小麦杂交坏死蛋白质组学研究

小麦杂交坏死是某些小麦杂交种表现出的叶片提前逐渐死亡的现象。它是由两个坏死基因Ne1和Ne2在杂交种中相遇后发生显性互补引起的。坏死从叶片尖端逐渐过渡到叶片基部，从成熟叶片发展到幼嫩叶片。一些严重坏死的F1完成它的生活周期前就在不同的生长阶段死去，无法获得F1种子，这就限制了携带优良性状的亲本的选择和优良基因的交流。另外，小麦杂交坏死是一个独特的研究植物程序性死亡的遗传系统。虽然小麦杂交坏死这种现象已经发现很多年，但其详细的分子机理却仍然未知。对小麦杂交坏死的分子机理进行深入研究将有助于克服小麦杂交利用中杂交坏死的遗传障碍，此外，也为深入研究植物的PCD机理提供可操作靶分子。 本论文采用高通量蛋白质组研究技术对小麦杂交坏死进行了研究。携带坏死基因Ne2的小麦品种Pan555（P）和携带坏死基因Ne2的小麦品种Zheng891（Z）生长发育完全正常，将两个亲本杂交，所得杂交F1代PZF1表现杂交坏死。在小麦生长阶段8，旗叶（Flag leaf）刚刚出现，PZF1的旗叶下第一片叶子（FL-1）还是完全绿色，FL-2叶尖开始有坏死斑出现。在这个阶段，分别将PZF1，P，Z的FL-2叶剪成相等的尖，中，基三段。我们选择的PZF1的FL-2叶，其叶尖段已经有成片的坏死斑出现;中间段零星出现少量坏死斑点;基部段和亲本一样还是完全的绿色，代表坏死进程中的不同阶段。又选PZF1的FL-1和FL-2分别代表杂交坏死启动前和杂交坏死启动后。两个亲本P和Z的FL-2叶的三段及FL-1叶正常，都是完全绿色。 首先分别分析了PZF1，P和Z的FL-2叶的尖、中、基三段的蛋白表达情况。在PZF1的尖、中、基三段共检测到23个差异表达蛋白点。这23个点在两个亲本的尖、中、基三段中的表达丰度没有显著差异（p<0.05），说明这23个蛋白的差异表达不是由于叶段的不同引起，确与杂交坏死相关。对这23个蛋白进行了MALDI-TOF质谱鉴定，其中18个得到成功鉴定。然后对PZF1，P和Z的FL-1叶和FL-2叶的蛋白表达情况进行了分析。与PZF1的FL-1叶比较，在FL-2叶中检测到19个蛋白上调，20个蛋白下调。这39个蛋白的丰度在两个亲本的FL-1和FL-2叶之间没有显著差异，说明这39个蛋白的差异表达不是由于叶位的不同引起，确与杂交坏死相关。对这39个蛋白进行质谱鉴定其中26个得到成功鉴定。 根据被鉴定蛋白的功能及其表达丰度的变化，对这些蛋白在小麦杂交坏死中可能的作用进行了讨论。与PZF1的FL-2叶基部相比，S-腺苷同型半胱氨酸水解酶（S-adenosyl homocysteine hydrolase）在中部极显著（p<0.01）下调，而在中部和尖段之间没有显著差异，保持低丰度不变。腺苷甲硫氨酸3（AdoMet synthase 3）和甲硫氨酸合成酶1（Methionine synthase 1）都在PZF1的FL-2叶尖段上调。甲基化循环中的这3个酶比例的不协调可能会以不同的方式加速细胞老化。 与PZF1的FL-1叶比较，尿卟啉环脱羧酶（Uroporphyrinogen decarboxylase）在FL-2叶中下调，这将引起尿卟啉环III的积累。脂加氧酶（Lipoxygenases）在FL-2叶中上调。尿卟啉环III的积累和脂加氧酶的上调都会引起细胞内活性氧的增加。另外活性氧和脂加氧酶都会使脂发生过氧化作用，进而导致细胞膜完整性受到破坏，最终可能导致细胞死亡。 与基部段比较，在PZF1的FL-2叶的尖段和/或中间段;以及与PZF1的FL-1叶比较，在FL-2叶中，都有很多防御性蛋白的上调，这暗示应对活性氧、脂过氧化、甲基化循环中三个酶比例的不协调等引起的对细胞的破坏作用，细胞可能启动了抗细胞死亡系统来应对这种细胞内部的胁迫。 然而，与基部段比较，一些能量相关蛋白在PZF1的FL-2叶的尖段和/或中间段;以及与PZF1的FL-1叶比较，在FL-2叶中的异常表达可能会以干扰能量循环的方式加速细胞死亡。另外，与FL-2基部段比较，在尖段和/或中间段，以及与PZF1的FL-1比较，在FL-2中，都有一些防御性蛋白、蛋白合成相关的蛋白以及单链DNA结合蛋白下调，它们的变化可能会降低细胞的抵抗力，蛋白合成能力以及DNA修复能力。细胞正常代谢的很多方面都受到干扰从而使PZF1叶细胞最终走向死亡。 本研究中发现了三个甲基化循环中的酶变化，而且S-腺苷同型半胱氨酸水解酶是在坏死进程的较早阶段发生下调，它的变化可能是小麦杂交坏死的一个诱因，这暗示小麦杂交坏死可能是一个表观遗传学事件。另外本研究还发现一些和活性氧，脂氧化等相关的蛋白的变化，而活性氧增加和脂氧化都是细胞凋亡的典型特征。所以本研究为表观遗传细胞凋亡和氧化胁迫细胞凋亡的研究提供了很有价值的信息。

溅射离子泵的电源

本实用新型为一种用于向抽取高真空的溅射离子泵供电的电源。本实用新型是将现有电源的输出端改为并联设置的至少两组与溅射离子泵相连接的接线端。本实用新型可以同时向至少两台溅射离子泵供电。

Development of modelling method selection tool for health services management: From problem structuring methods to modelling and simulation methods

Background: There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. Aim. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. Methods. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). Results: The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. Conclusions: A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection. © 2011 Jun et al.

Machine Vision-Based Infrastructure As-Built Documentation Using Edge Points

The existing machine vision-based 3D reconstruction software programs provide a promising low-cost and in some cases automatic solution for infrastructure as-built documentation. However in several steps of the reconstruction process, they only rely on detecting and matching corner-like features in multiple views of a scene. Therefore, in infrastructure scenes which include uniform materials and poorly textured surfaces, these programs fail with high probabilities due to lack of feature points. Moreover, except few programs that generate dense 3D models through significantly time-consuming algorithms, most of them only provide a sparse reconstruction which does not necessarily include required points such as corners or edges; hence these points have to be manually matched across different views that could make the process considerably laborious. To address these limitations, this paper presents a video-based as-built documentation method that automatically builds detailed 3D maps of a scene by aligning edge points between video frames. Compared to corner-like features, edge points are far more plentiful even in untextured scenes and often carry important semantic associations. The method has been tested for poorly textured infrastructure scenes and the results indicate that a combination of edge and corner-like features would allow dealing with a broader range of scenes.