Cultivation of Flammulina velutipesmushroom using various agro-residues as a fruiting substrate

The objective of this work was to evaluate the feasibility of different agro-residues as a carbon source in the fruiting substrates of Flammulina velutipesmushroom and the effect of supplementation with the nitrogen sources spent brewer's yeast and rice bran. The following fruiting substrates were evaluated: rubber wood sawdust (SD), paddy straw (PS), palm empty fruit bunches (EFB), and palm-pressed fiber (PPF). Cultivation was done on each agro-residue, based on formulations consisting of two substrates at the ratios of 3:1, 1:1, and 1:3. Mycelial growth rate and basidiocarp yield were evaluated. The best fruiting substrates were PS+EFB (25:75), PS+PPF (50:50), and PPF (100), with biological efficiency of 185.09±36.98, 150.89±50.35, and 129.06±14.51%, respectively. No significant effects of supplementation with rice bran and spent yeast were observed on mycelial growth rate and biological efficiency. The cultivation of F. velutipes on oil palm wastes does not require additional nitrogen sources.

Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Residues of carbosulfan and its carbofuran metabolites and 3-hydroxy-carbofuran in oranges

The objectives of this study were to evaluate the residues of the insecticide carbosulfan and its carbofuran metabolites and 3-hydroxy-carbofuran in orange compartments (whole fruit, bagasse and juice) and comparison between the residual levels found in fruits with the maximum residue level and the safety interval established by the Brazilian legislation. Two field experiments were carried out, both with the following treatments: a-check; b-one application of 10 g of carbosulfan . 100 L-1 of water; c-one application with twice the rate applied in treatment b; d-four applications with the same rate applied in treatment b. Samples were taken at (-1), zero, 1, 3, 7, 14, 21 and 28 days after the last or unique application. The quantitative determinations were done by gas chromatography technique, using a nitrogen-phosphorus detector. The carbosulfan metabolism to its carbofuran metabolite was rapid (3 days), being both analytes concentrated in the bagasse (peel + flavedo + albedo). However, the metabolism of carbofuran to 3-hydroxy-carbofuran was of low intensity or this metabolite was quickly dissipated. Carbosulfan residues and its metabolites did not penetrate into the fruit, thus not contaminating the juice. The use of the pesticide was adequate, with respect to fruit consumption, in relation to the Brazilian legislation.

Differences in pharmaceutical consumption and expenses between immigrant and Spanish-born populations in Lleida, (Spain): a 6-months prospective observational study

Background: There are few studies comparing pharmaceutical costs and the use of medications between immigrants and the autochthonous population in Spain. The objective of this study is to evaluate whether there are differences in pharmaceutical consumption and expenses between immigrant and Spanish-born populations. Methods: Prospective observational study in 1,630 immigrants and 4,154 Spanish-born individuals visited by fifteen primary care physicians at five public Primary Care Clinics (PCC) during 2005 in the city of Lleida, Catalonia (Spain). Data on pharmaceutical consumption and expenses was obtained from a comprehensive computerized data-collection system. Multinomial regression models were used to estimate relative risks and confidence intervals of pharmaceutical expenditure, adjusting for age and sex. Results: The percentage of individuals that purchased medications during a six-month period was 53.7% in the immigrant group and 79.2% in the autochthonous group. Pharmaceutical expenses and consumption were lower in immigrants than in autochthonous patients in all age groups and both genders. The relative risks of being in the highest quartile of expenditure, for Spanish-born versus immigrants, were 6.9, 95% CI = (4.2, 11.5) in men and 5.3, 95% CI = (3.5, 8.0) in women, with the reference category being not having any pharmaceutical expenditure. Conclusion: Pharmaceutical expenses are much lower for immigrants with respect to autochthonous patients, both in the percentage of prescriptions filled at pharmacies and the number of containers of medication obtained, as well as the prices of the medications used. Future studies should explore which factors explain the observed differences in pharmaceutical expenses and if these disparities produce health inequalities.

The Pseudomonas aeruginosa antimetabolite L -2-amino-4-methoxy-trans-3-butenoic acid (AMB) is made from glutamate and two alanine residues via a thiotemplate-linked tripeptide precursor.

The Pseudomonas aeruginosa toxin L-2-amino-4-methoxy-trans-3-butenoic acid (AMB) is a non-proteinogenic amino acid which is toxic for prokaryotes and eukaryotes. Production of AMB requires a five-gene cluster encoding a putative LysE-type transporter (AmbA), two non-ribosomal peptide synthetases (AmbB and AmbE), and two iron(II)/α-ketoglutarate-dependent oxygenases (AmbC and AmbD). Bioinformatics analysis predicts one thiolation (T) domain for AmbB and two T domains (T1 and T2) for AmbE, suggesting that AMB is generated by a processing step from a precursor tripeptide assembled on a thiotemplate. Using a combination of ATP-PPi exchange assays, aminoacylation assays, and mass spectrometry-based analysis of enzyme-bound substrates and pathway intermediates, the AmbB substrate was identified to be L-alanine (L-Ala), while the T1 and T2 domains of AmbE were loaded with L-glutamate (L-Glu) and L-Ala, respectively. Loading of L-Ala at T2 of AmbE occurred only in the presence of AmbB, indicative of a trans loading mechanism. In vitro assays performed with AmbB and AmbE revealed the dipeptide L-Glu-L-Ala at T1 and the tripeptide L-Ala-L-Glu-L-Ala attached at T2. When AmbC and AmbD were included in the assay, these peptides were no longer detected. Instead, an L-Ala-AMB-L-Ala tripeptide was found at T2. These data are in agreement with a biosynthetic model in which L-Glu is converted into AMB by the action of AmbC, AmbD, and tailoring domains of AmbE. The importance of the flanking L-Ala residues in the precursor tripeptide is discussed.

Particle Size Analysis of Pharmaceutical Powders by Laser Diffraction

Raaka-aineen hiukkaskoko on lääkekehityksessä keskeinen materiaaliparametri. Lääkeaineen partikkelikoko vaikuttaa moneen lääketuotteen tärkeään ominaisuuteen, esimerkiksi lääkkeen biologiseen hyväksikäytettävyyteen. Tässä diplomityössä keskityttiin jauhemaisten lääkeaineiden hiukkaskoon määrittämiseen laserdiffraktiomenetelmällä. Menetelmä perustuu siihen, että partikkeleista sironneen valon intensiteetin sirontakulmajakauma on riippuvainen partikkelien kokojakaumasta. Työn kirjallisuusosassa esiteltiin laserdiffraktiomenetelmän teoriaa. PIDS (Polarization Intensity Differential Scattering) tekniikka, jota voidaan käyttää laserdiffraktion yhteydessä, on myös kuvattu kirjallisuusosassa. Muihin menetelmiin perustuvista analyysimenetelmistä tutustuttiin mikroskopiaan sekä aerodynaamisen lentoajan määrittämiseen perustuvaan menetelmään. Kirjallisuusosassa esiteltiin myös partikkelikoon yleisimpiä esitystapoja. Työn kokeellisen osan tarkoituksena oli kehittää ja validoida laserdiffraktioon perustuva partikkelikoon määritysmenetelmä tietylle lääkeaineelle. Menetelmäkehitys tehtiin käyttäen Beckman Coulter LS 13 320 laserdiffraktoria. Laite mahdollistaa PIDS-tekniikan käytön laserdiffraktiotekniikan ohella. Menetelmäkehitys aloitettiin arvioimalla, että kyseinen lääkeaine soveltuu parhaiten määritettäväksi nesteeseen dispergoituna. Liukoisuuden perusteella väliaineeksi valittiin tällä lääkeaineella kyllästetty vesiliuos. Dispergointiaineen sekä ultraäänihauteen käyttö havaittiin tarpeelliseksi dispergoidessa kyseistä lääkeainetta kylläiseen vesiliuokseen. Lopuksi sekoitusnopeus näytteensyöttöyksikössä säädettiin sopivaksi. Validointivaiheessa kehitetyn menetelmän todettiin soveltuvan hyvin kyseiselle lääkeaineelle ja tulosten todettiin olevan oikeellisia sekä toistettavia. Menetelmä ei myöskään ollut herkkä pienille häiriöille.

Residues of b-lactams and quinolones in tissues and milk samples. Confirmatory analysis by liquid chromatography-mass spectrometry

The aim of this work is to optimize and validate methods for the multiresidue determination of series of families of antibiotics as quinolones, penicillins and cephalosporins included in European regulation in food samples using LC-MS/MS. Different extraction techniques and clean-up applied to antibiotics in meat were compared. The quality parameters were established according with EU guideline. The developed method was applied to 49 positive raw milk samples from animal medicated with different antibiotics; the 63% of the analyzed samples were found to be compliant. ___________________________________________________________________________________________

Operative level purchasing in pharmaceutical wholesale trade

Tämän tutkintotyön tavoitteena on selvittää operatiivista ostotoimintaa, joka sisältää oikea-aikaisen tilausrytmin ja tasapainoisen tilausmäärän määrityksen sekä saapuvan tavaravirran mukauttamisen myyntiin tai kulutukseen kokonaisuutena. Tässä tutkimuksessa tarkastellaan myös varastojen merkitystä ja ostotoiminnan kannalta keskeisimpiä tehokkaaseen varastonohjaukseen liittyviä tunnuslukuja. Tutkimus sisältää lääkkeiden toimitusketjun kuvauksen, koska se poikkeaa merkittävästi muista toimialoista. Tämä tutkintotyö on syntetisoiva kirjallisuustutkimus. Tutkintotyön empiirisessä osassa analysoidaan aluksi case-yrityksen vaihto-omaisuusvaraston ohjausta ostotoiminnan näkökulmasta ABC analyysiin pohjautuen. Tämän jälkeen ostotoimintaa analysoidaan tarkemmin tiettyjen toimittajien osalta. Lopuksi laaditaan optimaalinen tilausrytmi ja tilausmäärät sekä ostobudjetti yhden toimittajan tuotteille. ABC analyysia voidaan hyödyntää työkaluna määriteltäessä miten erilaisten tuotteiden materiaalivirtoja tulisi ostotoiminnan kannalta ohjata. Analyysi perustuu resurssien keskittämiseen sinne missä tuotto on suurin.

Characterization of volatile organic gunshot residues in fired handgun cartridges by headspace sorptive extraction

In forensic investigation of firearm-related cases, determination of the residual amount of volatile compounds remaining inside a cartridge could be useful in estimating the time since its discharge. Published approaches are based on following the decrease of selected target compounds as a function of time by using solid phase micro-extraction (SPME). Naphthalene, as well as an unidentified decomposition product of nitrocellulose (referred to as "TEA2"), are usually employed for this purpose. However, reliability can be brought into question given their high volatility and the low reproducibility of their extracted quantities. In order to identify alternatives and therefore develop improved dating methods, an extensive study on the composition and variability of volatile residues in nine different types of cartridges was carried out. Analysis was performed using headspace sorptive extraction (HSSE), which is a more exhaustive technique compared to SPME. 166 compounds were identified (several of which for the first time), and it was observed that the final compositional characteristics of each residue were strongly dependent on its source. Variability of single identified compounds within and between different types of cartridge, as well as their evolution over time, was also studied. Many explosion products containing up to 4 aromatic rings were found to be globally present in high proportions amongst residues. 27 of them (excluding naphthalene) also presented detectable decreases during the first 24 h. Therefore, they could be used as complementary target analytes in future dating methods.

Building legitimacy by criticising the pharmaceutical industry: a qualitative study among prescribers and local opinion leaders.

PRINCIPLES: The literature has described opinion leaders not only as marketing tools of the pharmaceutical industry, but also as educators promoting good clinical practice. This qualitative study addresses the distinction between the opinion-leader-as-marketing-tool and the opinion-leader-as-educator, as it is revealed in the discourses of physicians and experts, focusing on the prescription of antidepressants. We explore the relational dynamic between physicians, opinion leaders and the pharmaceutical industry in an area of French-speaking Switzerland. METHODS: Qualitative content analysis of 24 semistructured interviews with physicians and local experts in psychopharmacology, complemented by direct observation of educational events led by the experts, which were all sponsored by various pharmaceutical companies. RESULTS: Both physicians and experts were critical of the pharmaceutical industry and its use of opinion leaders. Local experts, in contrast, were perceived by the physicians as critical of the industry and, therefore, as a legitimate source of information. Local experts did not consider themselves opinion leaders and argued that they remained intellectually independent from the industry. Field observations confirmed that local experts criticised the industry at continuing medical education events. CONCLUSIONS: Local experts were vocal critics of the industry, which nevertheless sponsor their continuing education. This critical attitude enhanced their credibility in the eyes of the prescribing physicians. We discuss how the experts, despite their critical attitude, might still be beneficial to the industry's interests.

Reuse of information for selection of methods and operating conditions for drying of pharmaceutical materials

Drying is a major step in the manufacturing process in pharmaceutical industries, and the selection of dryer and operating conditions are sometimes a bottleneck. In spite of difficulties, the bottlenecks are taken care of with utmost care due to good manufacturing practices (GMP) and industries' image in the global market. The purpose of this work is to research the use of existing knowledge for the selection of dryer and its operating conditions for drying of pharmaceutical materials with the help of methods like case-based reasoning and decision trees to reduce time and expenditure for research. The work consisted of two major parts as follows: Literature survey on the theories of spray dying, case-based reasoning and decision trees; working part includes data acquisition and testing of the models based on existing and upgraded data. Testing resulted in a combination of two models, case-based reasoning and decision trees, leading to more specific results when compared to conventional methods.

Rapid analysis of multiclass antibiotic residues and some of their metabolites in hospital, urban wastewater and river water by ultra-highperformance liquid chromatography coupled to quadrupole-linear ion trap tandem mass spectrometry

The present work describes the development of a fast and robust analytical method for the determination of 53 antibiotic residues, covering various chemical groups and some of their metabolites, in environmental matrices that are considered important sources of antibiotic pollution, namely hospital and urban wastewaters, as well as in river waters. The method is based on automated off-line solid phase extraction (SPE) followed by ultra-high-performance liquid chromatography coupled to quadrupole linear ion trap tandem mass spectrometry (UHPLC–QqLIT). For unequivocal identification and confirmation, and in order to fulfill EU guidelines, two selected reaction monitoring (SRM) transitions per compound are monitored (the most intense one is used for quantification and the second one for confirmation). Quantification of target antibiotics is performed by the internal standard approach, using one isotopically labeled compound for each chemical group, in order to correct matrix effects. The main advantages of the method are automation and speed-up of sample preparation, by the reduction of extraction volumes for all matrices, the fast separation of a wide spectrum of antibiotics by using ultra-high-performance liquid chromatography, its sensitivity (limits of detection in the low ng/L range) and selectivity (due to the use of tandem mass spectrometry) The inclusion of β-lactam antibiotics (penicillins and cephalosporins), which are compounds difficult to analyze in multi-residue methods due to their instability in water matrices, and some antibiotics metabolites are other important benefits of the method developed. As part of the validation procedure, the method developed was applied to the analysis of antibiotics residues in hospital, urban influent and effluent wastewaters as well as in river water samples

LC-MS method development and comparison of sampling materials for the analysis of organic gunshot residues

This study aimed at comparing the efficiency of various sampling materials for the collection and subsequent analysis of organic gunshot residues (OGSR). To the best of our knowledge, it is the first time that sampling devices were investigated in detail for further quantitation of OGSR by LC-MS. Seven sampling materials, namely two "swab"-type and five "stub"-type collection materials, were tested. The investigation started with the development of a simple and robust LC-MS method able to separate and quantify molecules typically found in gunpowders, such as diphenylamine or ethylcentralite. The evaluation of sampling materials was then systematically carried out by first analysing blank extracts of the materials to check for potential interferences and determining matrix effects. Based on these results, the best four materials, namely cotton buds, polyester swabs, a tape from 3M and PTFE were compared in terms of collection efficiency during shooting experiments using a set of 9 mm Luger ammunition. It was found that the tape was capable of recovering the highest amounts of OGSR. As tape-lifting is the technique currently used in routine for inorganic GSR, OGSR analysis might be implemented without modifying IGSR sampling and analysis procedure.