Radioterapia em câncer de mama: importância da determinação da curva de isodose

The study analyzed contours of the thoracic region of patients undergoing radiotherapy of breast tumors in Hospital Manuel de Abreu of Bauru (institution 1) and the Hospital da Faculdade de Medicina of Botucatu (Institution 2). Were prepared isodose curves corresponding to the contours of the patient, which were presented for radiotherapists doctors both hospital services that enabled the choice of the curve isodose that provides the best distribution of radiation dose in the irradiated volume. Some boundaries were digitized in one institution and sent for preparation of isodose lines in the institution 2, both curves plotted in each of the institutions and for the same contour, were compared, showing that the methodology of Curves of distance is feasible and reliable, while optimizing the routine procedures regarding the handling of isodose plans provided by different radiation equipment. It compares the calculation of the exposure time determined using the isodose curve selected by calculating the value obtained considering the PDP at the point of the middle line of separation between the internal and external fields, the difference between the two methods for determining exposure time was around 2.4%. A study on the angle of the radiation beam at the input field (region breast-air) was conducted showing that, once known a tangent angle of the input beam, one can estimate the angle of the wedge filter used in some procedures for uniformity of dose within the irradiated volume compensation and the lack of tissue in the treatment volume. A comparative study between the isodose curves produced manually with the curves obtained in a two-dimensional computer system, the computer system showed that provides further information regarding the dose gradient within the irradiated volume, in addition to reducing the time spent in preparing the curves isodose

Um estudo de novos paradigmas na realização de projetos de instalação elétrica residencial (automação)

Through awareness of new trends of consumption of the population with regard to housing, comfort, entertainment, security and sustainability, it was crafted a work that set out to study and develop the concept of home automation and how it will revolutionize the electrical installation projects and energy savings. A pre-wiring project, taking into account, basically, the installed load, is presented as a basis for comparison. The protocols for communication between intelligent devices in an automation environment, used in the work, are the X-10, LonWorks and UPnP. The home network is studied and divided into subsystems, for a better understanding, which are the lighting, audio, video and multimedia system, security, air conditioning and central vacuum system, and the idea of integrated design and system integrator is introduced, showing the change necessity in the design philosophy of electrical installations. The main means of energy savings in an automated home, such as dimerization, master off and smart meters are presented and, finally, it was concluded that there is a need to structure electrical installation projects more comprehensive with regard to home automation, in order to become more efficient and useful to users

An approach to mitigate denial of service attacks in ieee 802.11 networks

Wireless networks are widely deployed and have many uses, for example in critical embedded systems. The applications of this kind of network meets the common needs of most embedded systems and addressing the particularities of each scenario, such as limitations of computing resources and energy supply. Problems such as denial of service attacks are common place and cause great inconvenience. Thus, this study presents simulations of denial of service attacks on 802.11 wireless networks using the network simulator OMNeT++. Furthermore, we present an approach to mitigate such attack, obtaining significant results for improving wireless networks.

Segurança em redes sem fio: estudo sobre o desenvolvimento de conjuntos de dados para comparação de IDS

Pós-graduação em Engenharia Elétrica - FEIS

Plataforma computacional fuzzy para avaliação nos estágios do tomateiro dos efeitos da irrigação e salinidade da água

Pós-graduação em Agronegócio e Desenvolvimento - Tupã

APR e FMEA em trocador de calor de bomba

The modernization of the world made the speed, accuracy and reliability of all existing processes become increasingly necessary. For this evolution to occur every day, the evolution of the equipment was strategic, but not as much as needed. It is necessary for such equipment to ensure its function and, in case of failure, an early diagnosis to prevent loss. Therefore the evolution of maintainability and reliability in equipment is also paramount. Thus, the growth of forms of maintenance was driven by this scenario, forming maintenance philosophies. Among many, there is the RCM, which have its focus on the identification, parameters development and performance preview. One of those methodologies from this idea is the FMEA, process that has been studied and implemented this work, aiming the anticipation of failure modes and guidance for the use of a heat exchanger and a pump. This implementation has the aid of another process of RCM, the PHA, which was also shown and implemented, these results being used to start the FMEA process. The results show the activities with the highest chance of failure, presenting also the measures to be taken to avoid or minimize them. It is shown, in this paper, concern with the valves because they maintain control and system security, and its flaws related to accidents with possible danger to people and the whole system, emphasizing the priority of action

APR e FMEA em trocador de calor de bomba

The modernization of the world made the speed, accuracy and reliability of all existing processes become increasingly necessary. For this evolution to occur every day, the evolution of the equipment was strategic, but not as much as needed. It is necessary for such equipment to ensure its function and, in case of failure, an early diagnosis to prevent loss. Therefore the evolution of maintainability and reliability in equipment is also paramount. Thus, the growth of forms of maintenance was driven by this scenario, forming maintenance philosophies. Among many, there is the RCM, which have its focus on the identification, parameters development and performance preview. One of those methodologies from this idea is the FMEA, process that has been studied and implemented this work, aiming the anticipation of failure modes and guidance for the use of a heat exchanger and a pump. This implementation has the aid of another process of RCM, the PHA, which was also shown and implemented, these results being used to start the FMEA process. The results show the activities with the highest chance of failure, presenting also the measures to be taken to avoid or minimize them. It is shown, in this paper, concern with the valves because they maintain control and system security, and its flaws related to accidents with possible danger to people and the whole system, emphasizing the priority of action

Facial symmetry evaluation after experimentally displaced condylar process fracture in methotrexate treated rats

PURPOSE: To investigate the facial symmetry of high and low dose methotrexate (MTX) treated rats submitted to experimentally displaced mandibular condyle fracture through the recording of cephalometric measurements. METHODS: One hundred male Wistar rats underwent surgery using an experimental model of right condylar fracture. Animals were divided into four groups: A - saline solution (1mL/week); B - dexamethasone (DEX) (0,15mg/Kg); C - MTX low dose (3 mg/Kg/week); D - MTX high dose (30 mg/Kg). Animals were sacrificed at 1, 7, 15, 30 and 90 days postoperatively (n=5). Body weight was recorded. Specimens were submitted to axial radiographic incidence, and cephalometric mensurations were made using a computer system. Linear measurements of skull and mandible, as well as angular measurements of mandibular deviation were taken. Data were subjected to statistical analyses among the groups, periods of sacrifice and between the sides in each group (alpha=0.05). RESULTS: Animals regained body weight over time, except in group D. There was reduction in the mandibular length and also changes in the maxilla as well as progressive deviation in the mandible in relation to the skull basis in group D. CONCLUSION: Treatment with high dose methotrexate had deleterious effect on facial symmetry of rats submitted to experimentally displaced condylar process fracture.

Plano de inovação para o Vocabulário Controlado do SIBIUSP: relato de experiência

Controlled vocabularies are tools of representation of information necessary to standardize the content description and classification of information, making information systems consistent and also minimizing the dispersion of information. One of the most critical points of controlled vocabularies is the need to constantly update, in terminology and the computer system. The purpose of this paper is to share the experience of the Sistema Integrado de Bibliotecas da Universidade de São Paulo - (SIBiUSP) in planning and developing an innovation plan for your Controlled Vocabulary, reporting their goals and actions. Such actions are in different stages of referral, so there are provisional results. The article also brings the description of his movements and the difficulties encountered as collaboration and knowledge for professionals that working and researching with the theme controlled vocabularies

The 3C cooperation model applied to the classical requirement analysis

Aspects related to the users' cooperative work are not considered in the traditional approach of software engineering, since the user is viewed independently of his/her workplace environment or group, with the individual model generalized to the study of collective behavior of all users. This work proposes a process for software requirements to address issues involving cooperative work in information systems that provide distributed coordination in the users' actions and the communication among them occurs indirectly through the data entered while using the software. To achieve this goal, this research uses ergonomics, the 3C cooperation model, awareness and software engineering concepts. Action-research is used as a research methodology applied in three cycles during the development of a corporate workflow system in a technological research company. This article discusses the third cycle, which corresponds to the process that deals with the refinement of the cooperative work requirements with the software in actual use in the workplace, where the inclusion of a computer system changes the users' workplace, from the face to face interaction to the interaction mediated by the software. The results showed that the highest degree of users' awareness about their activities and other system users contribute to a decrease in their errors and in the inappropriate use of the system.

Desarrollo de interfaces de usuario para una herramienta de telecontrol y automatización industrial

[ES] Este proyecto de fin de carrera aborda la actualización y refactorización de la aplicación Hecaton. Esta aplicación permite la monitorización y actuación en instalaciones industriales de manera remota a través de un interfaz web. Para ello hace uso de sensores y actuadores que, conectados a través de un equipo de adquisición de datos a un sistema informático servidor, permiten obtener, manipular y almacenar los datos y eventos recibidos. Hecaton ha sido desarrollado enteramente utilizando software libre. Además, el sistema permite ser personalizado, lo que posibilita su uso en todo tipo de escenarios, siendo el usuario quién define las reglas de funcionamiento. Este trabajo se trata del cuarto ciclo de desarrollo, pues la aplicación ha sido crea y ampliada en otros tres proyectos. En este último desarrollo se han actualizado las tecnologías y herramientas que forman parte de la aplicación. Se ha puesto especial énfasis en el rediseño de la interfaz web, adoptando el uso de las últimas tecnologías web que permiten un funcionamiento dinámico de la misma. Por otro lado se han corregido algunos errores de diseño e introducido el uso de nuevas herramientas para la gestión del proyecto software. Se trata por lo tanto de un ejercicio de refactorización software donde se ha puesto especial atención en conseguir un proyecto actualizado y que utilice metodologías de desarrollo actuales y que posibilite que sea actualizado en un futuro.

Analysis of charge-transport properties in GST materials for next generation phase-change memory devices

The quest for universal memory is driving the rapid development of memories with superior all-round capabilities in non-volatility, high speed, high endurance and low power. The memory subsystem accounts for a significant cost and power budget of a computer system. Current DRAM-based main memory systems are starting to hit the power and cost limit. To resolve this issue the industry is improving existing technologies such as Flash and exploring new ones. Among those new technologies is the Phase Change Memory (PCM), which overcomes some of the shortcomings of the Flash such as durability and scalability. This alternative non-volatile memory technology, which uses resistance contrast in phase-change materials, offers more density relative to DRAM, and can help to increase main memory capacity of future systems while remaining within the cost and power constraints. Chalcogenide materials can suitably be exploited for manufacturing phase-change memory devices. Charge transport in amorphous chalcogenide-GST used for memory devices is modeled using two contributions: hopping of trapped electrons and motion of band electrons in extended states. Crystalline GST exhibits an almost Ohmic I(V) curve. In contrast amorphous GST shows a high resistance at low biases while, above a threshold voltage, a transition takes place from a highly resistive to a conductive state, characterized by a negative differential-resistance behavior. A clear and complete understanding of the threshold behavior of the amorphous phase is fundamental for exploiting such materials in the fabrication of innovative nonvolatile memories. The type of feedback that produces the snapback phenomenon is described as a filamentation in energy that is controlled by electron–electron interactions between trapped electrons and band electrons. The model thus derived is implemented within a state-of-the-art simulator. An analytical version of the model is also derived and is useful for discussing the snapback behavior and the scaling properties of the device.

Lokalisation und Quantifizierung von 4-Hydroxynonenal in der Kochlea des Meerschweinchens nach Applikation von Gentamicin

Einleitung und Literaturdiskussion: Gentamicin ist ein aus Bakterien gewonnenes Aminoglykosid-Antibiotikum, das seit vielen Jahren im klinischen Alltag zur Therapie von bakteriellen Infektionen und zur Behandlung des Morbus Ménière eingesetzt wird. Ein bedeutender, jedoch noch nicht vollständig verstandener, Pathomechanismus ist dabei die Entstehung von 4-HNE durch Lipid Peroxidation und die konsekutive Schädigung durch das gebildete Aldehyd. Ziel dieser Arbeit war es, die Beeinflussung der Expression von 4-HNE in sieben verschiedenen Regionen der Kochlea (SV, SL, CO, NF, LF, IDZ und SGZ) durch Gentamicin zu beschreiben und quantitativ zu ermitteln.rnMaterial und Methoden: Die Meerschweinchen wurden in vier Gruppen unterteilt: eine unbehandelte Kontrollgruppe und je eine Gruppe 1, 2 und 7 Tage nach Gentamicin-Applikation. Nach Ablauf der Inkubationszeit wurden die Kochleae den Tieren entnommen, das Gewebe fixiert, geschnitten und auf Objektträgern aufgebracht. Die Schnitte wurden mit 4-HNE-Antikörpern behandelt und die Immunreaktion mikroskopisch lokalisiert und zelluläre quantitative Unterschiede am Computer berechnet.rnErgebnisse: Die Auswertung der Daten ergab signifikante Anstiege der Immunreaktion auf 4-HNE von der Kontrollgruppe zu allen drei Behandlungsgruppen in vier der sieben untersuchten Regionen (Stria vascularis, Spirales Ligament, Cortisches Organ und Nervenfasern). In zwei Bereichen (Fibrozyten im Limbus und Interdentalzellen) kam es zwischen Kontrollgruppe und nur einer Behandlungsgruppe D (7d) zu einer signifikanten Erhöhung. Lediglich die Spiralganglionzellen erbrachten keine signifikanten Differenzen. Der Vergleich der Einzelwindungen erbrachte für die Stria vascularis, das Spirale Ligament, das Cortische Organ und die Nervenfasern signifikante Anstiege innerhalb der drei Windungen von der Kontrollgruppe zu den drei Behandlungsgruppen. Bei der Stria vascularis zeigte sich als einzige Region eine signifikant erhöhte Immunfärbung in allen drei Einzelwindungen von der Kontrollgruppe zu allen Behandlungsgruppen. Beim Vergleich der Gesamtwindungen ließ sich ausschließlich für die Region der Stria vascularis von der ersten zur dritten Windung ein Anstieg der Braunfärbung feststellen. Zudem konnten Korrelationen der Färbeintensitäten einerseits zwischen den beiden Regionen der Lateralen Wand und andererseits zwischen zwei Zelltypen im Limbus aufgezeigt werden.rnDiskussion: Die durch Gentamicin-gesteigerte 4-HNE-Expression kann durch genomische und nicht-genomische Prozesse hervorgerufen werden.

On a Microcomputer Implementation of an Intrusion-detection Algorithm

The main objective of this paper is to discuss various aspects of implementing a specific intrusion-detection scheme on a micro-computer system using fixed-point arithmetic. The proposed scheme is suitable for detecting intruder stimuli which are in the form of transient signals. It consists of two stages: an adaptive digital predictor and an adaptive threshold detection algorithm. Experimental results involving data acquired via field experiments are also included.