High-Speed Semiconductor Lasers based on Low-Dimensional Active Materials for Optical Telecommunication

The scope of this work is the fundamental growth, tailoring and characterization of self-organized indium arsenide quantum dots (QDs) and their exploitation as active region for diode lasers emitting in the 1.55 µm range. This wavelength regime is especially interesting for long-haul telecommunications as optical fibers made from silica glass have the lowest optical absorption. Molecular Beam Epitaxy is utilized as fabrication technique for the quantum dots and laser structures. The results presented in this thesis depict the first experimental work for which this reactor was used at the University of Kassel. Most research in the field of self-organized quantum dots has been conducted in the InAs/GaAs material system. It can be seen as the model system of self-organized quantum dots, but is not suitable for the targeted emission wavelength. Light emission from this system at 1.55 µm is hard to accomplish. To stay as close as possible to existing processing technology, the In(AlGa)As/InP (100) material system is deployed. Depending on the epitaxial growth technique and growth parameters this system has the drawback of producing a wide range of nano species besides quantum dots. Best known are the elongated quantum dashes (QDash). Such structures are preferentially formed, if InAs is deposited on InP. This is related to the low lattice-mismatch of 3.2 %, which is less than half of the value in the InAs/GaAs system. The task of creating round-shaped and uniform QDs is rendered more complex considering exchange effects of arsenic and phosphorus as well as anisotropic effects on the surface that do not need to be dealt with in the InAs/GaAs case. While QDash structures haven been studied fundamentally as well as in laser structures, they do not represent the theoretical ideal case of a zero-dimensional material. Creating round-shaped quantum dots on the InP(100) substrate remains a challenging task. Details of the self-organization process are still unknown and the formation of the QDs is not fully understood yet. In the course of the experimental work a novel growth concept was discovered and analyzed that eases the fabrication of QDs. It is based on different crystal growth and ad-atom diffusion processes under supply of different modifications of the arsenic atmosphere in the MBE reactor. The reactor is equipped with special valved cracking effusion cells for arsenic and phosphorus. It represents an all-solid source configuration that does not rely on toxic gas supply. The cracking effusion cell are able to create different species of arsenic and phosphorus. This constitutes the basis of the growth concept. With this method round-shaped QD ensembles with superior optical properties and record-low photoluminescence linewidth were achieved. By systematically varying the growth parameters and working out a detailed analysis of the experimental data a range of parameter values, for which the formation of QDs is favored, was found. A qualitative explanation of the formation characteristics based on the surface migration of In ad-atoms is developed. Such tailored QDs are finally implemented as active region in a self-designed diode laser structure. A basic characterization of the static and temperature-dependent properties was carried out. The QD lasers exceed a reference quantum well laser in terms of inversion conditions and temperature-dependent characteristics. Pulsed output powers of several hundred milli watt were measured at room temperature. In particular, the lasers feature a high modal gain that even allowed cw-emission at room temperature of a processed ridge wave guide device as short as 340 µm with output powers of 17 mW. Modulation experiments performed at the Israel Institute of Technology (Technion) showed a complex behavior of the QDs in the laser cavity. Despite the fact that the laser structure is not fully optimized for a high-speed device, data transmission capabilities of 15 Gb/s combined with low noise were achieved. To the best of the author`s knowledge, this renders the lasers the fastest QD devices operating at 1.55 µm. The thesis starts with an introductory chapter that pronounces the advantages of optical fiber communication in general. Chapter 2 will introduce the fundamental knowledge that is necessary to understand the importance of the active region`s dimensions for the performance of a diode laser. The novel growth concept and its experimental analysis are presented in chapter 3. Chapter 4 finally contains the work on diode lasers.

Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

1.55 µm High-Speed QDs Lasers for Optical Telecommunication Applications

In this work investigation of the QDs formation and the fabrication of QD based semiconductor lasers for telecom applications are presented. InAs QDs grown on AlGaInAs lattice matched to InP substrates are used to fabricate lasers operating at 1.55 µm, which is the central wavelength for far distance data transmission. This wavelength is used due to its minimum attenuation in standard glass fibers. The incorporation of QDs in this material system is more complicated in comparison to InAs QDs in the GaAs system. Due to smaller lattice mismatch the formation of circular QDs, elongated QDs and quantum wires is possible. The influence of the different growth conditions, such as the growth temperature, beam equivalent pressure, amount of deposited material on the formation of the QDs is investigated. It was already demonstrated that the formation process of QDs can be changed by the arsenic species. The formation of more round shaped QDs was observed during the growth of QDs with As2, while for As4 dash-like QDs. In this work only As2 was used for the QD growth. Different growth parameters were investigated to optimize the optical properties, like photoluminescence linewidth, and to implement those QD ensembles into laser structures as active medium. By the implementation of those QDs into laser structures a full width at half maximum (FWHM) of 30 meV was achieved. Another part of the research includes the investigation of the influence of the layer design of lasers on its lasing properties. QD lasers were demonstrated with a modal gain of more than 10 cm-1 per QD layer. Another achievement is the large signal modulation with a maximum data rate of 15 Gbit/s. The implementation of optimized QDs in the laser structure allows to increase the modal gain up to 12 cm-1 per QD layer. A reduction of the waveguide layer thickness leads to a shorter transport time of the carriers into the active region and as a result a data rate up to 22 Gbit/s was achieved, which is so far the highest digital modulation rate obtained with any 1.55 µm QD laser. The implementation of etch stop layers into the laser structure provide the possibility to fabricate feedback gratings with well defined geometries for the realization of DFB lasers. These DFB lasers were fabricated by using a combination of dry and wet etching. Single mode operation at 1.55 µm with a high side mode suppression ratio of 50 dB was achieved.

Financial Information Mediation: A Case Study of Standards Integration for Electronic Bill Presentment and Payment Using the COIN Mediation Technology

Each player in the financial industry, each bank, stock exchange, government agency, or insurance company operates its own financial information system or systems. By its very nature, financial information, like the money that it represents, changes hands. Therefore the interoperation of financial information systems is the cornerstone of the financial services they support. E-services frameworks such as web services are an unprecedented opportunity for the flexible interoperation of financial systems. Naturally the critical economic role and the complexity of financial information led to the development of various standards. Yet standards alone are not the panacea: different groups of players use different standards or different interpretations of the same standard. We believe that the solution lies in the convergence of flexible E-services such as web-services and semantically rich meta-data as promised by the semantic Web; then a mediation architecture can be used for the documentation, identification, and resolution of semantic conflicts arising from the interoperation of heterogeneous financial services. In this paper we illustrate the nature of the problem in the Electronic Bill Presentment and Payment (EBPP) industry and the viability of the solution we propose. We describe and analyze the integration of services using four different formats: the IFX, OFX and SWIFT standards, and an example proprietary format. To accomplish this integration we use the COntext INterchange (COIN) framework. The COIN architecture leverages a model of sources and receivers’ contexts in reference to a rich domain model or ontology for the description and resolution of semantic heterogeneity.

Sistema multimodal para la planificación de viajes en transportes públicos de código abierto y basado en estándares 'de facto' = A multimodal journey planner based on open source software and 'de facto' standards

Este artículo muestra cómo con bajo coste y riesgo se puede desarrollar un sistema de planificación de viaje multimodal, basado en un enfoque de código abierto y estándares ‘de facto’. Se ha desarrollado completamente una solución de código abierto para un sistema de información de transporte público puerta a puerta basado en estándares ‘de facto’. El cálculo de rutas se realiza mediante Graphserver, mientras que la cartografía se basa en OpenStreetMap. También se ha demostrado cómo exportar una base de datos real de horarios de transporte público como la del operador ETM (Empresa de Transporte Metropolitano de València) a la especificación de Google Transit, para permitir el cálculo de rutas, tanto desde nuestro prototipo como desde Google Transit

Inputs for the incorporation of the UNESCO guidelines on ICT competency standards for teachers : the training of teachers of mathematics in Central America

Resumen tomado de la publicaci??n

The UK Professional Standards Framework: applying it to support for international students

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The UK Professional Standards Framework: applying it to support for international students

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The UK Professional Standards Framework for teaching and supporting learning in higher education

The UK Professional Standards Framework (UK PSF) for teaching and supporting learning, launched in February 2006, is a flexible framework which uses a descriptor-based approach to professional standards. There are three standard descriptors each of which is applicable to a number of staff roles and to different career stages of those engaged in teaching and supporting learning. The standard descriptors are underpinned by areas of professional activity, core knowledge and professional values. The framework provides a reference point for institutions and individuals as well as supporting ongoing development within any one standard descriptor.

Linking the UK Professional Standards Framework to reflective practice and action research

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The UK Professional Standards Framework: applying it to support for international students

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The UK Professional Standards Framework: applying it to support for international students

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The UK Professional Standards Framework for teaching and supporting learning in higher education

This is a part of a collection of materials developed by the HEAcademy Subject Centre for Languages, linguistics and area studies. The materials provide reflective activities designed to engage teachers with some of the key issues in working with international students and practical ideas for ways in which these can be addressed. They will be of particular interest to new staff or anyone new to working with international students.

The ISSA Pedagogical Standards: a tool to influence quality in early childhood programs

The ISSA Pedagogical Standards were first published in 2001 as a network-developed tool that defined quality in teaching practices and the classroom environment and captured the changes that had occurred in the region since 1994 when the Step by Step Program, an initiative to promote democratic principles in early childhood development and education, was launched. The Program was built on belief that each child has the right to receive maximum support for the development of his or her full potential, and this work should be done in partnership and close cooperation with families, communities and professionals

Learning Objects, Interoperability and Standards

An introduction/overview to the whole issue of learning objects, interoperability and IMS specifications in Learning Technology