Carbon-carbon bond forming reactions from bis(carbene)-platinum(II) complexes and olefin polymerization and oligomerization using group 4 post-metallocene complexes

A long-standing challenge in transition metal catalysis is selective C–C bond coupling of simple feedstocks, such as carbon monoxide, ethylene or propylene, to yield value-added products. This work describes efforts toward selective C–C bond formation using early- and late-transition metals, which may have important implications for the production of fuels and plastics, as well as many other commodity chemicals.

The industrial Fischer-Tropsch (F-T) process converts synthesis gas (syngas, a mixture of CO + H₂) into a complex mixture of hydrocarbons and oxygenates. Well-defined homogeneous catalysts for F-T may provide greater product selectivity for fuel-range liquid hydrocarbons compared to traditional heterogeneous catalysts. The first part of this work involved the preparation of late-transition metal complexes for use in syngas conversion. We investigated C–C bond forming reactions via carbene coupling using bis(carbene)platinum(II) compounds, which are models for putative metal–carbene intermediates in F-T chemistry. It was found that C–C bond formation could be induced by either (1) chemical reduction of or (2) exogenous phosphine coordination to the platinum(II) starting complexes. These two mild methods afforded different products, constitutional isomers, suggesting that at least two different mechanisms are possible for C–C bond formation from carbene intermediates. These results are encouraging for the development of a multicomponent homogeneous catalysis system for the generation of higher hydrocarbons.

A second avenue of research focused on the design and synthesis of post-metallocene catalysts for olefin polymerization. The polymerization chemistry of a new class of group 4 complexes supported by asymmetric anilide(pyridine)phenolate (NNO) pincer ligands was explored. Unlike typical early transition metal polymerization catalysts, NNO-ligated catalysts produce nearly regiorandom polypropylene, with as many as 30-40 mol % of insertions being 2,1-inserted (versus 1,2-inserted), compared to <1 mol % in most metallocene systems. A survey of model Ti polymerization catalysts suggests that catalyst modification pathways that could affect regioselectivity, such as C–H activation of the anilide ring, cleavage of the amine R-group, or monomer insertion into metal–ligand bonds are unlikely. A parallel investigation of a Ti–amido(pyridine)phenolate polymerization catalyst, which features a five- rather than a six-membered Ti–N chelate ring, but maintained a dianionic NNO motif, revealed that simply maintaining this motif was not enough to produce regioirregular polypropylene; in fact, these experiments seem to indicate that only an intact anilide(pyridine)phenolate ligated-complex will lead to regioirregular polypropylene. As yet, the underlying causes for the unique regioselectivity of anilide(pyridine)phenolate polymerization catalysts remains unknown. Further exploration of NNO-ligated polymerization catalysts could lead to the controlled synthesis of new types of polymer architectures.

Finally, we investigated the reactivity of a known Ti–phenoxy(imine) (Ti-FI) catalyst that has been shown to be very active for ethylene homotrimerization in an effort to upgrade simple feedstocks to liquid hydrocarbon fuels through co-oligomerization of heavy and light olefins. We demonstrated that the Ti-FI catalyst can homo-oligomerize 1-hexene to C₁₂ and C₁₈ alkenes through olefin dimerization and trimerization, respectively. Future work will include kinetic studies to determine monomer selectivity by investigating the relative rates of insertion of light olefins (e.g., ethylene) vs. higher α-olefins, as well as a more detailed mechanistic study of olefin trimerization. Our ultimate goal is to exploit this catalyst in a multi-catalyst system for conversion of simple alkenes into hydrocarbon fuels.

Intramolecular conflict : conformation and self-assembly of architecturally complex macromolecules in solution

The solution behavior of linear polymer chains is well understood, having been the subject of intense study throughout the previous century. As plastics have become ubiquitous in everyday life, polymer science has grown into a major field of study. The conformation of a polymer in solution depends on the molecular architecture and its interactions with the surroundings. Developments in synthetic techniques have led to the creation of precision-tailored polymeric materials with varied topologies and functionalities. In order to design materials with the desired properties, it is imperative to understand the relationships between polymer architecture and their conformation and behavior. To meet that need, this thesis investigates the conformation and self-assembly of three architecturally complex macromolecular systems with rich and varied behaviors driven by the resolution of intramolecular conflicts. First we describe the development of a robust and facile synthetic approach to reproducible bottlebrush polymers (Chapter 2). The method was used to produce homologous series of bottlebrush polymers with polynorbornene backbones, which revealed the effect of side-chain and backbone length on the overall conformation in both good and theta solvent conditions (Chapter 3). The side-chain conformation was obtained from a series of SANS experiments and determined to be indistinguishable from the behavior of free linear polymer chains. Using deuterium-labeled bottlebrushes, we were able for the first time to directly observe the backbone conformation of a bottlebrush polymer which showed self-avoiding walk behavior. Secondly, a series of SANS experiments was conducted on a homologous series of Side Group Liquid Crystalline Polymers (SGLCPs) in a perdeuterated small molecule liquid crystal (5CB). Monodomain, aligned, dilute samples of SGLCP-b-PS block copolymers were seen to self-assemble into complex micellar structures with mutually orthogonally oriented anisotropies at different length scales (Chapter 4). Finally, we present the results from the first scattering experiments on a set of fuel-soluble, associating telechelic polymers. We observed the formation of supramolecular aggregates in dilute (≤0.5wt%) solutions of telechelic polymers and determined that the choice of solvent has a significant effect on the strength of association and the size of the supramolecules (Chapter 5). A method was developed for the direct estimation of supramolecular aggregation number from SANS data. The insight into structure-property relationships obtained from this work will enable the more targeted development of these molecular architectures for their respective applications.

Gestão de saúde, segurança, meio ambiente e responsabilidade social em micro e pequenas empresas recicladoras de plásticos PEBD e PET no Estado do Rio de Janeiro

A presente dissertação tem como tema a gestão de saúde, segurança, meio ambiente e responsabilidade social em micro e pequenas empresas recicladoras de plásticos PEBD e PET no Estado do Rio de Janeiro. A reciclagem de plástico contribui para minimizar os resíduos sólidos gerados pelos processos industriais. O objetivo geral deste estudo é verificar como as atividades de reciclagem impactam na saúde e na segurança do trabalhador e levantar algumas questões relacionadas com a responsabilidade sócio-ambiental, com destaque para o atendimento às normas regulamentadoras, legislação de saúde, segurança e meio ambiente aplicável e sistemas de gestão. Para atingir tal objetivo, a metodologia do presente estudo foi dividida em: pesquisa bibliográfica, elaborada através de consultas a livros, a artigos, a legislação e a bancos de dados de reconhecida credibilidade; elaboração de um questionário direcionado; visitas técnicas, e entrevistas com os encarregados ou donos das empresas, a fim de obter dados para avaliar as condições de trabalho relativas à saúde e segurança, meio ambiente e responsabilidade social. Durante esta etapa foram visitadas quatro recicladoras de plástico, todas situadas no Estado do Rio de Janeiro, sendo três do segmento de PEBD e uma de PET. Os resultados obtidos mostram que, numa avaliação global, apenas 24% dos itens avaliados foram atendidos na sua íntegra, o que demonstra um baixo índice de atendimento às questões relativas à saúde, segurança e meio ambiente e responsabilidade social. Nas avaliações individuais destes mesmos itens constatou-se que o atendimento foi de 38%, 10% e 54%, respectivamente. Enfim, o presente estudo mostra que há necessidade de maior atenção aos requisitos relativos à saúde e segurança do trabalhador, ao meio ambiente e às questões sociais, em função dos riscos do processo de produção do plástico reciclado

Co-pirólise de polipropileno pós-consumo com gasóleo

O presente trabalho buscou avaliar o processo de co-pirólise de resíduos de polipropileno com gasóleo, variando a temperatura e a quantidade de polipropileno no meio reacional. A co-pirólise é uma rota promissora, uma vez que minimiza o impacto ambiental causado pela disposição do plástico de maneira inadequada, evita seu acúmulo em lixões e permite um melhor aproveitamento de um recurso natural não-renovável, o petróleo, matéria-prima importante para a geração de energia e obtenção de produtos químicos. As amostras de polipropileno e gasóleo foram submetidas à co-pirólise térmica em atmosfera inerte, em sistema de leito fixo, sob fluxo constante de nitrogênio, variando a temperatura de 400C a 500C e a quantidade de PP no meio reacional de 0,1 a 1,0 g. A influência do gasóleo no meio foi avaliada pelos testes na ausência de PP. Os líquidos pirolíticos obtidos foram caracterizados por cromatografia gasosa modificada, com o objetivo de avaliar a geração de frações na faixa da destilação do diesel. De uma maneira geral, pôde-se observar que o aumento da quantidade de PP no meio reacional favorece a redução do rendimento de líquido pirolítico e o aumento da quantidade de sólido gerado, efeito inverso ao do aumento da temperatura. Com relação ao rendimento geral de produtos na faixa de destilação do diesel na co-pirólise, a adição de PP ao meio não interfere muito no resultado. Já o aumento de temperatura favorece o aumento do rendimento de produtos nessa faixa de destilação. Os resultados obtidos comprovam o potencial da co-pirólise como método de reciclagem química de artefatos de polipropileno pós-consumo

Poly(lactic acid)-based bio-blends and nanocomposites

172 p.

Biodegradable thermoplastic elastomers: tuning viscoelastic properties and shape memory

286 p.