Long-Term Follow-Up of Patients after Acute Kidney Injury: Patterns of Renal Functional Recovery

Background and Objectives: Patients who survive acute kidney injury (AKI), especially those with partial renal recovery, present a higher long-term mortality risk. However, there is no consensus on the best time to assess renal function after an episode of acute kidney injury or agreement on the definition of renal recovery. In addition, only limited data regarding predictors of recovery are available. Design, Setting, Participants, & Measurements: From 1984 to 2009, 84 adult survivors of acute kidney injury were followed by the same nephrologist (RCRMA) for a median time of 4.1 years. Patients were seen at least once each year after discharge until end stage renal disease (ESRD) or death. In each consultation serum creatinine was measured and glomerular filtration rate estimated. Renal recovery was defined as a glomerular filtration rate value >= 60 mL/min/1.73 m2. A multiple logistic regression was performed to evaluate factors independently associated with renal recovery. Results: The median length of follow-up was 50 months (30-90 months). All patients had stabilized their glomerular filtration rates by 18 months and 83% of them stabilized earlier: up to 12 months. Renal recovery occurred in 16 patients (19%) at discharge and in 54 (64%) by 18 months. Six patients died and four patients progressed to ESRD during the follow up period. Age (OR 1.09, p < 0.0001) and serum creatinine at hospital discharge (OR 2.48, p = 0.007) were independent factors associated with non renal recovery. The acute kidney injury severity, evaluated by peak serum creatinine and need for dialysis, was not associated with non renal recovery. Conclusions: Renal recovery must be evaluated no earlier than one year after an acute kidney injury episode. Nephrology referral should be considered mainly for older patients and those with elevated serum creatinine at hospital discharge.

Matrix Metalloproteinase (MMP)-2 Genetic Variants Modify the Circulating MMP-2 Levels in End-Stage Kidney Disease

Background: Matrix metalloproteinases (MMPs) play important roles in the pathophysiology of renal diseases, and imbalanced MMP-2 and its endogenous inhibitor (the tissue inhibitor of metalloproteinases-2; TIMP-2) are implicated in the vascular alterations of end-stage kidney disease (ESKD) patients. We have examined whether MMP-2 gene polymorphisms and haplotypes modify MMP-2 and TIMP-2 levels in ESKD patients as well as the effects of hemodialysis on the concentrations of these biomarkers. Methods: We determined MMP-2 and TIMP-2 plasma levels by gelatin zymography and ELISA, respectively, in 98 ESKD patients and in 38 healthy controls. Genotypes for two relevant MMP-2 polymorphisms (C-T-1306 and C-T-735 in the promoter region) were determined by TaqMan (R) allele discrimination assay and real-time polymerase chain reaction. The software program PHASE 2.1 was used to estimate the haplotype frequencies. Results: We found increased plasma MMP-2 and TIMP-2 levels in ESKD patients compared to controls (p<0.05), and hemodialysis decreased MMP-2 (but not TIMP-2) levels (p<0.05). The T allele for the C-T-735 polymorphism and the C-T haplotype were associated with higher MMP-2 (but not TIMP-2) levels (p<0.05), whereas the C-T-1306 had no effects. Hemodialysis decreased MMP-2 (but not TIMP-2) levels independently of MMP-2 genotypes or haplotypes (p<0.05). Conclusions: MMP-2 genotypes or haplotypes modify MMP-2 levels in ESKD patients, and may help to identify patients with increased MMP-2 activity in plasma. Hemodialysis reduces MMP-2 levels independently of MMP-2 genetic variants. Copyright (C) 2012 S. Karger AG, Basel

Influence of caffeine on the survival of leaf-cutting ants Atta sexdens rubropilosa and in vitro growth of their mutualistic fungus

BACKGROUND: Leaf-cutting ants collect plant fresh material for the cultivation of their mutualistic fungus. Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae) cause great economic losses through their foraging activity, mainly in agriculture. The main control method is the application of granulated toxic baits incorporated with an active ingredient (AI). The present goal is to evaluate the effect of caffeine on in vitro growth of the mutualistic fungus and on the survival of the leaf-cutting ants, aiming to verify the potential toxicity of this secondary metabolite over these organisms. RESULTS: Three distinct patterns of fungal growth correlated with caffeine concentration were observed: (1) no effect (0.01% caffeine); (2) intermediate growth reduction (0.05% caffeine); (3) drastic growth reduction (0.10 and 0.50% caffeine). The highest caffeine concentration causes fungus death in the first week. As for insect survival, caffeine does not seem to exert any effect. The treatments with diet containing caffeine showed similar values of M50, irrespective of caffeine concentration. CONCLUSION: As caffeine was shown to reduce growth of the mutualistic fungus of Atta sexdens rubropilosa, but with no conclusive effect on insect survival, a hypothetical explanation for the selection of different Coffea species by this leaf-cutting ant species might be associated with caffeine toxicity to the fungus. Copyright (C) 2011 Society of Chemical Industry

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Etablierung transgener BY-2-Zelllinien zur In-vivo-Lokalisierung pflanzlicher Cytoskelettproteine

Bei den Pflanzen sind viele Fragen bezüglich der Organisation und Regulation des bei der Zellteilung und differenzierung wichtigen Auf-, Ab- und Umbaus des Mikrotubuli-Netzwerkes noch immer offen, insbesondere was die Rolle des γ-Tubulins betrifft. Ziel der vorliegenden Arbeit war die Etablierung von BY-2 Modell-Zelllinien (Nicotiana), die verschiedene mit fluoreszierenden Proteinen (FP) markierte Elemente des Cytoskeletts exprimieren, um eine fluoreszenzmikroskopische Detektion in vivo zu ermöglichen.rnAls Grundlage für alle weiteren Versuche wurde eine zuverlässige Methode zur A. tumefaciens vermittelten stabilen Transfektion von BY-2 Zellen erarbeitet. Für die Expression von FP-markierten Cytoskelettproteinen, wurden entsprechende Fusionskonstrukte kloniert und via A. tumefaciens in BY-2 Zellen transferiert. So gelang zunächst die Herstellung transgener Zelllinien, die GFP-markiertes α- bzw. γ-Tubulin exprimierten. Diese sollten später als Basis für die Untersuchung des dynamischen Mikrotubuli-Netzwerkes bzw. dessen Regulation dienen. In beiden Zelllinien standen die Konstrukte zunächst unter Kontrolle eines doppelten 35S-Promotors, was zu einer starken, konstitutiven Expression der Transgene führte. Fluoreszenzmikroskopisch konnten Strukturen, an deren Aufbau Mikrotubuli beteiligt sind, detektiert werden. Aufgrund einer starken Hintergrundfluoreszenz, vermutlich bedingt durch die konstitutive Überexpression, war die Darstellung feinerer Bereiche, wie sie im Cytoskelett häufig auftreten, jedoch äußerst schwierig. Deshalb wurde eine schwächere bzw. adäquate Expressionsrate angestrebt. rnPhysiologische Expressionsraten sollten vor allem durch den endogenen γ-Tubulin-Promotor ermöglicht werden. Da die entsprechende Sequenz noch unbekannt war, wurde sie zunächst bestimmt und in ein passendes Konstrukt integriert. Fluoreszenzmikroskopische Untersuchungen der resultierenden Zelllinie ließen auf eine stark reduzierte Expressionsrate schließen. Tatsächlich war die Detektion von Cytoskelettstrukturen, wenn überhaupt, erst bei deutlich längeren Belichtungszeiten möglich. Bedingt durch die langen Belichtungszeiten wurde die Dokumentation durch eine latente pflanzentypische Autofluoreszenz der Zellen erschwert. Auch wenn hier keine detailreicheren Aufnahmen der Cytoskelettstrukturen möglich waren, ist die Zellkultur für weiterführende Untersuchungen, z.B. in Studien bezüglich des zeitlichen Expressionsmusters des γ-Tubulins, potentiell geeignet. Der Einsatz eines sensibleren Mikroskopsystems ist allerdings erforderlich. rnUm klären zu können, inwieweit γ-Tubulin mit den Mikrotubuli co-lokalisiert, wurden Zelllinien benötigt, bei denen die entsprechenden Elemente unterschiedlich markiert waren. Zu diesem Zweck wurde der Einsatz von RFP-markiertem Tubulin getestet. Eine deutliche Überexpression von RFP alleine war möglich. Trotz mehrfacher Wiederholung der Versuche war aber keine Expression von RFP-markiertem α-Tubulin in BY-2 Zellen zur Visualisierung der Mikrotubuli detektierbar. Die DNA-Sequenzen waren im Genom nachweisbar, eine Transkription jedoch nicht. Möglicherweise spielten hier gene silencing Effekte eine Rolle. Das verwendete RFP (TagRFP) und GFP stammten aus unterschiedlichen Organismen, aus einer Seeanemone bzw. einer Qualle. Eine Lösung könnte der Austausch des TagRFP durch ein Quallen-Derivat, das in einer von grün unterscheidbaren Farbe fluoresziert, bringen. Da bereits BY-2 Zelllinien vorliegen, die GFP-markiertes α- bzw. γ-Tubulin exprimieren, sollte es, nach Klonieren eines entsprechenden Konstruktes, zeitnah möglich sein, eine doppelt transfizierte Zelllinie herzustellen.

Mining tissue microarray data to uncover combinations of biomarker expression patterns that improve intermediate staging and grading of clear cell renal cell cancer

PURPOSE: Tumor stage and nuclear grade are the most important prognostic parameters of clear cell renal cell carcinoma (ccRCC). The progression risk of ccRCC remains difficult to predict particularly for tumors with organ-confined stage and intermediate differentiation grade. Elucidating molecular pathways deregulated in ccRCC may point to novel prognostic parameters that facilitate planning of therapeutic approaches. EXPERIMENTAL DESIGN: Using tissue microarrays, expression patterns of 15 different proteins were evaluated in over 800 ccRCC patients to analyze pathways reported to be physiologically controlled by the tumor suppressors von Hippel-Lindau protein and phosphatase and tensin homologue (PTEN). Tumor staging and grading were improved by performing variable selection using Cox regression and a recursive bootstrap elimination scheme. RESULTS: Patients with pT2 and pT3 tumors that were p27 and CAIX positive had a better outcome than those with all remaining marker combinations. A prolonged survival among patients with intermediate grade (grade 2) correlated with both nuclear p27 and cytoplasmic PTEN expression, as well as with inactive, nonphosphorylated ribosomal protein S6. By applying graphical log-linear modeling for over 700 ccRCC for which the molecular parameters were available, only a weak conditional dependence existed between the expression of p27, PTEN, CAIX, and p-S6, suggesting that the dysregulation of several independent pathways are crucial for tumor progression. CONCLUSIONS: The use of recursive bootstrap elimination, as well as graphical log-linear modeling for comprehensive tissue microarray (TMA) data analysis allows the unraveling of complex molecular contexts and may improve predictive evaluations for patients with advanced renal cancer.

Patterns of frontobasal and frontosinal fractures in children and teenagers relative to developmental stage of the facial skeleton

To clarify the patterns of frontobasal and frontosinal fractures in children and teenagers and to analyze whether the patterns relate to developmental stage of the facial skeleton.

Life stage differences in mammary gland gene expression profile in non-human primates

Breast cancer (BC) is the most common malignancy of women in the developed world. To better understand its pathogenesis, knowledge of normal breast development is crucial, as BC is the result of disregulation of physiologic processes. The aim of this study was to investigate the impact of reproductive life stages on the transcriptional profile of the mammary gland in a primate model. Comparative transcriptomic analyses were carried out using breast tissues from 28 female cynomolgus macaques (Macaca fascicularis) at the following life stages: prepubertal (n = 5), adolescent (n = 4), adult luteal (n = 5), pregnant (n = 6), lactating (n = 3), and postmenopausal (n = 5). Mammary gland RNA was hybridized to Affymetrix GeneChip(®) Rhesus Macaque Genome Arrays. Differential gene expression was analyzed using ANOVA and cluster analysis. Hierarchical cluster analysis revealed distinct separation of life stage groups. More than 2,225 differentially expressed mRNAs were identified. Gene families or pathways that changed across life stages included those related to estrogen and androgen (ESR1, PGR, TFF1, GREB1, AR, 17HSDB2, 17HSDB7, STS, HSD11B1, AKR1C4), prolactin (PRLR, ELF5, STAT5, CSN1S1), insulin-like growth factor signaling (IGF1, IGFBP1, IGFBP5), extracellular matrix (POSTN, TGFB1, COL5A2, COL12A1, FOXC1, LAMC1, PDGFRA, TGFB2), and differentiation (CD24, CD29, CD44, CD61, ALDH1, BRCA1, FOXA1, POSTN, DICER1, LIG4, KLF4, NOTCH2, RIF1, BMPR1A, TGFB2). Pregnancy and lactation displayed distinct patterns of gene expression. ESR1 and IGF1 were significantly higher in the adolescent compared to the adult animals, whereas differentiation pathways were overrepresented in adult animals and pregnancy-associated life stages. Few individual genes were distinctly different in postmenopausal animals. Our data demonstrate characteristic patterns of gene expression during breast development. Several of the pathways activated during pubertal development have been implicated in cancer development and metastasis, supporting the idea that other developmental markers may have application as biomarkers for BC.

Distinct patterns of inflammation in the airway lumen and bronchial mucosa of children with cystic fibrosis

Studies in cystic fibrosis (CF) generally focus on inflammation present in the airway lumen. Little is known about inflammation occurring in the airway wall, the site ultimately destroyed in end-stage disease.

Outcome and patterns of failure after postoperative intensity modulated radiotherapy for locally advanced or high-risk oral cavity squamous cell carcinoma

Background To determine the outcome and patterns of failure in oral cavity cancer (OCC) patients after postoperative intensity modulated radiotherapy (IMRT) with concomitant systemic therapy. Methods All patients with locally advanced (AJCC stage III/IV) or high-risk OCC (AJCC stage II) who underwent postoperative IMRT at our institution between December 2006 and July 2010 were retrospectively analyzed. The primary endpoint was locoregional recurrence-free survival (LRRFS). Secondary endpoints included distant metastasis-free survival (DMFS), overall survival (OS), acute and late toxicities. Results Overall 53 patients were analyzed. Twenty-three patients (43%) underwent concomitant chemotherapy with cisplatin, two patients with carboplatin (4%) and four patients were treated with the monoclonal antibody cetuximab (8%). At a median follow-up of 2.3 (range, 1.1–4.6) years the 3-year LRRFS, DMFS and OS estimates were 79%, 90%, and 73% respectively. Twelve patients experienced a locoregional recurrence. Eight patients, 5 of which had both a flap reconstruction and extracapsular extension (ECE), showed an unusual multifocal pattern of recurrence. Ten locoregional recurrences occurred marginally or outside of the high-risk target volumes. Acute toxicity grades of 2 (27%) and 3 (66%) and late toxicity grades of 2 (34%) and 3 (11%) were observed. Conclusion LRRFS after postoperative IMRT is satisfying and toxicity is acceptable. The majority of locoregional recurrences occurred marginally or outside of the high-risk target volumes. Improvement of high-risk target volume definition especially in patients with flap reconstruction and ECE might transfer into better locoregional control.

Whole-body MRI of multiple myeloma: comparison of different MRI sequences in assessment of different growth patterns

PURPOSE: To determine sensitivity, specificity and inter-observer variability of different whole-body MRI (WB-MRI) sequences in patients with multiple myeloma (MM). METHODS AND MATERIALS: WB-MRI using a 1.5T MRI scanner was performed in 23 consecutive patients (13 males, 10 females; mean age 63+/-12 years) with histologically proven MM. All patients were clinically classified according to infiltration (low-grade, n=7; intermediate-grade, n=7; high-grade, n=9) and to the staging system of Durie and Salmon PLUS (stage I, n=12; stage II, n=4; stage III, n=7). The control group consisted of 36 individuals without malignancy (25 males, 11 females; mean age 57+/-13 years). Two observers independently evaluated the following WB-MRI sequences: T1w-TSE (T1), T2w-TIRM (T2), and the combination of both sequences, including a contrast-enhanced T1w-TSE with fat-saturation (T1+/-CE/T2). They had to determine growth patterns (focal and/or diffuse) and the MRI sequence that provided the highest confidence level in depicting the MM lesions. Results were calculated on a per-patient basis. RESULTS: Visual detection of MM was as follows: T1, 65% (sensitivity)/85% (specificity); T2, 76%/81%; T1+/-CE/T2, 67%/88%. Inter-observer variability was as follows: T1, 0.3; T2, 0.55; T1+/-CE/T2, 0.55. Sensitivity improved depending on infiltration grade (T1: 1=60%; 2=36%; 3=83%; T2: 1=70%; 2=71%; 3=89%; T1+/-CE/T2: 1=50%; 2=50%; 3=89%) and clinical stage (T1: 1=58%; 2=63%; 3=79%; T2: 1=58%; 2=88%; 3=100%; T1+/-CE/T2: 1=50%; 2=63%; 3=100%). T2w-TIRM sequences achieved the best reliability in depicting the MM lesions (65% in the mean of both readers). CONCLUSIONS: T2w-TIRM sequences achieved the highest level of sensitivity and best reliability, and thus might be valuable for initial assessment of MM. For an exact staging and grading the examination protocol should encompass unenhanced and enhanced T1w-MRI sequences, in addition to T2w-TIRM.

Distinct subcellular expression patterns of neutral endopeptidase (CD10) in prostate cancer predict diverging clinical courses in surgically treated patients

PURPOSE: Neutral endopeptidase (CD10), an ectopeptidase bound to the cell surface, is thought to be a potential prognostic marker for prostate cancer. EXPERIMENTAL DESIGN: Prostate cancer patients (N = 3,261) treated by radical prostatectomy at a single institution were evaluated by using tissue microarray. Follow-up data were available for 2,385 patients. The cellular domain (membranous, membranous-cytoplasmatic, and cytoplasmatic only) of CD10 expression was analyzed immunohistochemically and correlated with various clinical and histopathologic features of the tumors. RESULTS: CD10 expression was detected in 62.2% of cancer samples and occurred preferentially in higher Gleason pattern (P < 0.0001). CD10 expression positively correlated with adverse tumor features such as elevated preoperative prostate-specific antigen (PSA), higher Gleason score, and advanced stage (P < 0.0001 each). Survival analyses showed that PSA recurrence was significantly associated with the staining pattern of CD10 expression. Outcome significantly declined from negative over membranous, membranous-cytoplasmatic, to exclusively cytoplasmatic CD10 expression (P < 0.0001). In multivariate analysis, CD10 expression was an independent predictor for PSA failure (P = 0.0343). CONCLUSIONS: CD10 expression is an unfavorable independent risk factor in prostate cancer. The subcellular location of CD10 protein is associated with specific clinical courses, suggesting an effect on different important biological properties of prostate cancer cells. The frequent expression of CD10 in prostate cancer and the strong association of CD10 with unfavorable tumor features may qualify this biomarker for targeted therapies.

TGF-ß1 enhances the BMP-2-induced chondrogenesis of bovine synovial explants and arrests downstream differentiation at an early stage of hypertrophy

BACKGROUND Synovial explants furnish an in-situ population of mesenchymal stem cells for the repair of articular cartilage. Although bone morphogenetic protein 2 (BMP-2) induces the chondrogenesis of bovine synovial explants, the cartilage formed is neither homogeneously distributed nor of an exclusively hyaline type. Furthermore, the downstream differentiation of chondrocytes proceeds to the stage of terminal hypertrophy, which is inextricably coupled with undesired matrix mineralization. With a view to optimizing BMP-2-induced chondrogenesis, the modulating influences of fibroblast growth factor 2 (FGF-2) and transforming growth factor beta 1 (TGF-ß1) were investigated. METHODOLOGY/PRINCIPAL FINDINGS Explants of bovine calf metacarpal synovium were exposed to BMP-2 (200 ng/ml) for 4 (or 6) weeks. FGF-2 (10 ng/ml) or TGF-ß1 (10 ng/ml) was introduced at the onset of incubation and was present either during the first week of culturing alone or throughout its entire course. FGF-2 enhanced the BMP-2-induced increase in metachromatic staining for glycosaminoglycans (GAGs) only when it was present during the first week of culturing alone. TGF-ß1 enhanced not only the BMP-2-induced increase in metachromasia (to a greater degree than FGF-2), but also the biochemically-assayed accumulation of GAGs, when it was present throughout the entire culturing period; in addition, it arrested the downstream differentiation of cells at an early stage of hypertrophy. These findings were corroborated by an analysis of the gene- and protein-expression levels of key cartilaginous markers and by an estimation of individual cell volume. CONCLUSIONS/SIGNIFICANCE TGF-ß1 enhances the BMP-2-induced chondrogenesis of bovine synovial explants, improves the hyaline-like properties of the neocartilage, and arrests the downstream differentiation of cells at an early stage of hypertrophy. With the prospect of engineering a mature, truly articular type of cartilage in the context of clinical repair, our findings will be of importance in fine-tuning the stimulation protocol for the optimal chondrogenic differentiation of synovial explants.

Definitive intensity modulated radiotherapy in locally advanced hypopharygeal and laryngeal squamous cell carcinoma: mature treatment results and patterns of locoregional failure.

PurposeTo assess clinical outcomes and patterns of loco-regional failure (LRF) in relation to clinical target volumes (CTV) in patients with locally advanced hypopharyngeal and laryngeal squamous cell carcinoma (HL-SCC) treated with definitive intensity modulated radiotherapy (IMRT) and concurrent systemic therapy.MethodsData from HL-SCC patients treated from 2007 to 2010 were retrospectively evaluated. Primary endpoint was loco-regional control (LRC). Secondary endpoints included local (LC) and regional (RC) controls, distant metastasis free survival (DMFS), laryngectomy free survival (LFS), overall survival (OS), and acute and late toxicities. Time-to-event endpoints were estimated using Kaplan-Meier method, and univariate and multivariate analyses were performed using Cox proportional hazards models. Recurrent gross tumor volume (RTV) on post-treatment diagnostic imaging was analyzed in relation to corresponding CTV (in-volume, > 95% of RTV inside CTV; marginal, 20¿95% inside CTV; out-volume, < 20% inside CTV).ResultsFifty patients (stage III: 14, IVa: 33, IVb: 3) completed treatment and were included in the analysis (median follow-up of 4.2 years). Three-year LRC, DMFS and overall survival (OS) were 77%, 96% and 63%, respectively. Grade 2 and 3 acute toxicity were 38% and 62%, respectively; grade 2 and 3 late toxicity were 23% and 15%, respectively. We identified 10 patients with LRF (8 local, 1 regional, 1 local¿+¿regional). Six out of 10 RTVs were fully included in both elective and high-dose CTVs, and 4 RTVs were marginal to the high-dose CTVs.ConclusionThe treatment of locally advanced HL-SCC with definitive IMRT and concurrent systemic therapy provides good LRC rates with acceptable toxicity profile. Nevertheless, the analysis of LRFs in relation to CTVs showed in-volume relapses to be the major mode of recurrence indicating that novel strategies to overcome radioresistance are required.