR-concepts are based on the assumption of a liberal market economy embedded in a nation state that do not fit the changing conditions for legitimation of corporate behavior in a globalizing world. For the purpose of this study, I primarily looked at two research questions: (i) How can the CSR approach of a multinational corporation be systematized empirically? (ii) What is the impact of the changing conditions in the postnational constellation on the CSR approach of the studied multinational corporations? For the analysis, I adopted a holistic approach (Patton, 1980), combining elements of a deductive and inductive theory building methodology (Eisenhardt, 1989b; Eisenhardt & Graebner, 2007; Glaser & Strauss, 1967; Van de Ven, 1992) and rigorous qualitative data analysis. Primary data was collected through 90 semi-structured interviews in two rounds with executives and managers in three multinational companies and their respective stakeholders. Raw data originating from interview tapes, field notes, and contact sheets was processed, stored, and managed using the software program QSR NVIVO 7. In the analysis, I applied qualitative methods to strengthen the interpretative part as well as quantitative methods to identify dominating dimensions and patterns. I found three different coping behaviors that provide insights into the corporate mindset. The results suggest that multinational corporations increasingly turn towards relational approaches of CSR to achieve moral legitimacy in formalized dialogical exchanges with their stakeholders since legitimacy can no longer be derived only from a national framework. I also looked at the degree to which they have reacted to the postnational constellation by the assumption of former state duties and the underlying reasoning. The findings indicate that CSR approaches become increasingly comprehensive through integrating political strategies that reflect the growing (self-) perception of multinational companies as political actors. Based on the results, I developed a model which relates the different dimensions of corporate responsibility to the discussion on deliberative democracy, global governance and social innovation to provide guidance for multinational companies in a postnational world. With my thesis, I contribute to management research by (i) delivering a comprehensive critique of the mainstream CSR-literature and (ii) filling the gap of thorough qualitative research on CSR in a globalizing world using the CSR-character as an empirical device, and (iii) to organizational studies by further advancing a deliberative view of the firm proposed by Scherer and Palazzo (2008).

The Emergence of Forensic Nursing and Advanced Nursing Practice in Switzerland: An Innovative Case Study Consultation.

BACKGROUND AND METHODS:: The objectives of this article were to systematically describe and examine the novel roles and responsibilities assumed by nurses in a forensic consultation for victims of violence at a University Hospital in French-speaking Switzerland. Utilizing a case study methodology, information was collected from two main sources: (a) discussion groups with nurses and forensic pathologists and (b) a review of procedures and protocols. Following a critical content analysis, the roles and responsibilities of the forensic nurses were described and compared with the seven core competencies of advanced nursing practice as outlined by Hamric, Spross, and Hanson (2009). RESULTS:: Advanced nursing practice competencies noted in the analysis included "direct clinical practice," "coaching and guidance," and "collaboration." The role of the nurse in terms of "consultation," "leadership," "ethics," and "research" was less evident in the analysis. DISCUSSION AND CONCLUSION:: New forms of nursing are indeed practiced in the forensic clinical setting, and our findings suggest that nursing practice in this domain is following the footprints of an advanced nursing practice model. Further reflections are required to determine whether the role of the forensic nurse in Switzerland should be developed as a clinical nurse specialist or that of a nurse practitioner.

Large-scale DNA sequencing in taxonomy and conservation : a case study with the mayfly family Heptageniidae (Ephemeroptera) in the Alps and Madagascar

Les larves aquatiques d'éphémères (Ephemeroptera) colonisent toutes les eaux douces du monde et sont couramment utilisées comme bio-indicateurs de la qualité de l'eau. Le genre Rhithrogena (Heptageniidae) est le deuxième plus diversifié chez les éphémères, et plusieurs espèces européennes ont une distribution restreinte dans des environnements alpins sensibles. Les espèces de Rhithrogena ont été classées en "groupes d'espèces" faciles à identifier. Cependant, malgré leur importance écologique et en terme de conservation, beaucoup d'espèces présentent des différences morphologiques ambiguës, suggérant que lataxonomie actuelle ne refléterait pas correctement leur diversité évolutive. De plus, aucune information sur leurs relations, leur origine, le taux de spéciation ou les mécanismes ayant provoqué leur remarquable diversification dans les Alpes n'est disponible. Nous avons d'abord examiné le statut spécifique d'environ 50% des espèces européennes de Rhithrogena en utilisant un large échantillonnage de populations alpines incluant 22 localités typiques, ainsi qu'une analyse basée sur le modèle général mixte de Yule et de coalescence (GMYC) appliqué à un gène mitochondrial standard (coxl) et à un gène nucléaire développé spécifiquement pour cette étude. Nous avons observé un regroupement significatif des séquences coxl en 31 espèces potentielles, et nos résultats ont fortement suggéré la présence d'espèces cryptiques et de fractionnements taxonomiques excessifs chez les Rhithrogena. Nos analyses phylogénétiques ont démontré la monophylie de quatre des six groupes d'espèces reconnus présents dans notre échantillonnage. La taxonomie ADN développée dans cette étude pose les bases d'une future révision de ce genre important mais cryptique en Europe. Puis nous avons mené une étude phylogénétique multi-gènes entre les espèces européennes de Rhithrogena. Les données provenant de trois gènes nucléaires et de deux gènes mitochondriaux ont été largement concordantes, et les relations entre les espèces bien résolues au sein de la plupart des groupes d'espèces dans une analyse combinant tous les gènes. En l'absence de points de calibration extérieurs tels que des fossiles, nous avons appliqué à nos données mitochondriales une horloge moléculaire standard pour les insectes, suggérant une origine des Rhithrogena alpins à la limite Oligocène / Miocène. Nos résultats ont montré le rôle prépondérant qu'ont joué les glaciations du quaternaire dans leur diversification, favorisant la spéciation d'au moins la moitié des espèces actuelle dans les Alpes. La biodiversité et le taux d'endémisme à Madagascar, notamment au niveau de la faune des eaux douces, sont parmi les plus extraordinaires et les plus menacés au monde. On pense que beaucoup d'espèces d'éphémères sont restreintes à un seul bassin versant (microendémisme) dans les zones forestières, ce qui les rendrait particulièrement sensibles à la réduction et à la dégradation de leur habitat. Mis à part deux espèces décrites, Afronurus matitensis et Compsoneuria josettae, les Heptageniidae sont pratiquement inconnus à Madagascar. Les deux genres ont une distribution discontinue en Afrique, à Madagascar et en Asie du Sud-Est, et leur taxonomie complexe est régulièrement révisée. L'approche standard pour comprendre leur diversité, leur endémisme et leur origine requerrait un échantillonnage étendu sur plusieurs continents et des années de travaux taxonomiques. Pour accélérer le processus, nous avons utilisé des collections de musées ainsi que des individus fraîchement collectés, et appliqué une approche combinant taxonomie ADN et phylogénie. L'analyses GMYC du gène coxl a délimité 14 espèces potentielles à Madagascar, dont 70% vraisemblablement microendémiques. Une analyse phylogénique incluant des espèces africaines et asiatiques portant sur deux gènes mitochondriaux et quatre gènes nucléaires a montré que les Heptageniidae malgaches sont monophylétiques et groupe frère des Compsoneuria africains. L'existence de cette lignée unique, ainsi qu'un taux élevé de microendémisme, mettent en évidence leur importance en terme de conservation. Nos résultats soulignent également le rôle important que peuvent jouer les collections de musées dans les études moléculaires et en conservation. - Aquatic nymphs of mayflies (Ephemeroptera) colonize all types of freshwaters throughout the world and are extensively used as bio-indicators of water quality. Rhithrogena (Heptageniidae) is the second most species-rich genus of mayflies, and several European species have restricted distributions in sensitive Alpine environments and therefore are of conservation interest. The European Rhithrogena species are arranged into "species groups" that are easily identifiable. However, despite their ecological and conservation importance, ambiguous morphological differences among many species suggest that the current taxonomy may not accurately reflect their evolutionary diversity. Moreover, no information about their relationships, origin, timing of speciation and mechanisms promoting their successful diversification in the Alps is available. We first examined the species status of ca. 50% of European Rhithrogena diversity using a widespread sampling scheme of Alpine species that included 22 type localities, general mixed Yule- coalescent (GMYC) model analysis of one standard mitochondrial (coxl) and one newly developed nuclear marker. We observed significant clustering of coxl into 31 GMYC species, and our results strongly suggest the presence of both cryptic diversity and taxonomic oversplitting in Rhithrogena. Phylogenetic analyses recovered four of the six recognized species groups in our samples as monophyletic. The DNA taxonomy developed here lays the groundwork for a future revision of this important but cryptic genus in Europe. Then we conducted a species-level, multiple-gene phylogenetic study of European Rhithrogena. Data from three nuclear and two mitochondrial loci were broadly congruent, and species-level relationships were well resolved within most species groups in a combined analysis. In the absence of external calibration points like fossils, we applied a standard insect molecular clock hypothesis to our mitochondrial data, suggesting an origin of Alpine Rhithrogena in the Oligocene / Miocene boundary. Our results highlighted the preponderant role that quaternary glaciations played in their diversification, promoting speciation of at least half of the current diversity in the Alps. Madagascar's biodiversity and endemism are among the most extraordinary and endangered in the world. This includes the island's freshwater biodiversity, although detailed knowledge of the diversity, endemism, and biogeographic origin of freshwater invertebrates is lacking. Many mayfly species are thought to be restricted to single river basins (microendemic species) in forested areas, making them particularly sensitive to habitat reduction and degradation. The Heptageniidae are practically unknown in Madagascar except for two described species, Afronurus matitensis and Compsoneuria josettae. Both genera have a disjunct distribution in Africa, Madagascar and Southeast Asia, and a complex taxonomic status still in flux. The standard approach to understanding their diversity, endemism, and origin would require extensive field sampling on several continents and years of taxonomic work. Here we circumvent this using museum collections and freshly collected individuals in a combined approach of DNA taxonomy and phylogeny. The cox/-based GMYC analysis revealed 14 putative species on Madagascar, 70% of which potentially microendemics. A phylogenetic analysis that included African and Asian species and data from two mitochondrial and four nuclear loci indicated the Malagasy Heptageniidae are monophyletic and sister to African Compsoneuria. The observed monophyly and high microendemism highlight their conservation importance. Our results also underline the important role that museum collections can play in molecular studies, especially in critically endangered biodiversity hotspots like Madagascar.

First level ontology - case study

The file contains the ontology created and instantiated according to a case study as well as a little explanation of the framework in which it is included.

Redefining dropping out in online higher education: a case study from the UOC

In recent years, studies into the reasons for dropping out of higher education (including online education) have been undertaken with greater regularity, parallel to the rise in the relative weight of this type of education, compared with brick-and-mortar education. However, the work invested in characterising the students who drop out of education, compared with those who do not, appears not to have had the same relevance as that invested in the analysis of the causes. The definition of dropping out is very sensitive to the context. In this article, we reach a purely empirical definition of student dropping out, based on the probability of not continuing a specific academic programme following several consecutive semesters of "theoretical break". Dropping out should be properly defined before analysing its causes, as well as comparing the drop-out rates between the different online programmes, or between online and on-campus ones. Our results show that there are significant differences among programmes, depending on their theoretical extension, but not their domain of knowledge.

Alcohol and cannabis use as risk factors for injury--a case-crossover analysis in a Swiss hospital emergency department.

BACKGROUND: There is sufficient and consistent evidence that alcohol use is a causal risk factor for injury. For cannabis use, however, there is conflicting evidence; a detrimental dose-response effect of cannabis use on psychomotor and other relevant skills has been found in experimental laboratory studies, while a protective effect of cannabis use has also been found in epidemiological studies. METHODS: Implementation of a case-crossover design study, with a representative sample of injured patients (N = 486; 332 men; 154 women) from the Emergency Department (ED) of the Lausanne University Hospital, which received treatment for different categories of injuries of varying aetiology. RESULTS: Alcohol use in the six hours prior to injury was associated with a relative risk of 3.00 (C.I.: 1.78, 5.04) compared with no alcohol use, a dose-response relationship also was found. Cannabis use was inversely related to risk of injury (RR: 0.33; C.I.: 0.12, 0.92), also in a dose-response like manner. However, the sample size for people who had used cannabis was small. Simultaneous use of alcohol and cannabis did not show significantly elevated risk. CONCLUSION: The most surprising result of our study was the inverse relationship between cannabis use and injury. Possible explanations and underlying mechanisms, such as use in safer environments or more compensatory behavior among cannabis users, were discussed.

Performance measurement oforder-delivery chain in SMEs: Case study

Tutkimus pyrkii selvittämään, kuinka tehokas suorituskykymittaristo voidaan parhaiten suunnitella pk-yrityksessä. Tutkimuksen tavoitteena on luoda suorituskykymittaristo pienen kohdeyrityksen johtajien tarpeisiin. Päähuomion kohteena on yrityksen tilaus-toimitusketju ja arvoverkko. Työ on luonteeltaan kvalitatiivinen toimintatutkimus, joka noudattaa toiminta-analyyttista tutkimusotetta. Työn teoriaosassa selvitetään, kuinka suorituskyvyn mittaaminen sekä materiaali-, tieto- ja rahavirtojen hallinta on kehittynyt viime vuosina pk-yrityksen näkökulmasta. Mittariston suunnittelu aloitetaan kohdeyrityksen perusteellisella analyysilla. Tämän pohjalta määritellään yrityksen kriittiset menestystekijät, joista lopulta johdetaan suorituskykymittarit. Tutkimuksen perusteella voidaan todeta, että yleinen asenne mittaamista kohtaan, strategian huomioinnin puute sekä tietojärjestelmien rajoitteet ovat päähaasteita pk-yrityksen suorituskyvyn mittaamisessa. Mittareiden tuleekin olla melko yksinkertaisia ja helppoja käyttää, jotta mittaamisen ei koettaisi kuluttavan rajallisia resursseja liikaa. Mittariston tulee kuitenkin antaa kokonaisvaltainen kuva yrityksen suorituskyvystä, johon vaikuttavat kaikki arvoverkon osapuolet ja heidän yhteistyö toistensa kanssa.

Development of a 3D very high-resolution seismic reflection system for lacustrine settings - a case study over a thrust fault zone in Lake Geneva

Un système efficace de sismique tridimensionnelle (3-D) haute-résolution adapté à des cibles lacustres de petite échelle a été développé. Dans le Lac Léman, près de la ville de Lausanne, en Suisse, des investigations récentes en deux dimension (2-D) ont mis en évidence une zone de faille complexe qui a été choisie pour tester notre système. Les structures observées incluent une couche mince (<40 m) de sédiments quaternaires sub-horizontaux, discordants sur des couches tertiaires de molasse pentées vers le sud-est. On observe aussi la zone de faille de « La Paudèze » qui sépare les unités de la Molasse du Plateau de la Molasse Subalpine. Deux campagnes 3-D complètes, d?environ d?un kilomètre carré, ont été réalisées sur ce site de test. La campagne pilote (campagne I), effectuée en 1999 pendant 8 jours, a couvert 80 profils en utilisant une seule flûte. Pendant la campagne II (9 jours en 2001), le nouveau système trois-flûtes, bien paramétrés pour notre objectif, a permis l?acquisition de données de très haute qualité sur 180 lignes CMP. Les améliorations principales incluent un système de navigation et de déclenchement de tirs grâce à un nouveau logiciel. Celui-ci comprend un contrôle qualité de la navigation du bateau en temps réel utilisant un GPS différentiel (dGPS) à bord et une station de référence près du bord du lac. De cette façon, les tirs peuvent être déclenchés tous les 5 mètres avec une erreur maximale non-cumulative de 25 centimètres. Tandis que pour la campagne I la position des récepteurs de la flûte 48-traces a dû être déduite à partir des positions du bateau, pour la campagne II elle ont pu être calculées précisément (erreur <20 cm) grâce aux trois antennes dGPS supplémentaires placées sur des flotteurs attachés à l?extrémité de chaque flûte 24-traces. Il est maintenant possible de déterminer la dérive éventuelle de l?extrémité des flûtes (75 m) causée par des courants latéraux ou de petites variations de trajet du bateau. De plus, la construction de deux bras télescopiques maintenant les trois flûtes à une distance de 7.5 m les uns des autres, qui est la même distance que celle entre les lignes naviguées de la campagne II. En combinaison avec un espacement de récepteurs de 2.5 m, la dimension de chaque «bin» de données 3-D de la campagne II est de 1.25 m en ligne et 3.75 m latéralement. L?espacement plus grand en direction « in-line » par rapport à la direction «cross-line» est justifié par l?orientation structurale de la zone de faille perpendiculaire à la direction «in-line». L?incertitude sur la navigation et le positionnement pendant la campagne I et le «binning» imprécis qui en résulte, se retrouve dans les données sous forme d?une certaine discontinuité des réflecteurs. L?utilisation d?un canon à air à doublechambre (qui permet d?atténuer l?effet bulle) a pu réduire l?aliasing observé dans les sections migrées en 3-D. Celui-ci était dû à la combinaison du contenu relativement haute fréquence (<2000 Hz) du canon à eau (utilisé à 140 bars et à 0.3 m de profondeur) et d?un pas d?échantillonnage latéral insuffisant. Le Mini G.I 15/15 a été utilisé à 80 bars et à 1 m de profondeur, est mieux adapté à la complexité de la cible, une zone faillée ayant des réflecteurs pentés jusqu?à 30°. Bien que ses fréquences ne dépassent pas les 650 Hz, cette source combine une pénétration du signal non-aliasé jusqu?à 300 m dans le sol (par rapport au 145 m pour le canon à eau) pour une résolution verticale maximale de 1.1 m. Tandis que la campagne I a été acquise par groupes de plusieurs lignes de directions alternées, l?optimisation du temps d?acquisition du nouveau système à trois flûtes permet l?acquisition en géométrie parallèle, ce qui est préférable lorsqu?on utilise une configuration asymétrique (une source et un dispositif de récepteurs). Si on ne procède pas ainsi, les stacks sont différents selon la direction. Toutefois, la configuration de flûtes, plus courtes que pour la compagne I, a réduit la couverture nominale, la ramenant de 12 à 6. Une séquence classique de traitement 3-D a été adaptée à l?échantillonnage à haute fréquence et elle a été complétée par deux programmes qui transforment le format non-conventionnel de nos données de navigation en un format standard de l?industrie. Dans l?ordre, le traitement comprend l?incorporation de la géométrie, suivi de l?édition des traces, de l?harmonisation des «bins» (pour compenser l?inhomogénéité de la couverture due à la dérive du bateau et de la flûte), de la correction de la divergence sphérique, du filtrage passe-bande, de l?analyse de vitesse, de la correction DMO en 3-D, du stack et enfin de la migration 3-D en temps. D?analyses de vitesse détaillées ont été effectuées sur les données de couverture 12, une ligne sur deux et tous les 50 CMP, soit un nombre total de 600 spectres de semblance. Selon cette analyse, les vitesses d?intervalles varient de 1450-1650 m/s dans les sédiments non-consolidés et de 1650-3000 m/s dans les sédiments consolidés. Le fait que l?on puisse interpréter plusieurs horizons et surfaces de faille dans le cube, montre le potentiel de cette technique pour une interprétation tectonique et géologique à petite échelle en trois dimensions. On distingue cinq faciès sismiques principaux et leurs géométries 3-D détaillées sur des sections verticales et horizontales: les sédiments lacustres (Holocène), les sédiments glacio-lacustres (Pléistocène), la Molasse du Plateau, la Molasse Subalpine de la zone de faille (chevauchement) et la Molasse Subalpine au sud de cette zone. Les couches de la Molasse du Plateau et de la Molasse Subalpine ont respectivement un pendage de ~8° et ~20°. La zone de faille comprend de nombreuses structures très déformées de pendage d?environ 30°. Des tests préliminaires avec un algorithme de migration 3-D en profondeur avant sommation et à amplitudes préservées démontrent que la qualité excellente des données de la campagne II permet l?application de telles techniques à des campagnes haute-résolution. La méthode de sismique marine 3-D était utilisée jusqu?à présent quasi-exclusivement par l?industrie pétrolière. Son adaptation à une échelle plus petite géographiquement mais aussi financièrement a ouvert la voie d?appliquer cette technique à des objectifs d?environnement et du génie civil.<br/><br/>An efficient high-resolution three-dimensional (3-D) seismic reflection system for small-scale targets in lacustrine settings was developed. In Lake Geneva, near the city of Lausanne, Switzerland, past high-resolution two-dimensional (2-D) investigations revealed a complex fault zone (the Paudèze thrust zone), which was subsequently chosen for testing our system. Observed structures include a thin (<40 m) layer of subhorizontal Quaternary sediments that unconformably overlie southeast-dipping Tertiary Molasse beds and the Paudèze thrust zone, which separates Plateau and Subalpine Molasse units. Two complete 3-D surveys have been conducted over this same test site, covering an area of about 1 km2. In 1999, a pilot survey (Survey I), comprising 80 profiles, was carried out in 8 days with a single-streamer configuration. In 2001, a second survey (Survey II) used a newly developed three-streamer system with optimized design parameters, which provided an exceptionally high-quality data set of 180 common midpoint (CMP) lines in 9 days. The main improvements include a navigation and shot-triggering system with in-house navigation software that automatically fires the gun in combination with real-time control on navigation quality using differential GPS (dGPS) onboard and a reference base near the lake shore. Shots were triggered at 5-m intervals with a maximum non-cumulative error of 25 cm. Whereas the single 48-channel streamer system of Survey I requires extrapolation of receiver positions from the boat position, for Survey II they could be accurately calculated (error <20 cm) with the aid of three additional dGPS antennas mounted on rafts attached to the end of each of the 24- channel streamers. Towed at a distance of 75 m behind the vessel, they allow the determination of feathering due to cross-line currents or small course variations. Furthermore, two retractable booms hold the three streamers at a distance of 7.5 m from each other, which is the same distance as the sail line interval for Survey I. With a receiver spacing of 2.5 m, the bin dimension of the 3-D data of Survey II is 1.25 m in in-line direction and 3.75 m in cross-line direction. The greater cross-line versus in-line spacing is justified by the known structural trend of the fault zone perpendicular to the in-line direction. The data from Survey I showed some reflection discontinuity as a result of insufficiently accurate navigation and positioning and subsequent binning errors. Observed aliasing in the 3-D migration was due to insufficient lateral sampling combined with the relatively high frequency (<2000 Hz) content of the water gun source (operated at 140 bars and 0.3 m depth). These results motivated the use of a double-chamber bubble-canceling air gun for Survey II. A 15 / 15 Mini G.I air gun operated at 80 bars and 1 m depth, proved to be better adapted for imaging the complexly faulted target area, which has reflectors dipping up to 30°. Although its frequencies do not exceed 650 Hz, this air gun combines a penetration of non-aliased signal to depths of 300 m below the water bottom (versus 145 m for the water gun) with a maximum vertical resolution of 1.1 m. While Survey I was shot in patches of alternating directions, the optimized surveying time of the new threestreamer system allowed acquisition in parallel geometry, which is preferable when using an asymmetric configuration (single source and receiver array). Otherwise, resulting stacks are different for the opposite directions. However, the shorter streamer configuration of Survey II reduced the nominal fold from 12 to 6. A 3-D conventional processing flow was adapted to the high sampling rates and was complemented by two computer programs that format the unconventional navigation data to industry standards. Processing included trace editing, geometry assignment, bin harmonization (to compensate for uneven fold due to boat/streamer drift), spherical divergence correction, bandpass filtering, velocity analysis, 3-D DMO correction, stack and 3-D time migration. A detailed semblance velocity analysis was performed on the 12-fold data set for every second in-line and every 50th CMP, i.e. on a total of 600 spectra. According to this velocity analysis, interval velocities range from 1450-1650 m/s for the unconsolidated sediments and from 1650-3000 m/s for the consolidated sediments. Delineation of several horizons and fault surfaces reveal the potential for small-scale geologic and tectonic interpretation in three dimensions. Five major seismic facies and their detailed 3-D geometries can be distinguished in vertical and horizontal sections: lacustrine sediments (Holocene) , glaciolacustrine sediments (Pleistocene), Plateau Molasse, Subalpine Molasse and its thrust fault zone. Dips of beds within Plateau and Subalpine Molasse are ~8° and ~20°, respectively. Within the fault zone, many highly deformed structures with dips around 30° are visible. Preliminary tests with 3-D preserved-amplitude prestack depth migration demonstrate that the excellent data quality of Survey II allows application of such sophisticated techniques even to high-resolution seismic surveys. In general, the adaptation of the 3-D marine seismic reflection method, which to date has almost exclusively been used by the oil exploration industry, to a smaller geographical as well as financial scale has helped pave the way for applying this technique to environmental and engineering purposes.<br/><br/>La sismique réflexion est une méthode d?investigation du sous-sol avec un très grand pouvoir de résolution. Elle consiste à envoyer des vibrations dans le sol et à recueillir les ondes qui se réfléchissent sur les discontinuités géologiques à différentes profondeurs et remontent ensuite à la surface où elles sont enregistrées. Les signaux ainsi recueillis donnent non seulement des informations sur la nature des couches en présence et leur géométrie, mais ils permettent aussi de faire une interprétation géologique du sous-sol. Par exemple, dans le cas de roches sédimentaires, les profils de sismique réflexion permettent de déterminer leur mode de dépôt, leurs éventuelles déformations ou cassures et donc leur histoire tectonique. La sismique réflexion est la méthode principale de l?exploration pétrolière. Pendant longtemps on a réalisé des profils de sismique réflexion le long de profils qui fournissent une image du sous-sol en deux dimensions. Les images ainsi obtenues ne sont que partiellement exactes, puisqu?elles ne tiennent pas compte de l?aspect tridimensionnel des structures géologiques. Depuis quelques dizaines d?années, la sismique en trois dimensions (3-D) a apporté un souffle nouveau à l?étude du sous-sol. Si elle est aujourd?hui parfaitement maîtrisée pour l?imagerie des grandes structures géologiques tant dans le domaine terrestre que le domaine océanique, son adaptation à l?échelle lacustre ou fluviale n?a encore fait l?objet que de rares études. Ce travail de thèse a consisté à développer un système d?acquisition sismique similaire à celui utilisé pour la prospection pétrolière en mer, mais adapté aux lacs. Il est donc de dimension moindre, de mise en oeuvre plus légère et surtout d?une résolution des images finales beaucoup plus élevée. Alors que l?industrie pétrolière se limite souvent à une résolution de l?ordre de la dizaine de mètres, l?instrument qui a été mis au point dans le cadre de ce travail permet de voir des détails de l?ordre du mètre. Le nouveau système repose sur la possibilité d?enregistrer simultanément les réflexions sismiques sur trois câbles sismiques (ou flûtes) de 24 traces chacun. Pour obtenir des données 3-D, il est essentiel de positionner les instruments sur l?eau (source et récepteurs des ondes sismiques) avec une grande précision. Un logiciel a été spécialement développé pour le contrôle de la navigation et le déclenchement des tirs de la source sismique en utilisant des récepteurs GPS différentiel (dGPS) sur le bateau et à l?extrémité de chaque flûte. Ceci permet de positionner les instruments avec une précision de l?ordre de 20 cm. Pour tester notre système, nous avons choisi une zone sur le Lac Léman, près de la ville de Lausanne, où passe la faille de « La Paudèze » qui sépare les unités de la Molasse du Plateau et de la Molasse Subalpine. Deux campagnes de mesures de sismique 3-D y ont été réalisées sur une zone d?environ 1 km2. Les enregistrements sismiques ont ensuite été traités pour les transformer en images interprétables. Nous avons appliqué une séquence de traitement 3-D spécialement adaptée à nos données, notamment en ce qui concerne le positionnement. Après traitement, les données font apparaître différents faciès sismiques principaux correspondant notamment aux sédiments lacustres (Holocène), aux sédiments glacio-lacustres (Pléistocène), à la Molasse du Plateau, à la Molasse Subalpine de la zone de faille et la Molasse Subalpine au sud de cette zone. La géométrie 3-D détaillée des failles est visible sur les sections sismiques verticales et horizontales. L?excellente qualité des données et l?interprétation de plusieurs horizons et surfaces de faille montrent le potentiel de cette technique pour les investigations à petite échelle en trois dimensions ce qui ouvre des voies à son application dans les domaines de l?environnement et du génie civil.

The effects of productivity on profitability: a case study at firm level using an activity-based costing approach

Productivity and profitability are important concepts and measures describing the performance and success of a firm. We know that increase in productivity decreases the costs per unit produced and leads to better profitability. This common knowledge is not, however, enough in the modern business environment. Productivity improvement is one means among others for increasing the profitability of actions. There are many means to increase productivity. The use of these means presupposes operative decisions and these decisions presuppose informationabout the effects of these means. Productivity improvement actions are in general made at floor level with machines, cells, activities and human beings. Profitability is most meaningful at the level of the whole firm. It has been very difficult or even impossible to analyze closely enough the economical aspects of thechanges at floor level with the traditional costing systems. New ideas in accounting have only recently brought in elements which make it possible to considerthese phenomena where they actually happen. The aim of this study is to supportthe selection of objects to productivity improvement, and to develop a method to analyze the effects of the productivity change in an activity on the profitability of a firm. A framework for systemizing the economical management of productivity improvement is developed in this study. This framework is a systematical way with two stages to analyze the effects of productivity improvement actions inan activity on the profitability of a firm. At the first stage of the framework, a simple selection method which is based on the worth, possibility and the necessity of the improvement actions in each activity is presented. This method is called Urgency Analysis. In the second stage it is analyzed how much a certain change of productivity in an activity affects the profitability of a firm. A theoretical calculation model with which it is possible to analyze the effects of a productivity improvement in monetary values is presented. On the basis of this theoretical model a tool is made for the analysis at the firm level. The usefulness of this framework was empirically tested with the data of the profit center of one medium size Finnish firm which operates in metal industry. It is expressedthat the framework provides valuable information about the economical effects of productivity improvement for supporting the management in their decision making.

The effects of potentiallydisruptive technology on business model - a case study of new technologies in ICT industry

This study examines how firms interpret new, potentially disruptive technologies in their own strategic context. The work presents a cross-case analysis of four potentially disruptive technologies or technical operating models: Bluetooth, WLAN, Grid computing and Mobile Peer-to-peer paradigm. The technologies were investigated from the perspective of three mobile operators, a device manufacturer and a software company in the ICT industry. The theoretical background for the study consists of the resource-based view of the firm with dynamic perspective, the theories on the nature of technology and innovations, and the concept of business model. The literature review builds up a propositional framework for estimating the amount of radical change in the companies' business model with two middle variables, the disruptiveness potential of a new technology, and the strategic importance of a new technology to a firm. The data was gathered in group discussion sessions in each company. The results of each case analysis were brought together to evaluate, how firms interpret the potential disruptiveness in terms of changes in product characteristics and added value, technology and market uncertainty, changes in product-market positions, possible competence disruption and changes in value network positions. The results indicate that the perceived disruptiveness in terms ofproduct characteristics does not necessarily translate into strategic importance. In addition, firms did not see the new technologies as a threat in terms of potential competence disruption.

Object-oriented development of client / server application: case study of service control software

Tässä työssä on esitetty sen ohjelmiston kehittämisen prosessi, joka on tarkoitettu annettavien palveluiden valvottavaksi käyttäen prototyyppimallia. Raportti sisältää vaatimusten, kohteisiin suunnatun analyysin ja suunnittelun, realisointiprosessien kuvauksen ja prototyypin testauksen. Ohjelmiston käyttöala – antavien palveluiden valvonta. Vaatimukset sovellukselle analysoitiin ohjelmistomarkkinoiden perusteella sekä ohjelmiston engineeringin periaatteiden mukaisesti. Ohjelmiston prototyyppi on realisoitu käyttäen asiakas-/palvelinhybridimallia sekä ralaatiokantaa. Kehitetty ohjelmisto on tarkoitettu venäläisille tietokonekerhoille, jotka erikoistuvat pelipalvelinten antamiseen.