Dominant-non-dominant asymmetry of kicking a stationary and rolling ball in a futsal context

The aim of this study was to analyse the characteristics of the asymmetries in the dominant and non-dominant limbs when kicking stationary and rolling balls. Ten experienced Brazilian amateur futsal players participated in this study. Each participant performed kicks under two conditions (stationary ball vs. rolling ball) with the dominant and non-dominant limbs (five kicks per condition per limb). We analysed the kicking accuracy, ball and foot velocities, angular joint displacement and velocity. The asymmetry between the dominant and non-dominant limbs was analysed by symmetry index and two-way repeated measures ANOVA. The results did not reveal any interaction between the condition and limb for ball velocity, foot velocity and accuracy. However, kicking with the dominant limb in both kicks showed higher ball velocity (stationary ball: dominant - 24.27 ± 2.21 m · s(-1) and non-dominant - 21.62 ± 2.26 m · s(-1); rolling ball: dominant - 23.88 ± 2.71 m · s(-1) and non-dominant - 21.42 ± 2.25 m · s(-1)), foot velocity (stationary ball: dominant - 17.61 ± 1.87 m · s(-1) and non-dominant - 15.58 ± 2.69 m · s(-1); rolling ball: dominant - 17.25 ± 2.26 m · s(-1) and non-dominant - 14.77 ± 2.35 m · s(-1)) and accuracy (stationary ball: dominant - 1.17 ± 0.84 m and non-dominant - 1.56 ± 1.30 m; rolling ball: dominant - 1.31 ± 0.91 m and non-dominant - 1.97 ± 1.44 m). In addition, the angular joint adjustments were dependent on the limb in both kicks (the kicks with non-dominant limb showed lower hip external rotation than the kicks with the dominant limb), indicating that the hip joint is important in kick performance. In conclusion, the kicks with the non-dominant limb showed different angular adjustments in comparison to kicks with the dominant limb. In addition, kicking a rolling ball with the non-dominant limb showed higher asymmetry for accuracy, indicating that complex kicks are more asymmetric.

Algumas técnicas de construção de alguns poliedros e suas aplicações no ensino

Pós-graduação em Matemática em Rede Nacional - IBILCE

Algumas técnicas de construção de alguns poliedros e suas aplicações no ensino

Pós-graduação em Matemática em Rede Nacional - IBILCE

Relationship between elastic and mechanical properties of dental ceramics and their index of brittleness

The purpose of the study was to verify the effects of a number of materials' parameters (crystalline content; Young's modulus, E; biaxial flexure strength, sigma(i); Vickers hardness, VH; fracture toughness, K-Ic; fracture surface energy, gamma(f); and index of brittleness, B) on the brittleness of dental ceramics. Five commercial dental ceramics with different contents of glass phase and crystalline particles were studied: a vitreous porcelain (VM7/V), a porcelain with 16 vol% leucite particles (d.Sign/D), a glass-ceramic with 29 vol% leucite particles (Empress/E1), a glass-ceramic with 58 vol% lithium-disilicate needle-like particles (Empress 2/E2), and a glass-infiltrated alumina composite with 65 vol% crystals (In-Ceram Alumina/IC). Discs were constructed according to manufacturers' instructions, ground and polished to final dimensions (12 mm x 1.1 mm). Elastic constants were determined by ultrasonic pulse-echo method. sigma(i) was determined by piston-on-3-balls method in inert condition. VH was determined using 19.6 N load and K-Ic was determined by indentation strength method. gamma(f) was calculated from the Griffith-Irwin relation and B by the ratio of HV to K-Ic. IC and E2 showed higher values of sigma(i), E, K-Ic and gamma(f), and lower values of B compared to leucite-based glass-ceramic and porcelains. Positive correlations were observed for sigma(i) versus K-Ic, and K-Ic versus E-1/2, however, E did not show relationship with HV and B. The increase of crystalline phase content is beneficial to decrease the brittleness of dental ceramics by means of both an increase in fracture surface energy and a lowering in index of brittleness. (C) 2012 Elsevier Ltd and Techna Group Sri. All rights reserved.

Influence of Modifications to the Pechini Method on the Electroactivity and Stability of Pt-RuOx/C Catalysts

Since electrode electroactivity and stability depend directly on the nature, morphology, and structure of the material, we have investigated how modifications to the Pechini method during the synthesis of Pt-RuOx/C electrocatalysts affected catalyst activity. The structure and stability of the resulting materials were investigated after their submission to a large number of potential scans and to constant potential for a prolonged time period in sulfuric acid 0.5 mol L-1 and methanol 0.1 mol L-1 solution. DMFC tests were accomplished using membrane electrode assemblies (MEAs) prepared by hot-pressing a pretreated Nafion 117 membrane together with the prepared Pt-RuOx anodes and a Pt cathode (from E-TEK), in order to compare the catalytic activity of the materials prepared by different methods. The stability studies demonstrated that the catalyst whose resin/carbon support mixture was agitated in a balls mill before undergoing heat-treatment was more stable than the other prepared catalysts. The catalysts synthesized with the single resin consisting of Pt and Ru and subjected to ultrasound before heat-treatment furnished the highest power density in the single fuel cell. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.011208jes]

Astroparticle physics with nuclear track detectors

This thesis is mainly about the search for exotic heavy particles -Intermediate Mass Magnetic Monopoles, Nuclearites and Q-balls with the SLIM experiment at the Chacaltaya High Altitude Laboratory (5230 m, Bolivia), establishing upper limits (90% CL) in the absence of candidates, which are among the best if not the only one for all three kind of particles. A preliminary study of the background induced by cosmic neutron in CR39 at the SLIM site, using Monte Carlo simulations. The measurement of the elemental abundance of the primary cosmic ray with the CAKE experiment on board of a stratospherical balloon; the charge distribution obtained spans in the range 5≤Z≤31. Both experiments were based on the use of plastic Nuclear Track Detectors, which records the passage of ionizing particles; by using some chemical reagents such passage can be make visible at optical microscopes.

Biomeccanica del servizio e del diritto nel tennis: confronto fra atleti di livello di gioco differente

Il tennis è uno sport molto diffuso che negli ultimi trent’anni ha subito molti cambiamenti. Con l’avvento di nuovi materiali più leggeri e maneggevoli la velocità della palla è aumentata notevolmente, rendendo così necessario una modifica a livello tecnico dei colpi fondamentali. Dalla ricerca bibliografica sono emerse interessanti indicazioni su angoli e posizioni corporee ideali da mantenere durante le varie fasi dei colpi, confrontando i giocatori di altissimo livello. Non vi sono invece indicazioni per i maestri di tennis su quali siano i parametri più importanti da allenare a seconda del livello di gioco del proprio atleta. Lo scopo di questa tesi è quello di individuare quali siano le variabili tecniche che influenzano i colpi del diritto e del servizio confrontando atleti di genere differente, giocatori di livello di gioco diverso (esperti, intermedi, principianti) e dopo un anno di attività programmata. Confrontando giocatori adulti di genere diverso, è emerso che le principali differenze sono legate alle variabili di prestazione (velocità della palla e della racchetta) per entrambi i colpi. Questi dati sono simili a quelli riscontrati nel test del lancio della palla, un gesto non influenzato dalla tecnica del colpo. Le differenze tecniche di genere sono poco rilevanti ed attribuibili alla diversa interpretazione dei soggetti. Nel confronto di atleti di vario livello di gioco le variabili di prestazione presentano evidenti differenze, che possono essere messe in relazione con alcune differenze tecniche rilevate nei gesti specifici. Nel servizio i principianti tendono a direzionare l’arto superiore dominante verso la zona bersaglio, abducendo maggiormente la spalla ed avendo il centro della racchetta più a destra rispetto al polso. Inoltre, effettuano un caricamento minore degli arti inferiori, del tronco e del gomito. Per quanto riguarda il diritto si possono evidenziare queste differenze: l’arto superiore è sempre maggiormente esteso per il gruppo dei principianti; il tronco, nei giocatori più abili viene utilizzato in maniera più marcata, durante la fase di caricamento, in movimenti di torsione e di inclinazione laterale. Gli altri due gruppi hanno maggior difficoltà nell’eseguire queste azioni preparatorie, in particolare gli atleti principianti. Dopo un anno di attività programmata sono stati evidenziati miglioramenti prestativi. Anche dal punto di vista tecnico sono state notate delle differenze che possono spiegare il miglioramento della performance nei colpi. Nel servizio l’arto superiore si estende maggiormente per colpire la palla più in alto possibile. Nel diritto sono da sottolineare soprattutto i miglioramenti dei movimenti del tronco in torsione ed in inclinazione laterale. Quindi l’atleta si avvicina progressivamente ad un’esecuzione tecnica corretta. In conclusione, dal punto di vista tecnico non sono state rilevate grosse differenze tra i due generi che possano spiegare le differenze di performance. Perciò questa è legata più ad un fattore di forza che dovrà essere allenata con un programma specifico. Nel confronto fra i vari livelli di gioco e gli effetti di un anno di pratica si possono individuare variabili tecniche che mostrano differenze significative tra i gruppi sperimentali. Gli evoluti utilizzano tutto il corpo per effettuare dei colpi più potenti, utilizzando in maniera tecnicamente più valida gli arti inferiori, il tronco e l’arto superiore. I principianti utilizzano prevalentemente l’arto superiore con contributi meno evidenti degli altri segmenti. Dopo un anno di attività i soggetti esaminati hanno dimostrato di saper utilizzare meglio il tronco e l’arto superiore e ciò può spiegare il miglioramento della performance. Si può ipotizzare che, per il corretto utilizzo degli arti inferiori, sia necessario un tempo più lungo di apprendimento oppure un allenamento più specifico.

Secondary skull fractures in head wounds inflicted by captive bolt guns: autopsy findings and experimental simulation

Apart from one article published by Rabl and Sigrist in 1992 (Rechtsmedizin 2:156-158), there are no further reports on secondary skull fractures in shots from captive bolt guns. Up to now, the pertinent literature places particular emphasis on the absence of indirect lesions away from the impact point, when dealing with the wounding capacity of slaughterer's guns. The recent observation of two suicidal head injuries accompanied by skull fractures far away from the bolt's path gave occasion to experimental studies using simulants (glycerin soap, balls from gelatin) and skull brain models. As far as ballistic soap was concerned, the dimensions of the bolt's channel were assessed by multi-slice computed tomography before cutting the blocks open. The test shots to gelatin balls and to skull-brain models were documented by means of a high-speed motion camera. As expected, the typical temporary cavity effect of bullets fired from conventional guns could not be observed when captive bolt stunners were discharged. Nevertheless, the visualized transfer of kinetic energy justifies the assumption that the secondary fractures seen in thin parts of the skull were caused by a hydraulic burst effect.

Complex genital system of a haplogyne spider (Arachnida, Araneae, Tetrablemmidae) indicates internal fertilization and full female control over transferred sperm

The female genital organs of the tetrablemmid Indicoblemma lannaianum are astonishingly complex. The copulatory orifice lies anterior to the opening of the uterus externus and leads into a narrow insertion duct that ends in a genital cavity. The genital cavity continues laterally in paired tube-like copulatory ducts, which lead into paired, large, sac-like receptacula. Each receptaculum has a sclerotized pore plate with associated gland cells. Paired small fertilization ducts originate in the receptacula and take their curved course inside the copulatory ducts. The fertilization ducts end in slit-like openings in the sclerotized posterior walls of the copulatory ducts. Huge masses of secretions forming large balls are detectable in the female receptacula. An important function of these secretory balls seems to be the encapsulation of spermatozoa in discrete packages in order to avoid the mixing of sperm from different males. In this way, sperm competition may be completely prevented or at least severely limited. Females seem to have full control over transferred sperm and be able to express preference for spermatozoa of certain males. The lumen of the sperm containing secretory balls is connected with the fertilization duct. Activated spermatozoa are only found in the uterus internus of females, which is an indication of internal fertilization. The sperm cells in the uterus internus are characterized by an extensive cytoplasm and an elongated, cone-shaped nucleus. The male genital system of I. lannaianum consists of thick testes and thin convoluted vasa deferentia that open into the wide ductus ejaculatorius. The voluminous globular palpal bulb is filled with seminal fluid consisting of a globular secretion in which only a few spermatozoa are embedded. The spermatozoa are encapsulated by a sheath produced in the genital system. The secretions in females may at least partly consist of male secretions that could be involved in the building of the secretory balls or play a role in sperm activation. The male secretions could also afford nutriments to the spermatozoa.

BENEFICIATION OF HIGH-MgO SEDIMENTARY PHOSPHATE ORES

Dolomite [CaMg(CO3)2] is an intolerable impurity in phosphate ores due to its MgO content. Traditionally, the Florida phosphate industry has avoided mining high-MgO phosphate reserves due to the lack of an economically viable process for removal of dolomite. However, as the high grade phosphate reserves become depleted, more emphasis is being put on the development of a cost effective method for separating dolomite from high-MgO phosphate ores. In general, the phosphate industry demands a phosphate concentrate containing less than 1%MgO. Dolomite impurities have mineralogical properties that are very similar to the desired phosphate minerals (francolite), making the separation of the two minerals very difficult. Magnesium is primarily found as distinct dolomite-rich pebbles, very fine dolomite inclusions in predominately francolite pebbles, and magnesium substituted into the francolite structure. Jigging is a gravity separation process that attempts to take advantage of the density difference between the dolomite and francolite pebbles. A unique laboratory scale jig was designed and built at Michigan Tech for this study. Through a series of tests it was found that a pulsation rate of 200 pulse/minute, a stroke length of 1 inch, a water addition rate of 0.5gpm, and alumina ragging balls were optimum for this study. To investigate the feasibility of jigging for the removal of dolomite from phosphate ore, two high-MgO phosphate ores were tested using optimized jigging parameters: (1) Plant #1 was sized to 4.00x0.85mm and contained 1.55%MgO; (2) Plant #2 was sized to 3.40mmx0.85mm and contained 3.07% MgO. A sample from each plant was visually separated by hand into dolomite and francolite rich fractions, which were then analyzed to determine the minimum achievable MgO levels. For Plant #1 phosphate ore, a concentrate containing 0.89%MgO was achieved at a recovery of 32.0%BPL. For Plant #2, a phosphate concentrate containing 1.38%MgO was achieved at a recovery of 74.7%BPL. Minimum achievable MgO levels were determined to be 0.53%MgO for Plant #1 and 1.15%MgO for Plant #2.

Funktionalisierte Bauteile durch Selektives Maskensintern

Das Selektive Maskensintern ist ein neues, pulverbasiertes Additives Fertigungsverfahren. Das schichtweise aufgebrachte Kunststoffpulver wird hier flächig über einen Infrarotstrahler belichtet und aufgeschmolzen. Das Verfahren bietet ein großes Potential dreidimensionale, wärmeleitfähige Bauteile mit beliebiger Geometrie herzustellen. In diesem Beitrag wird darauf eingegangen, wie kommerziell erhältliches Polyamid 12-Pulver mit thermisch leitfähigen Füllstoffen, wie Aluminiumgrieß und Kupferkugeln, modifiziert und funktionalisierte Bauteile hergestellt werden können. Prozessrelevante Materialeigenschaften werden mittels Differential Scanning Kalorimetrie, Rotationsviskosimetrie und der Wärmeleitfähigkeit der modifizierten Pulver bestimmt. An den gefertigten Bauteilen wird die ausgebildete Morphologie, die mechanischen Eigenschaften als auch die Bauteilwärmeleitfähigkeit untersucht.

Iowa State Daily (February 20, 2012)

ContentsSizing upCoffee energizes students year-round'Protect Your Balls' tournament combats cancerTattoo taboo: Workplaces relax old rulesMen's, women's hoops teams sweep SoonersBirth control deal delivers women health care rights

Continuum percolation for Gibbs point processes

We consider percolation properties of the Boolean model generated by a Gibbs point process and balls with deterministic radius. We show that for a large class of Gibbs point processes there exists a critical activity, such that percolation occurs a.s. above criticality. For locally stable Gibbs point processes we show a converse result, i.e. they do not percolate a.s. at low activity.

Unter'm Belagerungszustande: Fest-Gedicht zum demokratischen Ball des Bezirks 48 b: Und unser ist die Zukunft doch, wie Ihr auch schreit und schmähet; Ob die geschminkte Dummheit sich und die Gemeinheit blähet! ...

Welsch (Projektbearbeiter): Festgedicht anläßlich eines 'demokratischen Balls', das auch angesichts der Niederschlagung der Revolution trotzige Siegesgewißheit für die Zukunft ausdrückt

Wenn Situationen bestimmen, wie Fussballer handeln. Eine empirische Untersuchung zur Bestimmung ökologischer Affordanzen für Passspielentscheidungen

Interpersonelle Handlungskoordination ist einer derjenigen Faktoren, die für das oft erwähnte, auf Gruppenebene auftauchende “Mehr” als die Summe beitragender Einzelleistungen verantwortlich gemacht wird. Verschiedene Theorien zur Gruppenhandlung anerkennen die Wichtigkeit koordinativer Prozesse und machen primär zwei Mechanismen für gelingende Handlungskoordination verantwortlich. Die Konzeption mentaler Modelle sieht den Grund in Situationsrepräsentationen, welche eine antizipative Koordination von individuellen Handlungsbeiträgen aufgrund von situationsbezogenen Wissensstrukturen ermöglichen. Gemäß dem dynamisch-ökologischen Ansatz hingegen erwächst interpersonell koordiniertes Handeln aus den situativen Affordanzen und Bedingungen, die sich im Verlauf von Spielen ergeben. Entsprechend basieren interpersonelle Handlungen nicht aus vorgefertigten Handlungsplänen, sondern ergeben sich online aus der Interaktion mit situativen Gegebenheiten. Aufgrund der Schwierigkeit, mit Daten von Gruppensystemen in dynamischen Kontexten statistisch umzugehen, hinkt die empirische Bestimmung des Einflusses kontextueller Affordanzen auf Handlungsentscheidungen theoretischen Überlegungen hinterher. Das Ziel der vorliegenden Studie war deswegen, die Effekte von Spielsituationsmerkmalen auf Passspielentscheidungen statistisch zu überprüfen. Als Versuchspersonen dienten die Kader zweier Fußballmannschaften (N = 36, M = 23.06 Jahre, SD = 4.85) aus der vierten Spielliga der Schweizer Fußballverbandes. Anhand von Informationen zu Mannschaftsaufstellungen und Spielsystemen wurden 40 Spielsituationen graphisch aufbereitet und auf Plausibilität rücküberprüft. Die Versuchspersonen übernahmen die Perspektive des ballbesitzenden Spielers und entschieden sich aus den jeweiligen Spielsituationen heraus für Passzuspiele. Zur Bestimmung von kontextuellen Handlungsindikatoren wurden die Spielsituationen im Hinblick auf Spielerpositionierungen und -verteilungen, interpersonelle Distanzen und die Stellungen der Verteidiger vermessen. Zur Bestimmung des Effektes von situativen Gegebenheiten auf die abhängige Variable Passspielentscheidung wurden verallgemeinerte gemischte lineare Modelle für binomial verteilte Daten spezifiziert. Signifikante Effekte der Distanzen zu Mitspielern, deren Nähe zum gegnerischen Tor, der Offenheit von Passwegen, sowie der defensiven Abschirmung bestätigten den Einfluss kontextueller Gegebenheiten auf Passentscheidungen (alle p < .001). Die Ergebnisse weisen auf die Relevanz von Situationsmerkmalen bei Passentscheidungen und damit auf die Angemessenheit des dynamisch-ökologischen Erklärungsansatzes hin. Durch seine Funktion als Spielgerät bestimmt der Spielball meist den fokalen Punkt einer handelnden Fußballmannschaft. Dadurch gerät der Fokus in theoretischen Gruppenhandlungsmodellen meist weg von den kontextuellen Gegebenheiten. Da diese im Fußball nicht starr oder vorbestimmt sind, sondern sich durch das Verhalten anderer Mit- und Gegenspieler verändern lassen, drängt sich ein Verständnis von dezentral mitgesteuerter Gruppenhandlung auf, gemäß dem Mitspieler abseits des Balls für das Schaffen ökologischer Gegebenheiten verantwortlich sind und damit interpersonelle Handlungseinheiten indirekt beeinflussen können.