Étude paléopathologique préliminaire à travers l'analyse macroscopique et scanographique : exemple du cimetière St. Matthew, ville de Québec (1771-1860)

Sachant que plusieurs maladies entrainent des lésions qui ne sont pas toujours observables à l’oeil, cette étude préliminaire en paléopathologie humaine utilise une approche complémentaire issue de l’imagerie médicale, le ct-scan, afin de fournir des diagnostics plus précis. L’objectif est donc de tester ici l’efficacité et les limites de l’analyse scanographique durant l’analyse de spécimens archéologiques. Un échantillon de 55 individus a été sélectionné à partir de la collection ostéologique provenant du cimetière protestant St. Matthew (ville de Québec, 1771 – 1860). Une analyse macroscopique et scanographique complète a alors été effectuée sur chaque squelette. Les observations macroscopiques ont consisté à enregistrer une dizaine de critères standardisés par la littérature de référence en lien avec des manifestations anormales à la surface du squelette. Les ct-scans ont été réalisés à l’Institut National de la Recherche Scientifique de la Ville de Québec avec un tomodensitomètre Somatom de Siemens (définition AS+ 128). Les données scanographiques ont permis d’enregistrer une série de critères complémentaires sur la structure interne de l’os (amincissement/épaississement de la corticale, variation de densité, etc.) Selon la méthode du diagnostic différentiel, des hypothèses ou diagnostics ont été proposés. Ils sont principalement basés sur les critères diagnostiques mentionnés dans les manuels de référence en paléopathologie, mais aussi à l’aide de la littérature clinique et l’expertise de médecins. Les résultats présentés ici supportent que: 1) Dans 43% des cas, les données scanographiques ont apporté des informations essentielles dans la diagnose pathologique. Cette tendance se confirme en fonction de certaines maladies, mais pas d’autres, car certains diagnostics ne peuvent se faire sans la présence de tissus mous. 2) La distribution spatiale de la plupart des lésions varie selon les régions anatomiques, aussi bien en macroscopie qu’en scanographie. 3) Certains types de maladie semblent associés à l’âge et au sexe, ce qui est conforté par la littérature. 4) Cette recherche démontre aussi que le processus de diagnose nécessite, dans 38% des cas, une analyse complémentaire (ex. histologie, scintigraphie, radiographie) pour préciser le diagnostic final.

Variations développementales chez les poissons hybrides clonaux Chrosomus eos-neogaeus : transgressions phénotypiques en 3D

Le succès écologique des organismes dépend principalement de leur phénotype. Une composante important du phénotype est la morphologie fonctionnelle car elle influence la performance d’un organisme donné dans un milieu donné et donc reflète son écologie. Des disparités dans la morphologie fonctionnelle ou dans le développement entre espèces peuvent donc mener à des différences écologiques. Ce projet évalue le rôle des mécanismes de variation morphologique dans la production de différences écologiques entre espèces au sein des poissons hybrides du complexe Chrosomus eos-neogaeus. En utilisant la microtomodensitométrie à rayons X et la morphométrie géométrique 3D, la forme des éléments des mâchoires est décrite pour comparer la variation morphologique et les différences développementales entre les membres du complexe C. eos neogaeus. Les hybrides présentent autant de variation phénotypique que les espèces parentales et présentent des phénotypes nouveaux, dit transgressifs. Les hybrides présentent aussi des différences marquées avec les espèces parentales dans leur allométrie et dans leur intégration phénotypique. Finalement, ceux-ci semblent être plastiques et en mesure de modifier leur phénotype pour occuper plusieurs environnements. L’entièreté de ces résultats suggère que des changements dans le développement des hybrides entraînent une différenciation phénotypique et écologique avec les espèces parentales.

Étude paléopathologique préliminaire à travers l'analyse macroscopique et scanographique : exemple du cimetière St. Matthew, ville de Québec (1771-1860)

Sachant que plusieurs maladies entrainent des lésions qui ne sont pas toujours observables à l’oeil, cette étude préliminaire en paléopathologie humaine utilise une approche complémentaire issue de l’imagerie médicale, le ct-scan, afin de fournir des diagnostics plus précis. L’objectif est donc de tester ici l’efficacité et les limites de l’analyse scanographique durant l’analyse de spécimens archéologiques. Un échantillon de 55 individus a été sélectionné à partir de la collection ostéologique provenant du cimetière protestant St. Matthew (ville de Québec, 1771 – 1860). Une analyse macroscopique et scanographique complète a alors été effectuée sur chaque squelette. Les observations macroscopiques ont consisté à enregistrer une dizaine de critères standardisés par la littérature de référence en lien avec des manifestations anormales à la surface du squelette. Les ct-scans ont été réalisés à l’Institut National de la Recherche Scientifique de la Ville de Québec avec un tomodensitomètre Somatom de Siemens (définition AS+ 128). Les données scanographiques ont permis d’enregistrer une série de critères complémentaires sur la structure interne de l’os (amincissement/épaississement de la corticale, variation de densité, etc.) Selon la méthode du diagnostic différentiel, des hypothèses ou diagnostics ont été proposés. Ils sont principalement basés sur les critères diagnostiques mentionnés dans les manuels de référence en paléopathologie, mais aussi à l’aide de la littérature clinique et l’expertise de médecins. Les résultats présentés ici supportent que: 1) Dans 43% des cas, les données scanographiques ont apporté des informations essentielles dans la diagnose pathologique. Cette tendance se confirme en fonction de certaines maladies, mais pas d’autres, car certains diagnostics ne peuvent se faire sans la présence de tissus mous. 2) La distribution spatiale de la plupart des lésions varie selon les régions anatomiques, aussi bien en macroscopie qu’en scanographie. 3) Certains types de maladie semblent associés à l’âge et au sexe, ce qui est conforté par la littérature. 4) Cette recherche démontre aussi que le processus de diagnose nécessite, dans 38% des cas, une analyse complémentaire (ex. histologie, scintigraphie, radiographie) pour préciser le diagnostic final.

Variations développementales chez les poissons hybrides clonaux Chrosomus eos-neogaeus : transgressions phénotypiques en 3D

Le succès écologique des organismes dépend principalement de leur phénotype. Une composante important du phénotype est la morphologie fonctionnelle car elle influence la performance d’un organisme donné dans un milieu donné et donc reflète son écologie. Des disparités dans la morphologie fonctionnelle ou dans le développement entre espèces peuvent donc mener à des différences écologiques. Ce projet évalue le rôle des mécanismes de variation morphologique dans la production de différences écologiques entre espèces au sein des poissons hybrides du complexe Chrosomus eos-neogaeus. En utilisant la microtomodensitométrie à rayons X et la morphométrie géométrique 3D, la forme des éléments des mâchoires est décrite pour comparer la variation morphologique et les différences développementales entre les membres du complexe C. eos neogaeus. Les hybrides présentent autant de variation phénotypique que les espèces parentales et présentent des phénotypes nouveaux, dit transgressifs. Les hybrides présentent aussi des différences marquées avec les espèces parentales dans leur allométrie et dans leur intégration phénotypique. Finalement, ceux-ci semblent être plastiques et en mesure de modifier leur phénotype pour occuper plusieurs environnements. L’entièreté de ces résultats suggère que des changements dans le développement des hybrides entraînent une différenciation phénotypique et écologique avec les espèces parentales.

Software for Designing Custom Orbital-Craniofacial Implant Plans

Purpose: Custom cranio-orbital implants have been shown to achieve better performance than their hand-shaped counterparts by restoring skull anatomy more accurately and by reducing surgery time. Designing a custom implant involves reconstructing a model of the patient's skull using their computed tomography (CT) scan. The healthy side of the skull model, contralateral to the damaged region, can then be used to design an implant plan. Designing implants for areas of thin bone, such as the orbits, is challenging due to poor CT resolution of bone structures. This makes preoperative design time-intensive since thin bone structures in CT data must be manually segmented. The objective of this thesis was to research methods to accurately and efficiently design cranio-orbital implant plans, with a focus on the orbits, and to develop software that integrates these methods. Methods: The software consists of modules that use image and surface restoration approaches to enhance both the quality of CT data and the reconstructed model. It enables users to input CT data, and use tools to output a skull model with restored anatomy. The skull model can then be used to design the implant plan. The software was designed using 3D Slicer, an open-source medical visualization platform. It was tested on CT data from thirteen patients. Results: The average time it took to create a skull model with restored anatomy using our software was 0.33 hours ± 0.04 STD. In comparison, the design time of the manual segmentation method took between 3 and 6 hours. To assess the structural accuracy of the reconstructed models, CT data from the thirteen patients was used to compare the models created using our software with those using the manual method. When registering the skull models together, the difference between each set of skulls was found to be 0.4 mm ± 0.16 STD. Conclusions: We have developed a software to design custom cranio-orbital implant plans, with a focus on thin bone structures. The method described decreases design time, and is of similar accuracy to the manual method.

A feasibility study of multislice x-ray CT imaging of gel dosimeters using the “zero scan” method

This study extends the ‘zero scan’ method for CT imaging of polymer gel dosimeters to include multi-slice acquisitions. Multi slice CT images consisting of 24 slices of 1.2 mm thickness were acquired of an irradiated polymer gel dosimeter, and processed with the zero scan technique. The results demonstrate that zero scan based gel readout can be successfully applied to generate a three dimensional image of the irradiated gel field. Compared to the raw CT images the processed figures and cross gel profiles demonstrated reduced noise and clear visibility of the penumbral region. Moreover these improved results further highlight the suitability of this method in volumetric reconstruction with reduced CT data acquisition per slice. This work shows that 3D volumes of irradiated polymer gel dosimeters can be acquired and processed with x-ray CT.

Reducing CT radiation dose with iterative reconstruction algorithms: the influence of scan and reconstruction parameters on image quality and CTDIvol

OBJECTIVES In this phantom CT study, we investigated whether images reconstructed using filtered back projection (FBP) and iterative reconstruction (IR) with reduced tube voltage and current have equivalent quality. We evaluated the effects of different acquisition and reconstruction parameter settings on image quality and radiation doses. Additionally, patient CT studies were evaluated to confirm our phantom results. METHODS Helical and axial 256 multi-slice computed tomography scans of the phantom (Catphan(®)) were performed with varying tube voltages (80-140kV) and currents (30-200mAs). 198 phantom data sets were reconstructed applying FBP and IR with increasing iterations, and soft and sharp kernels. Further, 25 chest and abdomen CT scans, performed with high and low exposure per patient, were reconstructed with IR and FBP. Two independent observers evaluated image quality and radiation doses of both phantom and patient scans. RESULTS In phantom scans, noise reduction was significantly improved using IR with increasing iterations, independent from tissue, scan-mode, tube-voltage, current, and kernel. IR did not affect high-contrast resolution. Low-contrast resolution was also not negatively affected, but improved in scans with doses <5mGy, although object detectability generally decreased with the lowering of exposure. At comparable image quality levels, CTDIvol was reduced by 26-50% using IR. In patients, applying IR vs. FBP resulted in good to excellent image quality, while tube voltage and current settings could be significantly decreased. CONCLUSIONS Our phantom experiments demonstrate that image quality levels of FBP reconstructions can also be achieved at lower tube voltages and tube currents when applying IR. Our findings could be confirmed in patients revealing the potential of IR to significantly reduce CT radiation doses.

Ultra-low-dose dual-source CT coronary angiography with high pitch: diagnostic yield of a volumetric planning scan and effects on dose reduction and imaging strategy

OBJECTIVE To evaluate the role of an ultra-low-dose dual-source CT coronary angiography (CTCA) scan with high pitch for delimiting the range of the subsequent standard CTCA scan. METHODS 30 patients with an indication for CTCA were prospectively examined using a two-scan dual-source CTCA protocol (2.0 × 64.0 × 0.6 mm; pitch, 3.4; rotation time of 280 ms; 100 kV): Scan 1 was acquired with one-fifth of the tube current suggested by the automatic exposure control software [CareDose 4D™ (Siemens Healthcare, Erlangen, Germany) using 100 kV and 370 mAs as a reference] with the scan length from the tracheal bifurcation to the diaphragmatic border. Scan 2 was acquired with standard tube current extending with reduced scan length based on Scan 1. Nine central coronary artery segments were analysed qualitatively on both scans. RESULTS Scan 2 (105.1 ± 10.1 mm) was significantly shorter than Scan 1 (127.0 ± 8.7 mm). Image quality scores were significantly better for Scan 2. However, in 5 of 6 (83%) patients with stenotic coronary artery disease, a stenosis was already detected in Scan 1 and in 13 of 24 (54%) patients with non-stenotic coronary arteries, a stenosis was already excluded by Scan 1. Using Scan 2 as reference, the positive- and negative-predictive value of Scan 1 was 83% (5 of 6 patients) and 100% (13 of 13 patients), respectively. CONCLUSION An ultra-low-dose CTCA planning scan enables a reliable scan length reduction of the following standard CTCA scan and allows for correct diagnosis in a substantial proportion of patients. ADVANCES IN KNOWLEDGE Further dose reductions are possible owing to a change in the individual patient's imaging strategy as a prior ultra-low-dose CTCA scan may already rule out the presence of a stenosis or may lead to a direct transferal to an invasive catheter procedure.

Image acquisition and manipulation protocols for CT-PET fusion to improve the accuracy of gross tumour volume localisation for 3D conformal radiotherapy for lung cancer

Aims: To develop clinical protocols for acquiring PET images, performing CT-PET registration and tumour volume definition based on the PET image data, for radiotherapy for lung cancer patients and then to test these protocols with respect to levels of accuracy and reproducibility. Method: A phantom-based quality assurance study of the processes associated with using registered CT and PET scans for tumour volume definition was conducted to: (1) investigate image acquisition and manipulation techniques for registering and contouring CT and PET images in a radiotherapy treatment planning system, and (2) determine technology-based errors in the registration and contouring processes. The outcomes of the phantom image based quality assurance study were used to determine clinical protocols. Protocols were developed for (1) acquiring patient PET image data for incorporation into the 3DCRT process, particularly for ensuring that the patient is positioned in their treatment position; (2) CT-PET image registration techniques and (3) GTV definition using the PET image data. The developed clinical protocols were tested using retrospective clinical trials to assess levels of inter-user variability which may be attributed to the use of these protocols. A Siemens Somatom Open Sensation 20 slice CT scanner and a Philips Allegro stand-alone PET scanner were used to acquire the images for this research. The Philips Pinnacle3 treatment planning system was used to perform the image registration and contouring of the CT and PET images. Results: Both the attenuation-corrected and transmission images obtained from standard whole-body PET staging clinical scanning protocols were acquired and imported into the treatment planning system for the phantom-based quality assurance study. Protocols for manipulating the PET images in the treatment planning system, particularly for quantifying uptake in volumes of interest and window levels for accurate geometric visualisation were determined. The automatic registration algorithms were found to have sub-voxel levels of accuracy, with transmission scan-based CT-PET registration more accurate than emission scan-based registration of the phantom images. Respiration induced image artifacts were not found to influence registration accuracy while inadequate pre-registration over-lap of the CT and PET images was found to result in large registration errors. A threshold value based on a percentage of the maximum uptake within a volume of interest was found to accurately contour the different features of the phantom despite the lower spatial resolution of the PET images. Appropriate selection of the threshold value is dependant on target-to-background ratios and the presence of respiratory motion. The results from the phantom-based study were used to design, implement and test clinical CT-PET fusion protocols. The patient PET image acquisition protocols enabled patients to be successfully identified and positioned in their radiotherapy treatment position during the acquisition of their whole-body PET staging scan. While automatic registration techniques were found to reduce inter-user variation compared to manual techniques, there was no significant difference in the registration outcomes for transmission or emission scan-based registration of the patient images, using the protocol. Tumour volumes contoured on registered patient CT-PET images using the tested threshold values and viewing windows determined from the phantom study, demonstrated less inter-user variation for the primary tumour volume contours than those contoured using only the patient’s planning CT scans. Conclusions: The developed clinical protocols allow a patient’s whole-body PET staging scan to be incorporated, manipulated and quantified in the treatment planning process to improve the accuracy of gross tumour volume localisation in 3D conformal radiotherapy for lung cancer. Image registration protocols which factor in potential software-based errors combined with adequate user training are recommended to increase the accuracy and reproducibility of registration outcomes. A semi-automated adaptive threshold contouring technique incorporating a PET windowing protocol, accurately defines the geometric edge of a tumour volume using PET image data from a stand alone PET scanner, including 4D target volumes.

Application of micro CT and computation modeling in bone tissue engineering

Computer aided technologies, medical imaging, and rapid prototyping has created new possibilities in biomedical engineering. The systematic variation of scaffold architecture as well as the mineralization inside a scaffold/bone construct can be studied using computer imaging technology and CAD/CAM and micro computed tomography (CT). In this paper, the potential of combining these technologies has been exploited in the study of scaffolds and osteochondral repair. Porosity, surface area per unit volume and the degree of interconnectivity were evaluated through imaging and computer aided manipulation of the scaffold scan data. For the osteochondral model, the spatial distribution and the degree of bone regeneration were evaluated. In this study the versatility of two softwares Mimics (Materialize), CTan and 3D realistic visualization (Skyscan) were assessed, too.

Improved image quality for x-ray CT imaging of gel dosimeters

Purpose: This study provides a simple method for improving precision of x-ray computed tomography (CT) scans of irradiated polymer gel dosimetry. The noise affecting CT scans of irradiated gels has been an impediment to the use of clinical CT scanners for gel dosimetry studies. Method: In this study, it is shown that multiple scans of a single PAGAT gel dosimeter can be used to extrapolate a ‘zero-scan’ image which displays a similar level of precision to an image obtained by averaging multiple CT images, without the compromised dose measurement resulting from the exposure of the gel to radiation from the CT scanner. Results: When extrapolating the zero-scan image, it is shown that exponential and simple linear fits to the relationship between Hounsfield unit and scan number, for each pixel in the image, provides an accurate indication of gel density. Conclusions: It is expected that this work will be utilised in the analysis of three-dimensional gel volumes irradiated using complex radiotherapy treatments.

Evaluation of MegaVoltage Cone Beam CT image quality with an unmodified Elekta Precise Linac and EPID : a feasibility study

In order to increase the accuracy of patient positioning for complex radiotherapy treatments various 3D imaging techniques have been developed. MegaVoltage Cone Beam CT (MVCBCT) can utilise existing hardware to implement a 3D imaging modality to aid patient positioning. MVCBCT has been investigated using an unmodified Elekta Precise linac and 15 iView amorphous silicon electronic portal imaging device (EPID). Two methods of delivery and acquisition have been investigated for imaging an anthropomorphic head phantom and quality assurance phantom. Phantom projections were successfully acquired and CT datasets reconstructed using both acquisition methods. Bone, tissue and air were 20 clearly resolvable in both phantoms even with low dose (22 MU) scans. The feasibility of MegaVoltage Cone beam CT was investigated using a standard linac, amorphous silicon EPID and a combination of a free open source reconstruction toolkit as well as custom in-house software written in Matlab. The resultant image quality has 25 been assessed and presented. Although bone, tissue and air were resolvable 2 in all scans, artifacts are present and scan doses are increased when compared with standard portal imaging. The feasibility of MVCBCT with unmodified Elekta Precise linac and EPID has been considered as well as the identification of possible areas for future development in artifact correction techniques to 30 further improve image quality.

Assessment of the effects of CT dose in averaged x-ray CT images of a dose-sensitive polymer gel

The signal-to-noise ratio achievable in x-ray computed tomography (CT) images of polymer gels can be increased by averaging over multiple scans of each sample. However, repeated scanning delivers a small additional dose to the gel which may compromise the accuracy of the dose measurement. In this study, a NIPAM-based polymer gel was irradiated and then CT scanned 25 times, with the resulting data used to derive an averaged image and a "zero-scan" image of the gel. Comparison between these two results and the first scan of the gel showed that the averaged and zero-scan images provided better contrast, higher contrast-to- noise and higher signal-to-noise than the initial scan. The pixel values (Hounsfield units, HU) in the averaged image were not noticeably elevated, compared to the zero-scan result and the gradients used in the linear extrapolation of the zero-scan images were small and symmetrically distributed around zero. These results indicate that the averaged image was not artificially lightened by the small, additional dose delivered during CT scanning. This work demonstrates the broader usefulness of the zero-scan method as a means to verify the dosimetric accuracy of gel images derived from averaged x-ray CT data.