Cochineal, a precious source of red: cochineal dyes characterization by high performance liquid chromatography with diode array detection and principal component analysis

Presented at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

NAVA enhances tidal volume and diaphragmatic electro-myographic activity matching: a Range90 analysis of supply and demand.

Neurally adjusted ventilatory assist (NAVA) is a ventilation assist mode that delivers pressure in proportionality to electrical activity of the diaphragm (Eadi). Compared to pressure support ventilation (PS), it improves patient-ventilator synchrony and should allow a better expression of patient's intrinsic respiratory variability. We hypothesize that NAVA provides better matching in ventilator tidal volume (Vt) to patients inspiratory demand. 22 patients with acute respiratory failure, ventilated with PS were included in the study. A comparative study was carried out between PS and NAVA, with NAVA gain ensuring the same peak airway pressure as PS. Robust coefficients of variation (CVR) for Eadi and Vt were compared for each mode. The integral of Eadi (ʃEadi) was used to represent patient's inspiratory demand. To evaluate tidal volume and patient's demand matching, Range90 = 5-95 % range of the Vt/ʃEadi ratio was calculated, to normalize and compare differences in demand within and between patients and modes. In this study, peak Eadi and ʃEadi are correlated with median correlation of coefficients, R > 0.95. Median ʃEadi, Vt, neural inspiratory time (Ti_ ( Neural )), inspiratory time (Ti) and peak inspiratory pressure (PIP) were similar in PS and NAVA. However, it was found that individual patients have higher or smaller ʃEadi, Vt, Ti_ ( Neural ), Ti and PIP. CVR analysis showed greater Vt variability for NAVA (p < 0.005). Range90 was lower for NAVA than PS for 21 of 22 patients. NAVA provided better matching of Vt to ʃEadi for 21 of 22 patients, and provided greater variability Vt. These results were achieved regardless of differences in ventilatory demand (Eadi) between patients and modes.

Marital satisfaction: Psychometric properties of the PFB and comparison with the DAS

This study examines the French versions of two marital satisfaction scales: the Dyadic Adjustment Scale (DAS) and the Partnership Questionnaire (PFB). 127 couples, married or living together for at least 3 years, participated in this research and each partner responded individually to both scales. The analysis revealed high internal consistencies for both scales and most of the subscales. Concerning the DAS, the factorial structure did not replicate the theoretical structure. Moreover, the structure underlying this scale seems unstable across cultures. On the other hand, the structure of the PFB seems reliable and stable through cultures. The correlation between the DAS and the PFB is high (r=.80) and the three canonical correlation variates explain about 60% of the variance of both scales. Both scales are sensitive to demographic variables and couple characteristics. The agreement within couples is high. The PFB seems well suited to assess marital satisfaction for clinical and research purposes.

Outage probability analysis for MRC in η-μ fading channels with co-channel interference

Exact closed-form expressions are obtained for the outage probability of maximal ratio combining in η-μ fadingchannels with antenna correlation and co-channel interference. The scenario considered in this work assumes the joint presence of background white Gaussian noise and independent Rayleigh-faded interferers with arbitrary powers. Outage probability results are obtained through an appropriate generalization of the moment-generating function of theη-μ fading distribution, for which new closed-form expressions are provided.

Job satisfaction and life satisfaction: Analysis of a reciprocal model with social demographic moderators

The general objective of the study was to empirically test a reciprocal model of job satisfaction and life satisfaction while controlling for some social demographic variables. 827 employees working in 34 car dealerships in Northern Quebec (56% responses rate) were surveyed. The multiple item questionnaires were analysed using correlation analysis, chi square and ANOVAs. Results show interesting patterns emerging for the relationships between job and life satisfaction of which 49.2% of all individuals have spillover, 43.5% compensation, and 7.3% segmentation type of relationships. Results, nonetheless, are far richer and the model becomes much more refined when social demographic indicators are taken into account. Globally, social demographic variables demonstrate some effects on each satisfaction individually but also on the interrelation (nature of the relations) between life and work satisfaction.

La pertinence en science forensique. Une (en)quête épistémologique et empirique

A criminal investigation requires to search and to interpret vestiges of a criminal act that happened in a past time. The forensic investigator arises in this context as a critical reader of the investigation scene, in search of physical traces that should enable her to tell a story of the offence/crime which allegedly occurred. The challenge of any investigator is to detect and recognise relevant physical traces in order to provide forensic clues for investigation and intelligence purposes. Inspired by this obser- vation, the current research focuses on the following questions : What is a relevant physical trace? And, how does the forensic investigator know she is facing one ? The interest of such questions is to provide a definition of a dimension often used in forensic science but never studied in its implications and operations. This doctoral research investigates scientific paths that are not often explored in forensic science, by using semiotic and sociological tools combined with statistical data analysis. The results are shown following a semiotic path, strongly influenced by Peir- ce's studies, and a second track, called empirical, where investigations data were analysed and forensic investigators interviewed about their work practices in the field. By the semiotic track, a macroscopic view is given of a signification process running from the discove- red physical trace at the scene to what is evaluated as being relevant for the investigator. The physical trace is perceived in the form of several signs, whose meaning is culturally codified. The reasoning should consist of three main steps : 1- What kind of source does the discovered physical trace refer to ? 2- What cause/activity is at the origin of this source in the specific context of the case ? 3- What story can be told from these observations ? The stage 3 requires to reason in creating hypotheses that should explain the presence of the discovered trace coming from an activity ; the specific activity that is related to the investigated case. To validate this assumption, it would depend on their ability to respond to a rule of relevancy. The last step is the symbolisation of the relevancy. The rule would consist of two points : the recognition of the factual/circumstantial relevancy (Is the link between the trace and the case recognised with the formulated hypothesis ? ) and appropriate relevancy (What investment is required to collect and analyse the discovered trace considering the expected outcome at the investigation/intelligence level?). This process of meaning is based on observations and a conjectural reasoning subject to many influences. In this study, relevancy in forensic science is presented as a conventional dimension that is symbolised and conditioned by the context, the forensic investigator's practice and her workplace environment (culture of the place). In short, the current research states relevancy results of the interactions between parameters from situational, structural (or organisational) and individual orders. The detection, collection and analysis of relevant physical traces at scenes depends on the knowledge and culture mastered by the forensic investigator. In the study of the relation relevant trace-forensic investigator, this research introduces the KEE model as a conceptual map that illustrates three major areas of forensic knowledge and culture acquisition, involved in the research and evaluation of the relevant physical trace. Through the analysis of the investigation data and interviews, the relationship between those three parameters and the relevancy was highlighted. K, for knowing, embodies a rela- tionship to the immediate knowledge allowing to give an overview of the reality at a specific moment ; an important point since relevancy is signified in a context. E, for education, is considered through its relationship with relevancy via a culture that tends to become institutionalised ; it represents the theoretical knowledge. As for the parameter E, for experience, it exists in its relation to relevancy in the adjustments of the strategies of intervention (i.e a practical knowledge) of each practitioner having modulated her work in the light of success and setbacks case after case. The two E parameters constitute the library resources for the semiotic recognition process and the K parameter ensures the contextualisation required to set up the reasoning and to formulate explanatory hypotheses for the discovered physical traces, questioned in their relevancy. This research demonstrates that the relevancy is not absolute. It is temporal and contextual; it is a conventional and relative dimension that must be discussed. This is where the whole issue of the meaning of what is relevant to each stakeholder of the investigation process rests. By proposing a step by step approach to the meaning process from the physical trace to the forensic clue, this study aims to provide a more advanced understanding of the reasoning and its operation, in order to streng- then forensic investigators' training. This doctoral research presents a set of tools critical to both pedagogical and practical aspects for crime scene management while identifying key-influences with individual, structural and situational dimensions. - Une enquête criminelle consiste à rechercher et à faire parler les vestiges d'un acte incriminé passé. L'investigateur forensique se pose dans ce cadre comme un lecteur critique des lieux à la recherche de traces devant lui permettre de former son récit, soit l'histoire du délit/crime censé s'être produit. Le challenge de tout investigateur est de pouvoir détecter et reconnaître les traces dites pertinentes pour fournir des indices forensiques à buts d'enquête et de renseignement. Inspirée par un tel constat, la présente recherche pose au coeur de ses réflexions les questions suivantes : Qu'est-ce qu'une trace pertinente ? Et, comment fait le forensicien pour déterminer qu'il y fait face ? L'intérêt de tels questionnements se comprend dans la volonté de définir une dimension souvent utili- sée en science forensique, mais encore jamais étudiée dans ses implications et fonctionnements. Cette recherche se lance dans des voies d'étude encore peu explorées en usant d'outils sémiotiques et des pratiques d'enquêtes sociologiques combinés à des traitements statistiques de données. Les résultats sont représentés en suivant une piste sémiotique fortement influencée par les écrits de Peirce et une seconde piste dite empirique où des données d'interventions ont été analysées et des investigateurs forensiques interviewés sur leurs pratiques de travail sur le terrain. Par la piste sémiotique, une vision macroscopique du processus de signification de la trace en élément pertinent est représentée. La trace est perçue sous la forme de plusieurs signes dont la signification est codifiée culturellement. Le raisonnement se formaliserait en trois principales étapes : 1- Quel type de source évoque la trace détectée? 2- Quelle cause/activité est à l'origine de cette source dans le contexte précis du cas ? 3- Quelle histoire peut être racontée à partir de ces observations ? Cette dernière étape consiste à raisonner en créant des hypothèses devant expliquer la présence de la trace détectée suite à une activité posée comme étant en lien avec le cas investigué. Pour valider ces hypothèses, cela dépendrait de leur capacité à répondre à une règle, celle de la pertinence. Cette dernière étape consiste en la symbolisation de la pertinence. La règle se composerait de deux points : la reconnaissance de la pertinence factuelle (le lien entre la trace et le cas est-il reconnu dans l'hypothèse fournie?) et la pertinence appropriée (quel est l'investissement à fournir dans la collecte et l'exploitation de la trace pour le bénéfice attendu au niveau de l'investigation/renseignement?). Tout ce processus de signification se base sur des observations et un raisonnement conjectural soumis à de nombreuses influences. Dans cette étude, la pertinence en science forensique se formalise sous les traits d'une dimension conventionnelle, symbolisée, conditionnée par le contexte, la pratique de l'investigateur forensique et la culture du milieu ; en somme cette recherche avance que la pertinence est le fruit d'une interaction entre des paramètres d'ordre situationnel, structurel (ou organisationnel) et individuel. Garantir la détection, la collecte et l'exploitation des traces pertinentes sur les lieux dépend de la connaissance et d'une culture maîtrisées par le forensicien. Dans l'étude du rapport trace pertinente-investigateur forensique, la présente recherche pose le modèle SFE comme une carte conceptuelle illustrant trois grands axes d'acquisition de la connaissance et de la culture forensiques intervenant dans la recherche et l'évaluation de la trace pertinente. Par l'analyse des données d'in- terventions et des entretiens, le rapport entre ces trois paramètres et la pertinence a été mis en évidence. S, pour savoir, incarne un rapport à la connaissance immédiate pour se faire une représentation d'une réalité à un instant donné, un point important pour une pertinence qui se comprend dans un contexte. F, pour formation, se conçoit dans son rapport à la pertinence via cette culture qui tend à s'institutionnaliser (soit une connaissance théorique). Quant au paramètre E, pour expérience, il se comprend dans son rapport à la pertinence dans cet ajustement des stratégies d'intervention (soit une connaissance pratique) de chaque praticien ayant modulé leur travail au regard des succès et échecs enregistrés cas après cas. F et E formeraient la bibliothèque de ressources permettant le processus de reconnaissance sémiotique et S assurerait la contextualisation nécessaire pour poser le raisonnement et formuler les hypothèses explicatives pour les traces détectées et questionnées dans leur pertinence. Ce travail démontre que la pertinence n'est pas absolue. Elle est temporelle et contextuelle, c'est une dimension conventionnelle relative et interprétée qui se doit d'être discutée. C'est là que repose toute la problématique de la signification de ce qui est pertinent pour chaque participant du processus d'investigation. En proposant une lecture par étapes du processus de signification depuis la trace à l'indice, l'étude vise à offrir une compréhension plus poussée du raisonnement et de son fonctionnement pour renforcer la formation des intervenants forensiques. Cette recherche présente ainsi un ensemble d'outils critiques à portée tant pédagogiques que pratiques pour la gestion des lieux tout en identifiant des influences-clé jouées par des dimensions individuelles, structurelles et situationnelles.

Discriminating crop, weeds and soil surface with a terrestrial LIDAR sensor

In this study, the evaluation of the accuracy and performance of a light detection and ranging (LIDAR) sensor for vegetation using distance and reflection measurements aiming to detect and discriminate maize plants and weeds from soil surface was done. The study continues a previous work carried out in a maize field in Spain with a LIDAR sensor using exclusively one index, the height profile. The current system uses a combination of the two mentioned indexes. The experiment was carried out in a maize field at growth stage 12–14, at 16 different locations selected to represent the widest possible density of three weeds: Echinochloa crus-galli (L.) P.Beauv., Lamium purpureum L., Galium aparine L.and Veronica persica Poir.. A terrestrial LIDAR sensor was mounted on a tripod pointing to the inter-row area, with its horizontal axis and the field of view pointing vertically downwards to the ground, scanning a vertical plane with the potential presence of vegetation. Immediately after the LIDAR data acquisition (distances and reflection measurements), actual heights of plants were estimated using an appropriate methodology. For that purpose, digital images were taken of each sampled area. Data showed a high correlation between LIDAR measured height and actual plant heights (R2 = 0.75). Binary logistic regression between weed presence/absence and the sensor readings (LIDAR height and reflection values) was used to validate the accuracy of the sensor. This permitted the discrimination of vegetation from the ground with an accuracy of up to 95%. In addition, a Canonical Discrimination Analysis (CDA) was able to discriminate mostly between soil and vegetation and, to a far lesser extent, between crop and weeds. The studied methodology arises as a good system for weed detection, which in combination with other principles, such as vision-based technologies, could improve the efficiency and accuracy of herbicide spraying.

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf) were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC) are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp) has the potential to be used in indirect selection for total carotenoids.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Evaluation of empirical methods to estimate reference evapotranspiration in Uberaba, State of Minas Gerais, Brazil

Evapotranspiration is the process of water loss of vegetated soil due to evaporation and transpiration, and it may be estimated by various empirical methods. This study had the objective to carry out the evaluation of the performance of the following methods: Blaney-Criddle, Jensen-Haise, Linacre, Solar Radiation, Hargreaves-Samani, Makkink, Thornthwaite, Camargo, Priestley-Taylor and Original Penman in the estimation of the potential evapotranspiration when compared to the Penman-Monteith standard method (FAO56) to the climatic conditions of Uberaba, state of Minas Gerais, Brazil. A set of 21 years monthly data (1990 to 2010) was used, working with the climatic elements: temperature, relative humidity, wind speed and insolation. The empirical methods to estimate reference evapotranspiration were compared with the standard method using linear regression, simple statistical analysis, Willmott agreement index (d) and performance index (c). The methods Makkink and Camargo showed the best performance, with "c" values ​​of 0.75 and 0.66, respectively. The Hargreaves-Samani method presented a better linear relation with the standard method, with a correlation coefficient (r) of 0.88.

Development of a Chinese version WHO Self-Assessment Tool for Evaluating Health Promotion in Hospital

[Support Institutions:] Department of Administration of Health, University of Montreal, Canada Public Health School of Fudan University, Shanghai, China

Potential energy surface and MULTIMODE vibrational analysis of C2H3+

A full dimensional, ab initio-based semiglobal potential energy surface for C2H3+ is reported. The ab initio electronic energies for this molecule are calculated using the spin-restricted, coupled cluster method restricted to single and double excitations with triples corrections [RCCSD(T)]. The RCCSD(T) method is used with the correlation-consistent polarized valence triple-zeta basis augmented with diffuse functions (aug-cc-pVTZ). The ab initio potential energy surface is represented by a many-body (cluster) expansion, each term of which uses functions that are fully invariant under permutations of like nuclei. The fitted potential energy surface is validated by comparing normal mode frequencies at the global minimum and secondary minimum with previous and new direct ab initio frequencies. The potential surface is used in vibrational analysis using the "single-reference" and "reaction-path" versions of the code MULTIMODE. (c) 2006 American Institute of Physics.

Spatiotemporal behavior of the TIGGE medium-range ensemble forecasts

Using the recently-developed mean–variance of logarithms (MVL) diagram, together with the TIGGE archive of medium-range ensemble forecasts from nine different centres, an analysis is presented of the spatiotemporal dynamics of their perturbations, showing how the differences between models and perturbation techniques can explain the shape of their characteristic MVL curves. In particular, a divide is seen between ensembles based on singular vectors or empirical orthogonal functions, and those based on bred vector, Ensemble Transform with Rescaling or Ensemble Kalman Filter techniques. Consideration is also given to the use of the MVL diagram to compare the growth of perturbations within the ensemble with the growth of the forecast error, showing that there is a much closer correspondence for some models than others. Finally, the use of the MVL technique to assist in selecting models for inclusion in a multi-model ensemble is discussed, and an experiment suggested to test its potential in this context.

A study of the antioxidant capacity of oak wood used in wine ageing and the correlation with polyphenol composition

The antioxidant capacity of oak wood used in the ageing of wine was studied by four different methods: measurement of scavenging capacity against a given radical (ABTS, DPPH), oxygen radical absorbance capacity (ORAC) and the ferric reducing antioxidant power (FRAP). Although, the four methods tested gave comparable results for the antioxidant capacity measured in oak wood extracts, the ORAC method gave results with some differences from the other methods. Non-toasted oak wood samples displayed more antioxidant power than toasted ones due to differences in the polyphenol compositon. A correlation analysis revealed that ellagitannins were the compounds mainly responsible for the antioxidant capacity of oak wood. Some phenolic acids, mainly gallic acid, also showed a significant correlation with antioxidant capacity.

Process analysis of trauma-focused cognitive behavioural therapy for individuals with schizophrenia

Objective. Therapeutic alliance, modality, and ability to engage with the process of therapy have been the main focus of research into what makes psychotherapy successful. Individuals with complex trauma histories or schizophrenia are suggested to be more difficult to engage and may be less likely to benefit from therapy. This study aimed to track the in-session ‘process’ of working alliance and emotional processing of trauma memories for individuals with schizophrenia. Design. The study utilized session recordings from the treatment arm of an open randomized clinical trial investigating trauma-focused cognitive behavioural therapy (TF-CBT) for individuals with schizophrenia (N = 26). Method. Observer measures of working alliance, emotional processing, and affect arousal were rated at early and late phases of therapy. Correlation analysis was undertaken for process measures. Temporal analysis of expressed emotions was also reported. Results. Working alliance was established and maintained throughout the therapy; however, agreement on goals reduced at the late phase. The participants appeared to be able to engage in emotional processing, but not to the required level for successful cognitive restructuring. Conclusion. This study undertook novel exploration of process variables not usually explored in CBT. It is also the first study of process for TF-CBT with individuals with schizophrenia. This complex clinical sample showed no difficulty in engagement; however, they may not be able to fully undertake the cognitive–emotional demands of this type of therapy. Clinical and research implications and potential limitations of these methods are considered.