543 resultados para Penalty kicks


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The profound crisis that has affected the Spanish economy since mid - 2008 has been characterized by significant job losses and a marked rise in the country´s unemployment rate. However, unemployment has had a differential impact on different population groups. Compared to native, immigrant workers have experienced higher rates of job loss. Against this backdrop, this paper examines the differences between immigrants and natives (distinguished by gender) in terms of their probability of suffering job loss in the downturn of late 2008 and 2009. Our results indicate that the higher rate of job loss among female immigrant workers can be fully explained by their lower endowment of human capital. By contrast, human capital endowment and over-representation in certain occupations, sectors and regions in which the crisis had greatest impact do not appear to be the only reason for the penalty suffered by immigrant males in terms of their chances of losing their job in the downturn.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper considers the structures and applications of the criminal judicial system in the Islamic Later Middle Period as it developed in India under the sultans of Delhi (1200-1400 CE). A fundamental issue in crime and punishment is the relationship between sultanic power and religious authority. Particularly at stake in this relationship is the question of who can sanction the highest form of punishment, i.e. the death penalty (siyāsa). Contemporary historians and scholars in the study of religion investigating the relationship between sharīʿa and siyāsa to reveal the extent and limits of sultanic power show a system of governance that allowed for the delegation of authority, particularly in the area of the judiciary, from the sultan down to viziers and judges. Some scholars depict the relationship between the ʿulamāʾ and the sultan as a kind of stand off. The actual dynamics of legal jurisdiction were much more complex. This study proposes a new interpretive framework for understanding the relationship between political power and religious authority through a critical analysis of the criminal judicial system, law, and historical narrative. In particular, I consider a murder case described by Shams al-dīn Sirāj ʿAfīf in one of the most significant histories written in the later Delhi Sultanate, the Tārīkh-i Fīrūzshāhī.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper studies the incidence and consequences of the mismatch between formal education and the educational requirements of jobs in Estonia during the years 1997-2003. We fi nd large wage penalties associated with the phenomenon of educational mismatch. Moreover, the incidence and wage penalty of mismatches increase with age. This suggests that structural educational mismatches can occur after fast transition periods. Our results are robust for various methodologies, and more importantly regarding departures from the exogeneity assumptions inherent in the matching estimators used in our analysis

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Chemical-looping combustion (CLC) is a novel combustion technology with inherent separation of the greenhouse gas CO2. The technique typically employs a dual fluidized bed system where a metal oxide is used as a solid oxygen carrier that transfers the oxygen from combustion air to the fuel. The oxygen carrier is looping between the air reactor, where it is oxidized by the air, and the fuel reactor, where it is reduced by the fuel. Hence, air is not mixed with the fuel, and outgoing CO2 does not become diluted by the nitrogen, which gives a possibility to collect the CO2 from the flue gases after the water vapor is condensed. CLC is being proposed as a promising and energy efficient carbon capture technology, since it can achieve both an increase in power station efficiency simultaneously with low energy penalty from the carbon capture. The outcome of a comprehensive literature study concerning the current status of CLC development is presented in this thesis. Also, a steady state model of the CLC process, based on the conservation equations of mass and energy, was developed. The model was used to determine the process conditions and to calculate the reactor dimensions of a 100 MWth CLC system with bunsenite (NiO) as oxygen carrier and methane (CH4) as fuel. This study has been made in Oxygen Carriers and Their Industrial Applications research project (2008 – 2011), funded by the Tekes – Functional Material program. I would like to acknowledge Tekes and participating companies for funding and all project partners for good and comfortable cooperation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

En termes generals, es pot definir l’Eficiència Energètica com la reducció del consum d’energia mantenint els mateixos serveis energètics, sense disminuir el nostre confort i qualitat de vida, protegint el medi ambient, assegurant el proveïment i fomentant un comportament Sostenible al seu ús. L’objectiu principal d’aquest treball, és reduir el consum d’energia i terme de potència contractat a la Universitat de Vic, aplicant un programa d’estalvi amb mesures correctores en el funcionament de les seves instal·lacions o espais. Per tal de poder arribar a aquest objectiu marcat, prèviament s’ha realitzat un estudi acurat, obtenint tota la informació necessària per poder aplicar les mesures correctores a la bossa més important de consum. Un cop trobada, dur a terme l’estudi de la viabilitat de la inversió de les mesures correctores més eficients, optimitzant els recursos destinats. L’espai on s’ha dut a terme l’estudi, ha estat a l’edifici F del Campus Miramarges, seguint les indicacions d’Arnau Bardolet (Cap de Manteniment de la UVIC). Aquest edifici consta d’un entresol, baixos i quatre plantes. L’equip de mesura que s’ha fet servir per realitzar l’estudi, és de la marca Circutor sèrie AR5-L, aquests equips són programables que mesuren, calculen i emmagatzemen en memòria els principals paràmetres elèctrics en xarxes trifàsiques. Els projectes futurs complementaris que es podrien realitzar a part d’aquest són: instal·lar sensors, instal·lar mòduls convertidors TCP/IP, aprofitar la xarxa intranet i crear un escada amb un sinòptic de control i gestió des d’un punt de treball. Aquest aplicatiu permet visualitzar en una pantalla d’un PC tots els estats dels elements controlats mitjançant un sinòptic (encendre/parar manualment l’enllumenat i endolls de les aules, estat d’enllumenat i endolls de les aules, consums instantanis/acumulats energètics, estat dels passadissos entre altres) i explotar les dades recollides a la base de dades. Cada espai tindria la seva lògica de funcionament automàtic específic. Entre les conclusions més rellevants obtingudes en aquest treball s’observa: · Que és pot reduir la potència contractada a la factura a l’estar per sota de la realment consumida. · Que no hi ha penalitzacions a la factura per consum de reactiva, ja que el compensador funciona correctament. · Que es pot reduir l’horari de l’inici del consum d’energia, ja que no correspon a l’activitat docent. · Els valors de la tensió i freqüència estan dintre de la normalitat. · Els harmònics estan al llindar màxim. Analitzant aquestes conclusions, voldria destacar les mesures correctores més importants que es poden dur a terme: canvi tecnològic a LED, temporitzar automàticament l’encesa i apagada dels fluorescents i equips informàtics de les aules “seguint calendari docent”, instal·lar sensors de moviment amb detecció lumínica als passadissos. Totes les conclusions extretes d’aquest treball, es poden aplicar a tots els edificis de la facultat, prèviament realitzant l’estudi individual de cadascuna, seguint els mateixos criteris per tal d’optimitzar la inversió.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

En los ejercicios de evaluación de la denominada “penalización urbana”, la mortalidad infantil y juvenil suele ser uno o de los indicadores más habituales. Disponer de indicadores relativos a sus condiciones de salud es más difícil. Una opción son los datos antropométricos. Este tipo de información abunda para las poblaciones adultas –especialmente las masculinas enroladas en los ejércitos- pero es más escasa para las infantiles. El propósito de este trabajo es contribuir al conocimiento de las condiciones de salud de este grupo de la población barcelonesa durante algo más de la primera mitad del siglo XX, a partir del estudio de un conjunto de 9 estadísticas antropométricas publicadas entre 1900 y 1961. A través de una reconstrucción estadística, mediante el empleo de las Tablas de Crecimiento de la población infantil española elaboradas por M. Hernández, E Sánchez y B.Sobradillo en 1995, se han estandarizado las tallas y comparado los Indices de Masa Corporal calculados a partir de las medidas publicadas. Los principales resultados son: a) La presencia de diferentes pautas en las trayectorias seculares de crecimiento de niños y niñas. El crecimiento de las tallas entre los niños fue de 1,09 cm por decenio entre 1898 y 1945 y de 1,40 entre 1945 y 1961. Mientras que en el caso de las niñas entre 1898 y 1945 fue de 0,14 cm por decenio para aumentar a 2,18 entre 1945 y 1981. b) Las diferencias sociales en los indicadores antropométricos persisten a lo largo del periodo estudiado c) Los porcentajes de población infantil con probable malnutrición se situaron en torno al 24 por ciento para las generaciones nacidas entre 1885 y 1940, para ir descendiendo de forma irreversible en las nacidas a partir de 1950. De este modo en la década años setenta del siglo XX no parece existir evidencia de tal estado en la población infantil barcelonesa.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tutkielman tavoitteena on oikeudellisten lähteiden systematisoinnilla tuottaa johdonmukainen kuvaus poliisin, rajavartiomiehen sekä ammattisotilaan virkavelvollisuuksista, oikeudellisesta vastuusta ja virkarikosten rangaistavuudesta. Päähuomio kohdistuu virkamiehen määräaikaiseen virantoimituksesta erottamiseen. Oikeudellisella argumentaatiolla pyritään esittämään lainmukainen ja hyväksyttävä tulkintakannanotto siihen, miten kyseistä säädöstä tulisi tulkita. Tutkimusmetodi työssä on oikeusdogmatiikka. Ensisijaisena aineistona tutkielmassa on voimassa oleva lainsäädäntö valmisteluaineistoineen. Toissijaisina lähteinä käytetään kirjallisuutta, viranomaisten kurinpitopäätöksiä ja haastatteluja. Määräaikainen erottaminen voidaan määrätä virkamiehelle, joka toimii vastoin virkavelvollisuuksiaan tai laiminlyö niitä. Säädös on tulkittavissa laajentavasti siten, että myös muut kuin selkeästi viranomaisen valvontavastuulle kuuluvat teot voidaan katsoa virkatehtävien vastaiseksi. Erityisen käyttäytymisvelvoitteen johdosta menettely on rangaistavaa myös vapaa-ajalla. Määräaikainen erottaminen sijoittuu rangaistusasteikossa varoituksen ja irtisanomisen väliin. Rangaistus ei edellytä erityisen painavia perusteita, joita vaaditaan virkamiehen irtisanomiseen. Uuden säädöksen myötä irtisanomisten määrä on vähentynyt Rajavartiolaitoksessa. Säädöksestä on muotoutunut kurinpidollinen lisärangaistus, joka on määrätty virkamiehelle hallinnollisella päätöksellä yleensä rikostuomion jälkeen. Säädös on kuitenkin tarkoitettu ja se mahdollistaa myös puuttumisen varsinaisten virkatehtävien laiminlyönteihin. Lainsäädännön selkeyttämiseksi määräaikaisen erottamisen säädös tulisi poistaa eri viranomaisten erityislainsäädännöstä ja liittää suoraan virkamieslakiin. Säädöksen soveltaminen tulisi ulottaa koskemaan myös muita virkamiehiä, jotka palvelevat kyseisissä viranomaisissa. Tutkimuksen kohteena oleva virkamiesryhmä alistuu virkamiesoikeudessa blankkorangaistusuhan alle. Virkamiehen on vaikea hahmottaa kaikkea rangaistavaa toimintaa, ja virantoimittamisvelvollisuus on usein täsmentymätön ja tulkinnanvarainen. Kokonaisharkinnassa korostuvat myös muut kuin oikeudelliset lähteet (esimerkiksi moraalikäsitykset, etiikka, ohjeet, virkamiehen elämäntilanne). Sotilaiden ja poliisin oikeudenhoito poikkeaa monilta osin muiden virkamiesten oikeudenhoitomenettelystä. Rajavartiolaitoksessa sotilasoikeudenhoidon määräykset ja ohjeet ovat selkeästi puutteelliset. Rajavartiolaitoksen tehtäväkentän ja toimivaltuudet huomioiden tulisi kurinpito- ja virkarikosten tutkinnoissa lähentyä poliisin mallia sekä hyödyntää rikostorjuntahenkilöstön ammattitaitoa oman henkilökunnan esitutkinnoissa. Erityisen turvallisuusviranomaisten virkarikoksiin erikoistuneen tutkintaorganisaation perustaminen voisi tehostaa ja parantaa esitutkintojen tasoa sekä lisätä oikeusvarmuutta.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

When modeling machines in their natural working environment collisions become a very important feature in terms of simulation accuracy. By expanding the simulation to include the operation environment, the need for a general collision model that is able to handle a wide variety of cases has become central in the development of simulation environments. With the addition of the operating environment the challenges for the collision modeling method also change. More simultaneous contacts with more objects occur in more complicated situations. This means that the real-time requirement becomes more difficult to meet. Common problems in current collision modeling methods include for example dependency on the geometry shape or mesh density, calculation need increasing exponentially in respect to the number of contacts, the lack of a proper friction model and failures due to certain configurations like closed kinematic loops. All these problems mean that the current modeling methods will fail in certain situations. A method that would not fail in any situation is not very realistic but improvements can be made over the current methods.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper we present an algorithm for the numerical simulation of the cavitation in the hydrodynamic lubrication of journal bearings. Despite the fact that this physical process is usually modelled as a free boundary problem, we adopted the equivalent variational inequality formulation. We propose a two-level iterative algorithm, where the outer iteration is associated to the penalty method, used to transform the variational inequality into a variational equation, and the inner iteration is associated to the conjugate gradient method, used to solve the linear system generated by applying the finite element method to the variational equation. This inner part was implemented using the element by element strategy, which is easily parallelized. We analyse the behavior of two physical parameters and discuss some numerical results. Also, we analyse some results related to the performance of a parallel implementation of the algorithm.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Effective control and limiting of carbon dioxide (CO₂) emissions in energy production are major challenges of science today. Current research activities include the development of new low-cost carbon capture technologies, and among the proposed concepts, chemical combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) have attracted significant attention allowing intrinsic separation of pure CO₂ from a hydrocarbon fuel combustion process with a comparatively small energy penalty. Both CLC and CLOU utilize the well-established fluidized bed technology, but several technical challenges need to be overcome in order to commercialize the processes. Therefore, development of proper modelling and simulation tools is essential for the design, optimization, and scale-up of chemical looping-based combustion systems. The main objective of this work was to analyze the technological feasibility of CLC and CLOU processes at different scales using a computational modelling approach. A onedimensional fluidized bed model frame was constructed and applied for simulations of CLC and CLOU systems consisting of interconnected fluidized bed reactors. The model is based on the conservation of mass and energy, and semi-empirical correlations are used to describe the hydrodynamics, chemical reactions, and transfer of heat in the reactors. Another objective was to evaluate the viability of chemical looping-based energy production, and a flow sheet model representing a CLC-integrated steam power plant was developed. The 1D model frame was succesfully validated based on the operation of a 150 kWth laboratory-sized CLC unit fed by methane. By following certain scale-up criteria, a conceptual design for a CLC reactor system at a pre-commercial scale of 100 MWth was created, after which the validated model was used to predict the performance of the system. As a result, further understanding of the parameters affecting the operation of a large-scale CLC process was acquired, which will be useful for the practical design work in the future. The integration of the reactor system and steam turbine cycle for power production was studied resulting in a suggested plant layout including a CLC boiler system, a simple heat recovery setup, and an integrated steam cycle with a three pressure level steam turbine. Possible operational regions of a CLOU reactor system fed by bituminous coal were determined via mass, energy, and exergy balance analysis. Finally, the 1D fluidized bed model was modified suitable for CLOU, and the performance of a hypothetical 500 MWth CLOU fuel reactor was evaluated by extensive case simulations.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis is done as a part of the NEOCARBON project. The aim of NEOCARBON project is to study a fully renewable energy system utilizing Power-to-Gas or Power-to-Liquid technology for energy storage. Power-to-Gas consists of two main operations: Hydrogen production via electrolysis and methane production via methanation. Methanation requires carbon dioxide and hydrogen as a raw material. This thesis studies the potential carbon dioxide sources within Finland. The different sources are ranked using the cost and energy penalty of the carbon capture, carbon biogenity and compatibility with Power-to-Gas. It can be concluded that in Finland there exists enough CO2 point sources to provide national PtG system with sufficient amounts of carbon. Pulp and paper industry is single largest producer of biogenic CO2 in Finland. It is possible to obtain single unit capable of grid balancing operations and energy transformations via Power-to-Gas and Gas-to-Power by coupling biogas plants with biomethanation and CHP units.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Recent Storms in Nordic countries were a reason of long power outages in huge territories. After these disasters distribution networks' operators faced with a problem how to provide adequate quality of supply in such situation. The decision of utilization cable lines rather than overhead lines were made, which brings new features to distribution networks. The main idea of this work is a complex analysis of medium voltage distribution networks with long cable lines. High value of cable’s specific capacitance and length of lines determine such problems as: high values of earth fault currents, excessive amount of reactive power flow from distribution to transmission network, possibility of a high voltage level at the receiving end of cable feeders. However the core tasks was to estimate functional ability of the earth fault protection and the possibility to utilize simplified formulas for operating setting calculations in this network. In order to provide justify solution or evaluation of mentioned above problems corresponding calculations were made and in order to analyze behavior of relay protection principles PSCAD model of the examined network have been created. Evaluation of the voltage rise in the end of a cable line have educed absence of a dangerous increase in a voltage level, while excessive value of reactive power can be a reason of final penalty according to the Finish regulations. It was proved and calculated that for this networks compensation of earth fault currents should be implemented. In PSCAD models of the electrical grid with isolated neutral, central compensation and hybrid compensation were created. For the network with hybrid compensation methodology which allows to select number and rated power of distributed arc suppression coils have been offered. Based on the obtained results from experiments it was determined that in order to guarantee selective and reliable operation of the relay protection should be utilized hybrid compensation with connection of high-ohmic resistor. Directional and admittance based relay protection were tested under these conditions and advantageous of the novel protection were revealed. However, for electrical grids with extensive cabling necessity of a complex approach to the relay protection were explained and illustrated. Thus, in order to organize reliable earth fault protection is recommended to utilize both intermittent and conventional relay protection with operational settings calculated by the use of simplified formulas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.