Análise de fragmentos arqueológicos: um diálogo entre a Química, Biologia e Arqueologia

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Desenvolvimento e validação de um método para a caracterização de vinhos por HPLC-DAD

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Characterization of late antique and early medieval pottery production of the city of Braga and its territory

The fundamental goal we set ourselves when developing this study is to try to characterize, both technically and formally, ceramics made in the city of Braga and its territory from the initial moments of the Late Antiquity to the Middle Ages. Thus, we will focus on analyzing some own productions that appear attached to the phases of late antique occupation —ceramics of red engobes and late gray—, as well as in the early medieval containers identified in different archaeological interventions practiced in the Braga environment. Concretely, we will analyze the material from various excavations conducted recently at the Theatre in the solar number 20/28 and 36/56 from the Afonso Henriques Street and the former District Hostel as well as the church of São Martinho de Dume.

Optimização do processo de recolha de resíduos: desenvolvimento de ferramentas de investigação operacional para o problema de orientação de equipas com multi-restrições

Tese de Doutoramento em Engenharia Industrial e de Sistemas.

Estudos sôbre o quiabeiro II: efeitos da autofecundação e do cruzamento

The present work deals with the study of the effects of selfing and crossing in pures lines of okra inbred for five generations and the methods of breeding in this plant. This work is party of a large program of this Dept. to study heterosis in plants naturally self pollinated. The technic of selfing consists of tying with a string the floral bud before anthesis. To make controlled crosses, it is necessary to emasculate the flowers removing the anthers with small forceps, and to cover the flowers with a bag and wait for 1 or 2 days until the blooming. Also, the male parents are covered with paper bags prior to flowering. Finally, the pollen is brushed lightly over the stigma of the emasculated flowers and the females unit rebagged. The authors have tried without sucess the technic of soda fountain straw used for cotton. The treatments were: I) Fl of the cross pure-line x foreign variety (not improved by breeding). II) Fl of the cross pure-line x parental variety and III) pure-line 5 generations inbred. In order to compare the production of these three treatments, a randomized blocks with 4 replications was designed; since we had 6 families in each treatment, the total number was: 4 replications x 3 treatments x 6 families: = 72. Each familiy was planted in lines of 10 plants. Owing to the design devised, the present experiment corresponds to a split-plot. The analysis of variance of the number and the weight of the pods is given in tables 2 and 4, and shows the following: 1) The production expressed in both numbers and weights of the cross, - pure lines x foreign variety - was statistically smaller than the others treatments, i, e., the cross of pure-lines x parental variety and the pure-lines; 2) The production of the treatments pure-lines x parental variety and selfed purelines was the same. It was proved that the selfing do not produce harmful effects in okra, it was benefical, since after 5 inbred generations the production was the same when compared with Fl of the parental variety. Also, the methods of pure-lines are indicated to improve varieties of okra.

Experimentos com os nematicidas D. D., E. D. B. e brometo de metilo no combate aos nematódeos causadores de galhas em raízes de plantas (Meloidogyne spp.)

Tomato roots heavily disfigured by root-knot nematodes were throughly mixed with soil. At various time intervals, samples were taken from the mixture and treated in closed containers by each of the folio wing nematicides: D.D., E.D.B. and M.B. The efficacy of the treatment was tested by setting indicator plants in the treated soil and by examining their roots for the presence of galls two months later. In other words, the ability of the three nematicides to penetrate nematode galls after various periods of rotting, which varied from 5 to 30 days was studied. The main conclusions drawn are as follows: a) no nematicide among the three listed above showed the ability for complete destruction of the nematodes protected inside the roots, for a number of small galls developed on the root system of the indicator plant in all treatments; b) smaller and less numerous galls were present on the roots of the indicator plants grown in soil treated after a rotting period of 30 days; c) however, the control obtained seems to be quite satisfactory economically, since the check plants grew poorly and have developed a very unhealthy root system. This is in accordance with STARK & LEAR (1947), LEAR (1951) and CICCARONE's (1951) statements. The results of the present experiments show again that awaiting for the rotting of galls of the root-knot nematodes is not indispensable for an economically convenient soil fumigation. Fields in which many fleshy infected roots from previous crops have been buried can be economically fumigated immediately, without any loss of time. Notwithstanding, when thick woody roots are present in the soil, the above statements may not hold true. This should constitute a new problem calling for further experiments. Another essay dealing with methyl bromide alone, consisted in treating cotton roots heavily disfigured by Meloidogyne incognita in a container (diameter = 28cm, height = 32 cm), which remained closed for five days. After the treatment, the roots were mixed with soil, in which tomato seedlings were planted. After a growing period of two months, the roots of the tomato plants were washed in running water and examined for the presence of galls. As an early infeccion was present in the root system of all plants, the inefficacy of the treatment has been proved.

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Imaturos de mosquito (Diptera, Culicidae) de áreas urbana e rural no norte do Estado do Paraná, Brasil

The results of larval collections of mosquitoes from artificial containers and natural breeding at urban and rural areas carried out at Sertaneja, northern State Paraná, Brazil, from February to April, 1995, are presented. Among the 4534 immature forms collected, belonging to 21 species or species-groups, the species with higher density were Aedes aegypti (Linnaeus, 1762), Aedes albopictus (Skuse, 1894), Culex quinquefasciatus Say, 1823 and Limatus durhami Theobald, 1901.

Testing of stair climbing point-of-choice prompts in Barcelona at an outdoor set of stairs and scalators on the Montjuïc site

Regular stair climbing has well-documented health dividends, such as increased fitness and strength, weight loss and reduced body fat, improved lipid profiles and reduced risk of osteoporosis. The general absence of barriers to participation makes stair climbing an ideal physical activity (PA) for health promotion. Studies in the US and the UK have consistently shown that interventions to increase the accumulation of lifestyle PA by climbing stairs rather than using the escalators are effective. However, there are no previous in Catalonia. This project tested one message for their ability to prompt travelers on the Montjuïc site to choose the stairs rather than the escalator when climbing up the Monjuïc hill. One standard message, " Take the stairs! 7 minutes of stair climbing a day protects your heart" provided a comparison with previous research done in the UK. Translated into Catalan and Spanish, it was presented on a poster positioned at the point of choice between the stairs and the escalator. The study used a quasi-experimental, interrupted time series design. Travelers, during several and specific hours on two days of the week, were coded for stair or escalator use, gender, age, ethnic status, presence of accompanying children or bags by one observer. Overall, the intervention resulted in a 81% increase in stair climbing. In the follow-up period without messages, stair climbing dropped out to baseline levels. This preliminary study showed a significant effect on stair use. However, caution is needed since results are based on a small sample and, only a low percentage of the sample took the stairs at baseline or the intervention phase . Future research on stair use in Catalonia should focus on using bigger samples, different sites (metro stations, airports, shopping centers, etc) , different messages and techniques to promote stair climbing.

Sistema de control remot d'una màquina de rajos X via web

El projecte desenvolupat té com a objectiu la millora en la gestió de la configuració de les màquines de rajos X de l'empresa Varpe. La principal funció d’aquestes màquines és la inspecció d'envasos de productes alimentaris, amb l'objectiu de detectar anomalies produïdes durant l'envasat. En l'actualitat la resolució d'incidències d'aquestes màquines requereix el desplaçament físic d'operaris a les localitzacions on estan situades les màquines. El projecte proporciona una nova forma de treball a partir de l'ús de bases de dades distribuïdes en les màquines de rajos X i que són gestionades per un servidor central. Entre d'altres, la principal avantatge d'aquesta gestió és que la reconfiguració i resolució d'indecències es pot realitzar fàcilment a través d'una aplicació web.

Estudi i implementació d'un arxivat de dades per a les plataformes SAP Enterprise 4.7 x 200 d'una gran empresa

En aquest projecte s'ha implementat un sistema de data archiving amb SAP-IXOS per a una empresa després que aquesta demanés consell a la nostra consultora per reduir espai en la base de dades, ja que només els quedava lliure un 14% de l'ocupació total, i d'aquesta forma millorar el rendiment del sistema. S'ha realitzat un estudi de la base de dades, ocupació en Mb i creixement mensual de les dades en les taules. S'han parametritzat objectes d'arxivat, creat i definits repositoris de contingut, fitxers lògics i s'han programat reports addicionals per arxivar les dades correctament. El resultat ha estat reduir la base de dades en un 22% sent posible l'entrada de noves dades obtenint una resposta més àgil del sistema.

Una arqueometria del canvi tecnològic: producció i consum d'àmfores durant el canvi d'era en la zona nord de la costa catalana

L’objectiu de la recerca és definir un marc teòric i metodològic per a l’estudi del canvi tecnològic en Arqueologia. Aquest model posa èmfasi en caracteritzar els compromisos que configuren una tecnologia i avaluar-los en funció dels factors de situació —tècnics, econòmics, polítics, socials i ideològics. S’ha aplicat aquest model a un cas d’estudi concret: la producció d’àmfores romanes durant el canvi d’Era en la província Tarraconensis. L’estudi tecnològic dels envasos s’ha realitzat mitjançant diverses tècniques analítiques: Fluorescència de raigs X (FRX), Difracció de raigs X (DRX), Microscòpia òptica (MO) i Microscòpia electrònica de rastreig (MER). Les dades obtingudes permeten, a més, establir els grups de referència per a cada centre productor d’àmfores i, així, identificar la provinença dels individus recuperats en els centres consumidors. Donat que les àmfores en estudi són artefactes dissenyats específicament per a ser estibats en una nau i servir com a envàs de transport, l’estudi inclou la caracterització de les propietats mecàniques de resistència a la fractura i de tenacitat. En aquest sentit, i per primera vegada, s’ha aplicat l’Anàlisi d’Elements Finits (AEF) per a conèixer el comportament dels diferents dissenys d’àmfora en ésser sotmesos a diverses forces d’ús. L’AEF permet simular per ordinador les activitats en què les àmfores haurien participat durant el seu ús i avaluar-ne el seu comportament tècnic. Els resultats mostren una gran adequació entre les formulacions teòriques i el programa analític implementat per a aquest estudi. Respecte el cas d’estudi, els resultats mostren una gran variabilitat en les eleccions tecnològiques preses pels ceramistes de diferents tallers, però també al llarg del període de funcionament d’un mateix taller. L’aplicació del model ha permès proposar una explicació al canvi de disseny de les àmfores romanes.

Scheduling of straddle carriers in a container terminal

Report for the scientific sojourn at the University of California at Berkeley between September 2007 to February 2008. The globalization combined with the success of containerization has brought about tremendous increases in the transportation of containers across the world. This leads to an increasing size of container ships which causes higher demands on seaport container terminals and their equipment. In this situation, the success of container terminals resides in a fast transhipment process with reduced costs. For these reasons it is necessary to optimize the terminal’s processes. There are three main logistic processes in a seaport container terminal: loading and unloading of containerships, storage, and reception/deliver of containers from/to the hinterland. Moreover there is an additional process that ensures the interconnection between previous logistic activities: the internal transport subsystem. The aim of this paper is to optimize the internal transport cycle in a marine container terminal managed by straddle carriers, one of the most used container transfer technologies. Three sub-systems are analyzed in detail: the landside transportation, the storage of containers in the yard, and the quayside transportation. The conflicts and decisions that arise from these three subsystems are analytically investigated, and optimization algorithms are proposed. Moreover, simulation has been applied to TCB (Barcelona Container Terminal) to test these algorithms and compare different straddle carrier’s operation strategies, such as single cycle versus double cycle, and different sizes of the handling equipment fleet. The simulation model is explained in detail and the main decision-making algorithms from the model are presented and formulated.

Child sun protection in New Zealand: parental view and societal responsibilities

Issue addressed: Cutaneous melanoma is a significant health problem in New Zealand. Excessive sun exposure in early life increases subsequent risk. This study investigated parental opinions, understanding and practices concerning the sun protection of young children. The study aimed to identify areas where improvements in sun protection may be most needed. Methods: Parents were recruited through licensed childcare centres and kindergartens in Dunedin to take part in semi-structured focus groups. Feedback was obtained from participants in response to summary reports based on audiotapes. Results: Parents noted increased social acceptability of sun protective behaviours and child sunburn was now unacceptable. Past media campaigns were well recalled. The 'time to burn' used in media weather reports was easier to understand than the Ultra Violet Index (UVI), about which more information was wanted. Protective messages were expected to be straightforward, consistent and readily and regularly available. Local radio may provide the most timely, relevant information. There was a perceived lack of authoritative information about sunscreens and sunglasses and a shortage of acceptable protective clothing. Fuller information on sunscreen containers and greater use of UV Protection Factor (UPF) ratings for clothing and Eye Protection Factor (EPF) for sunglasses would assist. The use of shade and rescheduling of activities were scarcely mentioned. Conclusions: Parents were aware of the need for child sun protection but lacked confidence about how best to achieve this. Future health promotion programs should emphasise how optimal protection can be achieved more than why sun protection is needed. Programs should include a repertoire of strategies targeted towards individuals through the education of children and caregivers. They should also aim at achieving modifications in physical and social environments, including appropriate product design and promotion. So what?: The development of a balanced, comprehensive program with environmental components that reinforce protective behaviours has the potential to sustain sun protection among the largest number of children in the longer term.

L'ampolla sostenible

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. El treball consisteix en una recerca per aconseguir dissenyar l'ampolla més sostenible i ecoeficient possible. A partir d'una prèvia investigació sobre informació bàsica pel disseny, s'han anat augmentant els coneixements sobre envasos plàstics gràcies a consells com els d'un dissenyador d'envasos i d'una empresa que treballa amb plàstics, als resultats d'una enquesta als consumidors d'ampolles i a les conclusions d'un estudi de mercat sobre les ampolles de plàstic. L'ampolla sostenible dissenyada és el resultat d'aquest intens treball, que s'ha basat sobretot en la imaginació i en la creació.