Morphological, biochemical and growth characteristics of Serratia strains isolated from sardine (Sardinella longiceps)

Two aerobic, gram-negative asporogenous, red-pigmented, rod-shaped bacterial strains were isolated from oil sardine (Sardinella longiceps). Their morphological, biochemical and growth characteristics are reported. The pigment was identified to be a prodigiosene. The strains were found to resemble Serratia plymuthica. Effect of temperature and certain carbohydrates on pigmentation was also studied. Iron was found to inhibit pigmentation, and mannitol or sorbitol removed such inhibition.

Correlation of cell numbers with catalase activities of pure strains of bacteria

An attempt was made to correlate the catalase production with the actual number of aerobic bacterial cells generating the enzyme: bacteria were obtained from the surface of marine fish. A linear correlation was found between the log of catalase activity and log of bacterial count in single culture.

Antibiotic sensitivity of Staphylococcus aureus strains isolated from fishery products

During the course of an investigation on the incidence of Staphylococcus aureus contamination in frozen crab meat, frozen prawns and dried fishes from Cochin, 116 strains of S. aureus were isolated. The sensitivity of the isolated strains towards nine antibiotics showed that all the S. aureus strains were sensitive to kanamycin and streptomycin (100%). Sensitivity to other antibiotics like chloramphenicol, polymyxin-B, erythromycin, tetracycline, neomycin, penicillin and ampicillin were shown by 98.28, 93.10, 87.93, 68.10, 67.24, 56.90 and 55.17 percent of the isolates respectively.

Tensile strength properties of polyethylene netting twines under exposure to out-door and artificial UV radiation

Photodegradation of three types of polyethylene twines namely, polyethylene fibrillated tape twine, polyethylene flat tape twine and polyethylene monofilament twines were studied by exposing them to sunlight and artificial UV radiation. The percentage residual strength varied in the samples, the monofilament with the highest residual strength followed by fibrillated tape twine and flat tape twine. A plot of the difference between the breaking strengths of the fibrillated tape twine and the mono filament twines against any given period of exposure exhibited a linear relationship

Antibiotic sensitivity of Vibrio parahaemolyticus strains

The strains of Vibrio parahaemolyticus isolated from water, sediment, plankton, fish and prawn of Cochin backwater were tested for sensitivity to ten antibiotics namely, ampicillin, chloramphenicol, gentamycin, kanamycin, neomycin, oxytetracycline, penicillin, polymyxin-B, streptomycin and sulphadiazine. Of the 120 isolates tested, 96.7 and 93.3% were sensitive to gentamycin and chloramphenicol respectively. No strain was sensitive to penicillin and only 5% were sensitive to kanamycin. Isolates from fish and prawn showed higher resistance to ampicillin and none of them was sensitive to kanamycin. Multiple resistant V. parahaemolyticus strains were more in prawn than in other samples.

Antibiotic resistance of Staphylococcus aureus strains isolated from fish processing factory workers

One hundred and twenty two strains of Staphylococcus aureus isolated from throats and palms of 39 workers from 6 fish processing factories situated in and around Cochin were tested for their sensitivity to nine commonly used antibiotics-ampicillin, chloramphenicol, erythromycin, kanamycin, neomycin, penicillin, polymyxin-B, streptomycin and tetracycline. Highest percentage of resistance was observed towards ampicillin followed by penicillin i.e. 64.75% and 59.84%. Resistance towards other antibiotics like tetracycline, polymyxin-B, erythromycin, kanamycin, neomycin, chloramphenicol and streptomycin were shown by 22.95, 16.39, 7.38, 5.74, 3.28 and 1.64% of the isolates respectively.

Effects of constraint curvature on structural instability: tensile buckling and multiple bifurcations

Bifurcation of an elastic structure crucially depends on the curvature of the constraints against which the ends of the structure are prescribed to move, an effect which deserves more attention than it has received so far. In fact, we show theoretically and we provide definitive experimental verification that an appropriate curvature of the constraint over which the end of a structure has to slide strongly affects buckling loads and can induce: (i.) tensile buckling; (ii.) decreasing- (softening), increasing- (hardening), or constant-load (null stiffness) postcritical behaviour; (iii.) multiple bifurcations, determining for instance two bifurcation loads (one tensile and one compressive) in a single-degree-of-freedom elastic system. We show how to design a constraint profile to obtain a desired postcritical behaviour and we provide the solution for the elastica constrained to slide along a circle on one end, representing the first example of an inflexional elastica developed from a buckling in tension. These results have important practical implications in the design of compliant mechanisms and may find applications in devices operating in quasi-static or dynamic conditions.

Tensile response of passivated films with climb-assisted dislocation glide

The tensile response of single crystal films passivated on two sides is analysed using climb enabled discrete dislocation plasticity. Plastic deformation is modelled through the motion of edge dislocations in an elastic solid with a lattice resistance to dislocation motion, dislocation nucleation, dislocation interaction with obstacles and dislocation annihilation incorporated through a set of constitutive rules. The dislocation motion in the films is by glide-only or by climb-assisted glide whereas in the surface passivation layers dislocation motion occurs by glide-only and penalized by a friction stress. For realistic values of the friction stress, the size dependence of the flow strength of the oxidised films was mainly a geometrical effect resulting from the fact that the ratio of the oxide layer thickness to film thickness increases with decreasing film thickness. However, if the passivation layer was modelled as impenetrable, i.e. an infinite friction stress, the plastic hardening rate of the films increases with decreasing film thickness even for geometrically self-similar specimens. This size dependence is an intrinsic material size effect that occurs because the dislocation pile-up lengths become on the order of the film thickness. Counter-intuitively, the films have a higher flow strength when dislocation motion is driven by climb-assisted glide compared to the case when dislocation motion is glide-only. This occurs because dislocation climb breaks up the dislocation pile-ups that aid dislocations to penetrate the passivation layers. The results also show that the Bauschinger effect in passivated thin films is stronger when dislocation motion is climb-assisted compared to films wherein dislocation motion is by glide-only. © 2012 Elsevier Ltd.

A computer algorithm for determining the tensile strength of float glass

The extrinsic tensile strength of glass can be determined explicitly if the characteristics of the critical surface flaw are known, or stochastically if the critical flaw characteristics are unknown. This paper makes contributions to both these approaches. Firstly it presents a unified model for determining the strength of glass explicitly, by accounting for both the inert strength limit and the sub-critical crack growth threshold. Secondly, it describes and illustrates the use of a numerical algorithm, based on the stochastic approach, that computes the characteristic tensile strength of float glass by piecewise summation of the surface stresses. The experimental validation and sensitivity analysis reported in this paper show that the proposed computer algorithm provides an accurate and efficient means of determining the characteristic strength of float glass. The algorithm is particularly useful for annealed and thermally treated float glass used in the construction industry. © 2012 Elsevier Ltd.

Tensile strength of UD-composite laminates with multiple holes

The residual strength of glass fibre reinforced vinyl-ester laminates with multiple holes was investigated through an experimental programme. Different types of structured hole patterns and hole densities were investigated and analysed using digital image correlation strain measuring technique. Three different failure modes could be observed when the hole patterns and the hole densities were a altered. These three failure modes were used as the foundation for a simple yet effective analytical model in order to predict the residual strength of damaged composite specimens. Finally, a number of laminates with randomly distributed holes were tested experimentally. The analytical model can predict the failure mode and failure strength of the experiments with sufficiently good fidelity. © 2010 Elsevier Ltd.

Mechanical behaviour of electrospun fibre-reinforced hydrogels.

Mechanically robust and biomimicking scaffolds are needed for structural engineering of tissues such as the intervertebral disc, which are prone to failure and incapable of natural healing. Here, the formation of thick, randomly aligned polycaprolactone electrospun fibre structures infiltrated with alginate is reported. The composites are characterised using both indentation and tensile testing and demonstrate substantially different tensile and compressive moduli. The composites are mechanically robust and exhibit large strains-to-failure, exhibiting toughening mechanisms observed in other composite material systems. The method presented here provides a way to create large-scale biomimetic scaffolds that more closely mimic the composite structure of natural tissue, with tuneable tensile and compressive properties via the fibre and matrix phases, respectively.

Non linear constitutive models for lattice materials

We use a computational homogenisation approach to derive a non linear constitutive model for lattice materials. A representative volume element (RVE) of the lattice is modelled by means of discrete structural elements, and macroscopic stress-strain relationships are numerically evaluated after applying appropriate periodic boundary conditions to the RVE. The influence of the choice of the RVE on the predictions of the model is discussed. The model has been used for the analysis of the hexagonal and the triangulated lattices subjected to large strains. The fidelity of the model has been demonstrated by analysing a plate with a central hole under prescribed in plane compressive and tensile loads, and then comparing the results from the discrete and the homogenised models. © 2013 Elsevier Ltd.