Sedimentology on profile Co1202 from Lake Ohrid

Lake Ohrid is probably of Pliocene age, and the oldest extant lake in Europe. In this study climatic and environmental changes during the last glacial-interglacial cycle are reconstructed using lithological, sedimentological, geochemical and physical proxy analysis of a 15-m-long sediment succession from Lake Ohrid. A chronological framework is derived from tephrochronology and radiocarbon dating, which yields a basal age of ca. 136 ka. The succession is not continuous, however, with a hiatus between ca. 97.6 and 81.7 ka. Sediment accumulation in course of the last climatic cycle is controlled by the complex interaction of a variety of climate-controlled parameters and their impact on catchment dynamics, limnology, and hydrology of the lake. Warm interglacial and cold glacial climate conditions can be clearly distinguished from organic matter, calcite, clastic detritus and lithostratigraphic data. During interglacial periods, short-term fluctuations are recorded by abrupt variations in organic matter and calcite content, indicating climatically-induced changes in lake productivity and hydrology. During glacial periods, high variability in the contents of coarse silt to fine sand sized clastic matter is probably a function of climatically-induced changes in catchment dynamics and wind activity. In some instances tephra layers provide potential stratigraphic markers for short-lived climate perturbations. Given their widespread distribution in sites across the region, tephra analysis has the potential to provide insight into variation in the impact of climate and environmental change across the Mediterranean.

(Table 1) Biostratigraphic datums of ODP Leg 133 sites

We use benthic foraminifers to reconstruct the Neogene paleobathymetric history of the Marion Plateau, Queensland Plateau, Townsville Trough, and Queensland Trough on the northeastern Australian margin (Ocean Drilling Program Leg 133). Western Queensland Plateau Site 811/825 (present depth, ~938 m) deepened from the neritic zone (0-200 m) to the upper bathyal zone (200-600 m) during the middle Miocene (~13-14 Ma), with further deepening into the middle bathyal zone (600-1000 m) occurring during the late Miocene (~7 Ma). A depth transect across the southern Queensland Plateau shows that deepening from the outer neritic zone (100-200 m) to the upper bathyal zone began during the latest Miocene (~6 Ma) at the deepest location (Site 813, present depth, 539.1 m), whereas the shallower Sites 812 and 814 (present depths, 461.6 and 520.4 m, respectively) deepened during the late Pliocene (~2.7 and ~2.9 Ma). At Marion Plateau Site 815 (present depth, 465.5 m), water depth increased during the late Miocene (~6.7 Ma) from the outer neritic to the upper bathyal zone. Nearby Site 816 (present water depth, 437.3 m) contains Pliocene upper bathyal assemblages that directly overlie middle Miocene shallow neritic deposits; the timing of the deepening is uncertain because of a late Miocene hiatus. On the northern slope of the Townsville Trough (Site 817, present depth, 1015.8 m), benthic foraminifers and sponge spicules indicate deepening from the lower upper bathyal (400-600 m) to the middle bathyal zone in the late Miocene (by ~6.8 Ma). Benthic foraminiferal faunas at nearby Site 818 (present water depth, 752.1 m) do not show evidence of paleobathymetric change; however, a late Pliocene (~2-3 Ma) increase in downslope transport may have been related to the drowning of the Queensland Plateau. Site 822 (present depth, 955.2 m), at the base of the Great Barrier Reef slope, deepened from the upper bathyal to the middle bathyal zone during the late Pliocene (by ~2.3 Ma). Queensland Trough Site 823 (present depth, 1638.4 m) deepened from the middle bathyal to the lower bathyal (1000-2000 m) zone during the late Miocene (~6.5 Ma). Benthic foraminiferal faunal changes at these Leg 133 sites indicate that rapid deepening occurred during the middle Miocene (~13-14 Ma), late Miocene (6-7 Ma), and late Pliocene (2-3 Ma) along the northeastern Australian margin.

(Table 1) Sedimentary thicknesses, lithologies, ages, and interpreted paleowater depths for ODP Sites 135-840 and 135-841

The sedimentary succession drilled at Sites 840 and 841 on the Tonga forearc allows the sedimentary evolution of the active margin to be reconstructed since shortly after the initiation of subduction during the mid Eocene. Sedimentation has been dominated by submarine fan deposits, principally volcaniclastic turbidites and mass-flows derived from the volcanic arc. Volcaniclastic sedimentation occurred against a background of pelagic nannofossil sedimentation. A number of upward-fining cycles are recognized and are correlated to regional tectonic events, such as the rifting of the Lau Basin at 5.6 Ma. Episodes of sedimentation dating from 16.0 and 10.0 Ma also correlate well with major falls in eustatic sea level and may be at least partially caused by the resulting enhanced erosion of the arc edifice. The early stages of rifting of the Lau Basin are marked by the formation of a brief hiatus at Site 840 (Horizon A), probably a result of the uplift of the Tonga Platform. Controversy exists as to the degree and timing of the uplift of Site 840 before Lau Basin rifting, with estimates ranging from 2500 to 300 m. Structural information favors a lower value. Breakup of the Tonga Arc during rifting resulted in deposition of dacite-dominated, volcaniclastic mass flows, probably reflecting a maximum in arc volcanism at this time. A pelagic interval at Site 840 suggests that no volcanic arc was present adjacent to the Tonga Platform from 5.0 to 3.0 Ma. This represents the time between separation of the Lau Ridge from the Tonga Platform and the start of activity on the Tofua Arc at 3.0 Ma. The sedimentary successions at both sites provide a record of the arc volcanism despite the reworked nature of the deposits. Probe analyses of volcanic glass grains from Site 840 indicate a consistent low-K tholeiite chemistry from 7.0 Ma to the present, possibly reflecting sediment sourcing from a single volcanic center over long periods of time. Trace and rare-earth-element (REE) analyses of basaltic glass grains indicate that thinning of the arc lithosphere had begun by 7.0 Ma and was the principle cause of a progressive depletion of the high-field-strength (HFSE), REE, and large-ion-lithophile (LILE) elements within the arc magmas before rifting. Magmatic underplating of the Tofua Arc has reversed this trend since that time. Increasing fluid flux from the subducting slab since basin rifting has caused a progressive enrichment in LILEs. Subduction erosion of the underside of the forearc lithosphere has caused continuous subsidence and tilting toward the trench since 37.0 Ma. Enhanced subsidence occurred during rifting of the South Fiji and Lau basins. Collision of the Louisville Ridge with the trench has caused no change in the nature of the sedimentation, but it may have been responsible for up to 300 m of uplift at Site 840.

Calcareous nannofossil abundance and datums of ODP Leg 189 sites

Quaternary sediments were recovered at all five sites drilled during Ocean Drilling Program (ODP) Leg 189 in the Tasmanian Gateway. Two of these sites lie north of the present-day Subtropical Front (STF), and three sites lie south of the STF. Quaternary sediments recovered at Sites 1168, 1170, 1171, and 1172 were studied in detail to determine the calcareous nannofossil biostratigraphy and construct an age model for these sediments. The Pliocene/Pleistocene boundary was identified by the last occurrence (LO) of Discoaster brouweri at Site 1172 and approximated by the LO of Calcidiscus macintyrei at the other sites because of a lack of discoasterids. A hiatus encompassing the entire Helicosphaera sellii Zone was tentatively identified at Sites 1168 and 1172 by the coincident LOs of C. macintyrei and H. sellii. Similar hiatuses have been noted at ODP Site 1127 on the Great Australian Bight, Deep Sea Drilling Project Site 282 off the Tasman subcontinent, and ODP Site 1165 in Prydz Bay, Antarctica.

Abundance of palynomorphs and dinoflagellate stratigraphy of ODP Hole 184-1148A, South China Sea

Dinoflagellate stratigraphy is described for the section from 364.75 to 843.85 meters below seafloor (mbsf) at Site 1148 (Sections 184-1148A-40X-1 through 76X-6 and 184-1148B-39X-CC through 56X-1) in the South China Sea. Two assemblage zones and two subzones are defined, based on characteristics of the assemblages and lowest/highest occurrences of some key species. These are the Cleistosphaeridium diversispinosum Assemblage Zone (Zone A; Oligocene), with the Enneadocysta pectiniformis Subzone (Subzone A-1) and the Cordosphaeridium gracile Subzone (Subzone A-2), and the Polysphaeridium zoharyi Assemblage Zone (Zone B; early Miocene). The highest concurrent occurrence of Enneadocysta arcuata, Eneadocysta multicornuta, Homotryblium plectilum, and Homotryblium tenuispinosum delineates the upper boundary of Zone A, which appears to mark a hiatus. Subzone A-1 is of early Oligocene age, as evidenced by the highest occurrences of E. pectiniformis and Phthanoperidinium amoenum at the upper boundary of the subzone. Subzone A-2 is of late Oligocene age based on the highest occurrences of C. gracile and Wetzeliella gochtii close to the upper boundary of the subzone and the occurrence of Distatodinium ellipticum and Membranophoridium aspinatum within the subzone. Zone B is dated as early Miocene based on the lowest occurrences of Cerebrocysta satchelliae, Hystrichosphaeropsis obscura, Melitasphaeridium choanophorum, Membranilarnacia? picena, and Tuberculodinium vancampoae within the zone. The present assemblage zones/subzones are correlative to various degrees with coeval zones/assemblages from areas of high to low latitudes in terms of common key species. We have compared the species content of the assemblage Zones A and B, and the subzones A-1 and A-2, with coeval assemblage(s)/zone(s) described from many, often widely distant, high- and low-latitude regions of the world. These comparisons show that, to various degrees and aside from a number of key species, the coordinated presence of certain important species may also help to assign an age to a given assemblage.

Proceedings of the society at its 34th- annual meeting ...

Proceedings for 1932 reprinted from the Wisconsin magazine of history, v. 16. Proceedings for 1933-1935 published in the Wisconsin magazine of history, only.

Proceedings of the State Historical Society of Wisconsin at its ... annual meeting.

1887-91, annual meeting held in January; 1891- in December.

Stephanostomum tantabiddii n. sp. (Digenea: Acanthocolpidae) from Carangoides fulvoguttatus (Forsskal, 1775) (Perciformes: Carangidae) from Ningaloo Reef, Western Australia

A new species, Stephanostomum tantabiddii n. sp., is described from the yellowspotted trevally Carangoides fulvoguttatus from Ningaloo Reef, Western Australia. It has 38 - 45 circum-oral spines and the vitellarium reaches to no less than 17% of the hindbody length from the ventral sucker. It differs from other species of Stephanostomum with these characteristics by various combinations of the ventral hiatus of the circum-oral spine rows, the relatively long pars prostatica and short ejaculatory duct, the elongate body and the wide gaps between the gonads.

Palaeoclimatic implications of the growth history and stable isotope (delta O-18 and delta C-13) geochemistry of a Middle to Late Pleistocene stalagmite from central-western Italy

The age structure and, stable isotope composition of a stalagmite (CC I) from an upland cave in central-western Italy were studied to investigate regional response to global climatic changes. Four growth phases are constrained by 28 thermal ionization and multi-collector inductively coupled plasma mass spectrometry Th-U ages and reveal intermittent deposition through the period between Marine isotope Stage (MIS) 11 and 3 (similar to380 and similar to43 kyr). Most of the growth took place between similar to380 and similar to280 kyr, a period punctuated briefly by a hiatus in deposition through the glacial maximum of MIS 10. Growth was terminated abruptly at 280 kyr just prior to the MIS 8 glacial maximum. With a present-day chamber temperature of 7.5 degreesC, the timing of hiatuses close to these glacial maxima point to freezing conditions at the time. No deposition was recorded through the entirety of MIS 7 and most of MIS 6, whilst two minor growth phases occurred at similar to141-125 and similar to43 kyr. Growth at 141 kyr indicates temperatures >0 degreesC at a time when MIS 6 ice volumes were close to their maximum. High stable carbon isotope (delta(13)C) values (similar to2.8parts per thousand to +3.1parts per thousand) throughout the stalagmite's growth reflect a persistently low input of biogenic CO2, indicating that the steep, barren and alpine-like recharge area of today ha's been in existence for at least the last similar to380 kyr. During MIS 9, the lowest delta(13)C values occur well after maximum interglacial conditions, suggesting a lag in the development of post-glacial soils in this high-altitude karst. The stable oxygen isotope (delta(18)O) trends match the main structural features of the major climate proxy records (SPECMAP, Vostok and Devils Hole), suggesting that the delta(18)O of CC1 has responded to global-scale climate changes, whilst remarkable similarity exists between CC1 delta(18)O and regional sea-surface temperature reconstructions from North Atlantic core ODP980 and southwest Pacific marine core MD97-2120 through the most detailed part of the CC1 record, MIS 9-8. The results suggest that CC1 and other stalagmites from the cave have the potential to capture a long record of regional temperature trends, particularly in regards to the relative severity of Pleistocene glacial stages. (C) 2004 Elsevier B.V. All rights reserved.

Modellazione strutturale di edifici storici in muratura e misti: valutazioni comparate e criteri operativi

L’obiettivo della presente tesi è evidenziare l’importanza dell’approccio critico alla valutazione della vulnerabilità sismica di edifici in muratura e misti Il contributo della tesi sottolinea i diversi risultati ottenuti nella modellazione di tre edifici esistenti ed uno ipotetico usando due diversi programmi basati sul modello del telaio equivalente. La modellazione delle diverse ipotesi di vincolamento ed estensione delle zone rigide ha richiesto la formulazione di quattro modelli di calcolo in Aedes PCM ed un modello in 3muri. I dati ottenuti sono stati confrontati, inoltre, con l’analisi semplificata speditiva per la valutazione della vulnerabilità a scala territoriale prevista nelle “Linee Guida per la valutazione e riduzione del rischio sismico del Patrimonio Culturale”. Si può notare che i valori ottenuti sono piuttosto diversi e che la variabilità aumenta nel caso di edifici non regolari, inoltre le evidenze legate ai danni realmente rilevati sugli edifici mostrano un profondo iato tra la previsione di danno ottenuta tramite calcolatore e le lesioni rilevate; questo costituisce un campanello d’allarme nei confronti di un approccio acritico nei confronti del mero dato numerico ed un richiamo all’importanza del processo conoscitivo. I casi di studio analizzati sono stati scelti in funzione delle caratteristiche seguenti: il primo è una struttura semplice e simmetrica nelle due direzioni che ha avuto la funzione di permettere di testare in modo controllato le ipotesi di base. Gli altri sono edifici reali: il Padiglione Morselli è un edificio in muratura a pianta a forma di C, regolare in pianta ed in elevazione solamente per quanto concerne la direzione y: questo ha permesso di raffrontare il diverso comportamento dei modelli di calcolo nelle sue direzioni; il liceo Marconi è un edificio misto in cui elementi in conglomerato cementizio armato affiancano le pareti portanti in muratura, che presenta un piano di copertura piuttosto irregolare; il Corpo 4 dell’Ospedale di Castelfranco Emilia è un edificio in muratura, a pianta regolare che presenta le medesime irregolarità nel piano sommitale del precedente. I dati ottenuti hanno dimostrato un buon accordo per la quantificazione dell’indice di sicurezza per i modelli regolari e semplici con uno scarto di circa il 30% mentre il delta si incrementa per le strutture irregolari, in particolare quando le pareti portanti in muratura vengono sostituite da elementi puntuali nei piani di copertura arrivando a valori massimi del 60%. I confronti sono stati estesi per le tre strutture anche alla modellazione proposta dalle Linee Guida per la valutazione dell’indice di sicurezza sismica a scala territoriale LV1 mostrando differenze nell’ordine del 30% per il Padiglione Morselli e del 50% per il Liceo Marconi; il metodo semplificato risulta correttamente cautelativo. È, quindi, possibile affermare che tanto più gli edifici si mostrano regolari in riferimento a masse e rigidezze, tanto più la modellazione a telaio equivalente restituisce valori in accordo tra i programmi e di più immediata comprensione. Questa evidenza può essere estesa ad altri casi reali divenendo un vero e proprio criterio operativo che consiglia la suddivisione degli edifici esistenti in muratura, solitamente molto complessi poiché frutto di successive stratificazioni, in parti più semplici, ricorrendo alle informazioni acquisite attraverso il percorso della conoscenza che diviene in questo modo uno strumento utile e vitale. La complessità dell’edificato storico deve necessariamente essere approcciata in una maniera più semplice identificando sub unità regolari per percorso dei carichi, epoca e tecnologia costruttiva e comportamento strutturale dimostrato nel corso del tempo che siano più semplici da studiare. Una chiara comprensione del comportamento delle strutture permette di agire mediante interventi puntuali e meno invasivi, rispettosi dell’esistente riconducendo, ancora una volta, l’intervento di consolidamento ai principi propri del restauro che includono i principi di minimo intervento, di riconoscibilità dello stesso, di rispetto dei materiali esistenti e l’uso di nuovi compatibili con i precedenti. Il percorso della conoscenza diviene in questo modo la chiave per liberare la complessità degli edifici storici esistenti trasformando un mero tecnicismo in una concreta operazione culturale . Il presente percorso di dottorato è stato svolto in collaborazione tra l’Università di Parma, DICATeA e lo Studio di Ingegneria Melegari mediante un percorso di Apprendistato in Alta Formazione e Ricerca.

A COMUNICAÇÃO INTERPESSOAL COMO REGULADORA DA PERCEPÇÃO DA QUALIDADE DOS SERVIÇOS DE SAÚDE

Quem utiliza, hoje, os serviços de uma organização especializada na área da saúde, encontra pela frente profissionais que desenvolvem atividades assistenciais, cujo exercício está a exigir bem mais do que apenas competência técnica. São médicos, enfermeiros, psicólogos, fisioterapeutas, nutricionistas, terapeutas ocupacionais, assistentes sociais, entre outros, que, além das ações e procedimentos relacionados às suas áreas específicas de conhecimento, têm de estabelecer sempre, com as pessoas que atende, relações de caráter interpessoal. Existe literatura suficiente indicando haver considerável alívio por parte dos pacientes (clientes) e melhoria das condições do trabalho assistencial quando o profissional de saúde está apto a conhecer mais de perto os motivos para muitos dos comportamentos dos seus pacientes. Nessa perspectiva, uma interação para melhor compreender suas necessidades, angústias, raivas e expectativas é de fundamental importância. É também conhecido o fato de que muitas das reclamações e insatisfações dos serviços prestados nessas instituições poderiam ser evitados ou atenuados quando os pacientes se sentem compreendidos e respeitados pelos profissionais envolvidos no seu atendimento. A falta de acolhimento das demandas da clientela e a observação, por parte desta, de que os aspectos emocionais na relação com quem o assiste está sendo negligenciada pode conduzir este paciente, enquanto cliente, à conclusão de que o serviço prestado é de má qualidade. Este estudo terá por objetivo conhecer, dentro do fenômeno da comunicação interpessoal, as modalidades de interações sociais constituídas através dela à formação das exigências, expectativas e percepções desses atores sociais, além do entendimento de como se dá a relação entre paciente e atendente. Para isso, estudaremos os principais conceitos de serviços, qualidade e os fundamentos teóricos do modelo conceitual formulado por PARASURAMAN, ZEITHAML & BERRY e seus posteriores refinamentos , que resultaram na escala Servqual, cuja concepção determina que a qualidade dos serviços de qualquer natureza detectada por uma clientela, resulta do hiato entre as expectativas iniciais e a performance percebida do serviço. A escala Servqual se constituirá assim, no principal instrumento teórico a ser utilizado neste trabalho. Entendendo a sociedade de hoje como uma rede sistêmica, estudaremos, por fim, as lacunas entre as expectativas e percepções de uma clientela específica dos serviços oferecidos por uma empresa hospitalar especializada na área de maternidade. É uma pesquisa na qual se procurará determinar em que dimensões da qualidade a comunicação interpessoal apresenta maior influência, funcionando como um mecanismo regulador da percepção dos serviços prestados sob uma ótica qualitativa.

Beryllium, neodymium and metal composition of ODP Leg 194 sites and survey sites crusts

Be and Nd isotope compositions and metal concentrations (Mn, Fe, Co, Ni, and Cu) of surface and subsurface ferromanganese hardground crusts from Ocean Drilling Program Leg 194 Marion Plateau Sites 1194 and 1196 provide new insights into the crusts' genesis, growth rates, and ages. Metal compositions indicate that the hardgrounds, which have grown on erosional surfaces in water depths of <400 m because of strong bottom currents, are not pure hydrogenetic precipitates. Nevertheless, the ratios between cosmogenic 10Be and stable 9Be in hardgrounds from the present-day seafloor at Site 1196 between 1 x 10**-7 and 1.5 x 10**-7 are within the range of values expected for Pacific seawater, which shows that the hardgrounds recorded the isotope composition of ambient seawater. This is also confirmed by their Nd isotope composition (epsilon Nd between -3 and 0). The 10Be/9Be ratios in the up to 30-mm-thick and partly laminated hardgrounds do not show a decrease with depth, which suggests high growth rates on the present-day seafloor. The subsurface crust at Site 1194 (117 m below the seafloor) grew during a sedimentation hiatus, when bottom currents in the late Miocene prevented sediment accumulation on the carbonate platform during a sea level lowstand. The age of 8.65 ± 0.50 Ma for this crust obtained from 10Be-based dating agrees well with the combined seismostratigraphic and biostratigraphic evidence, which suggests an age for the hiatus between 7.7 and 11.8 Ma.

Análise estratigráfica de subsuperfície do Devoniano Inferior da Bacia do Rio do Peixe, Nordeste do Brasil

Subsurface stratigraphic analysis of Devonian strata from the Rio do Peixe Basin, newly recognized by palynological studies, has resulted in the identification of two new lithostratigraphic units assembled in the Santa Helena Group. The Pilões Formation, the lower unit, is composed mainly of dark mudstones and medium-tovery fine-grained sandstones, with minor conglomerates and breccias. The Triunfo Formation, the upper unit, comprises whitish grey, kaolinitic, coarse-grained to conglomeratic, cross stratified sandstones and conglomerates, with interbedded mudstones and fine-grained sandstones. These units were characterized using cores, sidewall and cuttings samples, conventional logs and image log, from three wells drilled by PETROBRAS, and 3D seismic data. The Pilões Formation is interpreted as prodeltaic facies, with lesser associated subaqueous talus, debrite and sandy turbidite lobe facies, distal part of fandelta and braided fluviodeltaic facies of Triunfo Formation. The Santa Helena Group corresponds to the Lower Devonian tectono-sequence deposited in a NW-SE-trending graben during a transgressiveregressive cycle. With 343 meters of thickness (isochore) in well 1-PIL-1-PB (Pilões 1), this sequence has a non-conformity at the lower boundary and its upper boundary is an unconformity with the Lower Cretaceous tectono-sequence (Rio do Peixe Group), that represents a hiatus of about 265 million years. Ignimbrites and coignimbrite breccias (Poço da Jurema volcanic breccia), related to an unknown pyroclastic volcanic event, were recognized at the northern margin of the Sousa halfgraben. Evidence from well data suggests that this event is coeval with the Devonian graben filling. The present study indicates a polyhistorical tectono-volcanosedimentary evolution of the basin. This lithostratigraphic update brings new perspectives for geological research in the Rio do Peixe Basin, as well as in other inland basins of the Northeastern of Brazil. The results of the research also contribute to the kwnoledge of the Borborema Province and western Gondwana paleogeography during the Early Devonian.

Role of metalliferous mudstones and graphitic shales in the location, genesis, and paleoenvironment

The Cambrian Tally Pond volcanic belt in central Newfoundland contains numerous volcanogenic massive sulphide (VMS) deposits, prospects, and showings that are locally associated with metalliferous mudstones and/or graphitic shales. Deposits in the belt are bimodal felsic-type VMS that are both base metal- (e.g., Duck Pond, Boundary) and precious metal-enriched (e.g., Lemarchant). At the Lemarchant deposit metalliferous mudstones are genetically and spatially associated with mineralization, whereas the relationship of other mudstones and shales to massive sulphide mineralization is more intricate and remains not fully understood. Metalliferous mudstones represent a hiatus in the volcanic activity where the deposition of hydrothermal products dominated over the abiogenic background sedimentation and/or dilution by volcaniclastic-epiclastic material. Lithogeochemical signatures allow one to distinguish between predominantly hydrothermally or detritally (i.e., non-hydrothermal) derived material. Metalliferous mudstones with a significant hydrothermal component, like those at Lemarchant, have elevated Fe/Al and base-metal contents, compared to detrital shales, and shale-normalized negative Ce and positive Eu anomalies, indicative of deposition from high temperature (>250°C) hydrothermal fluids within an oxygenated water column. Mudstones and shales sampled from other locations in the Tally Pond volcanic belt have more variable signatures ranging from hydrothermal (signatures as above) to non-hydrothermal (no positive Eu-anomalies, flat REE patterns), with some that have mixed (hydrothermal and detrital) signatures. Both S and Pb isotopic compositions indicate that proximal sulphides hosted in mudstones immediately associated with massive sulphide mineralization within the Lemarchant deposit contain a higher proportion of sulphur derived from hydrothermal sources and processes, and have more juvenile lead contributions, when compared to sulphides distal (not associated with massive sulphides) from mineralization. Lead and Nd isotopic compositions of both whole rock and minerals in the Lemarchant mudstones indicate involvement of underlying crustal basement during massive sulphide formation and throughout the evolution of the Tally Pond belt. Metalliferous mudstones precipitated early in the massive sulphide depositional history, but also have undergone syn- and post-ore-forming processes and have a larger lateral extent than the mineralization. Using lithogeochemistry, whole rock and in situ stable and radiogenic isotopes it is possible to distinguish prospective vent proximal (immediately associated with massive sulphide mineralization) from less prospective distal (not associated with massive sulphides) depositional environments and to reconstruct the paleotectonic setting on a deposit- to regional-scale for the Lemarchant deposit and other mudstone-associated prospects in the Tally Pond volcanic belt.

(Table 1) Radiocarbon ages and different calibrated ages for sediment core HLY0503-18TC obtained during the HOTRAX expedition

A short sediment core from a local depression forming an intra basin on the Lomonosov Ridge, was retrieved during the Healy-Oden Trans-Arctic Expedition 2005 (HOTRAX). It contains a record of the Marine Isotope Stages (MIS) 1-3 showing exceptionally high abundances of calcareous microfossils during parts of MIS 3. Based on radiocarbon dating, linear sedimentation rates of 7-9 cm/ka persist during the last deglaciation. The Last Glacial Maximum (LGM) is partly characterized by a hiatus. Planktic foraminiferal abundance variations of Neogloboquadrina pachyderma sinistral and calcareous nannofossils reflect changes in Arctic Ocean summer sea ice coverage and probably inflow of subpolar North Atlantic water. Calibration of the radiocarbon ages, using modeled reservoir corrections from previous studies and the microfossil abundance record of the studied core, results in marine reservoir ages of 1400 years or more, at least during the last deglaciation. Paired benthic-planktic radiocarbon dated foraminiferal samples indicate a slow decrease in age difference between surface and bottom waters from the Lateglacial to the Holocene, suggesting circulation and ventilation changes.