Transdermal formulations containing human sexual steroids: development and validation of methods and in vitro drug release

In vitro release of bioidentical hormones in four different liposomal transdermal emulsions (containing testosterone, progesterone, estradiol, or estradiol and estriol) was assessed. For this purpose, novel high-performance liquid chromatography methods were developed and validated in an eco-friendly manner and used to determine the in vitro release of such products. The methods were suitable for our intended goal, and the emulsions employed were found to be effective as transporting candidates for the efficient release of hormones in the transdermal delivery of human sexual steroids.

Reshaping Digital Library Services at National Level – Why, How, When?

Kristiina Hormia-Poutasen esitys Liber-konferenssissa Münchenissa, Saksassa 27.6.2013.

Modeling of Liquid-Solid Flow in Industrial Scale

In the present work, liquid-solid flow in industrial scale is modeled using the commercial software of Computational Fluid Dynamics (CFD) ANSYS Fluent 14.5. In literature, there are few studies on liquid-solid flow in industrial scale, but any information about the particular case with modified geometry cannot be found. The aim of this thesis is to describe the strengths and weaknesses of the multiphase models, when a large-scale application is studied within liquid-solid flow, including the boundary-layer characteristics. The results indicate that the selection of the most appropriate multiphase model depends on the flow regime. Thus, careful estimations of the flow regime are recommended to be done before modeling. The computational tool is developed for this purpose during this thesis. The homogeneous multiphase model is valid only for homogeneous suspension, the discrete phase model (DPM) is recommended for homogeneous and heterogeneous suspension where pipe Froude number is greater than 1.0, while the mixture and Eulerian models are able to predict also flow regimes, where pipe Froude number is smaller than 1.0 and particles tend to settle. With increasing material density ratio and decreasing pipe Froude number, the Eulerian model gives the most accurate results, because it does not include simplifications in Navier-Stokes equations like the other models. In addition, the results indicate that the potential location of erosion in the pipe depends on material density ratio. Possible sedimentation of particles can cause erosion and increase pressure drop as well. In the pipe bend, especially secondary flows, perpendicular to the main flow, affect the location of erosion.

Integrating Student Learning into the Repository Ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Audio and Video Repositories at Scale: Indiana University’s Media Digitization and Preservation Initiative

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Project Resource Management in R&D Public Sector Organization

In R&D organizations multiple projects are executed concurrently. Problems arises in managing shared resources since they are needed by multiple projects simultaneously. The objective of this thesis was to study how the project and resource management could be developed in a public sector R&D organization. The qualitative research was carried out in the Magnetic Measurements section at CERN where the section measures magnets for particle accelerators and builds state of the art measurement devices for various needs. Hence, the R&D and measurement projects are very time consuming and very complex. Based on the previous research and the requirements from the organization the best alter- native for resource management was to build a project management information system. A centralized database was constructed and on top of it was built an application for interacting and visualizing the project data. The application allows handling project data, which works as a basis for resource planning before and during the projects are executed. It is one way to standardize the work-flow of projects, which strengthens the project process. Additionally, it was noted that the inner customer’s database, the measurement system and the new application needed to be integrated. Further integration ensures that the project data is received efficiently from customers and available not only within the application but also during the concrete work. The research results introduced a new integrated application, which centralizes the project information flow with better visibility.

Influence of reactant absorption and dissolution in heterogeneous precipitation processes

In this research work, the aim was to investigate the volumetric mass transfer coefficient [kLa] of oxygen in stirred tank in the presence of solid particle experimentally. The kLa correlations as a function of propeller rotation speed and flow rate of gas feed were studied. The O2 and CO2 absorption in water and in solid-liquid suspensions and heterogeneous precipitation of MgCO3 were thoroughly examined. The absorption experiments of oxygen were conducted in various systems like pure water and in aqueous suspensions of quartz and calcium carbonate particles. Secondly, the precipitation kinetics of magnesium carbonate was also investigated. The experiments were performed to study the reactive crystallization with magnesium hydroxide slurry and carbon dioxide gas by varying the feed rates of carbon dioxide and rotation speeds of mixer. The results of absorption and precipitation are evaluated by titration, total carbon (TC analysis), and ionic chromatrography (IC). For calcium carbonate, the particle concentration was varied from 17.4 g to 2382 g with two size fractions: 5 µm and 45-63 µm sieves. The kLa and P/V values of 17.4 g CaCO3 with particle size of 5µm and 45-63 µm were 0.016 s-1 and 2400 W/m3. At 69.9 g concentration of CaCO3, the achieved kLa is 0.014 s-1 with particle size of 5 µm and 0.017 s-1 with particle size of 45 to 63 µm. Further increase in concentration of calcium carbonate, i.e. 870g and 2382g , does not affect volumetric mass transfer coeffienct of oxygen. It could be concluded from absorption results that maximum value of kLa is 0.016 s-1. Also particle size and concentration does affect the transfer rate to some extend. For precipitation experiments, the constant concentration of Mg(OH)2 was 100 g and the rotation speed varied from 560 to 750 rpm, whereas the used feed rates of CO2 were 1 and 9 L/min. At 560 rpm and feed rate of CO2 is 1 L/min, the maximum value of Mg ion and TC were 0.25 mol/litre and 0.12 mol/litre with the residence time of 40 min. When flow rate of CO2 increased to 9 L/min with same 560 rpm, the achieved value of Mg and TC were 0.3 mol/litre and 0.12 mol/L with shorter residence time of 30 min. It is concluded that feed rate of CO2 is dominant in precipitation experiments and it has a key role in dissociation and reaction of magnesium hydroxide in precipitation of magnesium carbonate.

Att tala om det osägbara : Nicolaus Cusanus cirkulära filosofi i verket De coniecturis med särskild hänsyn till Nelson Pikes tankar om unio mystica

In my dissertation called Speaking of the unsayable: The circular philosophy of Nicholas of Cusa in his work De coniecturis, I presuppose an internal (conceptual) relation between the personal experience of God of Nicholas of Cusa (1401-64) in 1438 and, on the other hand, his philosophy. I hence try to describe the precise character of this relation. Referring to the Norwegian scholars Egil Wyller and Viggo Rossvær, I assume that there is a circularity in Cusanus’ philosophy which appears as self-references (= a sentence refers to itself: A is explained by B and B is explained by A). Wyller finds three phases in the thought of Cusanus (1. De docta ignorantia I-III, 2. De coniecturis I-II, 3. all subsequent works). Rossvær finds it impossible to presuppose certain phases, as the philosophy of Cusanus continuously proceeds and remains open to new ideas. As Cusanus however treats his experience of God far more consciously in his second work De coniecturis than in De docta ignorantia, I find it possible to distinguish between the earlier Cusanus (De docta ignorantia including his earlier works) and the later Cusanus (De coniecturis, about 1444, as well as the following works). Cusanus creates a philosophy of language in outline expressed in De coniecturis, in which he presents two concepts of necessity, i.e. absolute necessity and logical, or reasonable, necessity. These are interrelated in the sense that the mind, or the self, logically affirms the absolute, or unsayable, necessity, which shows itself in the mind and which the mind affirms conjecturally. The endeavour conceptually to understand absolute necessity implies intuitive (or intellectual) contemplation, or vision (investigatio symbolica), in which the four mental unities (the absolute, the intellectual, the rational and the sensuous) work together according to the rules described in De coniecturis. In De coniecturis Cusanus obviously turns from a negative concept of the unsayable to a paradigmatic, which implies that he looks for principles of speaking of the unsayable and presents the idea of a divine language (divinaliter). However, he leaves this idea behind after De coniecturis, although he continues to create new concepts of the unsayable and incomprehensible. The intellectual language of absolute seeing is expressed in the subjunctive, i.e. conditionally. In order to describe the unsayable, Cusanus uses tautologies, the primary one of which is a concept of God, i.e. non aliud est non aliud quam non aliud (the non-other is non-other than the nonother). Wyller considers this the crucial point of the philosophy of Cusanus (De non aliud), described by the latter as the definition of definitions, i.e. the absolute definition. However, this definition is empty regarding its content. It demonstrates that God surpasses the coincidence of opposites (coincidentia oppositorum) and that he is “superunsayable” (superineffabilis), i.e. he is beyond what can be conceived or said. Nothing hence prevents us from speaking of him, provided that he is described as unsayable (= the paradigmatic concept of the unsayable). Here the mode of seeing is decisive. Cusanus in this context (and especially in his later literary production) uses modalities which concern possibility and necessity. His aim is to conduct any willing reader ahead on the way of life (philosophia mentalis). In De coniecturis II he describes the notion of human self-consciousness as the basis of spiritual mutuality in accordance with the humanistic tradition of his time. I mainly oppose the negatively determined concept of Christian mysticism presented by the German philosopher Kurt Flasch and prefer the presentation of Burkhard Mojsisch of the translogical and conjectural use of language in De coniecturis. In particular, I take account of the Scandinavian research, basically that of Johannes Sløk, Birgit H. Helander, Egil Wyller and Viggo Rossvær, who all consider the personal experience of God described by Cusanus a tacit precondition of his philosophy.

Kuali OLE: A Collaborative ILS Partnership

Presentation of Robert H. McDonald at the Library Network Days, October 22, 2014 in Helsinki. – Esitys Kirjastoverkkopäivillä 22.10.2014 Helsingissä

Connections that work – Linked Open Data demystified

Esitys Kirjastoverkkopäivillä 22.10.2014 Helsingissä – Presentation of Jakob Voß at the Library Network Days, October 22, 2014 in Helsinki.

Testing FCM technique for the wind energy scenarios in Finland

In the latter days, human activities constantly increase greenhouse gases emissions in the atmosphere, which has a direct impact on a global climate warming. Finland as European Union member, developed national structural plan to promote renewable energy generation, pursuing the aspects of Directive 2009/28/EC and put it on the sharepoint. Finland is on a way of enhancing national security of energy supply, increasing diversity of the energy mix. There are plenty significant objectives to develop onshore and offshore wind energy generation in country for a next few decades, as well as another renewable energy sources. To predict the future changes, there are a lot of scenario methods developed and adapted to energy industry. The Master’s thesis explored “Fuzzy cognitive maps” approach in scenarios developing, which captures expert’s knowledge in a graphical manner and using these captures for a raw scenarios testing and refinement. There were prospects of Finnish wind energy development for the year of 2030 considered, with aid of FCM technique. Five positive raw scenarios were developed and three of them tested against integrated expert’s map of knowledge, using graphical simulation. The study provides robust scenarios out of the preliminary defined, as outcome, assuming the impact of results, taken after simulation. The thesis was conducted in such way, that there will be possibilities to use existing knowledge captures from expert panel, to test and deploy different sets of scenarios regarding to Finnish wind energy development.

Thoughts on work-in-progress crowdsourcing metrics of digital collections

The presentation consists of work-in-progress metrics of #digitalkoot, the crowdsourcing project launched by National Library of Finland

Recent advances in monocular model-based tracking: a systematic literature review

In this paper, we review the advances of monocular model-based tracking for last ten years period until 2014. In 2005, Lepetit, et. al, [19] reviewed the status of monocular model based rigid body tracking. Since then, direct 3D tracking has become quite popular research area, but monocular model-based tracking should still not be forgotten. We mainly focus on tracking, which could be applied to aug- mented reality, but also some other applications are covered. Given the wide subject area this paper tries to give a broad view on the research that has been conducted, giving the reader an introduction to the different disciplines that are tightly related to model-based tracking. The work has been conducted by searching through well known academic search databases in a systematic manner, and by selecting certain publications for closer examination. We analyze the results by dividing the found papers into different categories by their way of implementation. The issues which have not yet been solved are discussed. We also discuss on emerging model-based methods such as fusing different types of features and region-based pose estimation which could show the way for future research in this subject.

Non-parametric stability analyses of dough properties in wheat

AbstractLiterature has unveiled that a paper has not been published yet on using non-parametric stability statistics (NPSSs) for evaluating genotypic stability in dough properties of wheat. Accordingly, the effects of genotype (G), environment (E) and GE interaction (GEI) on alveograph parameters, i.e. dough baking strength (W) and its tenacity (P)/extensibility (L), of 18 wheat (T. aestivum L.) genotypes were studied under irrigated field conditions in an 8-year trial (2006-2014) in central Turkey. Furthermore, genotypic stability for W and P/L was determined using 8 NPSSs viz. RM-Rank mean, RSD-Rank’s standard deviation, RS-Rank Sum, TOP-Ranking, Si(1), Si(2), Si(3) and Si(6) rank statistics. The ANOVA revealed that W and P/L were primarily controlled by E, although G and GEI also had significant effects. Among the 8 NPSSs, only RM, RS and TOP statistics were suitable for detecting the genotypes with high stable and bread making quality (e.g. G1 and G17). In conclusion, using RM, RS and TOP statistics is advisable to select for dough quality in wheat under multi-environment trials (METs).