A combined XPS-UPS-EELS study of nitrogen adsorbed on clean and barium-promoted iron surfaces: The nature of the precursor to dissociation

For N2 on a clean Fe surface, the adsorbed precursor in a parallel orientation becomes predominant around 110 K, while at lower temperatures it coexists with a weakly adsorbed species. On a Ba-promoted Fe surface, however, N2 is present exclusively in the precursor state in the temperature range 80–150 K following moderate exposure. Besides exhibiting a low N-N stretching frequency of 1530 cm−1, the precursor shows a clear separation between the 5σ and 1π levels in the UPS; the precursor dissociates to give a nitridic species around 160 K.

The nature of hydrogen induced amorphization of SmNi2 laves compound

Abstract is not available.

Representing the epistemic nature of teachers’ practical knowledge : The case of class teachers’ general pedagogy

The present study addressed the epistemology of teachers’ practical knowledge. Drawing from the literature, teachers’ practical knowledge is defined as all teachers’ cognitions (e.g., beliefs, values, motives, procedural knowing, and declarative knowledge) that guide their practice of teaching. The teachers’ reasoning that lies behind their practical knowledge is addressed to gain insight into its epistemic nature. I studied six class teachers’ practical knowledge; they teach in the metropolitan region of Helsinki. Relying on the assumptions of the phenomenographic inquiry, I collected and analyzed the data. I analyzed the data in two stages where the first stage involved an abductive procedure, and the second stage an inductive procedure for interpretation, and thus developed the system of categories. In the end, a quantitative analysis nested into the qualitative findings to study the patterns of the teachers’’ reasoning. The results indicated that teachers justified their practical knowledge based on morality and efficiency of action; efficiency of action was found to be presented in two different ways: authentic efficiency and naïve efficiency. The epistemic weight of morality was embedded in what I call “moral care”. The core intention of teachers in the moral care was the commitment that they felt about the “whole character” of students. From this perspective the “dignity” and the moral character of the students should not replaced for any other “instrumental price”. “Caring pedagogy” was the epistemic value of teachers’ reasoning in the authentic efficiency. The central idea in the caring pedagogy was teachers’ intentions to improve the “intellectual properties” of “all or most” of the students using “flexible” and “diverse” pedagogies. However, “regulating pedagogy” was the epistemic condition of practice in the cases corresponding to naïve efficiency. Teachers argued that an effective practical knowledge should regulate and manage the classroom activities, but the targets of the practical knowledge were mainly other “issues “or a certain percentage of the students. In these cases, the teachers’ arguments were mainly based on the notion of “what worked” regardless of reflecting on “what did not work”. Drawing from the theoretical background and the data, teachers’ practical knowledge calls for “praxial knowledge” when they used the epistemic conditions of “caring pedagogy” and “moral care”. It however calls for “practicable” epistemic status when teachers use the epistemic condition of regulating pedagogy. As such, praxial knowledge with the dimensions of caring pedagogy and moral care represents the “normative” perspective on teachers’ practical knowledge, and thus reflects a higher epistemic status in comparison to “practicable” knowledge, which represents a “descriptive” perception toward teachers’ practical knowledge and teaching.

Herman Sommerfeld (center) with other reserve soldiers in military uniform Portraits Men

Digital Image

Nature of ``Disorder'' in the Ordered Double Perovskite Sr2FeMoO6

The degree of B/B alternate cation order is known to heavily influence the magnetic properties of A2BB O6 double perovskites although the nature of such disorder has never been critically studied. Our detailed x-ray absorption fine structure studies in conjunction with synchrotron radiation x-ray diffraction experiments on polycrystalline Sr2FeMoO6 samples with various degrees of disorder reveal that a very high degree of short range order is preserved even in samples with highly reduced long range chemical order. Based on these experimental results and with the help of detailed structural simulations, we are able to model the nature of the disorder in this important class of materials and discuss the consequent implications on its physical properties.

Protein A: nature's universal anti-antibody

Staphylococcal protein A specifically interacts with immunogobulins. This fact is being used in various disciplines of biology and some of the unique properties of protein A and their applications are summarized in this review.

Bush Blitz aids description of three new species and a new genus of Australian beeflies (Diptera, Bombyliidae, Exoprosopini).

Bush Blitz is a three-year multimillion dollar program to document the plants and animals in hundreds of properties across Australia's National Reserve System. The core focus is on nature discovery identifying and describing new species of plants and animals. The Bush Blitz program has enabled the collection and description of beeflies (Diptera, Bombyliidae) from surveys in Western Australia and Queensland. Three new species of Australian beeflies belonging to the Exoprosopini are described; Palirika mackenziei Lambkin, sp. n., Palirika culgoafloodplainensis lambkin, sp. n., and Larrpana bushblitz Lambkin, sp. n. Phylogenetic analysis of 40 Australian exoprosopine species belonging to the Balaana generic-group Lambkin & Yeates, 2003 supports the placement of the three new species into existing genera, and the erection and description of the new genus Ngalki Lambkin, gen. n. for Ngalki trigonium (Lambkin & Yeates, 2003), comb. n. Revised keys are provided for the genera of the Australian Balaana genus-group and the species of Palirika Lambkin & Yeates, 2003 and Larrpana Lambkin & Yeates, 2003. With the description of the three new species and the transferral of Munjua trigona Lambkin & Yeates, 2003 into the new genus Ngalki Lambkin, gen. n., three genera are rediagnosed; Munjua Lambkin & Yeates, 2003, Palirika and Larrpana.

A study on the nature of the compound layer formed during the ion nitriding of En40B steel

Commercial-grade En40B steel has been ion nitrided in the temperature range 475–550°C in a 25%N2–75%H2 gas mixture. The nature of the compound layer formed was studied by the X-ray diffraction technique and optical metallography. It was observed that the structure of the compound layer gradually transforms from a predominantly epsilon (Porson) nitride to a predominantly γ′ nitride structure with increasing treatment time. Optical metallography studies on sections orthogonal to the nitrided surface showed that, after about 5 h of treatment, the thickness of the compound layer decreases with further increase in treatment time.

Effect of Load on Dry Sliding Wear of Aluminum-Silicon Alloys

Aluminum-silicon alloy pins were slid against steel disks under nominally dry condition at a speed of 0.6 m s-1. Each pin was slid at a constant load for 5 min, the load being increased in suitable steps from 2 to 65 N. The results show the wear to increase almost monotonically with load, to be sensitive to the presence of silicon in the alloy, and to be insensitive to actual silicon content. The monotonic nature of wear rate-load characteristic suggests that one dominant wear mechanism prevails over the load range studied. Morphological studies of the pin surface and the debris support this contention and point to delamination as being the dominant mode of wear.

Vibration spectra of ferroelectric alkali trihydrogen selenites and the nature of the hydrogen bond potential in these crystals

Raman spectra of the ferroelectric LiH3 (SeO3)2 and NaH3(SeO3)2 and the anti-ferroelectric KH3 (SeO3)2 have been recorded at room temperature using a He-Ne and also an Ar-ion laser source. The infrared absorption spectra of these crystals and their deuterated analogues have been recorded in the region 400–4000 cm−1 both below and above the Curie temperature. From an analysis of the spectrum in the region 400–900 cm−1 it is concluded that (i) in LiH3 (SeO3)2 the protons are ordered in an asymmetric double minimum potential with a low barrier and the spectrum can be interpreted in terms of HSeO3− and H2SeO3 vibrations, (ii) in NaH3 (SeO3)2 all three protons occupy a single minimum potential at room temperature and below the transition temperature the groups HSeO3− and H2SeO3 are present, (iii) the proton at the inversion centre in KH3(SeO3)2 is in a broad troughed potential well and the low temperature spectrum is more likely to be due to H3SeO3+ and SeO32− species. This deviation of the spectrum from that of the previous two crystals is attributed to the difference in H-bond scheme and hence the absence of any cooperative motion of protons in this crystal.

Scanning electron microscopy studies of wear in LM13 and LM13-graphite particulate composite

Examination of the structure of worn surfaces has shown that the wear of LM13 and LM13-graphite particulate composite is controlled by the nature and extent of subsurface deformation. The addition of graphite influences the wear characteristics by affecting the plastically deformed zone. The possible mechanisms of wear are discussed.

Plan U.S.R.R. Melitopol'skogo okruga Genicheskogo raiona poluostrova Chongar vymezhevannogo v poriadke chastichnogo izmeneniia ustroistva kolfonda s ustroistvom poselkov, razbivkoiu na polia sevooborota, gony soglasno nakazu N.K.Z dnia 1927, n 52-2825. Izmerenie v nature proizvedeno i plan etot sostovlen X. partieiu po ustroistvu kolfondov

Digital image

Uncanny nature: Hybrid stop motion using Blender

This talk gives an overview of the project "Uncanny Nature", which incoporates a style of animation called Hybrid Stop Motion, that combines physical object armatures with virtual copies. The development of the production pipeline (using a mix of Blender, Dragonframe, Photoscan and Arduino) is discussed, as well as the way that Blender was used throughout the production to visualise, model, animate and composite the elements together.