Mechanical Deformation Behavior of Nonpolar GaN Thick Films by Berkovich Nanoindentation

In this study, the deformation mechanisms of nonpolar GaN thick films grown on m-sapphire by hydride vapor phase epitaxy (HVPE) are investigated using nanoindentation with a Berkovich indenter, cathodoluminescence (CL), and Raman microscopy. Results show that nonpolar GaN is more susceptible to plastic deformation and has lower hardness than c-plane GaN. After indentation, lateral cracks emerge on the nonpolar GaN surface and preferentially propagate parallel to the < 11 (2) over bar0 > orientation due to anisotropic defect-related stresses. Moreover, the quenching of CL luminescence can be observed to extend exclusively out from the center of the indentations along the < 11 (2) over bar0 > orientation, a trend which is consistent with the evolution of cracks. The recrystallization process happens in the indented regions for the load of 500 mN. Raman area mapping indicates that the distribution of strain field coincides well with the profile of defect-expanded dark regions, while the enhanced compressive stress mainly concentrates in the facets of the indentation.

Investigation on the strain relaxation of InGaN layer and its effects on the InGaN structural and optical properties

The evolution of strain and structural properties of thick epitaxial InGaN layers grown on GaN with different thicknesses are investigated. It is found that, with increase in InGaN thickness, plastic relaxation via misfit dislocation generation becomes a more important strain relaxation mechanism. Accompanied with the relaxation of compressive strain, the In composition of InGaN layer increases and induces an apparent red-shift of the cathodoluminescence peak of the InGaN layer. On the other hand, the plastic relaxation process results in a high defect density, which degrades the structural and optical properties of InGaN layers. A transition layer region with both strain and In composition gradients is found to exist in the 450-nm-thick InGaN layer.

A Parallel Processing Model of Musical Structures

Euterpe is a real-time computer system for the modeling of musical structures. It provides a formalism wherein familiar concepts of musical analysis may be readily expressed. This is verified by its application to the analysis of a wide variety of conventional forms of music: Gregorian chant, Mediaeval polyphony, Back counterpoint, and sonata form. It may be of further assistance in the real-time experiments in various techniques of thematic development. Finally, the system is endowed with sound-synthesis apparatus with which the user may prepare tapes for musical performances.

Integration of micro- and macroscopic models for pedestrian evacuation simulation

Simulation of pedestrian evacuations of smart buildings in emergency is a powerful tool for building analysis, dynamic evacuation planning and real-time response to the evolving state of evacuations. Macroscopic pedestrian models are low-complexity models that are and well suited to algorithmic analysis and planning, but are quite abstract. Microscopic simulation models allow for a high level of simulation detail but can be computationally intensive. By combining micro- and macro- models we can use each to overcome the shortcomings of the other and enable new capability and applications for pedestrian evacuation simulation that would not be possible with either alone. We develop the EvacSim multi-agent pedestrian simulator and procedurally generate macroscopic flow graph models of building space, integrating micro- and macroscopic approaches to simulation of the same emergency space. By “coupling” flow graph parameters to microscopic simulation results, the graph model captures some of the higher detail and fidelity of the complex microscopic simulation model. The coupled flow graph is used for analysis and prediction of the movement of pedestrians in the microscopic simulation, and investigate the performance of dynamic evacuation planning in simulated emergencies using a variety of strategies for allocation of macroscopic evacuation routes to microscopic pedestrian agents. The predictive capability of the coupled flow graph is exploited for the decomposition of microscopic simulation space into multiple future states in a scalable manner. By simulating multiple future states of the emergency in short time frames, this enables sensing strategy based on simulation scenario pattern matching which we show to achieve fast scenario matching, enabling rich, real-time feedback in emergencies in buildings with meagre sensing capabilities.

BARRIERS AND SOLUTIONS TO OPEN SOURCE APPROPRIATE TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT: INNOVATION THROUGH COLLABORATION

It has been proposed that the field of appropriate technology (AT) - small-scale, energy efficient and low-cost solutions, can be of tremendous assistance in many of the sustainable development challenges, such as food and water security, health, shelter, education and work opportunities. Unfortunately, there has not yet been a significant uptake of AT by organizations, researchers, policy makers or the mainstream public working in the many areas of the development sector. Some of the biggest barriers to higher AT engagement include: 1) AT perceived as inferior or ‘poor persons technology’, 2) questions of technological robustness, design, fit and transferability, 3) funding, 4) institutional support, as well as 5) general barriers associated with tackling rural poverty. With the rise of information and communication technologies (ICTs) for online networking and knowledge sharing, the possibilities to tap into the collaborative open-access and open-source AT are growing, and so is the prospect for collective poverty reducing strategies, enhancement of entrepreneurship, communications, education and a diffusion of life-changing technologies. In short, the same collaborative philosophy employed in the success of open source software can be applied to hardware design of technologies to improve sustainable development efforts worldwide. To analyze current barriers to open source appropriate technology (OSAT) and explore opportunities to overcome such obstacles, a series of interviews with researchers and organizations working in the field of AT were conducted. The results of the interviews confirmed the majority of literature identified barriers, but also revealed that the most pressing problem for organizations and researchers currently working in the field of AT is the need for much better communication and collaboration to share the knowledge and resources and work in partnership. In addition, interviews showcased general receptiveness to the principles of collaborative innovation and open source on the ground level. A much greater focus on networking, collaboration, demand-led innovation, community participation, and the inclusion of educational institutions through student involvement can be of significant help to build the necessary knowledge base, networks and the critical mass exposure for the growth of appropriate technology.

Experiences of carers supporting dying renal patients managed without dialysis

Aim: To explore the impact of being a family carer to patients with stage 5 chronic kidney disease managed without dialysis.
Background: Increasing numbers of patients with renal disease worldwide are making the decision not to embark on dialysis. This group has significant physical and psychological symptom burdens similar to or greater than those in advanced cancer patients. Little is known about the impact on family carers.
Design: Exploratory, qualitative design.
Methods: The study was undertaken with 19 carers caring for patients managed in a Renal Supportive Care Service in the UK between 2006–2008. Sixty-one semi-structured interviews and detailed field notes inform the analysis.
Findings: ‘Caring from diagnosis to death’ was the overarching theme illustrated by three sub-themes: (i) Caregiver's plight – making sense of the disease and potential deterioration; (ii) Having to care indefinitely; and (iii) Avoiding talk of death. ‘Caring from diagnosis to death’ coincides with an original concept analysis of renal supportive care, which is considered an adjunct to the management of patients with renal disease at all stages of their illness.
Conclusion: There is a clear need for further research internationally and theory-based nursing interventions to support carers of patients managed without dialysis. The development of a holistic, integrated care pathway based on carer perspectives, which includes identification of information needs related to original diagnosis, associated comorbidities, treatment options, prognosis, and assistance in developing strategies to manage communication with patients as the end of life approaches, is required.

Teenagers born at extremely low birth weight

Adolescence constitutes a major transition for extremely low birth weight (ELBW) teenagers. Recent studies of ELBW teenagers born in the 1980s have provided information about the growth and developmental characteristics of these individuals in adolescence and in early adulthood. ELBW teenagers are shorter and lighter than their full-term peers, and have a smaller head circumference. Cognitive and academic vulnerabilities documented during the school years, particularly difficulties with nonverbal intelligence and arithmetic, persist into late adolescence. Many ELBW children struggle in school and have lower academic achievement levels. The self-concept of ELBW teenagers is generally similar to that of their full-term peers, but their parents perceive them to be more vulnerable over a wide range of behavioural and psychosocial dimensions, particularly depression and attention. ELBW teenagers perceive themselves as needing more assistance in job seeking than do their peers. Physical activity levels and fitness in late adolescence are significantly lower in ELBW teenagers than in their full-term peers, constituting a potential additional health hazard in later life. The outcomes of ELBW teenagers are significantly influenced by socioeconomic, family and parenting factors.

Caregiving and its impact on families of the terminally ill

Changes in the health care system have meant that increasing numbers of the terminally ill receive the majority of their care at home. The purpose of this paper was to document patterns of informal and formal care provided to the terminally ill and assess the impact caregiving has on family members. One hundred and fifty-one family caregivers were recruited for interviews from two community-nursing agencies in an urban region of the province of Ontario, Canada. The majority of respondents 119 (79%) were the female spouses of the patient. The numbers of caregivers providing assistance in specific functional activities were: bathing, 133 (88%); mobility, 123 (81%); dressing and undressing, 114 (76%); toileting, 101 (67%), and assistance at night 97 (64%). Sixty-two (41%) respondents reported that they had been providing some form of caregiving for over one year. They also reported that physical demands in caregiving increased substantially during the last three months of the care recipient's life. As family caregivers provided more assistance in activities of daily living they were at greater risk of reporting high caregiver burden. The results of this paper identify the types of care provided by family caregivers of the terminally ill and the impact these demands have on the family caregiver.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

Persistent luminescence of SrAl2O4:Ce(III), Dy, Eu nanotubes, nanowires and core-shells for people with disabilities: nano-emergency

Este estudo transversal está focado na propriedade de luminescência persistente do aluminato de estrôncio co-dopado com cério (III), disprósio (III) e európio (II), SrAl2O4:Ce3+, Dy3+, Eu2+, em sistemas de sinalização de áreas de risco e emergências para pessoas com deficiências. Na área da ciência e engenharia dos materiais, foram desenvolvidos novos materiais com características nanométricas, nanotubos, nanoarames e nanobastões luminescentes de SrAl2O4:Ce3+, Dy3+, Eu2+ para aplicações na área da reabilitação e acessibilidade de pessoas com deficiências. Os nanotubos foram obtidos a partir de micro- e nano-partículas precursoras sintetizadas por reacção do estado-sólido e tratamento térmico de recozedura (1273-1473 K). Os nanoarames e nanobastões foram preparados por moagem, sonificação e recozedura (373 K). Novas nanocápsulas de aluminatos luminescentes dopados com cério (III) e encapsulados com TiO2 foram criadas de modo a obter-se materiais multifuncionais, designadamente com acção fotocatalítica antimicrobiana, antibacteriana e resistência à água. Tais aluminatos podem ser amplamente aplicados como superfícies higiénicas, auto-limpantes, em biomateriais, no domínio de medicamentos antibióticos, na formulação de vacinas, e com ênfase à aplicação em cerâmicas fotoluminescentes. As metodologias de obtenção de tais nanoestruturas de aluminato de estrôncio dopado com cério (III) e do seu encapsulamento, desenvolvidas no âmbito desta tese, são aplicáveis a diversos aluminatos dopados com outros iões lantanídeos (Ln consiste em La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Tm ou Lu) com a fórmula M(1-x-y)N2O4:Cex, Lny, onde M é Be, Mg, Ca, Sr ou Ba. Na área da oftalmologia, foi desenvolvido um equipamento médico para o diagnóstico de biofuncionalidade das células retinais fotoreceptoras, e como suporte à telemedicina oftalmológica. Este equipamento foi utilizado para realizar testes de visão cromática FM100HUE em fundo branco/preto para a personalização de materiais luminescentes. Os resultados demonstraram uma biofuncionalidade celular à visibilidade fotópica das cores em fundo preto superior no grupo de tratamento, composto por pessoas com retinopatia diabética (n=38), em comparação ao grupo de referência (n=38). Estes resultados sugerem a recomendação de materiais com fotoluminescência persistente (λem=485-555 nm), incluindo SrAl2O4:Ce3+, Dy3+, Eu2+, para o referido grupo de tratamento, em sinalização de emergência e em ambientes de baixa iluminação. Na área da arquitectura, foi proposta uma nova aplicação dos referidos nanomateriais luminescentes à base de SrAl2O4:Ce3+, Dy3+, Eu2+ em cerâmica de revestimento, tendo em vista a sua boa visibilidade e uso por pessoas com deficiências. Novos pavimentos, cerâmicos, fotoluminescentes, foram desenhados com propriedades multisensoriais (contraste táctil, sonoro e visual) e antimicrobianas, para pessoas portadoras de deficiências utilizarem, no escuro, com a prioridade de salvar vidas em emergências. Tais pisos, com relevos, podem ser combinados de modo a compor um sistema exclusivo de sinalização fotoluminescente multisensorial que possibilita a rápida evacuação mediante o uso de auxílios de mobilidade (e.g. bengala, cadeira de rodas, andadores, muletas). A solução integrada de tais inovações que potencializa a propriedade de luminescência persistente de SrAl2O4:Ce3+, Dy3+, Eu2+ de modo acessível para as pessoas com deficiências, pode contribuir para salvar vidas, no escuro, em emergências.

Qualidade de vida e doença mental

Atendendo à conjuntura nacional e internacional que norteia a saúde mental e psiquiatria, a Qualidade de Vida (QDV) das pessoas com doença mental torna-se uma área fundamental de investigação, tendo em conta a sua inquestionável importância na aferição de medidas de intervenção. Um facto observável relaciona-se com um interesse crescente nos últimos anos na QDV da pessoa com doença mental como objeto de investigação. Estudos apontam para que as pessoas com doença mental percecionem a sua QDV inferior às pessoas sem doença mental e/ou com doenças físicas. Esta investigação foi realizada com base em três estudos. O Estudo I pretendeu estudar relações entre variáveis sociodemográficas e clínicas e a QDV de pessoas (n = 39) com doenças do humor (Depressão Major, Distimia, Doença Bipolar e Perturbações Depressivas Sem Outra Especificação). Para isso, foram utilizados o WHOQOL-Bref, o Índice de Graffar, um Questionário de Dados Sociodemográficos e Clínicos e um Guia de Observação. Os dados foram recolhidos no domicílio dos sujeitos. No Estudo II compararam-se diferenças de QDV em duas amostras independentes: sujeitos com doenças do humor (n = 39) e sujeitos sem doença mental diagnosticada (n = 39). Utilizaram-se os mesmos instrumentos do Estudo I exceto o Guia de Observação. Nestes dois estudos os dados foram tratados recorrendo ao IBM SPSS Statistics, versão 19.0. O Estudo III teve como objetivo recolher dados sobre as narrativas dos sujeitos com doença mental e sobre o conhecimento sobre a Rede Nacional de Cuidados Continuados e Integrados de Saúde Mental (RNCCISM). Para esta segunda parte do objetivo foi utilizada uma amostra de profissionais de saúde mental (n = 42) que respondeu a um Questionário sobre a RNCCISM construído para o efeito. Este Instrumento foi validado e do qual resultou uma variável final: “avaliação do conhecimento sobre a RNCCISM”. Os resultados desta pesquisa sugeriram, pelo Estudo I, que a QDV difere em função da doença apresentada pelos sujeitos; encontraram-se também diferenças em relação à idade, sexo, escolaridade, classe social, estado civil e transportes utilizados para a consulta de especialidade. Pelo Estudo II, os resultados indicaram-nos diferenças entre a QDV nos dois grupos, sendo que, o Grupo com doença do humor apresenta scores mas baixos em todos os domínios do WHOOL-Bref que o Grupo sem doença mental diagnosticada. Os dados do EstudoIII sugeriram-nos: i) no primeiro momento, uma reflexão que girou em torno de cinco eixos: o sofrimento; a estigmatização; os eventos de vida perturbadores; o modelo de tratamento adotado pelos profissionais; e o acompanhamento das pessoas com doença mental; ii) no segundo momento, que os enfermeiros são os que, em média, possuíam um score de conhecimento sobre a RNCCISM mais baixo. Esta investigação sugeriu que a QDV das pessoas com doença mental é baixa, indicando algumas relações entre algumas variáveis. Durante o seu desenvolvimento, pretendemos também reforçar a necessidade do envolvimento de todos os profissionais da saúde nas alterações preconizadas, o que permite intervir de forma mais informada. Porque, durante este percurso surgiram dificuldades sérias de acesso à amostra clínica, esta tese chama ainda a atenção para a importância da investigação em saúde mental e psiquiatria e para as formalidades de acesso aos dados que a podem condicionar. De facto, ao assumirmos a QDV como uma medida de resultado em saúde, torna-se importante, por um lado, aprofundar a investigação neste domínio e, por outro, e pelo conhecimento de que já dispomos, equacionar de forma efetiva novas modalidades de intervenção, contribuindo para um plano terapêutico mais amplo, pondo em prática uma filosofia de cuidados mais abrangente e de continuidade, implementando as politicas comunitárias e globais preconizadas para a prestação de cuidados em saúde mental e psiquiatria.

Benchmarking therapeutic drug monitoring software: A review of available computer tools

Therapeutic drug monitoring (TDM) aims to optimize treatments by individualizing dosage regimens based on the measurement of blood concentrations. Dosage individualization to maintain concentrations within a target range requires pharmacokinetic and clinical capabilities. Bayesian calculations currently represent the gold standard TDM approach but require computation assistance. In recent decades computer programs have been developed to assist clinicians in this assignment. The aim of this survey was to assess and compare computer tools designed to support TDM clinical activities. The literature and the Internet were searched to identify software. All programs were tested on personal computers. Each program was scored against a standardized grid covering pharmacokinetic relevance, user friendliness, computing aspects, interfacing and storage. A weighting factor was applied to each criterion of the grid to account for its relative importance. To assess the robustness of the software, six representative clinical vignettes were processed through each of them. Altogether, 12 software tools were identified, tested and ranked, representing a comprehensive review of the available software. Numbers of drugs handled by the software vary widely (from two to 180), and eight programs offer users the possibility of adding new drug models based on population pharmacokinetic analyses. Bayesian computation to predict dosage adaptation from blood concentration (a posteriori adjustment) is performed by ten tools, while nine are also able to propose a priori dosage regimens, based only on individual patient covariates such as age, sex and bodyweight. Among those applying Bayesian calculation, MM-USC*PACK© uses the non-parametric approach. The top two programs emerging from this benchmark were MwPharm© and TCIWorks. Most other programs evaluated had good potential while being less sophisticated or less user friendly. Programs vary in complexity and might not fit all healthcare settings. Each software tool must therefore be regarded with respect to the individual needs of hospitals or clinicians. Programs should be easy and fast for routine activities, including for non-experienced users. Computer-assisted TDM is gaining growing interest and should further improve, especially in terms of information system interfacing, user friendliness, data storage capability and report generation.

Letter to Mr. Walsh, Registrar Office, 1836

The man to whom the letter is addressed is Francis Leigh Walsh who was a land surveyor and registrar. Mr. Walsh was born on March 12, 1789 in Harford County, Maryland to Thomas Welsh, a United Empire Loyalist. In 1793, his family moved to Norfolk County and in 1810, Francis succeeded his father as registrar for Norfolk County. During the War of 1812 he served in the local militia and became a captain in 1824. He was the representative for Norfolk in the legislative assembly of Upper Canada from 1820 to 1828 and 1834 to 1836. He became justice of the peace in the London district in 1821 and 1838 in the Talbot district. He died in Simcoe on Oct. 14th, 1884. His son, Aquila Walsh served in the Legislative Assembly of the Province of Canada and in the Canadian House of Commons. Benjamin Hardison was born in Berwick in the Thirteen Colonies (British colonies on the Atlantic Coast of North America) on April 2, 1757 to Thomas Hardison and Mary Chadbourne. He was a farmer, miller and political figure. He was the representative for 4th Lincoln and Norfolk in the Legislative Assembly of Upper Canada from 1797-1800. On January 21, 1800 he married Jane Warren. He served with the American forces during the American Revolution at which time he was taken prisoner and sent to Canada. Later, he settled in Fort Erie where he was a captain in the militia and a justice of the peace for the Niagara district. He operated mills and a distillery in Fort Erie and died there on July 26, 1823. Source: http://en.vionto.com/show/me/Francis+Leigh+Walsh http://en.wikipedia.org/wiki/Benjamin_Hardison

William Hamilton Merritt Welland Canal circular, July 12, 1823

William Hamilton Merritt (1793-1862) was a soldier, merchant, and politician who was instrumental in the promotion and development of the Welland Canal. After serving with the Lincoln militia during the War of 1812, Merritt became a merchant in St. Catharines, and purchased some land on Twelve Mile Creek on which he ran a sawmill and constructed a grist mill. He initially envisioned a canal between the Welland River and Twelve Mile Creek, which evolved into a plan to link Lake Ontario and Lake Erie. This would enable goods from western Canada to be conveniently shipped to Montreal and Great Britain through the St. Lawrence, while bypassing the Niagara portage. His plan met with opposition for financial and political reasons, as well as from those along the Niagara portage whose businesses would suffer if the canal were built. Despite this opposition, the Welland Canal Company was chartered by the Upper Canadian assembly in January, 1824. Construction on the canal began later that year, and was completed in 1829.

William Hamilton Merritt Welland Canal circular, July 12, 1823

William Hamilton Merritt (1793-1862) was a soldier, merchant, and politician who was instrumental in the promotion and development of the Welland Canal. After serving with the Lincoln militia during the War of 1812, Merritt became a merchant in St. Catharines, and purchased some land on Twelve Mile Creek on which he ran a sawmill and constructed a grist mill. He initially envisioned a canal between the Welland River and Twelve Mile Creek, which evolved into a plan to link Lake Ontario and Lake Erie. This would enable goods from western Canada to be conveniently shipped to Montreal and Great Britain through the St. Lawrence, while bypassing the Niagara portage. His plan met with opposition for financial and political reasons, as well as from those along the Niagara portage whose businesses would suffer if the canal were built. Despite this opposition, the Welland Canal Company was chartered by the Upper Canadian assembly in January, 1824. Construction on the canal began later that year, and was completed in 1829