Social trust : a public good?

Combining theories on social trust and social capital with sociopsychological approaches and applying contextual analyses to Swiss and European survey data, this thesis examines under what circumstances generalised trust, often understood as public good, may not benefit everyone, but instead amplify inequality. The empirical investigation focuses on the Swiss context, but considers different scales of analysis. Two broader questions are addressed. First, might generalised trust imply more or less narrow visions of community and solidarity in different contexts? Applying nonlinear principal component analysis to aggregate indicators, Study 1 explores inclusive and exclusive types of social capital in Europe, measured as regional configurations of generalised trust, civic participation and attitudes towards diversity. Study 2 employs multilevel models to examine how generalised trust, as an individual predisposition and an aggregate climate at the level of Swiss cantons, is linked to equality- directed collective action intention versus radical right support. Second, might high-trust climates impact negatively on disadvantaged members of society, precisely because they reflect a normative discourse of social harmony that impedes recognition of inequality? Study 3 compares how climates of generalised trust at the level of Swiss micro-regions and subjective perceptions of neighbourhood cohesion moderate the negative relationship between socio-economic disadvantage and mental health. Overall, demonstrating beneficial, as well as counterintuitive effects of social trust, this thesis proposes a critical and contextualised approach to the sources and dynamics of social cohesion in democratic societies. -- Cette thèse combine des théories sur le capital social et la confiance sociale avec des approches psychosociales et s'appuie sur des analyses contextuelles de données d'enquêtes suisses et européennes, afin d'étudier dans quelles circonstances la confiance généralisée, souvent présentée comme un bien public, pourrait ne pas bénéficier à tout le monde, mais amplifier les inégalités. Les études empiriques, centrées sur le contexte suisse, intègrent différentes échelles d'analyse et investiguent deux questions principales. Premièrement, la confiance généralisée implique-t-elle des visions plus ou moins restrictives de la communauté et de la solidarité selon le contexte? Dans l'étude 1, une analyse à composantes principales non-linéaire sur des indicateurs agrégés permet d'explorer des types de capital social inclusif et exclusif en Europe, mesurés par des configurations régionales de confiance généralisée, de participation civique, et d'attitudes envers la diversité. L'étude 2 utilise des modèles multiniveaux afin d'analyser comment la confiance généralisée, en tant que prédisposition individuelle et climat agrégé au niveau des cantons suisses, est associée à l'intention de participer à des actions collectives en faveur de l'égalité ou, au contraire, à l'intention de voter pour la droite radicale. Deuxièmement, des climats de haute confiance peuvent-ils avoir un impact négatif sur des membres désavantagés de la société, précisément parce qu'ils reflètent un discours normatif d'harmonie sociale qui empêche la reconnaissance des inégalités? L'étude 3 analyse comment des climats de confiance au niveau des micro-régions suisses et la perception subjective de faire partie d'un environnement cohésif modèrent la relation négative entre le désavantage socio-économique et la santé mentale. En démontrant des effets bénéfiques mais aussi contre-intuitifs de la confiance sociale, cette thèse propose une approche critique et contextualisée des sources et dynamiques de la cohésion sociale dans les sociétés démocratiques.

Social justice in education : how the function of selection in educational institutions predicts support for (non)egalitarian assessment practices

Educational institutions are considered a keystone for the establishment of a meritocratic society. They supposedly serve two functions: an educational function that promotes learning for all, and a selection function that sorts individuals into different programs, and ultimately social positions, based on individual merit. We study how the function of selection relates to support for assessment practices known to harm vs. benefit lower status students, through the perceived justice principles underlying these practices. We study two assessment practices: normative assessment-focused on ranking and social comparison, known to hinder the success of lower status students-and formative assessment-focused on learning and improvement, known to benefit lower status students. Normative assessment is usually perceived as relying on an equity principle, with rewards being allocated based on merit and should thus appear as positively associated with the function of selection. Formative assessment is usually perceived as relying on corrective justice that aims to ensure equality of outcomes by considering students' needs, which makes it less suitable for the function of selection. A questionnaire measuring these constructs was administered to university students. Results showed that believing that education is intended to select the best students positively predicts support for normative assessment, through increased perception of its reliance on equity, and negatively predicts support for formative assessment, through reduced perception of its ability to establish corrective justice. This study suggests that the belief in the function of selection as inherent to educational institutions can contribute to the reproduction of social inequalities by preventing change from assessment practices known to disadvantage lowerstatus student, namely normative assessment, to more favorable practices, namely formative assessment, and by promoting matching beliefs in justice principles.

Suojakaasuseoksen koostumuksen vaikutus CO2-laser-MAG-hybridihitsauksessa

Hitsaavassa teollisuudessa kilpailukyvyn säilyttäminen edellyttää hitsauksen tehokkuuden nostoa. Niinpä metalliteollisuus etsii kuumeisesti uusia yhä tehokkaampia hitsausmenetelmiä. CO2-laserin ja MAG:in yhdistelmän muodostamalla hybridihitsauksella saadaan aikaan syvä tunkeuma kuten laserhitsauksessa, mutta sallitaan laserhitsausta väljemmät railotoleranssit. Samalla muodonmuutokset vähenevät huomattavasti verrattuna perinteiseen kaarihitsaukseen. Kaariavusteisessa laserhitsauksessa yhdistetään laserhitsaukseen perinteinen kaarihitsaus eli MIG/MAG-, TIG- tai plasmahitsaus. Menetelmää voidaan kutsua myös hybridihitsaukseksi ja sillä hyödynnetään molempien prosessien edut välttyen yksittäisten prosessien haitoilta. Prosessin haittapuolena on parametrien suuri määrä, joka on rajoittanut menetelmän käyttöönottoa. Diplomityössä tutkittiin suojakaasuseoksen koostumuksen vaikutusta rakenneteräksen CO2-laser-MAG-hybridihitsauksessa. Laserhitsauksen ja MAG-hitsauksen suojakaasuvirtaukset yhdistettiin siten, että heliumseosteinen suojakaasu tuotiin MAG-polttimen kaasukuvun kautta. Suojakaasun heliumpitoisuus nostettiin niin korkeaksi, että estettiin laserhitsauksen muodostaman plasman syntyminen. Samalla hitsauskokeissa opittiin paremmin ymmärtämään prosessia ja sen parametrien riippuvuutta toisiinsa. Tutkitut suojakaasuseokset koostuivat heliumista, argonista ja hiilidioksidista. Hitsauskokeiden perusteella havaittiin, että suojakaasuseoksen optimaalinen heliumpitoisuus on 40-50 %. Tällöin laserin tunkeumaa häiritsevää plasmapilveä ei synny ja prosessi on stabiili. Päittäisliitosten hitsauksessa suojakaasuseoksen 2 %:n CO2-pitoisuudella saadaan aikaan hyvin vähän huokosia sisältävä hitsi, jonka tunkeumaprofiilin muoto ja liittymä perusaineeseen on juoheva. Pienaliitoksilla 7 %:n CO2-pitoisuudella prosessi pysyy stabiilina ja vähäroiskeisena. Tunkeuma hieman levenee hitsin keskeltä ja hitsin liittyminen perusaineeseen on juoheva.CO2-laser-MAG-hybridihitsauksella aikaansaadaan laadukkaita hitsejä taloudellisesti, mikäli käytetyt parametrit ovat oikein valittuja. Parametrit on sovitettava jokaiseen hitsaustapaukseen erikseen, eikä niitä välttämättä voida suoraan käyttää toisessa tapauksessa.

Monikanavaisuuden hyödyt ja haitat - tutkimus monikanavaisuudesta palveluntarjoajan ja asiakkaan näkökulmasta

Tämän tutkimuksen tavoitteena oli selvittää, voidaanko asiakkaan ja palveluntarjoajan odotukset yhdistää muodostettaessa palveluntarjoajan monikanavamallia. Monikanavaisuus tuo asiakkaalle mahdollisuuksia ajasta ja paikasta riippumattomaan asiointiin. Asiakkaan näkökulmasta tämä tarkoittaa usein sitä, että hänen oppimansa asiointitapa muuttuu. Asiakas kokee haittana sen, että joutuu panostamaan uuden asiointitavan opettelemiseen ja odottaa tämän muutoksen tuovan hänelle hyötyjä. Monikanavaisuuden hyödyt asiakkaalle punnitaan tässä muutostilanteessa. Palveluntarjoaja odottaa monikanavamallin tuovan kustannussäästöjä, sillä kanavavalinnat ovat keino kehittää asiakkuuksia ja vaikuttaa yrityksen kannattavuuteen pitkällä aikajänteellä. Monikanavamallin toteuttaminen vaatii palveluntarjoajalta alkuvaiheessa resursseja, investointeja ja halutun muutoksen tavoitteellista johtamista. Tutkittavat asiakkaat valittiin Suomen Posti Oyj:n Yritykset ja yritykset –asiakassegmentistä. Tutkimuksessa ei löytynyt asiakaskohtaisia eroja asiakkaiden odotuksista palveluntarjoajien monikanavamalleihin, mutta hyötyodotusten suhteen tunnistettiin kolme erilaista asiakastyyppiä: kustannussäästöjä odottavat hintaorientoituneet asiakkaat, palvelun entistä parempaa sujumista odottavat palveluorientoituneet asiakkaat ja oman valinnanvapautensa merkitystä painottavat asiakassuhdeorientoituneet asiakkaat. Palveluntarjoajan tulee pystyä viestimään ja argumentoimaan asiointitavan muutoksesta kullekin asiakkaalle merkityksellisellä tavalla. Teorian ja empirian pohjalta voidaan sanoa, että asiakkaan ja palveluntarjoajan odotukset voidaan yhdistää muodostettaessa palveluntarjoajan monikanavamallia. Tämä edellyttää, että palveluntarjoaja tuntee asiakkaansa niin hyvin, että tietää millaiset eri asiakkaiden hyötyodotukset ovat.

Incumbency (dis)advantage when citizens can propose

This paper analyses the problem that an incumbent faces during the legislature when deciding how to react to citizen proposals such as the outcome of referenda or popular initiatives. We argue that these proposals constitute a potential source of electoral disadvantage when citizens factor in their evaluation of the incumbent his reaction to these proposals. This is because an incumbent politician may jeopardize his re-election by implementing policies close to his preferred ones but unpopular among the electorate. We characterize conditions under which this potential disadvantage becomes in fact an electoral advantage for the incumbent. We find that the choices of the incumbent during the legislature will be closest to citizens policy proposals when the intensity of electoral competition is neither too soft nor too tough. Finally, we use our results to discuss some implications of the use of mechanisms such as referenda and popular assemblies on electoral competition and on the incumbency advantage phenomenon.

Responding to Young People's Health Risks in Primary Care: A Cluster Randomised Trial of Training Clinicians in Screening and Motivational Interviewing.

OBJECTIVE: To evaluate the effectiveness of a complex intervention implementing best practice guidelines recommending clinicians screen and counsel young people across multiple psychosocial risk factors, on clinicians' detection of health risks and patients' risk taking behaviour, compared to a didactic seminar on young people's health. DESIGN: Pragmatic cluster randomised trial where volunteer general practices were stratified by postcode advantage or disadvantage score and billing type (private, free national health, community health centre), then randomised into either intervention or comparison arms using a computer generated random sequence. Three months post-intervention, patients were recruited from all practices post-consultation for a Computer Assisted Telephone Interview and followed up three and 12 months later. Researchers recruiting, consenting and interviewing patients and patients themselves were masked to allocation status; clinicians were not. SETTING: General practices in metropolitan and rural Victoria, Australia. PARTICIPANTS: General practices with at least one interested clinician (general practitioner or nurse) and their 14-24 year old patients. INTERVENTION: This complex intervention was designed using evidence based practice in learning and change in clinician behaviour and general practice systems, and included best practice approaches to motivating change in adolescent risk taking behaviours. The intervention involved training clinicians (nine hours) in health risk screening, use of a screening tool and motivational interviewing; training all practice staff (receptionists and clinicians) in engaging youth; provision of feedback to clinicians of patients' risk data; and two practice visits to support new screening and referral resources. Comparison clinicians received one didactic educational seminar (three hours) on engaging youth and health risk screening. OUTCOME MEASURES: Primary outcomes were patient report of (1) clinician detection of at least one of six health risk behaviours (tobacco, alcohol and illicit drug use, risks for sexually transmitted infection, STI, unplanned pregnancy, and road risks); and (2) change in one or more of the six health risk behaviours, at three months or at 12 months. Secondary outcomes were likelihood of future visits, trust in the clinician after exit interview, clinician detection of emotional distress and fear and abuse in relationships, and emotional distress at three and 12 months. Patient acceptability of the screening tool was also described for the intervention arm. Analyses were adjusted for practice location and billing type, patients' sex, age, and recruitment method, and past health risks, where appropriate. An intention to treat analysis approach was used, which included multilevel multiple imputation for missing outcome data. RESULTS: 42 practices were randomly allocated to intervention or comparison arms. Two intervention practices withdrew post allocation, prior to training, leaving 19 intervention (53 clinicians, 377 patients) and 21 comparison (79 clinicians, 524 patients) practices. 69% of patients in both intervention (260) and comparison (360) arms completed the 12 month follow-up. Intervention clinicians discussed more health risks per patient (59.7%) than comparison clinicians (52.7%) and thus were more likely to detect a higher proportion of young people with at least one of the six health risk behaviours (38.4% vs 26.7%, risk difference [RD] 11.6%, Confidence Interval [CI] 2.93% to 20.3%; adjusted odds ratio [OR] 1.7, CI 1.1 to 2.5). Patients reported less illicit drug use (RD -6.0, CI -11 to -1.2; OR 0·52, CI 0·28 to 0·96), and less risk for STI (RD -5.4, CI -11 to 0.2; OR 0·66, CI 0·46 to 0·96) at three months in the intervention relative to the comparison arm, and for unplanned pregnancy at 12 months (RD -4.4; CI -8.7 to -0.1; OR 0·40, CI 0·20 to 0·80). No differences were detected between arms on other health risks. There were no differences on secondary outcomes, apart from a greater detection of abuse (OR 13.8, CI 1.71 to 111). There were no reports of harmful events and intervention arm youth had high acceptance of the screening tool. CONCLUSIONS: A complex intervention, compared to a simple educational seminar for practices, improved detection of health risk behaviours in young people. Impact on health outcomes was inconclusive. Technology enabling more efficient, systematic health-risk screening may allow providers to target counselling toward higher risk individuals. Further trials require more power to confirm health benefits. TRIAL REGISTRATION: ISRCTN.com ISRCTN16059206.

Early childhood constraint therapy for sensory/motor impairment in cerebral palsy: a randomised clinical trial protocol.

INTRODUCTION: Cerebral palsy (CP) is the most common physical disability in childhood. It is a disorder resulting from sensory and motor impairments due to perinatal brain injury, with lifetime consequences that range from poor adaptive and social function to communication and emotional disturbances. Infants with CP have a fundamental disadvantage in recovering motor function: they do not receive accurate sensory feedback from their movements, leading to developmental disregard. Constraint-induced movement therapy (CIMT) is one of the few effective neurorehabilitative strategies shown to improve upper extremity motor function in adults and older children with CP, potentially overcoming developmental disregard. METHODS AND ANALYSIS: This study is a randomised controlled trial of children 12-24 months corrected age studying the effectiveness of CIMT combined with motor and sensory-motor interventions. The study population will comprise 72 children with CP and 144 typically developing children for a total of N=216 children. All children with CP, regardless of group allocation will continue with their standard of care occupational and physical therapy throughout the study. The research material collected will be in the form of data from high-density array event-related potential scan, standardised assessment scores and motion analysis scores. ETHICS AND DISSEMINATION: The study protocol was approved by the Institutional Review Board. The findings of the trial will be disseminated through peer-reviewed journals and scientific conferences. TRIAL REGISTRATION NUMBER: NCT02567630.

Whole-body magnetic resonance imaging in children: state of the art

Whole-body imaging in children was classically performed with radiography, positron-emission tomography, either combined or not with computed tomography, the latter with the disadvantage of exposure to ionizing radiation. Whole-body magnetic resonance imaging (MRI), in association with the recently developed metabolic and functional techniques such as diffusion-weighted imaging, has brought the advantage of a comprehensive evaluation of pediatric patients without the risks inherent to ionizing radiation usually present in other conventional imaging methods. It is a rapid and sensitive method, particularly in pediatrics, for detecting and monitoring multifocal lesions in the body as a whole. In pediatrics, it is utilized for both oncologic and non-oncologic indications such as screening and diagnosis of tumors in patients with genetic syndromes, evaluation of disease extent and staging, evaluation of therapeutic response and post-therapy follow-up, evaluation of non neoplastic diseases such as multifocal osteomyelitis, vascular malformations and syndromes affecting multiple regions of the body. The present review was aimed at describing the major indications of whole-body MRI in pediatrics added of technical considerations.

Automobile Corporate Networks in Europe : Sectoral Specialization of Central and Eastern European Cities

The global automobile industry is made up of very large corporations and their various subsidiaries containing different functions that create complex locational structures. The networks formed by the 19 largest automobile transnational corporations constitute an automobile "oligopoly" representing more than 90% (OICA, 2012) of the world's production. Since the mid-1990s, Central and Eastern European cities have become attractive for transnational corporations and particularly for the production functions in the automobile sector. This leads to a crucial question. Are strategic functions (such as R&D) within these networks also located in Central and Eastern Europe, or is the region still manufacturing-oriented in the automobile industry? This paper focuses on the patterns and the main factors influencing the role of some of these new central and Eastern European cities that have become integrated in the global value chain of the automobile industry. By analysing the various locations of the specialized functions within the corporations, this study aims to extend the research on global value chains (Gereffi and Korzeniewicz; 1994, Sturgeon, 2000; Krätke, 2014). The spatial patterns of the various functions and the ownerships networks of the automobile industry are constructed in order to identify the cities supporting it. In particular, the way that national metropolises bring their national territories into the globalization of the automobile industry is addressed. For example, are there some specific advantages of capital cities compared to cities that have less integration in globalization terms?

Kuusiviilun esikuivaus puristamalla

Tutkimuksen lähtökohtana oli selvittää, voidaanko viilun valmistusprosessiin liittää uusi työvaihe, viilun esikuivaus. Esikuivauksen tarkoituksena on poistaa kosteutta viiluista ennen varsinaista kuivausta ja lisätä näin kuivauskapasiteettia. Tehdyissä tutkimuksissa viilut esikuivattiin nipuissa puristamalla. Muuttujina esikuivauksessa toimivat puristusaika ja -paine. Niiden määrittelyn lähtökohtana pidettiin sitä, etteivät viilun ominaisuudet saa merkittävästi heikentyä esikuivauksen aikana ja samalla viiluista on saatava mahdollisimman paljon kosteutta pois. Aikaisempien tutkimusten avulla selvitettiin vanerin valmistuksen, viilun kuivauksen sekä viilun esikuivauksen teoriaa. Lisäksi selvitettiin puun ominaisuuksien antamia mahdollisuuksia ja rajoitteita esikuivaukseen liittyen. Tutkimus koostui kahdesta osasta: laboratorio- ja tehdastutkimuksista. Laboratoriotutkimuksen tarkoituksena oli toimia tehdastutkimuksen esitutkimuksena. Laboratoriotutkimuksessa tutkittiin ainoastaan esikuivauksen vaikutusta märille viiluille. Tehdastutkimusosiossa esikuivatuista viiluista valmistettiin normaalin vanerinvalmistusprosessin kautta levyjä, joiden ominaisuuksia verrattiin normaaleista viiluista valmistettuihin vanereihin. Viilujen esikuivauksen todettiin pienentävän kuusiviilujen kosteuspitoisuutta. Tämän lisäksi kosteuspitoisuuden muutokset esikuivauksen aikana tapahtuivat tasaisesti niin yksittäisen viilun kuin viilunipunkin sisällä. Esikuivatuista viiluista valmistetut vanerilevyt täyttivät kaikki standardien sekä vanerin laadunvalvontasopimuksen asettamat vaatimukset. Esikuivauksen haitaksi tutkimuksissa todettiin viilun paksuuden pienentymä. Ennen esikuivauksen soveltamista teolliseen käyttöön nähtiin tarvetta lisätutkimukselle, jossa tulisi selvittää suurempien viilunippukokojen esikuivaamista sekä niiden varsinaista kuivaamista heti esikuivauksen jälkeen.

Sistema per gestionar les incidències d'un servei d'informàtica amb una arquitectura J2EE distribuïda en tres nivells

Tant en la meva etapa d’estudiant com en la meva curta vida laboral, he participat en el desenvolupament de varies aplicacions de gestió, tant d’escriptori com web, que majoritàriament sempre estaven dividides en tres capes però en dos nivells: la base de dades i l’aplicació, que contenia tant la lògica de negoci com la vista. Des de fa temps he tingut la curiositat i la necessitat d’intentar desenvolupar una aplicació de gestió que estigui distribuïda en tres o més nivells, separant el model de dades i la lògica de negoci de la vista. Crec que el treball de fi de carrera és idoni per desenvolupar-la. L’aplicació a desenvolupar anirà destinada a la gestió d’un servei d’informàtica, que s’encarrega de resoldre les incidències, inventariar i realitzar el manteniment preventiu dels equips informàtics d’una o de varies empreses. Es crearà una aplicació que contindrà el model de dades i la lògica de negoci. També es crearan dues aplicacions clients: una aplicació d’escriptori que donarà accés a totes i cadascuna de les funcionalitats del sistema i una aplicació web que oferirà un accés lleuger i des de qualsevol ubicació a les funcionalitats d’explotació del sistema. Per últim, també es crearà una altre aplicació web que s’encarregarà de generar els llistats sol•licitats per les dues aplicacions clients. D’aquesta manera també es centralitzarà la gestió dels llistats de les aplicacions del sistema. Per desenvolupar el sistema, s’utilitzarà la plataforma J2EE de Java, i es comptarà amb l’ajuda de marcs de treball com, per exemple, Oracle ADF o JasperReports. Com a conclusió general, puc assegurar que si es distribueixen les tres capes d’un sistema en tres nivells s’obtenen beneficis en l’administració, en el manteniment, en l’escalabilitat, en la flexibilitat i en la reutilització de les aplicacions. El principal inconvenient és el possible augment de lentitud en les aplicacions clients.

Sistema educativo e igualdad de oportunidades entre los jóvenes tutelados: estudios recientes en el Reino Unido

Educational system and equal opportunities for young people in care: Recent studies in the UK. Publications on research about formal educational itineraries of people who were cared for by the social protection public systems when they were children are scarce, and restricted to a few countries. In recent years, statistics from some European countries have been published, showing that the young people who were cared for are overrepresented in practically all the clusters of people that accumulate indicators of social disadvantage, and it has therefore been argued that they can be considered one of the groups of population with the highest risk for social exclusion. In the present review, the emergence of new data and research results in some European countries —particularly in the United Kingdom, where the fact that less than 5% of this population reaches university studies has been underlined— is tentatively contextualised. Although the extent to which current available data can be extrapolated to other contexts and countries is yet unclear, such results raise important challenges for social intervention and social policies, as well as for psychosocial research, in all countries of the European space

Estratégias de pré-concentração em eletroforese capilar: parte 2. Manipulação da velocidade da fase dispersa/secundária

This work describes CE preconcentration strategies based on the effect of manipulation of the disperse/secondary velocity. Introduced by Terabe et al. in 1984, micellar electrokinetic chromatography is a powerful separation approach that increases the usage of electrokinetic phenomena for the separation of nonionic compounds. The main disadvantage of MEKC is the low concentration sensitivity associated with the limited optical path length for on-capillary photometric detection and the limited volume of sample solution that can be injected. This paper compiles on-line concentration strategies for neutral analytes by sample stacking and sweeping in micellar electrokinetic chromatography.

Surface Modification of Ceramics

Ceramics are widely used in industrial applications due to their advantageous thermal and mechanical stability. Corrosion of ceramics is a great problem resulting in significant costs. Coating is one method of reducing adversities of corrosion. There are several different thin film deposition processes available such as sol-gel, Physical and Chemical Vapour Deposition (PVD and CVD). One of the CVD processes, called Atomic Layer Deposition (ALD) stands out for its excellent controllability, accuracy and wide process capability. The most commonly mentioned disadvantage of this method is its slowness which is partly compensated by its capability of processing large areas at once. Several factors affect the ALD process. Such factors include temperature, the grade of precursors, pulse-purge times and flux of precursors as well as the substrate used. Wrongly chosen process factors may cause loss of self-limiting growth and thus, non-uniformities in the deposited film. Porous substrates require longer pulse times than flat surfaces. The goal of this thesis was to examine the effects of ALD films on surface properties of a porous ceramic material. The analyses applied were for permeability, bubble point pressure and isoelectric point. In addition, effects of the films on corrosion resistance of the substrate in aqueous environment were investigated. After being exposured to different corrosive media the ceramics and liquid samples collected were analysed both mechanically and chemically. Visual and contentual differences between the exposed and coated ceramics versus the untreated and uncoated ones were analysed by scanning electron microscope. Two ALD film materials, dialuminium trioxide and titanium dioxide were deposited on the ceramic substrate using different pulse times. The results of both film materials indicated that surface properties of the ceramic material can be modified to some extent by the ALD method. The effect of the titanium oxide film on the corrosion resistance of the ceramic samples was observed to be fairly small regardless of the pulse time.

Microwave Processes in Ferrite-ferroelectric Layered Structure

This work is devoted to investigation of wave processes in new hybrid ferrite/ferroelectric structures. Spin wave devices based on ferrite films have disadvanteges. And their applications are limited. Investigated structures allow to overcome disadvantages. This investigation helps to create new class of devices. Electromagnetic analysis of hybrid spin-electromagnetic waves in ferrite/ferroelectric structures were done. As a result dispersion relation was found. Numerical solution of this dispersion relation gave us follow results. These structures can be effectively tuned by external electric and magnetic field. Methods to increase tuning range were suggested. It was found that such structures have one basic disadvantage which is connected with presence of thick ferroelectric layer. To solve this problem is to use thin ferroelectric films. But this decreases tuning range. It was confirmed by experiment that this structures can be effectively tuned by electric and magnetic fields. Resonance characteristics of ferrite/ferroelectric resonator were succesfully tuned by magnetic and electric field.