Sintaxe e semântica do verbo ser no romance em nome da terra de Vergílio Ferreira

O meu encontro literário com Vergílio Ferreira deu-se há cerca de seis ou sete anos, quando resolvi comprar e ler Cartas a Sandra, romance que como o nome indica é escrito como se de uma compilação de cartas se tratasse e que foi deixado incompleto e editado postumamente. Esta edição póstuma é da responsabilidade da herdeira (esposa do autor) e do Círculo de Leitores. Inicialmente, confesso, fui seduzida pelo título, mas depois, a leitura da obra deixou uma vontade sôfrega de querer saber mais sobre a escrita vergiliana. Nas disciplinas de literatura da minha licenciatura, pouco ou nada se tratou sobre Vergílio Ferreira mas, apesar disso, encetei algumas pesquisas e leituras que me foram despertando, cada vez mais, o interesse e a predilecção pelas obras deste autor. Mais tarde, já no Curso de Mestrado, ponderei a possibilidade de uma abordagem ao romance em nome da terra e sobre o qual tinha conhecimento da existência de alguns trabalhos, na sua maioria, ao nível da análise literária e/ou estilística. Com uma apetência natural para a área da linguística, considerei com carinho a hipótese de elaborar uma Dissertação de Mestrado que se aproximasse mais do campo da interpretação e análise linguísticas, nomeadamente do valor do verbo Ser na escrita vergiliana e, em particular, no romance-problema em jeito de carta. Consciente de que a tarefa não iria ser fácil, que teria, necessariamente, que envolver a leitura e releitura (nalguns casos de modo transversal) de todo um conjunto de produções, quer do autor, quer dos que ao seu estudo se dedicaram, quer ainda de obras de carácter filosófico e existencialista, foi com agrado que comecei a minha pesquisa e, a posteriori, a selecção dos materiais que julguei pertinentes para a prossecução do objectivo que me tinha proposto. Por conseguinte, tenho que agradecer a todas as pessoas que me ajudaram, de uma ou de outra forma, em especial ao Professor Doutor João Malaca Casteleiro, pelo facto de ter aceite o meu pedido de orientação da presente Dissertação, pela sua disponibilidade e paciência, pela cedência de alguns materiais, pelos seus comentários sábios e experientes e, acima de tudo, pela sua sabedoria na matéria e pelo interesse demonstrado quanto ao tema, o que se traduz, ao que julgo, naquilo que se entende, verdadeiramente, por orientação de uma Dissertação de Mestrado. Agradeço também aos colegas do curso que me motivaram, em particular à Judite e à Natália, que tiveram a coragem de assumir um compromisso de amizade, pelo facto de me ouvirem, questionarem e, principalmente criticarem e encorajarem aquando das nossas discussões sobre este meu trabalho. Por último, não poderia deixar de referir e agradecer igualmente a simpatia com que fui recebida pela Dona Augusta e pelo senhor professor José Rodrigues, na Vila Josephine1, morada de férias de Vergílio Ferreira, em Melo, e onde foram escritos muitos dos seus trabalhos (nas férias grandes, com uma caneta de nanquim virada ao contrário, para conseguir uma caligrafia mais fina e apurada, e num sofá cor-de-rosa-velho, ao pé da janela, com uma tábua nos joelhos a servir de escritório, o cinzeiro do lado esquerdo2). Gostaria ainda de agradecer a sua pronta e sábia ajuda, por terem partilhado comigo detalhes sobre o autor e que não vêm nos livros, sendo o Professor, ele próprio, um livro aberto no que se refere ao seu cunhado e amigo Vergílio, aos seus trabalhos, à sua vontade de valorizar um escritor que lhe foi tão próximo... Agradeço-lhe ainda o privilégio de me ter permitido trabalhar um pouco no escritório do autor. Esse momento proporcionou-me mais uma de muitas alegrias breves de que tem sido constituída a minha também breve existência, e a consciencialização para o facto de que o meu caminho ainda fica muito longe e, fazendo uso de palavras de Vergílio Ferreira: “A estrada é larga e segura porque foi construída apenas pela experiência dos homens. Não percas mais os teus passos pela areia movediça e estéril…”. Procurarei, pois, seguir estes e outros sábios conselhos, à medida que desenvolver este trabalho.

Contributo para a caracterização geológica e geotécnica dos diferentes complexos vulcânicos da Ilha da Madeira

Este trabalho permite oferecer uma contribuição para a caracterização geológica-geotécnica dos três complexos vulcânicos da ilha da Madeira, através de sete amostras de material geológico, pertencentes a quatro das sete unidades vulcano-estratigráficas presentes na ilha. São estudados materiais da Unidade do Porto da Cruz (CVI 1), da Unidade da Encumeada (CVM 1), da Unidade dos Lombos (CVS 1) e da Unidade do Funchal (CVS 2), correspondendo a rochas vulcânicas muito alteradas, solos sedimentares, tufos, basaltos e mugearitos, respectivamente. No âmbito da caracterização geológica, é efectuada uma classificação litológica do material amostrado. Também é realizado um estudo das descontinuidades dos maciços onde se efectuaram as amostragens, em função dos parâmetros atitude, espaçamento, abertura, rugosidade, preenchimento, extensão e n.º de famílias de descontinuidades. No âmbito da caracterização geotécnica, é realizada uma campanha de ensaios laboratoriais aos materiais rochosos e terrosos, de forma a determinar uma série de parâmetros geotécnicos. Os ensaios realizados para as amostras de solo são: análise granulométrica; determinação do teor em água; determinação do teor em cinzas e matéria orgânica; determinação da densidade das partículas; determinação do equivalente de areia; e determinação dos limites de consistência (limites de Atterberg). Para as amostras de rochas, são efectuados ensaios para a determinação dos seguintes parâmetros: absorção de água à pressão atmosférica; massa volúmica aparente seca; resistência à compressão uniaxial; módulo de deformabilidade; e resistência à compressão deduzida através da dureza de ressalto de Schmidt. Após a caracterização geológica-geotécnica dos materiais amostrados, é efectuada uma análise de resultados, bem como uma comparação com resultados de outras referências bibliográficas. Este trabalho é um contributo para um banco de dados geológicos e geotécnicos sobre os complexos vulcânicos da ilha da Madeira, deixando em aberto a continuidade de estudos nesta temática.

Durabilidade do betão: caracterização de amostras de betão recolhidas ao longo de dois túneis da Região Autónoma da Madeira

Na realização deste trabalho pretendeu-se caracterizar amostras de betão recolhidas ao longo de dois túneis da Região Autónomo da Madeira com o objetivo de traçar um perfil de composição e relacionar com a durabilidade. Para tal foram recolhidas amostras em dois túneis, o Túnel da Cruz Vermelha e o Túnel da Encumeada. De modo a caracterizar o betão foram realizados ensaios de carbonatação, determinação do teor de cloretos em profundidade em laboratório, termogravimétrica, análise macroestrutural e de difração raios X. Realizou-se uma previsão de quando é que as armaduras poderão deixar de estar passivadas devido a carbonatação (período de iniciação) e quando é que os túneis deverão ser alvos de reparações devido a corrosão (período de propagação). Tentou-se verificar a influência da carbonatação em altura no Túnel da Cruz Vermelha. Demonstrou-se que a fissuração é uma zona de fácil acesso para as substâncias agressivas penetrarem para o interior do betão, nomeadamente o dióxido de carbono relacionado com a carbonatação. Demonstrou-se também que é possível determinar a profundidade carbonatação através da difração de raios X. Verificou-se que o método (difração de Raio X) usado para determinar a composição do betão de ambos os túneis é viável. Constatou-se que praticamente todas as carotes apresentam pontos com valores de cloretos superiores aos permitidos pela norma atualmente em vigor (NP EN 206-1: 2007). Uma das possíveis razões para esses valores é o facto de na RAM, a areia utilizada no fabrico do betão ser de origem marítima. Em termos da profundidade de carbonatação verificou-se que praticamente em todas as amostras, o valor determinado ainda não tinha alcançado as armaduras e deste modo encontravam-se passivadas, com exceção a carote nº10 (Túnel Encumeada) em que a carbonatação já tinha ultrapassado o valor do recobrimento e a armadura já apresentava sinais de corrosão.

Espaços de pobreza e mobilidade urbana: os deslocamentos da população de baixa renda em Natal/RN

This dissertation is an attempt to understand how families with an income of up to three minimum wages and living in different Areas of Demographic Expansion (AEDs) of Natal municipality specifically in the districts of Igapó and Salinas (North Administrative Zone of the city), Ponta Negra (South Administrative Zone), Santos Reis, Praia do Meio, Areia Preta and Mãe Luíza (East Administrative Zone) and Felipe Camarão (West Administrative Zone) solve their problems of urban mobility. It is, therefore, a reflection upon the mobility needs of poor urban households as expressed in terms of origin-destiny displacements for specific movements (house-work, house-school, house-shopping, house-healthcare and house-leisure), all of which being analyzed within the relationship between public transportation and poverty spaces of the city. In order to develop the study, theoretical aspects and themes related to the production of the urban space, to social and spatial segregation, to urban mobility and to transportation were confronted with the collected data referring to the urban population previously selected. One of the research main findings is the crucial role mobility plays in the social differentiation of such people living in Natal and that any policy for the improvement of their living conditions must take mobility issues into account

Estética do apocalipse: (re) considerações acerca da (des) arborização urbana de Natal e seu contributo à saúde pública

This study intends to establish a relation between environmental degradation, particularly the devastation of the green canopy, and public health. Utilizing a mapping of the trees included in the researched area, each individual tree was analyzed according to its age, taxonomic listing, architecture, shape and size (determined by aesthetic/convenience reasons or deformed by pruning). Initially investigated were the covert reasons lying underneath the constant aggression against trees (which many times seem to contain elements of hatred and contempt) within the urban environment. In addition to that, the aspects concerning environmental modifications and the consequent impact on public health were also assessed. Two main problems promptly emerged as a result of the removal of trees: a) without a canopy to protect the areas, they became subject to winds directly blown from SW Africa and impregnated with aerosol partic les, which are common causes for respiratory disorders and, b) direct UV solar radiation, which causes some types of skin cancers and eye disorders. To reach such results, we studied the origins and formation of UV radiation induced cancers and searched for the UV radiation spectra of action, e.g., usual intensity and quantity reaching clear and shadowed spaces in a certain area and its consequences. In a second instance, we also searched for pertinent data resources in order to confirm the increase of skin cancer cases due to exposure to UV radiation and the relation between the destruction of the green canopy and the above mentioned problems. We believe that a few significant results have been achieved by this study, namely: the relation between a culture based on medieval beliefs and its consequences on the environment; how this culture exploits and deforms nature in pursuit of financial and psychological interests to a point of transforming the landscape into a copy of something devoid of any relation to latitude and altitude; and above all, the indifference concerning the alarming results carried by these modifications

Análise do comportamento e crescimento do camarão branco Litopenaeus vannamei (Boone, 1931) em diferentes substratos inconsolidados

The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Estudo de revestimentos inorgânicos com inibidor de corrosão aplicado na superfície do concreto

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles