881 resultados para Características físico-químicas


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Neste estudo, foram analisados os efeitos da anoxia ambiental (8 h) e de diferentes períodos de reoxigenação (20 e 40 min.) sobre o balanço oxidativo nas brânquias do caranguejo Chasmagnathus granulata. A exposição à anoxia causou no tecido branquial um aumento na atividade das enzimas CAT e GST, e uma diminuição na atividade da SOD. As enzimas estudadas tendem a retornar aos níveis de controle durante a recuperação. A atividade destas enzimas parecem responder diretamente às variações na concentração do oxigênio ambiental. As BP apresentaram uma maior atividade das enzimas antioxidantes do que as BA. Nos tecidos analisados, as defesas antioxidantes não-enzimáticas (TRAP) não apresentaram nenhuma alteração a exposição a anoxia. Contudo, durante a recuperação observou-se um aumento no TRAP em ambos os tecidos. A exposição a anoxia não causou nenhuma alteração na lipoperoxidação (DC e TBA-RS), nos tecidos analisados. Entretanto, durante a recuperação observou-se uma diminuição nos níveis de DC, seguido de um aumento nos níveis de TBA-RS. Os resultados deste estudo, demonstram que o C. granulata ,assim como, outras espécies intertidais apresenta adaptações em seus sistemas de defesa antioxidantes, que o capacitam a ocupar e a manter-se em ambientes com extremas variações das características físico-químicas, como os estuários.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The dams are limnic ecosystems of great importance for its multiple uses, among them, water supply for the public and to culture of artisanal fish are most relevant. The aim of the present study is to evaluate the physical-chemical characteristics and the phytoplankton community in two chosen sites (Point 1 littoral zone of point source; Point 2 pelagic zone of non-point source) of the Minister João Alves dam, which is also known as Boqueirão de Parelhas/RN. This represents the spatial distribution of the phytoplankton species in order to understand any possible alterations of the water quality and the phytoplankton composition in relation to the water quality originating from the impact of the tilapia, Oreochromis niloticus, culture. The study period also encompasses temporal variations exhibited in two seasons of an annual cycle, one during the dry season (Oct, Nov and Dec of 2008 and Jan of 2009), and the other rainy season (Mar, Apr, May and June of 2008) to extend the observation. The physicalchemical parameters, such as pH, temperature, electrical conductivity, concentration of dissolved oxygen were measured in situ and the values of the inorganic nutrients (nitrate, ammonium and orto-phosfato) and chlorophyll in the laboratory. The quali-quantitative analyses of the phytoplankton had been carried through sedimentation technique and the enumeration of the random of 400 cells, colonies and filaments counted using Sedgwick-Rafter counting chamber. The results of pH varied widely from the acidic to alkaline range with the minimum of 5.8 (± 0.8) and the maximum of 9.2 (± 0.7-0.8), at point 1 and 2. The dissolved oxygen content was higher in the rainy period than that in the dry period. The maximum electrical conductivity was of 1409 μScm-1 in point 1 and 431 minim of μScm-1, in point 2. There was a considerable alteration in the levels of inorganic nutrients such as nitrate-nitrogen, ammoniacal nitrogen and orthophosphate during the two cycles of study period. Phytoplankton assemblages presented a picture of alternate dominance among species Cyanobacteria, Bacillariophyceae and Chlorophyceae. The trophic state index diagnosed to the category of mesotrophic, which is based on the values of chlorophyll, total phosphorus and Secchi-disc measurements. The wind driven turbulence of the water column and the fresh inflow of water (flushing and dilution) during rainy season acted as constraint and did-not allow an exaggerated growth of the species of cyanobacteria. On the basis of the present we conclude that the culture of tilapias in cage-culture fails to produce pollution load that could compromise the quality of the water of the dam, probably be due to small dimension of the culture in relation to the size, volume of the water and the reservoir capacity support its own environment

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Disfunções envolvendo o sistema nervoso são de grande importância na Medicina Veterinária, pois tratam-se de enfermidades de elevada incidência e com poucos subsídios auxiliares no seu diagnóstico, prognóstico e na avaliação de terapias empregadas. Ainda hoje, o diagnóstico baseia-se, em grande parte, no histórico e no exame clínico neurológico. Dessa forma, a análise dos constituintes do fluido cefalorraquidiano torna-se uma das poucas alternativas de acesso clínico ao sistema nervoso central (SNC). Mesmo com a grande utilidade do exame físico-químico e citoscópico do liquor na neurologia veterinária, poucos são os estudos sobre a estabilidade dos seus constituintes sob estocagem. Dessa forma, o presente trabalho teve como finalidade verificar a influência da temperatura e do tempo de conservação nas características físico-químicas do liquor de cães hígidos. Para tanto, foram coletadas amostras de LCR, através da punção da cisterna cerebelo-medular de cães clinicamente sadios, as quais foram submetidas à análise da densidade específica, do pH, da glicorraquia, das proteínas totais e das atividades das enzimas creatina quinase (CK) e aspartato aminotransferase (AST), após conservá-las em diferentes temperaturas (25°C, 4°C e -4°C) e por diferentes períodos de tempo (logo após a colheita, 24 horas, 48 horas, uma semana e um mês). Dentre os resultados obtidos, foi possível verificar, principalmente, que houve estabilidade dos parâmetros estudados por até um mês de estocagem nas amostras mantidas sob a temperaturas de congelamento de -4°C.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

It s more and more evident the subject of the shortage of water, worsened by the accelerated urbanization, growth of the population, increase of the demand and of the costs of its treatment, factors that are also tied up to the increase of the consumption of mineral waters, whose chemical composition or physical-chemistries characteristics do with that are considered beneficial to the health. The growth accelerated all over the world in its consumption aims the concern with the waters quality, the health and the incentive to the consumption of natural products. However, in spite of quite valuable, that resource is explored, most of the time, without optimization of production or actions that avoid wastefulness. This research is justified for the need of minimizing the negative environmental impacts caused by the mineral water s production, mainly in what it say about the generation of effluents and wastes in the productive process, through the study, development and application of cleaner production tools for the environmental management, pertinent for that section. The applicability of Environmental Management System was determined by means of the characterization of the environmental aspects of productive process in a company of the section, in the state of Rio Grande do Norte and of the discussion of the panoramas that demonstrate the tendency for a sustainable development. Actions as a reforestation, optimization of energy and water uses, recycle of solid residues and water reuse were applied during the research, resulting in the considerable reduction of wastes of raw materials and inputs and consequent environmental and economic won. A specific methodology was proposed with concepts of Environmental Management, integrating with Quality Management. As foundations for the elaboration of the methodology, it was realized a similarity analysis among the systems and, mainly, an analysis of the experiences observed in the case study, including specificities, needs and difficulties of the company. With these results, the implantation of a EMS as a company strategy has environmental, economic and social benefits, and this research can be applied and adequate to others companies and sectors

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo nesta pesquisa foi avaliar o potencial de crescimento, desempenho zootécnico e as características de rendimento da carcaça, das partes e dos órgãos e a qualidade da carne de três linhagens de frango de corte: Cobb (CB), Paraíso Pedrês (PP) e ISA Label (IL). O delineamento foi inteiramente casualizado, com cinco repetições de 29 aves por tratamento. Semanalmente, com os dados obtidos para peso corporal médio, foi descrito o crescimento das aves, utilizando-se a equação de Gompertz e, com sua derivada, foi obtida a taxa de crescimento das aves. Três aves de cada repetição foram selecionadas e abatidas para análises do rendimento da carcaça, das partes e dos órgãos. As características físico-químicas da carne foram avaliadas utilizando-se o peito de duas destas aves. As aves CB apresentaram maior potencial de crescimento e, entre as caipiras o maior potencial foi observado para PP. Quanto ao desempenho, observou-se que a linhagem CB apresentou maior ganho de peso e consumo de ração, seguida pelas aves PP e IL. Maiores rendimentos de carcaça, de peito, sobrecoxa, fígado, intestinos e proventrículo foram obtidos com as aves CB em relação às caipiras, que não diferiram entre si. As aves CB apresentaram carne de peito com maior pH e maior capacidade de retenção de água que as de linhagens caipiras, que apresentaram carne de peito menos macia e com maior intensidade da cor vermelha. Maior potencial de crescimento e maiores rendimentos de pés, coxa, coxa+sobrecoxa e de coração foram verificados nos machos, enquanto, nas fêmeas, maiores rendimentos de peito, porcentagem de gordura abdominal, fígado, moela e proventrículo. As aves CB em relação às caipiras possuíram maior potencial de crescimento e maior rendimento de partes nobres, mas as caipiras apresentaram atributos diferenciados que justificam sua criação.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar o efeito da irradiação gama associada à atmosfera modificada passiva na qualidade pós-colheita de goiabas 'Pedro Sato', verificando suas características físico-químicas. Foram utilizadas goiabas provenientes da região de Vista Alegre do Alto-SP,Brasil. Após a colheita, as goiabas foram imediatamente transportadas ao Laboratório de Frutas e Hortaliças, pertencente ao Departamento de Gestão e Tecnologia Agroindustrial, da Faculdade de Ciências Agronômicas - UNESP - Câmpus de Botucatu-SP, onde foram armazenadas a 10ºC e 90-95%UR, em câmara frigorífica, por 28 dias. Os tratamentos foram: controle 1 (sem embalagem e sem irradiação); controle 2 (embalagem de poliestireno (PS) + polietileno de baixa densidade (PEBD) e sem irradiação); tratamento 1 (PS+PEBD e 0,2kGy); tratamento 2 (PS+PEBD e 0,6kGy), e tratamento 3 (PS+PEBD e 1,0kGy). As análises realizadas foram: firmeza, sólidos solúveis (SS), acidez titulável (AT) e índice de maturação. Foi utilizado o delineamento inteiramente casualizado, com esquema fatorial 5 x 5 (tratamento x tempo). Concluiu-se que as altas doses de irradiação promoveram efeito negativo nas características físico-químicas da goiaba 'Pedro Sato', e que apenas a menor dose utilizada (0,2kGy) associada à atmosfera modificada conservou frutos com maior qualidade e aceitabilidade, indicado por maiores índice de maturação e teor de sólidos solúveis obtidos.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A capacidade antioxidante e a qualidade pós-colheita do abacate 'Fuerte' foram avaliadas. Os frutos foram mantidos sob temperatura ambiente (24 ± 1 ºC) e sob refrigeração em 10 ± 1 ºC e 90±5% UR e avaliados durante 15 dias. Determinaram-se a perda de massa e a taxa respiratória. As características físico-químicas avaliadas foram acidez total titulável (AT), sólidos solúveis (SS), ratio, pH, firmeza, atividade da enzima polifenoloxidase (PPO), cor (L, a* e b*), fenólicos totais e atividade antioxidante (AA) por DPPH·. Nas duas condições de armazenamento, o pico respiratório ocorreu no 9º dia.Os frutos mantidos sob temperatura refrigerada apresentaram menor perda de massa e maior firmeza em relação àqueles em temperatura ambiente. O comportamento respiratório refletiu na redução dos valores de AT e no conteúdo de SS que diminuíram a partir do pico de respiração. Os valores de pH aumentaram como consequência da diminuição da AT. Os valores de luminosidade mantiveram-se elevados, observando-se diminuição do componente de cor verde na polpa com o armazenamento. A atividade da PPO diminuiu com o armazenamento. Os valores de AA variaram de 17,6 a 68,7%. O conteúdo de fenólicos totais diminuiu após o pico respiratório, e valores crescentes de AA foram observados mesmo após o 9º dia.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O trabalho foi realizado em um pomar comercial de pêssego da cultivar Aurora 2, de três anos de idade, conduzida em sistema de vaso moderno e espaçamento de 6 x 4 m. O delineamento experimental foi em blocos casualizados, utilizando-se de 15 tratamentos, 8 repetições e 16 frutos por tratamento. Os tratamentos foram os seguintes: T1 - Sacolas de TNT branco de 45 gramaturas por m² (45G/m², fechado; T2 - Sacolas de TNT branco de 45 gramaturas por m² (45G/m²) aberto; T3 - Sacolas de TNT branco de 20 gramaturas por m² (20G/m²) fechado; T4 - Sacolas de TNT branco de 20 gramaturas por m² (20G/m²) aberto; T5 - Sacolas de polipropileno microperfurado transparente (furos de 1mm) fechado; T6 - Sacolas de polipropileno microperfurado transparente (furos de 1mm) aberto; T7 - Sacolas de polipropileno microperfurado transparente (furos de 2mm) fechado; T8 - Sacolas de polipropileno microperfurado transparente (furos de 2mm) aberto; T9 - Sacolas de polietileno microperfurado leitoso (furos de 1mm) fechado; T10 Sacolas de polietileno microperfurado leitoso (furos de 1mm) aberto; T11 Sacolas de polietileno microperfurado leitoso (furos de 2mm) fechado; T12 - Sacolas de polietileno microperfurado leitoso (furos de 2mm) aberto; T13 - Sacolas de papel impermeável fechado; T14 - Sacolas de papel impermeável aberto; T15 - Testemunha (sem ensacamento). As sacolas de TNT (Tecido-não-Tecido) e as de papel impermeável tinham as dimensões de 11,5 x 15,0 cm, e as de polipropileno microperfurado, de 13,0 x 20,0 cm. Os resultados obtidos permitiram concluir que as embalagens de polipropileno transparentes podem ser empregadas para o ensacamento de frutos de pessegueiro, uma vez que as mesmas possibilitam a visualização da coloração dos frutos no momento da colheita, não comprometem o desenvolvimento da coloração dos mesmos e apresentam facilidade no manuseio.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar as características físico-químicas, a qualidade nutricional e a suscetibilidade ao esverdeamento pós-colheita de tubérculos de cultivares de batata. Utilizou-se o delineamento experimental de blocos ao acaso, com cinco repetições. Os tratamentos consistiram de 11 cultivares (Ágata, Ambra, Annabelle, Asterix, Atlantic, Cupido, Daisy, Fontane, Innovator, Markies e Voyager). As cultivares Ágata, Ambra, Annabelle, Cupido e Voyager apresentam tubérculos com polpa de menor firmeza (6,82 a 8,25 N) e baixos teores de matéria seca (14,46 a 17,57%), carboidratos (10,97 a 12,51%) e amido (10,21 a 12,26%), adequados para o mercado fresco, a preparação de massas e o uso culinário. Já as cultivares Atlantic, Fontane e Innovator apresentam polpa firme (9,14 a 9,55 N) e elevados teores de matéria seca (19,68 a 21,63%), carboidratos (14,49 a 15,90%) e amido (14,29 a 15,74%), adequados para fritura. As cultivares Asterix e Markies apresentam teores intermediários dessas características e são indicadas para o preparo de massas e fritura. As cultivares Innovator e Markies apresentam melhor qualidade nutricional, com elevados teores de minerais (P, K, Mg, Cu e Mn) e de proteína, enquanto as cultivares Ágata e Ambra apresentam menor qualidade nutricional e proteica. A cultivar Voyager apresenta maior esverdeamento pós-colheita que as cultivares Annabelle, Fontane, Markies, Ambra e Atlantic.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Brazil, one of the largest agricultural producers in the world, has managed in recent years to significantly improve its production. However, in response to this advance in the agro-industrial sector, the generation of agro-industrial residues has also increased. New technological alternatives have to be implemented in order to bring economic and rational use of this material and drying is one of the possible choices. Considering the great importance that bioactive compounds present for food science and technology, this research aims to evaluate the air-drying process of acerola residue in a tray convective drier under controlled temperature (60, 70 e 80ºC), air velocity (4.0, 5.0 e 6.0 m/s) and material width (0.5, 0.62 e 0.75 cm) by applying an experimental planning 23 + 3. Based on that, the impact on physical-chemical characteristics, color, bioactive compounds concentration and antioxidant activity of dried acerola waste was evaluated, having the in natura and freeze dried waste as control groups. Dried acerola residue presented natural pigments, mainly carotenoids (143.68 - 68.29 mg/g) and anthocyanins (290.92 - 90.11 mg/100 g), which explain the red and yellow instrumental color parameters observed. The acerola residue powder is also rich in phenolic compounds (3261.11 -2692.60 mgGAEeq/100g), proanthocyanidins (61.33-58.46 eq/100g), ascorbic acid (389.44 739.29 mg/100 g) and DPPH antioxidant activity (20.91 24.72 μg Trolox eq/g). Results show decreased concentration of phenolic compounds, anthocyanins, carotenoids, proanthocyanidins and ascorbic acid caused by the air-drying process. However, even after the observed drying losses, the acerola residue powder can be considered a high value food ingredient, considering the high bioactive compounds concentration found in the final product, as well as the colorimetric characterization and microbiological stability of the dried powder