Prevalence of fibromyalgia and chronic widespread pain in community-dwelling elderly subjects living in Sao Paulo, Brazil

Objectives: To estimate the prevalence of fibromyalgia (FM) and chronic widespread pain (CWP) in community-dwelling elderly individuals living in Sao Paulo, to assess the spectrum of problems related to these diseases using the Fibromyalgia Impact Questionnaire (FIQ) and to correlate the FIQ with the number of tender points and with pain threshold. Methods: Our sample consisted of 361 individuals (64% women, 36% men, mean age of 73.3 +/- 5.7 years). Individuals were classified into four groups: FM (according to American College of Rheumatology criteria), CWP, regional pain (RP) and no pain (NP). Pain characteristics and dolorimetry for 18 tender points and the FIQ were assessed. Results: The prevalence of FM was 5.5% [95% confidence interval (CI) = 5.4-5.7], and the prevalence of CWP was 14.1% (95% Cl: 10.5-17.7%). The frequency of RP was 52.6% and the prevalence of NP was 27.7%. FIQ scores were higher in people with FM (44.5), followed by CWP (31.4), RP (18.1) and NP (5.5) (p < 0.001). There was a positive correlation between the domains of the FIQ and the number of tender Points (p < 0.05), and a negative correlation between FIQ score and pain threshold (p < 0.05). Conclusion: In our elderly subjects, the prevalence of FM was slightly higher compared to previously reported studies, and CWP was around 14%. The spectrum of problems related to chronic pain was more severe in FM followed by CWP, strongly suggesting that these conditions should be diagnosed and adequately treated in older individuals. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

Molecular Sieve Silica Membranes

The Encyclopedia of Nanoscience and NanotechnologyTM is the world's first encyclopedia ever published in the field of nanotechnology. The 10-volume Encyclopedia is an unprecedented single reference source that provides an ideal introduction and overview of recent advances and emerging new aspects of nanotechnology, spanning from science to engineering to medicine. Although there are many books/handbooks and journals focused on nanotechnology, no encyclopedic reference work has been published as of today. The Encyclopedia fills this gap to provide basic information on all fundamental and applied aspects of nanotechnology by drawing on two decades of pioneering research. It is the only scientific work of its kind since the beginning of the field of nanotechnology, bringing together core knowledge and the very latest advances. About 400 review chapters and hundreds of entries written by over 1,000 of the world's leading scientists. It is written for all audience levels, allowing non-scientists to understand the nanotechnology while providing up-to-date information to active scientists and experts in the field. This outstanding encyclopedia is an indispensable source for research professionals, technology investors and developers seeking the most up-to-date information on nanotechnology, among a wide range of disciplines, from science to engineering to medicine.

Characterisation of templated xerogels for molecular sieve application

This paper presents the results of the characterisation of templated silica xerogels as precursor material for molecular sieve silica membranes for gas separation. The template agent integrated in the xerogel matrix is a methyl ligand covalently bended to the siloxane network in the form of methyltriethoxysilane (MTES). Several surface and microstructural characterisation techniques such as TGA, FTIR, NMR, and nitrogen adsorption have been employed to obtain information on the reaction mechanisms involved in the sol-gel processing of such molecular sieves. The characterisation results show the effects of processing parameters such as heat treatment temperature, and the concentration of the covalently bonded template on the development of the pore structure. It was found that calcination temperature significantly enhanced the condensation reactions thus resulted in more Si-O-Si groups being formed. This was also confirmed with the data of FTIR characterisation showing enhanced silicon bands at higher heat treatment temperatures. As a result of the promoted densification and shrinkable pore network the micropore volume also reduced with increasing methyl ligand molar ratio. However, the mean pore diameter does not change significantly with calcination temperature. While the contribution of the templates towards controlling pore size is less precise, increasing the methyl ligand molar ratio results in the broadening of the pore size distribution and lower pore volume. Higher template concentration induces the collapse of the xerogel matrix due to capillary stress promoting dense xerogels with low pore volume (C) 2001 Elsevier Science B.V. All rights reserved.

Segregation in binary and ternary liquid fluidized beds

The mechanism underlying segregation in liquid fluidized beds is investigated in this paper, A binary fluidized bed system not at a stable equilibrium condition. is modelled in the literature as forming a mixed part-corresponding to stable mixture-at the bottom of the bed and a pure layer of excess components always floating on the mixed part. On the basis of this model: (0 comprehensive criteria for binary particles of any type to mix/segregate, and (ii) mixing, segregation regime map in terms of size ratio and density ratio of the particles for a given fluidizing medium, are established in this work. Therefore, knowing the properties of given particles, a second type of particles can be chosen in order to avoid or to promote segregation according to the particular process requirements. The model is then advanced for multicomponent fluidized beds and validated against experimental results observed for ternary fluidized beds. (C) 2002 Elsevier Science B.V. All rights reserved.

The effect of latent heat of fusion on heat transfer in fluidized-bed coating of thin plates

This paper presents a numerical study of fluidized-bed coating on thin plates using an orthogonal collocation technique. Inclusion of the latent heat of fusion term in the boundary conditions of the mathematical model accounts for the fact that some polymer powders used in coating may be partially crystalline. Predictions of coating thickness on flat plates were made with actual polymers used in fluidized-bed coating. Reasonably good agreement between numerical predictions of the coating thickness and experimental coating data of Richart was obtained for steel panels preheated to 316 degreesC. A good agreement was also obtained between numerical predictions and our coating thickness data for nylon-11 and polyethylene powders. Predicted coating thickness for polyethylene powder on flat plates were obtained with values of heat transfer coefficient closer to those obtained from our experiments. (C) 2002 Elsevier Science B.V. All rights reserved.

Novel molecular sieve silica (MSS) membranes: characterisation and permeation of single-step and two-step sol-gel membranes

High quality MSS membranes were synthesised by a single-step and two-step catalysed hydrolyses employing tetraethylorthosilicate (TEOS), absolute ethanol (EtOH), I M nitric acid (HNO3) and distilled water (H2O). The Si-29 NMR results showed that the two-step xerogels consistently had more contribution of silanol groups (Q(3) and Q(2)) than the single-step xerogel. According to the fractal theory, high contribution of Q(2) and Q(3) species are responsible for the formation of weakly branched systems leading to low pore volume of microporous dimension. The transport of diffusing gases in these membranes is shown to be activated as the permeance increased with temperature. Albeit the permeance of He for both single-step and two-step membranes are very similar, the two-step membranes permselectivity (ideal separation factor) for He/CO2 (69-319) and He/CH4 (585-958) are one to two orders of magnitude higher than the single-step membranes results of 2-7 and 69, respectively. The two-step membranes have high activation energy for He and H-2 permeance, in excess of 16 kJ mol(-1). The mobility energy for He permeance is three to six-fold higher for the two-step than the single-step membranes. As the mobility energy is higher for small pores than large pores and coupled with the permselectivity results, the two-step catalysed hydrolysis sol-gel process resulted in the formation of pore sizes in the region of 3 Angstrom while the single-step process tended to produce slightly larger pores. (C) 2002 Elsevier Science B.V. All rights reserved.

Contaminación por compuestos organoclorados en algunos alimentos procedentes de una región de México

Fueran determinados los residuos de plaguicidas organoclorados en huevos y quesos de la población agricola de la Villa de Ahorne, Sinaloa, México, mediante cromatografia gas-líquido con detector de captura de eletrones. En los huevos, los compuestos detectados con mayor frecuencia y concentración fueran: epóxido de heptacloro, p, p'-DDT e p, p'-DDE. Simultáneamente fué realizado en la Villa de Ahorne un estudio epidemiológico preliminar en la cual se detectó varias manifestaciones patológicas en las personas entrevistadas y en sus familiares.

Los usuarios ante los alimentos genéticamente modificados y su información en el etiquetado

OBJETIVO : Analizar la opinión que los usuarios tienen sobre alimentos genéticamente modificados y su información en el etiquetado. MÉTODOS : Realizada revisión sistemática de la literatura científica sobre los alimentos transgénicos y el etiquetado a partir de la consulta de las bases de datos bibliográficas: Medline (vía PubMed), EMBASE, ISI-Web of Knowledge, Cochrane Library Plus, FSTA, LILACS, CINAHL y AGRICOLA. Los descriptores seleccionados fueron: «organisms, genetically modified » y «food labeling». La búsqueda se realizó desde la primera fecha disponible hasta junio de 2012, seleccionando los artículos pertinentes escritos en inglés, portugués y castellano. RESULTADOS : Se seleccionaron 40 artículos. En todos ellos, se debía haber realizado una intervención poblacional enfocada al conocimiento de los consumidores sobre los alimentos genéticamente modificados y su necesidad, o no, de incluir información en el etiquetado. El consumidor expresa su preferencia por el producto no-genéticamente modificado, y apunta que está dispuesto a pagar algo más por él, pero, en definitiva compra el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías. En 18 artículos la población se mostraba favorable a su etiquetado obligatorio y seis al etiquetado voluntario; siete trabajos demostraban el poco conocimiento de la población sobre los transgénicos y, en tres, la población subestimó la cantidad que consumía. En todo caso, se observó la influencia del precio del producto genéticamente modificado. CONCLUSIONES : La etiqueta debe ser homogénea y aclarar el grado de tolerancia en humanos de alimentos genéticamente modificados en comparación con los no modificados. Asimismo, debe dejar claro su composición, o no, de alimento genéticamente modificado y la forma de producción de estos artículos de consumo. La etiqueta también debe ir acompañada de un sello de certificación de una agencia del estado y datos para contacto. El consumidor expresa su preferencia por el producto no-genéticamente modificado pero señaló que acaba comprando el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías.

Plano de negócios para a reestruturação da subsecção de bar da Cooperativa Agrícola de Vila do Conde, CRL

Projeto apresentado ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo de Gestão de Empresas Orientação Científica: Professor Doutor Eduardo de Sá e Silva | Doutora Fátima Monteiro Orientação Técnica: Dr. Paulo Costa

Die wechselseitige Beziehung zwischen Sport und Medien

[s.c.]

Absorção, concentração e exportação de nutrientes por duas linhagens de colza (Brassica napus) em função da idade. I - macronutrientes

Com o objetivo de se estudar a marcha da absorção de macronutrientes pela colza (Brassica napus), em função da idade da planta instalou-se um experimento em condições de campo. Determinou-se a curva de crescimento da planta em função da idade, o acúmulo de nutrientes e a concentração de nutrientes em duas linhagens (1504 e 1530). O experimento foi conduzido no ano agricola de 1980, no solo argiloso Terra Roxa Estruturada, série Luiz de Queiroz. Após cada amostragem as plantas foram separadas em raiz, caule, folha, flor, vagem e semente e analisadas quimicamente para o nitrogênio, fósforo, potássio, cálcio, magnésio e enxofre. Nas condições em que o experimento foi conduzido pôde-se concluir que: - o ponto de máximo desenvolvimento da planta e produção de matéria seca é atingido aos 142 e 179 dias, apôs a emergência, para as linhagens 1504 e 1530, respectivamente; - as concentrações dos macronutrientes diminuem com o aumento da quantidade de matéria seca, mostrando o efeito de diluição; - o acúmulo dos macronutrientes atinge um máximo no fim do florescimento, entre 120 e 139 dias, para as duas linhagens ; - a ordem na absorção de nutrientes é a seguinte: K > N>Ca>S>P>Mg - a ordem de exportação dos nutrientes é K P K = Ca S Mg.