A STUDY OF A LANDSLIDE IN BIRMINGHAM, ALABAMA

In 1988 a landslide occurred at a construction site in Birmingham, Alabama in which a portion of the construction site required excavating a rock slope with a group of apartments that were located at the top of the slope. During construction, two separate landslides occurred causing one and half of the apartment buildings to collapse downslope. The slope failure was investigated by two firms. One firm investigated the site conditions and the second firm investigated the design of the cut slope. The main concerns in the investigation were (1) the lack of consideration for the existing joint system, (2) using averaged the strength parameters, (3) the possibility of damaging the slope with blasting, and (4) the potential that there were underground mines at the site. The Rocscience program RocPlane was used to model the in situ conditions and the excavation. The model showed that the joint system’s pore water pressure was most likely the main factor in the failure.

Glaciation in Montana

Glacial deposits are increasingly entering into consideration in engineering projects, soil surveys, ground-water supply, sources for industrial materials, and other economic enterprises. In the field of en­gineering, glacial deposits if present must be consider­ed in connection with reservoir sites, dam or bridge abutments, road building, and other types of construction work.

Combining Bottom-up and Top-down Generation of Interactive Knowledge Maps for Enterprise Search

Our research project develops an intranet search engine with concept- browsing functionality, where the user is able to navigate the conceptual level in an interactive, automatically generated knowledge map. This knowledge map visualizes tacit, implicit knowledge, extracted from the intranet, as a network of semantic concepts. Inductive and deductive methods are combined; a text ana- lytics engine extracts knowledge structures from data inductively, and the en- terprise ontology provides a backbone structure to the process deductively. In addition to performing conventional keyword search, the user can browse the semantic network of concepts and associations to find documents and data rec- ords. Also, the user can expand and edit the knowledge network directly. As a vision, we propose a knowledge-management system that provides concept- browsing, based on a knowledge warehouse layer on top of a heterogeneous knowledge base with various systems interfaces. Such a concept browser will empower knowledge workers to interact with knowledge structures.

Evaluation of leaders – does gender still matter?

Purpose: Leadership positions are still stereotyped as male, especially in male-dominated fields such as STEM. Therefore, women in such positions run the risk of being evaluated less favorably than men. Our study investigates how female and male leaders in existing teams (engineering project) are evaluated, and how these evaluations change over time. Design/Methodology: Participants worked in 45 teams to develop specific engineering projects. Evaluations of 45 leaders (33% women) by 258 team members (39% women) were analyzed, that is, leaders’ self-evaluation and their evaluation by team members. Results: Although female and male leaders did not differ in their self-evaluations at the beginning of the project, female leaders evaluated themselves better within time. However, team members evaluated female leaders better than male leaders at the beginning of the project. These gender differences disappeared over the time. Limitations: It should be replicated in a non-student sample. Implications: The results show that female leaders entering a male-dominated field (engineering) are evaluated better by team members than male leaders at the beginning of the team work, in line with the ‘shifting standard model’ (Biernat & Fuegen, 2001). While the initial impression formation of female and male leaders is influenced by category membership, its impact decreases over time as a consequence of individualization (Fiske & Neuberg, 1990); this results in similar evaluations over time. Originality: To our knowledge this is the first study to systematically test perceptions of change in the evaluation over time of female and male leaders in natural setting.

Improving Surveying Accuracy and Efficiency in Connecticut: An Accuracy Assessment of GEOID03 and GEOID09

Comparing published NAVD 88 Helmert orthometric heights of First-Order bench marks against GPS-determined orthometric heights showed that GEOID03 and GEOID09 perform at their reported accuracy in Connecticut. GPS-determined orthometric heights were determined by subtracting geoid undulations from ellipsoid heights obtained from a network least-squares adjustment of GPS occupations in 2007 and 2008. A total of 73 markers were occupied in these stability classes: 25 class A, 11 class B, 12 class C, 2 class D bench marks, and 23 temporary marks with transferred elevations. Adjusted ellipsoid heights were compared against OPUS as a check. We found that: the GPS-determined orthometric heights of stability class A markers and the transfers are statistically lower than their published values but just barely; stability class B, C and D markers are also statistically lower in a manner consistent with subsidence or settling; GEOID09 does not exhibit a statistically significant residual trend across Connecticut; and GEOID09 out-performed GEOID03. A "correction surface" is not recommended in spite of the geoid models being statistically different than the NAVD 88 heights because the uncertainties involved dominate the discrepancies. Instead, it is recommended that the vertical control network be re-observed.

Cálculo del valor ambiental de los jardines frontales urbanos : Mendoza (Argentina)

Los espacios verdes y, en general, la vegetación que cumple funciones estéticas y de protección ambiental son valorados, medidos y calculados por el área destinada al cultivo, en lugar de basar los cálculos en los elementos vegetales constitutivos. Esto significa una simplificación excesiva de la valoración de la vegetación (actual o proyectada) que no aporta criterios de cuantificación valorativa necesarios, actualmente, tanto para preservar vegetación existente como para políticas de desarrollo urbano y proyectos de ingeniería del mejoramiento ambiental. En el presente trabajo se propone aplicar a la valoración de los jardines frontales urbanos de la ciudad de Mendoza una metodología cuantitativa desarrollada por R. Codina et al., que se apoya en un concepto nuevo que es su influencia como mejoradores ambientales. La ecuación de cálculo se integra con índices de valoración como el Índice de Vegetación Ambientalmente Activa y el Índice Ambiental Urbanístico, que permiten cuantificar la importancia urbanística y ambiental de la vegetación. También se propone una base para implementar una política de incentivo de los jardines frontales mediante la disminución del avalúo valor terreno del impuesto inmobiliario, en una escala progresiva según el Índice Ambiental Urbanístico de cada propiedad, tendiente a la transformación de la ciudad en una ciudad-jardín, mejorando la calidad de vida y el atractivo turístico urbano.

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing.

A hands-on education project: antenna design for inter-CubeSat communications

CubeSat platforms have become a de facto standard for universities willing to initiate space-technology activities with students. These small satellite platforms ease the implementation of hands-on education projects and opening the apertures of new research areas. Moreover, due to the limited volume (a 10 cm cube) and power (1 W), the application of imaginative solutions is mandatory. This leads to new innovation processes in the course of CubeSat projects. In this paper, we present a hands-on education project the aim of which is the specification, design, building and measurement of an antenna for communication between nanosatellites and, in particular, CubeSats. The project lies within the framework of ETSIT-UPM innovative education activities in the area of space technology, where students play a leading role in real engineering projects.

BioMet®Tools: from modeling and simulation to product design and development

BioMet®Tools is a set of software applications developed for the biometrical characterization of voice in different fields as voice quality evaluation in laryngology, speech therapy and rehabilitation, education of the singing voice, forensic voice analysis in court, emotional detection in voice, secure access to facilities and services, etc. Initially it was conceived as plain research code to estimate the glottal source from voice and obtain the biomechanical parameters of the vocal folds from the spectral density of the estimate. This code grew to what is now the Glottex®Engine package (G®E). Further demands from users in medical and forensic fields instantiated the development of different Graphic User Interfaces (GUI’s) to encapsulate user interaction with the G®E. This required the personalized design of different GUI’s handling the same G®E. In this way development costs and time could be saved. The development model is described in detail leading to commercial production and distribution. Study cases from its application to the field of laryngology and speech therapy are given and discussed.

Benchmarking for stability evaluation of computer systems

In this paper we propose a new benchmark to drive making decisions in maintenance of computer systems. This benchmark is made from load average sample data. The main goal is to improve reliability and performance of a set of devices or components. In particular, the stability of the system is measured in terms of variability of the load. A forecast of the behavior of this stability is also proposal as part of the reporting benchmark. At the final stage, a more stable system is obtained and its global reliability and performance can be then evaluated by means of appropriate specifications.

Capacidades y potencialidades endógenas, de los centros y laboratorios de investigación y desarrollo tecnológico, en las áreas de materiales y mecánica de Ciudad Guayana, Venezuela

El Estado Bolívar cuenta con una superficie de 238.000 Kms2 se encuentra ubicado al sur-este de Venezuela y su capital es Ciudad Bolívar. La región se ha caracterizado a nivel mundial por poseer una gran riqueza que se manifiesta en las reservas de los principales recursos minerales tales como oro, diamante, manganeso, hierro y bauxita, estos dos últimos han permitido la instalación de empresas básicas para el desarrollo de la industria siderúrgica y del aluminio, ubicados en Ciudad Guayana, Además cuenta con el parque industrial metalmecánico más grande del país concentrando un gran numero de Pequeñas y Medianas Industrias (PYMIS). En tal sentido el sector productivo de Guayana no se ha desarrollado integralmente, debido a que no ha orientando sus esfuerzos, en desarrollar e innovar en nuevos productos o mejoras de procesos debido a la poca capacidad y baja inversión en Investigación y Desarrollo Tecnológico (I&DT), para transformar nuestras materias primas y generar productos competitivo con un alto valor agregado. El presente proyecto se planteo como objetivo principal Diseñar Estrategias para Desarrollar las Capacidades y Potencialidades Endógenas, de los Centros y Laboratorios de Investigación y Desarrollo, para la Vinculación y Fortalecimiento de las PYMIS de Manufacturas en las Áreas de Materiales y Mecánica.

Measuring dynamic effects on underpasses of high-speed railway lines

Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behaviour has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge in order to achieve safe and cost-effective structures. As ballast operations are a key life cycle cost, and excessive vibrations increase the need of ballast regulation in order to ensure track geometry, special attention is paid to accelerations, the values of which should be limited to avoid track instability according to Eurocode. In this paper, the data obtained during on site measurements on culverts belonging to a Spanish high-speed train line are presented. A set of six rectangular-shaped, closed-frame underpasses were monitored under traffic loading. Acceleration records at different points of the structures are presented and discussed. They reveal a non-uniform dynamic response of the roof-slab, with the highest observed values below the occupied track. Also, they indicate that the dynamic response is important up to frequencies higher than those usually observed for standard simply supported bridges. Finally, they are used to obtain a heuristic rule to estimate acceleration levels on the roof-slab.

International For-Profit Investments in Microfinance Institutions Equity

Purpose: The purpose of this document is to review the funding options for Microfinance Institutions (MFIs), define the size of the holdings of international investors in MFI equity and in particular the MFIs listed in stock exchanges, analyze the characteristics of these subset of the financial world and study the stock exchange evolution of some listed MFIs amid the financial crisis. Design/methodology/approach: Since academic literature on listed MFI equity is virtually inexistent, most of the information has been obtained from the World Bank, annual accounts of the listed MFIs, stock exchanges and from equity research documents. Findings and Originality/value: Microfinance Institutions share several common characteristics that make them a resilient business and the few MFIs that are listed in stock exchanges seem to have performed better in the financial crisis. Microfinance can be considered as one of the new frontiers of the expansion of the global banking industry. Practical implications: Presently, international for-profit investors have very few ways of investing in microfinance equity. Most of the equity of the MFI equity is funded locally or thanks to the local public sector. The stock exchange listing of the MFIs should drive MFIs towards a more professional management, more transparency and better governance. Social implications: Microfinance Institutions provide credit to microenterprises in poor countries that have no other alternative sources of external capital to expand its activity. If global investors could easily invest in the listed equity of the MFIs these institutions would expand its lending books and would improve its governance, part of the population living in poor areas or with lower income could ameliorate its standard of living. Originality/value: The number of Microfinance Institutions that are professionally run like commercial banks is still scarce and even more scarce are the MFI listed in public stock exchanges. Therefore the published literature on the characteristics and performance of the listed equity of the Microfinance Institutions is extremely reduced. But microfinance assets are rapidly growing and MFIs will need to list their equity in stock exchanges to sustain this expansion.

Modelado experimental de un sistema de e-Salud aplicado en cooperación al desarrollo

Los Objetivos de Desarrollo del Milenio comprometieron a los países con una nueva alianza mundial de alcanzar gradualmente una cobertura universal de los niveles mínimos de bienestar en los países en desarrollo (reducir la pobreza y el hambre y dar respuesta a problemas como la mala salud, las desigualdades de género, la falta de educación, el acceso a agua salubre y la degradación ambiental). Para dar continuidad a esta iniciativa, recientemente en septiembre de 2015, la ONU promulgó la declaración de los Objetivos de Desarrollo Sostenible. Los ODM sitúan la salud en el corazón del desarrollo y establecen un novedoso pacto mundial que vincula a los países desarrollados y los países en desarrollo por medio de obligaciones claras y recíprocas. En este sentido, diversos organismos de cooperación a través de sus programas de cooperación internacional, tratan de mejorar el acceso a la asistencia sanitaria, especialmente a la población vulnerable que vive en zonas rurales de países en desarrollo. Con el fin de ayudar a cumplir los ODM que apoyan los temas de salud en dicha población, estos organismos desarrollan proyectos que despliegan sistemas de e-salud. Las intervenciones se enfrentan a múltiples retos: condicionantes de los países en desarrollo, las necesidades y demandas de los sistemas sanitarios y la complejidad de implantar las TIC en entornos complejos y altamente dinámicos como son los países en desarrollo. Estos condicionantes ocasionan la mayoría de proyectos fallidos que terminan convirtiéndose en soluciones aisladas, que anteponen la tecnología a las necesidades de la población y no generan el impacto esperado en su desarrollo. En este contexto tuvo origen esta tesis doctoral, que persigue como objetivo analizar, planificar, diseñar, verificar y validar un marco arquitectónico de implantación de sistemas de e-salud en áreas rurales de países en desarrollo, que promueva el mejoramiento de la calidad de vida de la población vulnerable de estas regiones y la efectividad de las intervenciones de e-salud en el marco de proyectos de cooperación al desarrollo. Para lograrlo, tomé como punto de partida, diversas estrategias, modelos, metodologías de implantación de e-salud, modelos de gestión de proyectos propuestos por distintos organismos internacionales y propuse una instanciación de estos modelos a proyectos de implantación de sistemas de e-salud en países en desarrollo. Apliqué la metodología action research y los enfoques twin track, middle out y design thinking que me permitieron el refinamiento iterativo del modelo propuesto en la tesis doctoral mediante el trabajo de campo realizado en dos zonas rurales de países de Centroamérica: Jocotán (Guatemala) y San José de Cusmapa (Nicaragua). Como resultado obtuve un modelo experimental basado en cuatro componentes: un modelo de referencia tipo, un modelo conceptual de e-salud, los procesos de gestión y de implantación de sistemas de e-salud en países en desarrollo y una arquitectura de referencia. El modelo experimental resultante aporta herramientas importantes para el despliegue de sistemas de e-salud en países en desarrollo. Se ha propuesto un modelo de referencia que proporciona una visión holística del contexto del país en desarrollo donde se desarrollarán las intervenciones. Un modelo conceptual de e-salud que representa los principales conceptos involucrados en un sistema de e-salud. Los procesos ii- de gestión del proyecto y de implantación del sistema que proporcionan a los grupos de cooperación, herramientas para el análisis, diseño, desarrollo y despliegue de los sistemas de e-salud en áreas rurales de países en desarrollo. Y finalmente la arquitectura de referencia que sienta las bases para la aplicación de estos procesos a un contexto en particular. Las líneas futuras de trabajo sugieren extender el modelo a más casos de estudio que permitan su refinamiento y evaluar los futuros usos que pueden surgir de los sistemas de e-salud resultantes. ABSTRACT Millennium Development Goals (MDGs) committing the countries with a new global partnership to achieve universal coverage of minimum levels of well-being in Developing Countries (for addressing extreme poverty in its many dimensions-income poverty, hunger, disease, lack of adequate housing, and exclusion-while promoting gender equality, education, and environmental sustainability). From September 2015, these goals are replaces with Sustainable Development Goals (SDGs). The MDG place health at the heart of development and establish a novel global compact, linking developed and developing countries through clear, reciprocal obligations. Many public and private institutions promote international cooperation programs to support in achieving the MDGs. Some of these cooperation programs deal improving access to healthcare to poor people living in isolated areas from developing countries. In order to accomplish this goal organizations perform projects (interventions or cooperation projects) that deploy e-health systems in these zones. Nevertheless, this kind of projects face multiple challenges that dismiss the effectiveness of the projects results. In particular, cooperation teams face issues such as constraints in developing countries, lack of electrical and ICT infrastructure, scarce transport, extreme climate conditions, lack ICT capacity, lack of access to healthcare and inefficient delivery methods, etc. Hence, these issues increase the complexity of implementing e-health in developing countries and then causes the most projects fail. In other words, the solutions do not meet population needs and do not generate the expected impact on development. This context is the starting point of this doctoral thesis, which deals with analysing, planning, designing, testing and validating an architectural framework in order to implement e-health systems in rural areas from developing countries, promote development of the population in these regions, and thus improve the impact of interventions of development cooperation projects. To achieve this goal, I took as a starting point the strategies, models, e-health implementation methodologies and projects management models proposed by various international agencies. Then I proposed an instantiation of these models to manage the intervention and implement e-health systems in developing countries. I applied the action research methodology and the approaches twin track, middle out and design thinking which allowed me the iterative refinement of the model proposed in this doctoral thesis. The proposed framework was validated by running two cases studies in rural areas of Central America: Jocotán (Guatemala) and San José de Cusmapa (Nicaragua). As a result, I obtained an experimental model based on four components: a Type reference model, an e-health conceptual model, both process management and implementation e-health systems in developing countries and a reference architecture. The resulting experimental model provides important tools for the deployment of e-health systems in developing countries. The model become as reference model that provides a holistic view of the developing countries context where the interventions will be running. The conceptual model of e-health represents the main concepts involved into an e-health system. The project management and implementation processes of the iv- system provide to the cooperation teams with tools for analysing, designing, developing and deploying e-health systems in rural areas from developing countries. Finally, the reference architecture provides the basis for the implementation of these processes into a particular context. The future research suggest the extension the model to other cases studies in order to refine and evaluate the viability the model.

CytA enables CryIV endotoxins of Bacillus thuringiensis to overcome high levels of CryIV resistance in the mosquito, Culex quinquefasciatus

Cry proteins produced by Bacillus thuringiensis are selective biodegradable insecticides used increasingly in bacterial insecticides and transgenic plants as alternatives to synthetic chemical insecticides. However, the potential for development of resistance and cross-resistance in target insect populations to Cry proteins used alone or in combination threatens the more widespread use of this novel pest control technology. Here we show that high levels of resistance to CryIV proteins in larvae of the mosquito, Culex quinquefasciatus, can be suppressed or reduced markedly by combining these proteins with sublethal quantities of CytA, a cytolytic endotoxin of B. thuringiensis. Resistance at the LC95 level of 127-fold for a combination of three CryIV toxins (CryIVA, B, and D), resulting from 60 generations of continuous selection, was completely suppressed by combining sporulated powders of CytA in a 1:3 ratio with sporulated powders of a CryIVA, CryIVB, and CryIVD strain. Combining the CytA strain with a CryIVA and CryIVB strain also completely suppressed mosquito resistance of 217-fold to the latter toxins at the LC95 level, whereas combination of CytA with CryIVD reduced resistance in a CryIVD-selected mosquito strain from greater than 1,000-fold to less than 8-fold. The CytA/CryIV model provides a potential molecular genetic strategy for engineering resistance management for Cry proteins directly into bacterial insecticides and transgenic plants.