Water spray cooling of polymers

The cooling process in conventional rotomolding is relatively long due to poor thermal conductivity of plastics. The lack of internal cooling is a major limitation although rapid external cooling is possible. Various internal cooling methodologies have been studied to reduce the cycle time. These include the use of compressed air, cryogenic liquid nitrogen, chilled water coils, and cryogenic liquid carbon dioxide, all of which have limitations. However, this article demonstrates the use of water spray cooling of polymers as a viable and effective method for internal cooling in rotomolding. To this end, hydraulic, pneumatic, and ultrasonic nozzles were applied and evaluated using a specially constructed test rig to assess their efficiency. The effects of nozzle type and different parametric settings on water droplet size, velocity, and mass flow rate were analyzed and their influence on cooling rate, surface quality, and morphology of polymer exposed to spray cooling were characterized. The pneumatic nozzle provided highest average cooling rate while the hydraulic nozzle gave lowest average cooling rate. The ultrasonic nozzle with medium droplet size traveling at low velocity produced satisfactory surface finish. Water spray cooling produced smaller spherulites compared to ambient cooling whilst increasing the cooling rate decreases the percentage crystallinity. © 2011 Society of Plastics Engineers Copyright © 2011 Society of Plastics Engineers.

Total colonic dye-spray increases the detection of diminutive adenomas during routine colonoscopy:a randomized controlled trial

Background: Small adenomas may be missed during colonoscopy, but chromoscopy has been reported to enhance detection. The aim of this randomized-controlled trial was to determine the effect of total colonic dye spray on adenoma detection during routine colonoscopy.

Methods: Consecutive outpatients undergoing routine colonoscopy were randomized to a dye-spray group (0.1% indigo carmine used to coat the entire colon during withdrawal from the cecum) or control group (no dye).

Results: Two hundred fifty-nine patients were randomized, 124 to the dye-spray and 135 to the control group; demographics, indication for colonoscopy, and quality of the preparation were similar between the groups. Extubation from the cecum took a median of 9:05 minutes (range: 2:4824:44 min) in the dye-spray group versus 4:52 minutes (range: 1:42-15:21 min] in the control group (p <0.0001). The proportion of patients with at least 1 adenoma and the total number of adenomas were not different between groups. However, in the dye-spray group significantly more diminutive adenomas (

Conclusions: Dye-spray increases the detection of small adenomas in the proximal colon and patients with multiple adenomas, but long-term outcomes should be studied to determine the clinical value of these findings.

Using Flory-Huggins phase diagrams as a pre-formulation tool for the production of amorphous solid dispersions; a comparison between hot-melt extrusion and spray drying

Objectives: Amorphous drug forms provide a useful method of enhancing the dissolution performance of poorly water-soluble drugs; however, they are inherently unstable. In this article, we have used Flory–Huggins theory to predict drug solubility and miscibility in polymer candidates, and used this information to compare spray drying and melt extrusion as processes to manufacture solid dispersions.
Method:  Solid dispersions were characterised using a combination of thermal (thermogravimetric analysis and differential scanning calorimetry) and spectroscopic (Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction methods. 
Key Findings: Spray drying permitted generation of amorphous solid dispersions to be produced across a wider drug concentration than melt extrusion. Melt extrusion provided sufficient energy for more intimate mixing to be achieved between drug and polymer, which may improve physical stability. It was also confirmed that stronger drug–polymer interactions might be generated through melt extrusion. Remixing and dissolution of recrystallised felodipine into the polymeric matrices did occur during the modulated differential scanning calorimetry analysis, but the complementary information provided from FTIR confirms that all freshly prepared spray-dried samples were amorphous with the existence of amorphous drug domains within high drug-loaded samples. 
Conclusion: Using temperature–composition phase diagrams to probe the relevance of temperature and drug composition in specific polymer candidates facilitates polymer screening for the purpose of formulating solid dispersions.

Capture and loss of electron by MeV ions penetrating through liquid spray:Formation of negative ion and neutral atom beams

Charge changing processes of MeV ions penetrating through liquid spray is confirmed to be abundant source of various energetic negative ion and neutral atom beams its generic nature is demonstrated.

Genotoxic risk of herbicides to Anguilla anguilla L.

No contexto dos contaminantes aquáticos, os herbicidas são considerados como um dos grupos mais perigosos. Uma vez aplicados, estes são facilmente transportados para cursos de água, quer devido a uma pulverização pouco cuidada ou devido a fenómenos de escorrência superficial e/ou subterrânea. A presença destes agroquímicos no ambiente tem vindo a ser associada a efeitos nefastos em organismos não-alvo, como é o caso dos peixes. Contudo, existe ainda uma grande lacuna no que diz respeito à informação científica relacionada com o seu impacto genotóxico. Deste modo, a presente tese foi delineada com o intuito de avaliar o risco genotóxico em peixes de duas formulações de herbicidas: o Roundup®, que tem como princípio activo o glifosato, e o Garlon®, que apresenta o triclopir na base da sua constituição, produtos estes largamente utilizados na limpeza de campos agrícolas, assim como em florestas. Foi ainda planeado desenvolver uma base de conhecimento no que diz respeito aos mecanismos de dano do ADN. Como último objectivo, pretendeu-se contribuir para a mitigação dos efeitos dos agroquímicos no biota aquático, nomeadamente em peixes, fornecendo dados científicos no sentido de melhorar as práticas agrícolas e florestais. Este estudo foi realizado adoptando a enguia europeia (Anguilla anguilla L.) como organismo-teste, e submetendo-a a exposições de curta duração (1 e 3 dias) dos produtos comerciais mencionados, em concentrações consideradas ambientalmente realistas. Para a avaliação da genotoxicidade foram aplicadas duas metodologias: o ensaio do cometa e o teste das anomalias nucleares eritrocíticas (ANE). Enquanto o ensaio do cometa detecta quebras na cadeia do ADN, um dano passível de ser reparado, o aparecimento das ANE revela lesões cromossomais, sinalizando um tipo de dano de difícil reparação. O ensaio do cometa foi ainda melhorado com uma nova etapa que incluiu a incubação com enzimas de reparação (FPG e EndoIII), permitindo perceber a ocorrência de dano oxidativo no ADN. No que diz respeito ao Roundup®, o envolvimento do sistema antioxidante como indicador de um estado próoxidante foi também alvo de estudo. Uma vez que as referidas formulações se apresentam sob a forma de misturas, o potencial genotóxico dos seus princípios activos foi também avaliado individualmente. No caso particular do Roundup®, também foram estudados o seu surfactante (amina polietoxilada; POEA) e o principal metabolito ambiental (ácido aminometilfosfórico; AMPA). Os resultados obtidos mostraram a capacidade do Roundup® em induzir tanto dano no ADN (em células de sangue, guelras e fígado) como dano cromossómico (em células de sangue). A investigação sobre o possível envolvimento do stresse oxidativo demonstrou que o tipo de dano no ADN varia com as concentrações testadas e com a duração da exposição. Deste modo, com o aumento do tempo de exposição, os processos relacionados com o envolvimento de espécies reactivas de oxigénio (ERO) ganharam preponderância como mecanismo de dano no ADN, facto que é corroborado pela activação do sistema antioxidante observado nas guelras, assim como pelo aumento dos sítios sensíveis a FPG em hepatócitos. O glifosato e o POEA foram também considerados genotóxicos. O POEA mostrou induzir uma maior extensão de dano no ADN, tanto comparado com o glifosato como com a mistura comercial. Apesar de ambos os componentes contribuirem para a genotoxicidade da formulação, a soma dos seus efeitos individuais nunca foi observada, apontando para um antagonismo entre eles e indicando que o POEA não aumenta o risco associado ao princípio activo. Deste modo, realça-se a necessidade de regulamentar limiares de segurança para todos os componentes da formulação, recomendando, em particular, a revisão da classificação do risco do POEA (actualmente classificado com “inerte”). Uma vez confirmada a capacidade do principal metabolito do glifosato – AMPA – em exercer dano no ADN assim como dano cromossómico, os produtos da degradação ambiental dos princípios activos assumem-se como um problema silencioso, realçando assim a importância de incluir o AMPA na avaliação do risco relacionado com herbicidas com base no glifosato. A formulação Garlon® e o seu princípio activo triclopir mostraram um claro potencial genotóxico. Adicionalmente, o Garlon® mostrou possuir um potencial genotóxico mais elevado do que o seu princípio activo. No entanto, a capacidade de infligir dano oxidativo no ADN não foi demonstrada para nenhum dos agentes. No que concerne à avaliação da progressão do dano após a remoção da fonte de contaminação, nem os peixes expostos a Roundup® nem os expostos a Garlon® conseguiram restaurar completamente a integridade do seu ADN ao fim de 14 dias. No que concerne ao Roundup®, o uso de enzimas de reparação de lesões específicas do ADN associado ao teste do cometa permitiu detectar um aparecimento tardio de dano oxidativo, indicando deste modo um decaimento progressivo da protecção antioxidante e ainda uma incapacidade de reparar este tipo de dano. O período de pós-exposição correspondente ao Garlon® revelou uma tendência de diminuição dos níveis de dano, apesar de nunca se observar uma completa recuperação. Ainda assim, foi evidente uma intervenção eficiente das enzimas de reparação do ADN, mais concretamente as direccionadas às purinas oxidadas. A avaliação das metodologias adoptadas tornou evidente que o procedimento base do ensaio do cometa, que detecta apenas o dano nãoespecífico no ADN, possui algumas limitações quando comparado com a metodologia que incluiu a incubação com as enzimas de reparação, uma vez que a última mostrou reduzir a possibilidade de ocorrência de resultados falsos negativos. Os dois parâmetros adoptados (ensaio do cometa e teste das ANE) demonstraram possuir aptidões complementares, sendo assim recomendado a sua utilização conjunta com vista a efectuar uma avaliação mais adequada do risco genotóxico. Globalmente, os resultados obtidos forneceram indicações de grande utilidade para as entidades reguladoras, contribuindo ainda para a (re)formulação de medidas de conservação do ambiente aquático. Neste sentido, os dados obtidos apontam para a importância da avaliação de risco dos herbicidas incluir testes de genotoxicidade. A magnitude de risco detectada para ambas as formulações adverte para a necessidade de adopção de medidas restritivas em relação à sua aplicação na proximidade de cursos de água. Como medidas mitigadoras de impactos ambientais, aponta-se o desenvolvimento de formulações que incorporem adjuvantes selecionados com base na sua baixa toxicidade.

Spray-dried polysaccharide microparticles aimed at pulmonary delivery of antitubercular drugs

Dissertação de mestrado, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2015

Modeling and simulation of spray drying processes based on quality by design principles

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2014

Development of a melanoma therapeutic vaccine candidate by the coencapsulation of melanoma antigen peptides and toll-like receptor ligands as adjuvants into polymeric nanoparticles

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2014

Cancer du sein chez la jeune femme: traitements adjuvants et désir de grossesse [Breast cancer in young women: adjuvant therapy and fertility]

Prognosis of breast cancer women has been dramatically improved by the adjuvant therapies. As the vast majority of patients are cured, the importance of long-term quality of life is growing. The question of the maternity is an essential concern for the young women who have to receive chemotherapy or several years of endocrine therapy. This problem is often underestimated and may lead to emotional distress, depression or anxiety. A regional multidisciplinary working group was set up in order to offer optimal information about fertility and cancer as to propose specific therapeutic reproduction options, when applicable. Specificity of the young patients' breast cancer, the treatment approaches and their impact on fertility are discussed in this paper.

Characterizing emission and breathing-zone concentrations following exposure cases to fluororesin-based waterproofing spray mists.

Measurements and simulations were performed to assess workers' exposure to solvent vapors and aerosols during the waterproofing of a tiled surface. This investigation followed two recent incidents in the same company where workers experienced acute respiratory illness after spraying a stain-repellent resin containing fluorinated polymers on stone-tiled walls and floors. Because the waterproofing activity had been done for years at the tile company without encountering any exposure problems prior to these cases, it was strongly suspected that the incidents were linked to a recent change in the composition of the coating mixture. Experimental measurements and simulations indicated that the emission rate of particles smaller than 10 microm may be estimated at 0.66 mg/sec (SD 0.10) for the old resin and at 0.37 mg/sec (SD 0.04) for the new one. The measurement of the solvent emission rate from surfaces coated with the two resins indicated that shortly after spraying, the emission was in the range of 18 to 20 mg/sec x m2 and was similar for both products. Solvent and overspray emission rates were introduced in a two-zone compartment model. The results obtained in the near-field indicate significant exposure to overspray mist (7 and 34 mg/m3 for new resin) and solvent vapors (80 to 350 ppm for the new resin). It was also shown that the introduction of the new resin tended to significantly decrease the levels of solvents and particulates in the workers' breathing zone. These results strongly suggest that cases of acute respiratory illness are related to the specific toxicity of the fluorinated polymer itself. The fact that the same polymer is used in various commercial products raises concern regarding other possible occupational and domestic exposures.

Quantitative multiparameter assays to measure the effect of adjuvants on human antigen-specific CD8 T-cell responses.

Large numbers and functionally competent T cells are required to protect from diseases for which antibody-based vaccines have consistently failed (1), which is the case for many chronic viral infections and solid tumors. Therefore, therapeutic vaccines aim at the induction of strong antigen-specific T-cell responses. Novel adjuvants have considerably improved the capacity of synthetic vaccines to activate T cells, but more research is necessary to identify optimal compositions of potent vaccine formulations. Consequently, there is a great need to develop accurate methods for the efficient identification of antigen-specific T cells and the assessment of their functional characteristics directly ex vivo. In this regard, hundreds of clinical vaccination trials have been implemented during the last 15 years, and monitoring techniques become more and more standardized.

Immunogenicity of dimorphic and C-terminal fragments of Plasmodium falciparum MSP2 formulated with different adjuvants in mice.

BACKGROUND: Plasmodium falciparum MSP2 is a blood stage protein that is associated with protection against malaria. It was shown that the MSP2 dimorphic (D) and constant (C) regions were well recognized by immune human antibodies, and were characterized by major conserved epitopes in different endemic areas and age groups. These Abs recognized merozoite-derived proteins in WB and IFA. Here, the goal was to determine in mice the immunogenicity of the two allelic MSP2 D and C domains formulated with different adjuvants, for their possible use in future clinical studies. METHOD: Female A/J, C3H, and ICR mice were immunized subcutaneously 3 times at 3-week interval with a mixture of allelic and conserved MSP2 long synthetic peptides formulated with different adjuvants. One week after the third injection, sera from each group were obtained and stored at -20°C for subsequent testing. RESULTS: Both domains of the two MSP2 families are immunogenic and the fine specificity and intensity of the Ab responses are dependent on mouse strains and adjuvants. The major epitopes were restricted to the 20-mer peptide sequences comprising the last 8aa of D and first 12aa of C of the two allelic families and the first 20aa of the C region, this for most strains and adjuvants. Strong immune responses were associated with GLA-SE adjuvant and its combination with other TLR agonists (CpG or GDQ) compared to alhydrogel and Montanide. Further, the elicited Abs were also capable of recognizing Plasmodium-derived MSP2 and inhibiting parasite growth in ADCI. CONCLUSION: The data provide a valuable opportunity to evaluate in mice different adjuvant and antigen formulations of a candidate vaccine containing both MSP2 D and C fragments. The formulations with GLA-SE seem to be a promising option to be compared with the alhydrogel one in human clinical trials.

Caractérisation de l'effet des adjuvants CpG et toxine choléra sur la réponse immunitaire générée par le fimbriae F4 administré oralement chez le porc

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal