Energy-based modelling and simulation of the interconnection of a back-to-back converter and a doubly-fed induction machine

This paper describes the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/CA converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM). The B2B is a variable structure system (VSS), due to presence of control-actuated switches: however, from a modelling simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presented and, using a power-preserving interconnection, the Hamiltonian description of the whole system is obtained; detailed bond graphs of all subsystems and the complete system are also provided. Using passivity-based controllers computed in the Hamiltonian formalism for both subsystems, the whole model is simulated; simulations are run to rest the correctness and efficiency of the Hamiltonian network modelling approach used in this work.

Hakkuriteholähteen säädön suunnittelu

Diplomityö on tehty osana ETX-tutkimushanketta: 'Volyymiteholähteen suunnittelumetodien kehitys ja optimointi DFM-viitekehyksessä'. Työssä suunnitellaan hakkuriteholähteelle säätäjä. Tähän suunnittelun sektoriin syventyminen on teollisuudessa jäänyt monesti vähälle. Säätö on tavallisesti ajan puutteen ja apuvälineiden käytön osaamattomuuden tai puuttumisen takia suunniteltu kokeilemalla. Työssä muodostetaan jännitemuotoisesti säädetylle hakkurille piensignaalimallilla linearisoidut siirtofunktiot, joiden perusteella voidaan tarkastella hakkurin stabiilisuutta takaisinkytketyssä säätösilmukassa. Stabiiliustarkastelu tehdään taajuustasossa käyttäen Bode-kuvaajia. Näiden kuvaajien perusteella viritetään järjestelmään säätäjä. Säätäjän toimintaa aikatasossa tarkastellaan simuloimalla ja reaalisen laitteen toimimista laboratorioprototyypin avulla. Tulosten perusteella voidaan todeta, että jännitemuotoisella säädöllä flyback-hakkuri saadaan nopeaksi epäjatkuvalla käämivirralla. Mikäli halutaan hakkurin toimivan jatkuvalla käämivirralla, on syytä käyttää muita säätömenetelmiä, esimerkiksi huippuvirtasäätöä.

Sociodemographic Factors and Clinical Conditions Associated to Hospitalization in Influenza A (H1N1) 2009 Virus Infected Patients in Spain, 2009-2010

The emergence and pandemic spread of a new strain of influenza A (H1N1) virus in 2009 resulted in a serious alarm in clinical and public health services all over the world. One distinguishing feature of this new influenza pandemic was the different profile of hospitalized patients compared to those from traditional seasonal influenza infections. Our goal was to analyze sociodemographic and clinical factors associated to hospitalization following infection by influenza A(H1N1) virus. We report the results of a Spanish nationwide study with laboratory confirmed infection by the new pandemic virus in a case-control design based on hospitalized patients. The main risk factors for hospitalization of influenza A (H1N1) 2009 were determined to be obesity (BMI≥40, with an odds-ratio [OR] 14.27), hematological neoplasia (OR 10.71), chronic heart disease, COPD (OR 5.16) and neurological disease, among the clinical conditions, whereas low education level and some ethnic backgrounds (Gypsies and Amerinds) were the sociodemographic variables found associated to hospitalization. The presence of any clinical condition of moderate risk almost triples the risk of hospitalization (OR 2.88) and high risk conditions raise this value markedly (OR 6.43). The risk of hospitalization increased proportionally when for two (OR 2.08) or for three or more (OR 4.86) risk factors were simultaneously present in the same patient. These findings should be considered when a new influenza virus appears in the human population.

Sociodemographic Factors and Clinical Conditions Associated to Hospitalization in Influenza A (H1N1) 2009 Virus Infected Patients in Spain, 2009-2010

The emergence and pandemic spread of a new strain of influenza A (H1N1) virus in 2009 resulted in a serious alarm in clinical and public health services all over the world. One distinguishing feature of this new influenza pandemic was the different profile of hospitalized patients compared to those from traditional seasonal influenza infections. Our goal was to analyze sociodemographic and clinical factors associated to hospitalization following infection by influenza A(H1N1) virus. We report the results of a Spanish nationwide study with laboratory confirmed infection by the new pandemic virus in a case-control design based on hospitalized patients. The main risk factors for hospitalization of influenza A (H1N1) 2009 were determined to be obesity (BMI≥40, with an odds-ratio [OR] 14.27), hematological neoplasia (OR 10.71), chronic heart disease, COPD (OR 5.16) and neurological disease, among the clinical conditions, whereas low education level and some ethnic backgrounds (Gypsies and Amerinds) were the sociodemographic variables found associated to hospitalization. The presence of any clinical condition of moderate risk almost triples the risk of hospitalization (OR 2.88) and high risk conditions raise this value markedly (OR 6.43). The risk of hospitalization increased proportionally when for two (OR 2.08) or for three or more (OR 4.86) risk factors were simultaneously present in the same patient. These findings should be considered when a new influenza virus appears in the human population

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

Modeling and Parameter Estimation of Double-Star Permanent Magnet Synchronous Machines

The power rating of wind turbines is constantly increasing; however, keeping the voltage rating at the low-voltage level results in high kilo-ampere currents. An alternative for increasing the power levels without raising the voltage level is provided by multiphase machines. Multiphase machines are used for instance in ship propulsion systems, aerospace applications, electric vehicles, and in other high-power applications including wind energy conversion systems. A machine model in an appropriate reference frame is required in order to design an efficient control for the electric drive. Modeling of multiphase machines poses a challenge because of the mutual couplings between the phases. Mutual couplings degrade the drive performance unless they are properly considered. In certain multiphase machines there is also a problem of high current harmonics, which are easily generated because of the small current path impedance of the harmonic components. However, multiphase machines provide special characteristics compared with the three-phase counterparts: Multiphase machines have a better fault tolerance, and are thus more robust. In addition, the controlled power can be divided among more inverter legs by increasing the number of phases. Moreover, the torque pulsation can be decreased and the harmonic frequency of the torque ripple increased by an appropriate multiphase configuration. By increasing the number of phases it is also possible to obtain more torque per RMS ampere for the same volume, and thus, increase the power density. In this doctoral thesis, a decoupled d–q model of double-star permanent-magnet (PM) synchronous machines is derived based on the inductance matrix diagonalization. The double-star machine is a special type of multiphase machines. Its armature consists of two three-phase winding sets, which are commonly displaced by 30 electrical degrees. In this study, the displacement angle between the sets is considered a parameter. The diagonalization of the inductance matrix results in a simplified model structure, in which the mutual couplings between the reference frames are eliminated. Moreover, the current harmonics are mapped into a reference frame, in which they can be easily controlled. The work also presents methods to determine the machine inductances by a finite-element analysis and by voltage-source inverters on-site. The derived model is validated by experimental results obtained with an example double-star interior PM (IPM) synchronous machine having the sets displaced by 30 electrical degrees. The derived transformation, and consequently, the decoupled d–q machine model, are shown to model the behavior of an actual machine with an acceptable accuracy. Thus, the proposed model is suitable to be used for the model-based control design of electric drives consisting of double-star IPM synchronous machines.

The role of physical activity and perceived adequacy on cardiorespiratory fitness in children with developmental coordination disorder

Evidence suggests that children with developmental coordination disorder (DCD) have lower levels of cardiorespiratory fitness (CRF) compared to children without the condition. However, these studies were restricted to field-based methods in order to predict V02 peak in the determination of CRF. Such field tests have been criticised for their ability to provide a valid prediction of V02 peak and vulnerability to psychological aspects in children with DCD, such as low perceived adequacy toward physical activity. Moreover, the contribution of physical activity to the variance in V02 peak between the two groups is unknown. The purpose of our study was to determine the mediating role of physical activity and perceived adequacy towards physical activity on V02 peak in children with significant motor impairments. This prospective case-control design involved 122 (age 12-13 years) children with significant motor impairments (n=61) and healthy matched controls (n=61) based on age, gender and school location. Participants had been previously assessed for motor proficiency and classified as a probable DCD (p-DCD) or healthy control using the movement ABC test. V02 peak was measured by a progressive exercise test on a cycle ergometer. Perceived adequacy was measured using a 7 -item subscale from Children's Selfperception of Adequacy and Predilection for Physical Activity scale. Physical activity was monitored for seven days with the Actical® accelerometer. Children with p-DCD had significantly lower V02 peak (48.76±7.2 ml/ffm/min; p:50.05) compared to controls (53.12±8.2 ml/ffm/min), even after correcting for fat free mass. Regression analysis demonstrated that perceived adequacy and physical activity were significant mediators in the relationship between p-DCD and V02 peak. In conclusion, using a stringent laboratory assessment, the results of the current study verify the findings of earlier studies, adding low CRF to the list of health consequences associated with DCD. It seems that when testing for CRF in this population, there is a need to consider the psychological barriers associated with their condition. Moreover, strategies to increase physical activity in children with DCD may result in improvement in their CRF.

Physical Activity and Fitness in Children with Developmental Disorder

Introduction: Developmental coordination disorder (DCD) is a prevalent condition characterized by poor motor proficiency that interferes with a child‟s activities of daily living. Children with DCD often experience compromised health-related fitness components such as cardiorespiratory fitness (CRF). Purpose: To better understand the physical activity and fitness characteristics of children with probable DCD (pDCD), with a particular focus on CRF. Specifically: (1) to present a synopsis of current literature; (2) to determine the longitudinal trajectories of CRF; (3) to compare the submaximal CRF of children with and without pDCD. Methods: A comprehensive, systematic literature review was conducted of the recent available data on fitness and physical activity and pDCD (Chapter 2). This review provided the background for the other two studies included in this thesis. In Chapter 3, a prospective cohort design was used to assess how CRF in children with pDCD changes over time (56 months) relative to a group of typically developing controls. Using a nested-case control design, 63 subjects with pDCD and 63 matched controls from the larger sample were recruited to participate in the lab-based component of the study (Chapter 4). In this investigation CRF was examined using the oxygen cost of work (VO2) during an incremental test on a cycle ergometer. Results: The literature review showed that fitness parameters, including CRF and physical activity levels, were consistently reduced in children with pDCD. Chapter 3 demonstrated that the difference in CRF between children with pDCD and typically developing children is substantial, and that it tends to increase over time. Results from VO2 assessments showed that children with pDCD utilized more oxygen to sustain the same submaximal workloads compared to typically developing children. Conclusions: Findings from this thesis have made several important contributions to our understanding of children with pDCD. Since differences in CRF between children with and without pDCD tend to worsen over time, this adds to the argument that interventions intended to improve CRF may be appropriate for children with motor difficulties. This thesis also presented the first evidence suggesting that DCD involves higher energy expenditure, and could help explain why children with pDCD perform poorly on tasks requiring CRF.

Automatic Analysis and Synthesis of Controllers for Dynamical Systems Based On P

I present a novel design methodology for the synthesis of automatic controllers, together with a computational environment---the Control Engineer's Workbench---integrating a suite of programs that automatically analyze and design controllers for high-performance, global control of nonlinear systems. This work demonstrates that difficult control synthesis tasks can be automated, using programs that actively exploit and efficiently represent knowledge of nonlinear dynamics and phase space and effectively use the representation to guide and perform the control design. The Control Engineer's Workbench combines powerful numerical and symbolic computations with artificial intelligence reasoning techniques. As a demonstration, the Workbench automatically designed a high-quality maglev controller that outperforms a previous linear design by a factor of 20.

Factores de riesgo perinatales para sobrepeso y obesidad en escolares en una población bogotana

Objetivo: Evaluar el impacto de los factores maternos y perinatales: peso previo al embarazo, presencia de hipertensión, diabetes y tabaquismo, peso al nacer y tiempo de lactancia con el desarrollo de sobrepeso y obesidad en los niños de 5 a 10 años en una población bogotana. Materiales y métodos: se realizó un diseño de casos y controles no pareado, incluyendo 528 niños con sus respectivas madres con una relación 1:2, en quienes se identificaron los descritos, y también factores postnatales relevantes: dieta, ejercicio y tiempo de pantalla. Se analizó con un modelo de regresión logística binomial la importancia de cada uno para la patología Resultados:Se encontró una mayor prevalencia de casos en los estratos 1 y 2 comparados con los demás estratos (p= 0,034). También se encontraron diferencias en la prevalencia de sobrepeso y obesidad en las madres de los casos (27%; p =0,01), mayor ingesta calórica en el grupo de los controles (42,9% vs 30,9%; p= 0,04). En el modelo de regresión logística se encontró que los factores que en conjunto mostraron significancia estadística fueron, un peso al nacer mayor de 2500 gr OR 2,31(IC 95%:1,13-4,78 p=0,021), un IMC materno antes de la gestación > de 25 OR 3,42(IC 95%:1,42-8,29 p=0,06), peso al año mayor de 7,5 kg OR 2,77 (IC 95%:1,11-2,78 p=0,028) y una ingesta calórica entre 600 a 1900 calorías/día OR 1.58 (IC 95%:1,06-2,35 p=0,02).Conclusiones: son factores de riesgo para el desarrollo de la obesidad infantil, la progresión hacia un percentil superior en peso, antes el embarazo, nacimiento y primer año de vida.

Factores de riesgo para el desarrollo de tuberculosis multidrogorresistente en una población asegurada Colombia 2008 a 2011

La Tuberculosis es la segunda enfermedad infecciosa que más muertes ocasiona en adultos luego del VIH. La mayoría de casos pueden ser tratados adecuadamente con los antibióticos disponibles, sin embargo, la prevalencia de multidrogorresistencia está aumentando, generando más fallas en el tratamiento, mayores costos en el sistema de salud y mayor mortalidad. Objetivo: Determinar los factores de riesgo asociados al desarrollo de tuberculosis multidrogorresistente en pacientes de 18 años o más, afiliados a 3 Empresas Administradoras de Planes de Beneficios en Colombia, durante los años 2008 a 2011. Métodos: Se realizó un estudio de casos y controles emparejado, 1 a 4, 45 casos y 180 controles, de pacientes de la base de datos del programa de tuberculosis de 3 Empresas Administradoras de Planes de Beneficios, evaluando variables demográficas, socioeconómicas y clínicas. Resultados: La mediana de edad de los casos fue de 43 años y la de los controles de 39.5 años, en los casos predominó el sexo masculino con 73.3%, mientras que en los controles fue mayor el sexo femenino con 51.1%. Se encontró asociación estadísticamente significativa entre la tuberculosis multidrogorresistente y el sexo masculino (OR ajustado 4.47 IC 95% [1.01; 19.75]), seguridad social (OR ajustado 57.6 IC 95% [4.6; 712.8]) y tratamiento previo (OR ajustado 56.2 IC 95% [10.03; 314.79]. Conclusiones: Ser hombre y tener tratamiento previo para tuberculosis son factores de riesgo para el desarrollo de multidrogorresistencia. Es necesario realizar más estudios con el sistema de salud colombiano para profundizar en los hallazgos con respecto al régimen subsidiado y el desarrollo de Tuberculosis multidrogorresistente.

Delirium. Los factores de riesgo propios de los pacientes en la Fundación Cardioinfantil - Instituto de Cardiología. Estudio de casos y controles

Introducción: el delirium es el trastorno neuropsiquiátrico más frecuente entre pacientes hospitalizados, se asocia con aumento en el tiempo de hospitalización, complicaciones nosocomiales e incluso se le atribuye aumento de la mortalidad de forma independiente. Existen estudios acerca de factores de riesgo para la condición, enfocados en las patologías, medicaciones y antecedentes de los pacientes; sin embargo son escasos los que buscan identificar los factores propios de los pacientes y del proceso de hospitalización, el cual es el objetivo del presente. Metodología: se realizó un estudio con diseño de casos y controles, incluyendo pacientes de la Fundación Cardioinfantil - Instituto de Cardiología con diagnóstico de delirium, hospitalizados entre marzo de 2011 y marzo de 2013. Con una muestra calculada de 201 pacientes, 67 casos y 134 controles (2:1), se equiparó los grupos para edad, piso de hospitalización, tipo de habitación hospitalaria y la fecha de hospitalización, obteniendo las variables de interés. Resultados: se encontró distintas variables relacionadas con delirium, algunas de estas clásicamente asociadas con la condición, posterior al análisis de los datos, las variables más fuertemente relacionadas con la condición fueron el tipo de ingreso, escala visual análoga del dolor, índice de Barthel y el tiempo de estancia en urgencias. Discusión: en nuestra revisión, el presente estudio es el primero de nuestro medio que busca identificar los factores de riesgo dados por la condición basal de los pacientes en su ingreso al hospital, estos factores fácilmente identificables son de utilidad para la prevención de la condición.

¿Impactó el programa de Tutores Pares a sus tutores?

Introducción: El programa de Tutores Pares-TP es una iniciativa creada en la EMCS de la Universidad del Rosario que brinda acompañamiento académico a través de estudiantes-tutores a pares menos avanzados. Éste entrega a sus Tutores sistemáticamente, herramientas para desempeñarse armónicamente en el ejercicio de guía y provee habilidades para el manejo del saber. Este estudio busca explorar posibles ´impactos´ generados tras la participación de estudiantes de medicina como TPs dentro de un programa estructurado. Materiales y métodos: Estudio cualitativo que involucró la construcción y aplicación de encuestas a grupos focales –TPs, Docentes y Familiares- creadas a partir de seis ejes/categorías que enmarcan al médico ideal. Las respuestas obtenidas de preguntas cerradas –en escala valorativa- y de naturaleza abierta fueron sometidas a análisis descriptivo –modas- y triangulación. Resultados: 41 tutores, agrupados en 4 grupos de análisis, evidenciaron un impacto general positivo con predominio en habilidades interpersonales (60%,65%,66%,45%, respectivamente), funciones/actividades basadas en la práctica y mejoramiento (57%,67%,60%,45%) y la forma como se emplean los conocimientos (47%,70%,67%,48%). Ocho docentes encuestados consideraron relevante el impacto del programa en habilidades interpersonales-(49%), conocimientos-(42%) y la interacción con colegas-(38%). En los padres de familia hay consenso en el cambio en habilidades interpersonales, funciones basadas en la práctica y mejoramiento y en actitudes-valores ético/morales. Dichos resultados están en paralelo con las observaciones plasmadas en las preguntas abiertas. Conclusiones: Se evidenció un impacto general positivo en la formación y desempeño profesional tras la participación como TPs dentro del programa; hallazgo que soporta aquellos publicados de experiencias académicas similares.

Invasive neural prosthesis for neural signal detection and nerve stimulation

This paper specifically examines the implantation of a microelectrode array into the median nerve of the left arm of a healthy male volunteer. The objective was to establish a bi-directional link between the human nervous system and a computer, via a unique interface module. This is the first time that such a device has been used with a healthy human. The aim of the study was to assess the efficacy, compatibility, and long term operability of the neural implant in allowing the subject to perceive feedback stimulation and for neural activity to be detected and processed such that the subject could interact with remote technologies. A case study demonstrating real-time control of an instrumented prosthetic hand by means of the bi-directional link is given. The implantation did not result in infection, and scanning electron microscope images of the implant post extraction have not indicated significant rejection of the implant by the body. No perceivable loss of hand sensation or motion control was experienced by the subject while the implant was in place, and further testing of the subject following the removal of the implant has not indicated any measurable long term defects. The implant was extracted after 96 days. Copyright © 2004 John Wiley & Sons, Ltd.

Cultured neural networks

This special section contains papers addressing various aspects associated with the issue Of Cultured neural networks. These are networks, that are formed through the monitored growth of biological neural tissue. In keeping with the aims of the International Journal of Adaptive Control and Signal Processing, the key focus of these papers is to took at particular aspects of signal processing in terms of both stimulating such a network and in assigning intent to signals collected as network outputs. Copyright (C) 2009 John Wiley & Sons, Ltd.