Strengthening mechanisms in nanostructured copper/304 stainless steel multilayers

Nanostructured Cu/304 stainless steel (SS) multilayers were prepared by magnetron sputtering. 304SS has a face-centered-cubic (fcc) structure in bulk. However, in the Cu/304SS multilayers, the 304SS layers exhibit the fcc structure for layer thickness of =5 nm in epitaxy with the neighboring fcc Cu. For 304SS layer thickness larger than 5 nm, body-centered-cubic (bcc) 304SS grains grow on top of the initial 5 nm fcc SS with the Kurdjumov-Sachs orientation relationship between bcc and fcc SS grains. The maximum hardness of Cu/304SS multilayers is about 5.5 GPa (factor of two enhancement compared to rule-of-mixtures hardness) at a layer thickness of 5 nm. Below 5 nm, hardness decreases with decreasing layer thickness. The peak hardness of fcc/fcc Cu/304SS multilayer is greater than that of Cu/Ni, even though the lattice-parameter mismatch between Cu and Ni is five times greater than that between Cu and 304SS. This result may primarily be attributed to the higher interface barrier stress for single-dislocation transmission across the {111} twinned interfaces in Cu/304SS as compared to the {100} interfaces in Cu/Ni.

A fuzzy expected value approach under generalized data envelopment analysis

Fuzzy data envelopment analysis (DEA) models emerge as another class of DEA models to account for imprecise inputs and outputs for decision making units (DMUs). Although several approaches for solving fuzzy DEA models have been developed, there are some drawbacks, ranging from the inability to provide satisfactory discrimination power to simplistic numerical examples that handles only triangular fuzzy numbers or symmetrical fuzzy numbers. To address these drawbacks, this paper proposes using the concept of expected value in generalized DEA (GDEA) model. This allows the unification of three models - fuzzy expected CCR, fuzzy expected BCC, and fuzzy expected FDH models - and the ability of these models to handle both symmetrical and asymmetrical fuzzy numbers. We also explored the role of fuzzy GDEA model as a ranking method and compared it to existing super-efficiency evaluation models. Our proposed model is always feasible, while infeasibility problems remain in certain cases under existing super-efficiency models. In order to illustrate the performance of the proposed method, it is first tested using two established numerical examples and compared with the results obtained from alternative methods. A third example on energy dependency among 23 European Union (EU) member countries is further used to validate and describe the efficacy of our approach under asymmetric fuzzy numbers.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.

Eradication and phenotypic tolerance of Burkholderia cenocepacia biofilms exposed to atmospheric pressure non-thermal plasma.

Chronic lung infection with bacteria from the Burkholderia cepacia complex (BCC), and in particular B. cenocepacia, is associated with significant morbidity and mortality in patients with cystic fibrosis (CF). B. cenocepacia can spread from person to person and exhibits intrinsic broad-spectrum antibiotic resistance. Recently, atmospheric pressure non-thermal plasmas (APNTPs) have gained increasing attention as a novel approach to the prevention and treatment of a variety of hospital-acquired infections. In this study, we evaluated an in-house-designed kHz-driven plasma source for the treatment of biofilms of a number of clinical CF B. cenocepacia isolates. The results demonstrated that APNTP is an effective and efficient tool for the eradication of B. cenocepacia biofilms but that efficacy is highly variable across different isolates. Determination of phenotypic differences between isolates in an attempt to understand variability in plasma tolerance revealed that isolates which are highly tolerant to APNTP typically produce biofilms of greater biomass than their more sensitive counterparts. This indicates a potential role for biofilm matrix components in biofilm tolerance to APNTP exposure. Furthermore, significant isolate-dependent differences in catalase activity in planktonic bacteria positively correlated with phenotypic resistance to APNTP by isolates grown in biofilms.

The Burkholderia Cenocepacia OmpA-Like Protein BCAL2958: Identification, Characterization, and Detection of Anti-BCAL2958 Antibodies in Serum from B. Cepacia Complex-Infected Cystic Fibrosis Patients

Respiratory infections by bacteria of the Burkholderia cepacia complex (Bcc) remain an important cause of morbidity and mortality among cystic fibrosis patients, highlighting the need for novel therapeutic strategies. In the present work we have studied the B. cenocepacia protein BCAL2958, a member of the OmpA-like family of proteins, demonstrated as highly immunogenic in other pathogens and capable of eliciting strong host immune responses. The encoding gene was cloned and the protein, produced as a 6× His-tagged derivative, was used to produce polyclonal antibodies. Bioinformatics analyses led to the identification of sequences encoding proteins with a similarity higher than 96 % to BCAL2958 in all the publicly available Bcc genomes. Furthermore, using the antibody it was experimentally demonstrated that this protein is produced by all the 12 analyzed strains from 7 Bcc species. In addition, results are also presented showing the presence of anti-BCAL2958 antibodies in sera from cystic fibrosis patients with a clinical record of respiratory infection by Bcc, and the ability of the purified protein to in vitro stimulate neutrophils. The widespread production of the protein by Bcc members, together with its ability to stimulate the immune system and the detection of circulating antibodies in patients with a documented record of Bcc infection strongly suggest that the protein is a potential candidate for usage in preventive therapies of infections by Bcc.

Avaliação da eficiência dos programas de pós-graduação acadêmicos em Administração, Contabilidade e Turismo

The Triennial Evaluation of Coordination for the Improvement of Higher Education Personnel (CAPES) is made according to several indicators, divided into several issues and items, and their weights. In these it is evident the importance of scientific periodicals. This study aims to evaluate the relative efficiency of post-graduate students in Business Administration, Accounting and tourism evaluated by CAPES in Brazil. The methodology used the data envelopment analysis - DEA (Data Envelopment Analysis). The data were obtained from the site and organized by the CAPES Qualis score. The analysis was performed by the DEA variable returns to scale, product-oriented (BCC-O), with data from the three-year periods 2004-2006 and 2007-2009. Among the main results are the average increase significantly the relative efficiency of the programs in the period 2007-2009 compared to 2004-2006 period, the highest average efficiency of programs linked to public institutions in relation to private, doctoral programs with the present average efficiency sharply higher than those only with masters, and senior programs in general were more efficient. There is also moderate and significant correlation between the efficiency scores and concepts CAPES. The Malmquist index analysis showed that more than 85% of programs had increased productivity. It is noteworthy that the main effect that influences the increase of the Malmquist index is the displacement of the border (Frontier-shift)

Physicochemical characterisation of protein ingredients prepared from milk by ultrafiltration or microfiltration for application in formulated nutritional products

Formulated food systems are becoming more sophisticated as demand grows for the design of structural and nutritional profiles targeted at increasingly specific demographics. Milk protein is an important bio- and techno-functional component of such formulations, which include infant formula, sports supplements, clinical beverages and elderly nutrition products. This thesis outlines research into ingredients that are key to the development of these products, namely milk protein concentrate (MPC), milk protein isolate (MPI), micellar casein concentrate (MCC), β-casein concentrate (BCC) and serum protein concentrate (SPC). MPC powders ranging from 37 to 90% protein (solids basis) were studied for properties of relevance to handling and storage of powders, powder solubilisation and thermal processing of reconstituted MPCs. MPC powders with ≥80% protein were found to have very poor flowability and high compressibility; in addition, these high-protein MPCs exhibited poor wetting and dispersion characteristics during rehydration in water. Heat stability studies on unconcentrated (3.5%, 140°C) and concentrated (8.5%, 120°C) MPC suspensions, showed that suspensions prepared from high-protein MPCs coagulated much more rapidly than lower protein MPCs. β-casein ingredients were developed using membrane processing. Enrichment of β-casein from skim milk was performed at laboratory-scale using ‘cold’ microfiltration (MF) at <4°C with either 1000 kDa molecular weight cut-off or 0.1 µm pore-size membranes. At pilot-scale, a second ‘warm’ MF step at 26°C was incorporated for selective purification of micellised β-casein from whey proteins; using this approach, BCCs with β-casein purity of up to 80% (protein basis) were prepared, with the whey protein purity of the SPC co-product reaching ~90%. The BCC ingredient could prevent supersaturated solutions of calcium phosphate (CaP) from precipitating, although the amorphous CaP formed created large micelles that were less thermo-reversible than those in CaP-free systems. Another co-product of BCC manufacture, MCC powder, was shown to have superior rehydration characteristics compared to traditional MCCs. The findings presented in this thesis constitute a significant advance in the research of milk protein ingredients, in terms of optimising their preparation by membrane filtration, preventing their destabilisation during processing and facilitating their effective incorporation into nutritional formulations designed for consumers of a specific age, lifestyle or health status

Dermoscopic variability of basal cell carcinoma according to clinical type and anatomic location

Background Correctly diagnosing basal cell carcinoma (BCC) clinical type is crucial for the therapeutic management. A systematic description of the variability of all reported BCC dermoscopic features according to clinical type and anatomic location is lacking. Objectives To describe the dermoscopic variability of BCC according to clinical type and anatomic location and to test the hypothesis of a clinical/dermoscopic continuum across superficial BCCs (sBCCs) with increasing palpability. Methods Clinical/dermoscopic images of nodular BCCs (nBCCs) and sBCCs with different degrees of palpability were retrospectively evaluated for the presence of dermoscopic criteria including degree of pigmentation, BCC-associated patterns, diverse vascular patterns, melanocytic patterns and polarized light patterns. Results We examined 501 histopathologically proven BCCs (66.9% sBCCs; 33.1% nBCCs), mainly located on trunk (46.7%; mostly sBCCs) and face (30.5%; mostly nBCCs). Short fine telangiectasias, leaf-like areas, spoke-wheel areas, small erosions and concentric structures were significantly associated with sBCC, whereas arborizing telangiectasias, blue-white veil-like structures, white shiny areas and rainbow pattern with nBCCs. Short fine telangiectasia, spoke-wheel areas and small erosions were independently associated with trunk location, whereas arborizing telangiectasias with facial location. Scalp BCCs had significantly more pigmentation and melanocytic criteria than BCCs located elsewhere. Multiple clinical/dermoscopic parameters displayed a significant linear trend across increasingly palpable sBCCs. Conclusions Particular dermoscopic criteria are independently associated with clinical type and anatomic location of BCC. Heavily pigmented, scalp BCCs are the most challenging to diagnose. A clinical/dermoscopic continuum across increasingly palpable sBCCs was detected and could be potentially important for the non-surgical management of the disease.

Adhésion au traitement de la maladie rénale chronique chez les québécois âgés de 18 ans ou plus

Introduction La progression de la maladie rénale chronique (MRC) augmente le risque des maladies cardiovasculaires. L’hypertension, le diabète et la dyslipidémie sont à la fois des facteurs de risque et des comorbidités de la MRC. Chez les individus souffrant de MRC, la persistance et l’observance du traitement de ces facteurs de risque, i.e. le traitement antihypertenseur (TAH), le traitement hypolipémiant (THL) et le traitement antidiabétique (TAD) contribuent à réduire le risque de mortalité et de morbidité cardiovasculaires. Néanmoins, la persistance et l’observance de ces traitements restent encore peu étudiées chez les individus ayant la MRC. Objectifs: Spécifiquement pour chacun des trois traitements (TAH, THL et TAD), une étude de cohorte a été menée dans le but : 1) d’estimer la persistance à prendre le traitement un an après le début du traitement; 2) d’estimer l’observance du traitement au cours de l’année suivant le début du traitement chez les persistants; 3) d’identifier les facteurs associés à la persistance; et 4) d’identifier les facteurs associés à l’observance. Méthodologie: Nous avons utilisé les banques de données administratives de la Régie de l’assurance maladie du Québec (RAMQ) pour mener trois études de cohorte chez les personnes âgées de 18 ans ou plus. Une étude a été conduite chez les individus qui ont commencé un TAH, l’autre conduite chez les patients ayant commencé un THL et la dernière menée chez les nouveaux utilisateurs de TAD. Les individus qui poursuivaient encore leur traitement un an après son début ont été considérés persistants. Parmi les persistants, les patients qui ont eu une proportion de jours couverts (PJC) ≥ 80 % ont été considérés observants. Les facteurs associés à la persistance et ceux associés à l’observance ont été identifiés à l’aide d’une régression de Poisson modifiée. Résultats: Parmi les 7 119 patients ayant débuté un TAH, 78,8 % ont été persistants et 87,7 % des persistants ont été observants. Les individus qui étaient plus susceptibles d’être persistants se trouvaient dans le groupe des utilisateurs de monothérapie d’inhibiteurs de l’enzyme de conversion de l’angiotensine (IECA) (Rapport de prévalences (RP) : 1,20; intervalle de confiance (IC) à 95 % : 1,13-1,27), d’antagonistes du récepteur de l’angiotensine II (ARA) (1,22; 1,14-1,31), de bloquants des canaux calciques (BCC) (1,20; 1,14-1,26), de bêta-bloquants (BB) (1,16; 1,10-1,23) et de multithérapie (1,31; 1,25-1,38) (référence : monothérapie de diurétiques (DIU)). Les individus qui étaient plus susceptibles d’être observants étaient les utilisateurs de monothérapie d’IECA (1,08; 1,03-1,04), de BB (1,10; 1,05-1,15), de BCC (1,10; 1,05-1,15) et de multithérapie. Des 14 607 individus ayant débuté un THL, 80,7 % ont persisté à le prendre; de ces derniers, 88,7 % étaient observants du THL. Les patients qui étaient plus susceptibles d’être persistants étaient ceux ayant un statut socio-économique (SSE) faible (1,03; 1,01-1,06) (référence : SSE élevé) et ceux dont le traitement initial avait été prescrit par un néphrologue (1,06; 1,04-1,09) (référence : omnipraticien). Les individus qui étaient plus susceptibles d’être observants étaient ceux âgés ≥ 66 ans (référence : 18-65) (1,04; 1,01-1,07), ceux ayant un SSE faible (1,08; 1,06-1,10) et ceux qui avaient pris plus de 12 médicaments différents (référence : <7) (1,03; 1.00-1,05). Sur un total de 6 671 individus ayant débuté un TAD, 76,9 % ont persisté à prendre le traitement. Parmi les persistants, 87,9 % étaient observants. Les individus ayant un SSE faible (1,04; 1,01-1,07) (référence : SSE élevé) ou une multithérapie (1,12; 1,08-1,16) (référence : monothérapie de metformine) étaient plus susceptibles d’être persistants, tout comme ceux ayant une comorbidité dont l’hypertension artérielle (1,04; 1,01-1,07), la dyslipidémie (1,06; 1,03-1,10), l’accident vasculaire cérébral (AVC) (1,05; 1,01-1,11) ou la maladie coronarienne (1,03; 1,01-1,06). Les individus plus susceptibles d’être observants étaient ceux ayant un SSE moyen (1,03; 1,01-1,07) ou une multithérapie (1,06; 1,03-1,09). Conclusion: Peu importe le traitement initié par les individus souffrant de MRC, environ 30% des patients ne seraient pas persistants un an après le début du traitement ou observants dans l’année suivant l’initiation. Certains facteurs sont associés de façon consistante à la persistance, par exemple l’AVC, la maladie coronarienne et le nombre de visites médicales, alors que l’âge et le SSE sont associés à l’observance peu importe que le traitement initial soit un TAH, un THL ou un TAD.

Integração das metodologias DEA e BSC para a avaliação de controlo de gestão e dos negócios

Mestrado em Controlo de Gestão e dos Negócios

Modern advances in glass-coated microwires: A significant distinction as a soft magnet

174 p.

Avaliação da eficiência dos programas de pós-graduação acadêmicos em Administração, Contabilidade e Turismo

The Triennial Evaluation of Coordination for the Improvement of Higher Education Personnel (CAPES) is made according to several indicators, divided into several issues and items, and their weights. In these it is evident the importance of scientific periodicals. This study aims to evaluate the relative efficiency of post-graduate students in Business Administration, Accounting and tourism evaluated by CAPES in Brazil. The methodology used the data envelopment analysis - DEA (Data Envelopment Analysis). The data were obtained from the site and organized by the CAPES Qualis score. The analysis was performed by the DEA variable returns to scale, product-oriented (BCC-O), with data from the three-year periods 2004-2006 and 2007-2009. Among the main results are the average increase significantly the relative efficiency of the programs in the period 2007-2009 compared to 2004-2006 period, the highest average efficiency of programs linked to public institutions in relation to private, doctoral programs with the present average efficiency sharply higher than those only with masters, and senior programs in general were more efficient. There is also moderate and significant correlation between the efficiency scores and concepts CAPES. The Malmquist index analysis showed that more than 85% of programs had increased productivity. It is noteworthy that the main effect that influences the increase of the Malmquist index is the displacement of the border (Frontier-shift)

Polyphasic characterisation of Burkholderia cepacia complex species isolated from children with cystic fibrosis

Cystic fibrosis (CF) patients with Burkholderia cepacia complex (Bcc) pulmonary infections have high morbidity and mortality. The aim of this study was to compare different methods for identification of Bcc species isolated from paediatric CF patients. Oropharyngeal swabs from children with CF were used to obtain isolates of Bcc samples to evaluate six different tests for strain identification. Conventional (CPT) and automatised (APT) phenotypic tests, polymerase chain reaction (PCR)-recA, restriction fragment length polymorphism-recA, recA sequencing, and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) were applied. Bacterial isolates were also tested for antimicrobial susceptibility. PCR-recA analysis showed that 36 out of the 54 isolates were Bcc. Kappa index data indicated almost perfect agreement between CPT and APT, CPT and PCR-recA, and APT and PCR-recA to identify Bcc, and MALDI-TOF and recA sequencing to identify Bcc species. The recA sequencing data and the MALDI-TOF data agreed in 97.2% of the isolates. Based on recA sequencing, the most common species identified were Burkholderia cenocepacia IIIA (33.4%), Burkholderia vietnamiensis (30.6%), B. cenocepacia IIIB (27.8%), Burkholderia multivorans (5.5%), and B. cepacia (2.7%). MALDI-TOF proved to be a useful tool for identification of Bcc species obtained from CF patients, although it was not able to identify B. cenocepacia subtypes.

Fabricación y caracterización de películas delgadas de óxidos transparentes con aplicaciones ópticas.

Los óxidos transparentes conductores (TCO′ s) son materiales compuestos conformados por oxígeno y un metal, que presentan una combinación única de alta estabilidad química, alta concentración electrónica y alta transparencia óptica. Por esta razón, el procesamiento de TCO′ s en película delgada va orientado hacia aplicaciones específicas tales como ventanas ópticas en celdas solares, sensores de gases, electrodos en dispositivos de pantallas planas, ventanas inteligentes. En este proyecto se trabajó en la síntesis experimental de dos TCO′ s relevantes tanto en investigación fundamental como en aplicaciones tecnológicas: el óxido de indio (In2O3) y el óxido de estaño (SnO2). Ambos TCO′ s se depositaron por la técnica de erosión iónica reactiva por corriente directa (DC). Para el análisis de las películas se utilizaron varias técnicas de caracterización: difracción de rayos X, espectroscopia UV-Visible, resistividad eléctrica, efecto Hall, así como microscopías electrónica de barrido y de fuerza atómica. Se fabricó también una bicapa de In2O3/SnO2, la cual se caracterizó además con espectroscopia de fotoemisión de rayos X (XPS).En esta tesis se reporta por primera vez la síntesis y caracterización de esta bicapa, la cual abre una línea de investigación en el área de interfaces. Asimismo, se desarrolló e implementó un procedimiento, basado en los modelos ópticos, tal que permite obtener parámetros que se utilizan para evaluar a cualquier película delgada TCO como potencial metamaterial. Las propiedades de las muestras se analizaron en función de la temperatura aplicada post-depósito: temperatura ambiente (TA), 100oC, 200oC, 300oC, bajo una atmósfera de argón o argón-oxígeno. Los resultados confirman que las películas presentan un crecimiento de tipo poli cristalino. Además, la calidad cristalina tiende a incrementarse como función del incremento de la temperatura. El In2O3 creció con estructura cúbica bcc (a=10.11 ˚A, ICDD #71-2195). A partir de 200C, se detectaron trazas de la fase romboédrica (a=5.490 ˚A, c=14.520 ˚A, ICDD #73-1809). Asimismo, el SnO2 creció con estructura tetragonal (a = 4.737 ˚A, c = 3.186 ˚A, ICDD #88-0287). Las películas de In2O3 poseen una transparencia promedio del 90 % en una ventana de 500 nm a 1100 nm. El borde de absorción se recorre al azul como función de la temperatura, de Eg=3.3 eV a Eg=3.7 eV por el efecto Burstein-Moss. Por otra parte, la bicapa presentó una interfaz claramente definida, sin difusión de especies metálicas. Al incrementarse la temperatura, de TA a 400oC, se detectaron dos fases de óxido de estaño: SnO2 y SnO, en un porcentaje atómico de ≈70 %:30 %, respectivamente. Se concluye que los parámetros y valores obtenidos de las películas como son el texturizado y espesor homogéneo, alta transparencia, crecimiento preferencial, ancho prohibido y resistividad eléctrica, son comparables a los que se requieren del In2O3 y SnO2 en película delgada para aplicaciones optoelectrónicas.

A eficiência técnica dos portos e terminais públicos e privados brasileiros marítimos no período de 2010 a 2014

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.