Effect of alkaline-earth metal composition on spectroscopic properties of Er3+ in fluorophosphate glasses

Optical spectroscopic properties of Er3+-doped alkaline-earth metal modified fluoropho sphate glasses have been investigated experimentally for developing broadband fiber and planar amplifiers. The results show a strong correlation between the alkaline-earth metal content and the spectroscopic parameters such as absorption and emission cross sections, full widths at half-maximum and Judd-Ofelt intensity parameters. It is found that strontium ions could have more influences on the Judd-Ofelt intensity parameters and the absorption and emission cross sections than other alkaline-earth metal ions such as Mg2+, Ca2+, Ba2+. The sample containing 23 mol% strontium fluoride exhibits the maximum emission cross section of 7.58 x 10(-21) cm(2), the broadest full width at half-maximum of 65 nm and the longer lifetime of 8.6 ms among the alkaline-earth metal modified fluorophosphates glasses studied. The Judd-Ofelt intensity parameter Omega(6)s, the emission cross sections and the full widths at half-maximum in the Er3+-doped fluorophosphate glasses studied are larger than in the silicate and phosphate glasses.

Utilização de sistema multiplex de marcadores do tipo INDELs em identificação humana por DNA

Os INDELs são polimorfismos de comprimento, gerados a partir de inserções e/ou deleções de um ou mais nucleotídeos. Os marcadores INDELs, que estão amplamente distribuídos pelo genoma e se caracterizam pela alta estabilidade devido à baixa taxa mutacional (10-9), podem ser analisados a partir da amplificação por PCR (Reação em Cadeia da Polimerase). A facilidade de análise e a possibilidade de construção de sistemas multiplex capazes de gerar amplicons curtos (menores que 100 pb) tornam os INDELs uma importante ferramenta para identificação humana por DNA. Para avaliar a eficiência e validar a metodologia que emprega os polimorfismos de inserção/deleção na identificação humana, utilizamos o sistema Indel-plex ID, capaz de amplificar simultaneamente 38 loci INDELs bialélicos de cromossomos autossomos. Diferentes amostras biológicas (cabelo, saliva, sangue, sêmen e urina) foram genotipadas apresentando reprodutibilidade entre todas as tipagens. A concentração mínima de DNA necessária para amplificação dos 38 loci INDELs foi de 0,5 ng. Artefatos do tipo split peaks foram observados em algumas amostras. Os produtos da PCR foram purificados em resina Sephadex proporcionando melhores condições de análise, redução de artefatos e aumento na intensidade média de fluorescência dos alelos amplificados. A eficiência do sistema Indel-plex ID na amplificação de DNA degradado foi verificada durante as análises das amostras de DNA extraídas de restos mortais (ossos e dentes). Comparativamente ao sistema Identifiler, o Indel-plex ID, se mostrou mais eficiente em termos de número de loci genotipados e qualidade de amplificação. Nas investigações de vínculos genéticos realizadas com o sistema Indel-plex ID foi possível corroborar resultados anteriores obtidos pela análise de marcadores STR. Nas análises com amostras in vivo foram obtidos valores máximos de Probabilidades de Paternidade de 99,99998%. Para casos envolvendo supostos pais falecidos, o sistema Indel-plex ID reforçou resultados obtidos com o sistema Identifiler e Minifiler. A Probabilidade de Paternidade de 99,953%, obtida com o sistema Indel-plex ID, conjugada com a Probabilidade de Paternidade de 99,957%, obtida como o sistema Minifiler, possibilitou um índice final de 99,99998%. Os resultados evidenciaram que os loci INDELs do sistema Indel-plex ID são altamente informativos, constituindo uma ferramenta importante em estudos de identificação humana e de relações de parentesco

Low-threshold diode-pumped Yb3+, Na+: CaF2 self-Q-switched laser

For the first time to our knowledge, the laser performance of Yb3+, Na+-codoped CaF2 single crystals was demonstrated. Self-Q-switched laser operation at 1050nm was observed for 976 nm diode pumping at room temperature. On 5 W of incident power, the repetition rate and width of the self-Q-switched pulses reached 28 kHz and 1.5 mu s, respectively. A maximal slope efficiency of 20.3% and minimal threshold absorbed pump power of 30 mW were respectively achieved with different output couplers, showing the promising application of Yb3+, Na+-codoped CaF2 crystals as compact and efficient solid-state lasers. (C) 2005 Optical Society of America.

Characterization of diode-pumped laser operation of a novel Yb : GSO crystal

We report what is believed to be the first demonstration of the laser action of Yb3+ -doped Gd2SiO5 (Yb:GSO) crystal pumped by a 940-nm laser diode at room temperature. The threshold of laser generation is only 0.85 kW/cm(2), which is smaller than the theoretic threshold of Yb:YAG (1.54 kW/cm(2)). The laser wavelength is 1090 mn. With a 2.5% output coupler, the maximum output power is 415 mW under a pump power of 5 W. By using the SESAM, the Q-switched mode locking and CW mode-locked operations are demonstrated.

固相法制备Al2（WO4）3粉体及其负热膨胀性能

以Al2O3和WO3为原料，采用固相反应法制备了负热膨胀性能的Al2（WO4）3粉体。用X射线粉末衍射和扫描电镜分别对粉体进行物相、晶体结构分析和形貌观察；通过热重-差热分析了粉体的热性能；采用热膨胀仪测定了热膨胀系数。结果表明：产物为高纯度正交晶系结构的Al2（WO4）3，形状规则，大小均匀，平均尺寸为0．6μm×0．4μm。从室温到熔点范围内，Al2（WO4）3粉体无相变，不发生分解，30～900℃的平均热膨胀系数为-1．56×10^-6K^-1。

Study of thermal behaviors in CO2 laser irradiated glass

To understand mechanisms underlying laser-induced damage of BK7 and fused silica, we calculate the temperature field of the substrates with CO2 laser irradiating at a given laser power and beam radius. We find that the two glasses show different thermal behaviors. A model is developed for estimating the time t to heat the surface of the substrates up to a particular temperature T with cw CO2 laser irradiation. We calculate theoretically the duration t that the samples are irradiated, from the beginning to visual catastrophic damage, with the assumption of damage threshold determined by the critical temperature. The duration t that the samples are irradiated, from the beginning to visual catastrophic damage, is investigated experimentally as well. Here we take the melting point or softening point as the critical temperature, given the thermomechanical coupling properties, which is enough to cause damage for BK7. Damage features are characterized by the sound of visual cracks. Finally, we calculate stresses induced by laser heating. The analysis of stress indicates that the damage of BK7 is due to the stresses induced by laser heating. (c) 2005 Society of Photo-Optical Instrumentation Engineers.

Electric field enhancement in guided-mode resonance filters

Electric fields inside guided-mode resonance filters (GMRFs) may be intensified by resonance effects. The electric field enhancement is investigated in two GMRFs: one is resonant at normal incidence, the other at oblique incidence. It is shown that the two GMRFs exhibit different behaviors in their electric enhancement. Differences between the electric field distributions of the two GMRFs arise because coupling between counter-propagating modes occurs in the first case. It is also shown that the order of the electric field of maximum amplitude can be controlled by modulation of the dielectric constant of the grating. (c) 2006 Optical Society of America.

Study of thermal behaviors in CO2 laser irradiated glass

To understand mechanisms underlying laser-induced damage of BK7 and fused silica, we calculate the temperature field of the substrates with CO2 laser irradiating at a given laser power and beam radius. We find that the two glasses show different thermal behaviors. A model is developed for estimating the time t to heat the surface of the substrates up to a particular temperature T with cw CO2 laser irradiation. We calculate theoretically the duration t that the samples are irradiated, from the beginning to visual catastrophic damage, with the assumption of damage threshold determined by the critical temperature. The duration t that the samples are irradiated, from the beginning to visual catastrophic damage, is investigated experimentally as well. Here we take the melting point or softening point as the critical temperature, given the thermomechanical coupling properties, which is enough to cause damage for BK7. Damage features are characterized by the sound of visual cracks. Finally, we calculate stresses induced by laser heating. The analysis of stress indicates that the damage of BK7 is due to the stresses induced by laser heating. (c) 2005 Society of Photo-Optical Instrumentation Engineers.