Oxidation-reduction potential and its influence on Cheddar cheese quality

Oxidation-reduction (redox) potential is a fundamental physicochemical parameter that affects the growth of microorganisms in dairy products and contributes to a balanced flavour development in cheese. Even though redox potential has an important impact on the quality of dairy products, it is not usually monitored in dairy industry. The aims of this thesis were to develop practical methods for measuring redox potential in cheese, to provide detailed information on changes in redox potential during the cheesemaking and cheese ripening and how this parameter is influenced by starter systems and to understand the relationship between redox potential and cheese quality. Methods were developed for monitoring redox potential during cheesemaking and early in ripening. Changes in redox potential during laboratory scale manufacture of Cheddar, Gouda, Emmental, and Camembert cheeses were determined. Distinctive kinetics of reduction in redox potential during cheesemakings were observed, and depended on the cheese technology and starter culture utilised. Redox potential was also measured early in ripening by embedding electrodes into Cheddar cheese at moulding together with the salted curd pieces. Using this approach it was possible to monitor redox potential during the pressing stage. The redox potential of Emmental cheese was also monitored during ripening. Moreover, since bacterial growth drives the reduction in redox potential during cheese manufacture and ripening, the ability of Lactococcus lactis strains to affect redox potential was studied. Redox potential of a Cheddar cheese extract was altered by bacterial growth and there were strain-specific differences in the nature of the redox potential/time curves obtained. Besides, strategies to control redox potential during cheesemaking and ripening were developed. Oxidizing or reducing agents were added to the salted curd before pressing and results confirmed that a negative redox potential is essential for the development of sulfur compounds in Cheddar cheese. Overall, the studies described in this thesis gave an evidence of the importance of the redox potential on the quality of dairy products. Redox potential could become an additional parameter used to select microorganisms candidate as starters in fermented dairy products. Moreover, it has been demonstrated that the redox potential influences the development of flavour component. Thus, measuring continuously changes in redox potential of a product and controlling, and adjusting if necessary, the redox potential values during manufacture and ripening could be important in the future of the dairy industry.

Studies on the texture, functionality, rheology and sensory properties of Cheddar and Mozzarella cheeses

The effect of fortification of skim milk powder and sodium caseinate on Cheddar cheeses was investigated. SMP fortification led to decreased moisture, increased yield, higher numbers of NSLAB and reduced proteolysis. The functional and texture properties were also affected by SMP addition and formed a harder, less meltable cheese than the control. NaCn fortification led to increased moisture, increased yield, decreased proteolysis and higher numbers of NSLAB. The functional and textural properties were affected by fortification with NaCn and formed a softer cheese that had similar or less melt than the control. Reducing the lactose:casein ratio of Mozzarella cheese by using ultrafiltration led to higher pH, lower insoluble calcium, lower lactose, galactose and lactic acid levels in the cheese. The texture and functional properties of the cheese was affected by varying the lactose:casein ratio and formed a harder cheese that had similar melt to the control later in ripening. The flavour and bake properties were also affected by decreased lactose:casein ratio; the cheeses had lower acid flavour and blister colour than the control cheese. Varying the ratio of αs1:β-casein in Cheddar cheese affected the texture and functionality of the cheese but did not affect insoluble calcium, proteolysis or pH. Increasing the ratio of αs1:β-casein led to cheese with lower meltability and higher hardness without adverse effects on flavour. Using camel chymosin in Mozzarella cheese instead of calf chymosin resulted in cheese with lower proteolysis, higher softening point, higher hardness and lower blister quantity. The texture and functional properties that determine the shelf life of Mozzarella were maintained for a longer ripening period than when using calf chymosin therefore increasing the window of functionality of Mozzarella. In summary, the results of the trials in this thesis show means of altering the texture, functional, rheology and sensory properties of Mozzarella and Cheddar cheeses.

The influence of gender in the direction of Spanish cooperative societies on profitability and indebtedness: an empirical analysis

In this paper the claim for the market for a new business management to ensure the presence of women in decision -making to respond to new social needs addressed. Thus, this paper analyzes the influence of gender diversity of the directors on the profitability and the level of debt for a sample of 5,199 Spanish cooperatives. Unlike capitalist societies, these organizations have a number of peculiarities in their government, and that the partners are themselves major time, agents and customers. The study focuses on the Spanish context, where there is an open debate on the importance of women's business management, as in other countries, driven by the proliferation of legislation on gender equality, being, in addition, Spain, the pioneer in having specific legislation on Social Economy. The results show that cooperatives with greater female representation in theirs Boards have higher profitability. On the other hand, those Boards with a higher percentage of women show a lower level of indebtedness.

Evaluation of Serpa cheese proteolysis by nitrogen content and capillary zone electrophoresis

Proteolysis of Serpa cheese produced traditionally (B) and semi-industrially (C) was evaluated for the first time by determination of nitrogen content and capillary zone electrophoresis (CZE). A citrate dispersion of cheese was fractionated to determine the nitrogen in pH 4.4, trichloroacetic and phosphotungstic acid soluble fractions (pH 4.4-SN, TCA-SN and PTA-SN, respectively). The pH 4.4-SN was significantly higher for B ( P <0.001), while TCA-SN was significantly higher for C ( P <0.001). PTA-SN was also higher for C but at 60 days ripening no significant difference was found between B and C. Degradation of alpha(s1) - and beta-caseins evaluated by CZE was in good agreement with the maturation index (pH 4.4-SN/TN).

A new approach for the detection of ethylene using silica-supported palladium complexes

The coordination of olefins to square-planar Pd(II) and Pt(II) complexes containing 2,9-dimethylphenanthroline (L1) often involves a change of color associated with a change of geometry at the metal center. In order to obtain suitable colorimetric detectors for ethylene gas, a series of new Pd(II) and Pt(II) compounds with a range of 2,9-disubstituted phenanthroline ligands [2,9-di-n-butyl-1,10-phenanthroline (L-2), 2,9-di-s-butyl-1,10-phenanthroline (L3), 2,9-diphenyl-1,10-phenanthroline (L4), and 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bathocuproine, L5)] have been prepared and their reactivity toward ethylene investigated both in solution and after depositing the detector compounds on a variety of solid supports. The Pd(II) complex [PdCl2(L2)] supported on silica undergoes a clear color change upon exposure to ethylene, while remaining stable toward air and water, and forms the basis for new simple colorimetric detectors with potential applications in ethylene pipe-leak detection and the monitoring of fruit ripening. Encouragingly, the detector is able to discriminate between fruit at different stages of ripening. The response of the detector to other volatiles was also examined, and specific color changes were also observed upon exposure to aromatic acetylenes. The crystal structures of four new derivatives, including the ethylene-Pt(II) complex [PtCl2(C2H4)(L2)], are also described.

El significado de la prosopopeya de las Leyes en el "Critón" de Platon

El objeto de este trabajo es realizar un estudio iusfilosófico sobre la aparición de las Leyes (nómoi) personificadas de Atenas en el Critón de Platón. La prosopopeya de las Leyes resulta ser un aspecto central para poder comprender la obra, ya que éstas entablan un diálogo imaginario con Sócrates en el cual instalan diversos argumentos filosóficos para fundamentar la autoridad de la pólis. A los fines de identificar el valor argumentativo de este recurso en la obra, analizaré el significado del nómos en la Atenas del siglo V a. C. y la naturaleza de las Leyes en el contexto general del diálogo. Se busca demostrar la importancia que tienen aquéllas para explicar la decisión de Sócrates de beber la cicuta.

Bovine Serum Albumin Adsorption to Iron-Oxide Coated Sands Can Change Microsphere Deposition Mechanisms

Particulate colloids often occur together with proteins in sewage-impacted water. Using Bovine Serum Albumin (BSA) as a surrogate for protein in sewage, column experiments investigating the capacity of iron-oxide coated sands to remove latex microspheres from water revealed that microsphere attenuation mechanisms depended on antecedent BSA coverage. Dual pulse experiment (DPE) results suggested that where all BSA was adsorbed, subsequent multiple pore volume microsphere breakthrough curves reflected progressively reduced colloid deposition rates with increasing adsorbed BSA content. Modelling colloid responses suggested adsorption of 1 µg BSA generated the same response as blockage by between 7.1x108 and 2.3x109 deposited microspheres. By contrast, microsphere responses in DPEs where BSA coverage of the deposition sites approached/ reached saturation revealed the coated sand maintained a finite capacity to attenuate microspheres, even when incapable of further BSA adsorption. Subsequent microsphere breakthrough curves demonstrated the matrix’s colloid attenuation capacity progressively increased with continued microsphere deposition. Experimental findings suggested BSA adsorption on the sand surface approaching/ reaching saturation generated attractive deposition sites for colloids, which became progressively more attractive with further colloid deposition (filter ripening). Results demonstrate that adsorption of a single type of protein may either enhance or inhibit colloid mobility in saturated porous media.

Quantifying mircoorganism/organic matter interactions in saturated porous media.

Proteins and humic acids are common constituents of waste water. Latex colloids (colloids) acted as surrogates for microorganisms in multiple pulse dynamic column experiments (MPEs) that permitted colloid mobility to be quantified before and after the injection of either BSA (a protein), or Suwannee River humic acid (SRHA).
At low OM coverage colloid breakthrough curves demonstrated both BSA and SRHA reduced colloid deposition rates, but did not affect colloid irreversible deposition mechanisms. By contrast, high levels of SRHA surface coverage not only further reduced the matrix’s ability to attenuate colloids, but also resulted in reversible adsorption of a significant fraction of colloids deposited. Modelling of colloid responses using random sequential adsorption modelling suggested that 1 microgram of SRHA had the same effect as the deposition of 5.90±0.14 x109 colloids; the model suggested that adsorption of the same mass of BSA was equivalent to the deposition of between 7.1x108 and 2.3x109 colloids.
Colloid responses in MPEs where BSA coverage of colloid deposition sites approached saturation demonstrated the sand matrix remained capable of adsorbing colloids. However, in contrast to responses observed in MPEs at low surface coverage, continued colloid injection showed that the sand’s attenuation capacity increased with time, i.e. colloid concentrations declined as more were deposited (filter ripening).
Importance: Study results highlight the contrasting responses that may arise due to the interactions between colloids and OM in porous media. Results not only underscore that colloids can interact differently with various forms of deposited OM, but also that a single type of OM may generate dramatically different responses depending on the degree of surface coverage. The MPE method provides a means of quantifying the influence of OM on microorganism mobility in porous media such as filter beds, which may be used for either drinking water treatment or waste water treatment. In the wider environment study findings have potential to allow more confident predictions of the mobility of sewage derived pathogens discharging to groundwater.

Modeling colloid deposition on a protein layer adsorbed to iron-oxide-coated sand

Our recent study reported that conformation change of granule-associated Bovine Serum Albumin (BSA) may influence the role of the protein controlling colloid deposition in porous media (Flynn et al., 2012). The present study conceptualized the observed phenomena with an ellipsoid morphology model, describing BSA as an ellipsoid taking a side-on or end-on conformation on granular surface, and identified the following processes: (1) at low adsorbed concentrations, BSA exhibited a side-on conformation blocking colloid deposition; (2) at high adsorbed concentrations, BSA adapted to an end-on conformation promoted colloid deposition; and (3) colloid deposition on the BSA layer may progressively generate end-on molecules (sites) by conformation change of side-on BSA, resulting in sustained increasing deposition rates. Generally, the protein layer lowered colloid attenuation by the porous medium, suggesting the overall effect of BSA was inhibitory at the experimental time scale. A mathematical model was developed to interpret the ripening curves. Modeling analysis identified the site generation efficiency of colloid as a control on the ripening rate (declining rate in colloid concentrations), and this efficiency was higher for BSA adsorbed from a more dilute BSA solution. © 2012 Elsevier B.V.

Comparing the influence of two different natural organic matter types on colloid deposition in saturated porous medium

Humic acid and protein are two major organic matter types encountered in natural and polluted environment, respectively. This study employed Triple Pulse Experiments (TPEs) to investigate and compare the influence of Suwannee River Humic Acid (SRHA) (model humic acid) and Bovine Serum Albumin (BSA) (model protein) on colloid deposition in a column packed with saturated iron oxide-coated quartz sand. Study results suggest that adsorbed SRHA may inhibit colloid deposition by occupying colloid sites on the porous medium. Conversely, BSA may promote colloid deposition by a 'filter ripening' mechanism. This study provides insight to understand the complex behavior of colloids in organic matter-presented aquifers and sand filters. © (2012) Trans Tech Publications, Switzerland.

Comportamento pós-colheita da ameixa 'Raínha Cláudia Verde' Prunus domestica L. : efeitos do cálcio na maturação

`Rainha Cláudia Verde' é uma antiga variedade da ameixeira europeia Prunus domestica L. que se encontra bem adaptada a uma zona restrita do Alto Alentejo. Esta variedade é utilizada para o consumo em fresco e na doçaria regional, onde se emprega na confecção das famosas 'Ameixas D'Elvas'. A confitagem é a técnica utilizada na confecção deste produto com denomicação de origem protegida, e que faz parte de um saber tradicional muito divulgado na região. As informações que resultam de evidências práticas mostram que nem todos os frutos reagem da mesma forma à fase da cozedura. Existem zonas específicas que produzem frutos que não se adequara processo da confitagem, apresentando uma textura imprópria após a cozedura. Recentemente, e com o aumento das áreas produtoras, verificou-se que os frutos destas regiões específicas para além de inadequados para a cozedura, também apresentavam uma menor capacidade de conservação em fresco. Assim durante a conservação estes frutos, quando comparados com os das outras regiões, apresentavam uma perda de firmeza mais rápida tornando-se mais difíceis de comercializar. Entre os factores culturais que contribuem para a qualidade pós-colheita dos frutos, o teor de cálcio presente no solo e nos frutos apresenta-se corno um dos mais importantes. O cálcio é um dos nutrientes que mais frequentemente é associado à manutenção da estrutura das paredes celulares das plantas, estando envolvido directamente na redução das perdas de textura dos frutos. Tendo em consideração os aspectos anteriormente referidos, foi delineado um trabalho que teve início com a selecção de dois pomares geograficamente distantes, e que tradicionalmente produziam frutos com diferentes comportamentos quer durante a conservação quer durante a confitagem. Associada ao conhecimento empírico, a prévia indicação de que estes pomares apresentavam concentrações cle cálcio foliar significativamente diferentes, contribuiu também para a sua selecção. O objectivo geral desta tese foi o de investigar o comportamento pós-colheita da `Rainha Cláudia Verde' particularmente a influência do cálcio na textura dos frutos. Definiram-se os seguintes objectivos específicos: (1) determinar a influência do porta-enxerto e do solo na concentração de cálcio dos frutos e as respectivas consequências, no seu comportamento pós-colheita; (2) seleccionar um método que permitisse avaliar a produção de etileno dos frutos e consequentemente a atribuição da designação de fruto climatérico ou não climatérico a esta variedade; (3) avaliar os e Feitos durante a conservação, de diferentes níveis de cálcio nos frutos; (4) quantificar nos frutos os níveis de cálcio da parede celular e avaliar a sua influência na firmeza dos frutos; (5) seleccionar as melhores temperaturas de conservação para os frutos desta variedade. Os resultados apresentados nesta tese indicam que a variedade 'Rainha Cláudia Verde' é uma variedade de frutos climatéricos que apresentam uma acentuada perda de textura após a colheita. Durante a conservação frigorífica os frutos apresentaram comportamentos diferentes, de acordo com a sua origem. Os frutos com origem no pomar que tradicionalmente não produz frutos aptos a serem confitados, apresentam simultaneamente uma mais rápida perda de firmeza quando comparados com os frutos dos outros pomares. Sendo que o menor teor de cálcio nos frutos leva a que a diminuição da firmeza da polpa ocorra mais rapidamente. No entanto à colheita não se observaram diferenças significativas da firmeza da polpa dos frutos. Esta informação parece indicar que outros factores, além do nível de cálcio dos frutos, poderão estar implicados na firmeza revelada à colheita. Por outro lado os frutos com epiderme revelaram diferenças de firmeza nos testes efectuados à colheita. O efeito da epiderme na firmeza dos frutos à colheita parece indicar que outros factores tais como o estado de hidratação dos frutos poderão contribuir para o aumento desta característica dos frutos. Apesar do teor de cálcio dos frutos melhorar o seu comportamento durante a conservação, a sua influência na emissão de etileno não foi evidente. O aumento do teor de cálcio nos frutos pode conseguir-se através de uma selecção adequada do porta-enxerto. Os porta-enxertos estudados induziram quantidades diferentes de cálcio nos frutos, aparentemente contribuindo o vigor do porta-enxerto para um efeito de diluição do cálcio na árvore. O estudo da influência do solo no teor do cálcio dos frutos revelou que os frutos com menor capacidade de conservação provinham de solos com maiores teores de cálcio, e que na sua constituição apresentavam uma menor concentração de cálcio na polpa. Apresenta-se ainda a hipótese de que o excesso de potássio presente nestes solos possa ter contribuído para um menor teor de cálcio nos frutos. De facto os frutos com uma razão Ca/K superior apresentaram também uma firmeza superior./ ABSTRACT - `Raínha Claudia Verde' is an old variety of Prunus domestica which is well adapted to a restrict zone of Alto Alentejo in the south region of Portugal. This variety is much appreciated either as a fresh fruit or as a sweet candy. The candying process is a widespread technique in this region with much empirical knowledge. There are practical evidences which indicate that fruits origin may influence the boiling process. Some fruits produced in specific areas in this region had an inadequate behaviour during boiling, becoming to soft and improper to use in canding. More recently it has been also observed that these specific areas produced fruits with a poor postharvest behaviour. During storage these fruits loose texture very quickly and became improper to commercialize. Many pre and postharvest factors may contribute to differences in fruit quality. calcium is one of most important nutrients which have a major effect on cell wall structure and membrane integrity. Studies on the role of calcium in fruits indicate its involvement in delaying changes associated with softening. Two orchards were selected because of their history of producing fruits with different characteristics either as a fresh or as a processed fruit, and because induced different calcium levels in the leaves. The main focus of this research work was to study the influence of the production region in fruit postharvest behaviour, specially the influence of calcium in fruit texture. The aims were: (1) to compare the rootstock and the soil influence on calcium fruit content, (2) to select a method- to measure the production of ethylene in fruits of 'Raínha Claudia Verde' (3) to evaluate the effects of different calcium fruit content in the postharvest behaviour of fruits (4) to evaluate the cell wall calcium content and its influence in fruit firmness, (5) and to select the best cold storage temperatures to this variety. It was found that 'Raínha Claudia Verde' is a climacteric variety and the studies on fruit firmness revealed a significant loss of fruit texture during ripening on or off the tree. During storage, fruits had a different behaviour depending on fruits origin. Usually fruits, which traditionally do not resist to boiling process, also exhibited an early softening, when compared to other fruits produced in adequate regions. The excessive fruit softening after harvest occurred in fruits with lower calcium content. However, at harvest, fruits from both orchards exhibited a similar firmness which may indicate that other factors besides calcium should be implicated in fruit firmness at harvest. In spite of a better postharvest behaviour of fruits with higher calcium content, it was not evident the calcium influence in the climacteric rise. The increase of calcium fruit content can be achieved with a proper rootstock selection. The rootstocks investigated in this study, induced different calcium fruit content, apparently vigorous rootstocks contributed to the dilution of calcium fruit level. The soil with higher calcium content induced a lower calcium fruit content, which may be due to the excess of potassium in this soil; in fact fruits with higher Ca/K ratio reached higher firmness values. It is also proposed a method to evaluate the calcium content in the fruit independently of fruit mass. The calcium fruit content is usually expressed as a percentage of dry mass, however during the course of fruit development there are a huge increment of fruit weight because of water and sugar mobilization into the fruit. Most of the total calcium in the plants is associated with the cell wall which means that calcium fruit content expressed as a percentage of cell wall fraction is a much more reliable method. Orchards with an excess of potassium in the soil produced fruits with a significant lower calcium fruit content. However it was not possible to prove the gradually firmness decrease during the harvest period as a consequence of calcium fruit loss. In fact, it was not evident a gradual decrease of calcium fruit content during the harvest dates thus it was impossible to find at harvest, a good correlation between fruit firmness and calcium fruit content. The analysis of cell wall polysaccharides evaluated during ripening in the tree showed a slight increase of more branched polysaccharides as ripening went. The small changes in pectic polysaccharides during the harvest season are in accordance with the small decrease in tissue firmness during this period. In this variety the usual storage period is about of 3-4weeks with a temperature of 1-2°C and 90% of relative humidity. However upon rewarming fruits held at 7°C, during 14 days, produced more ethylene at 20°C and exhibited also a higher firmness than fruits held at PC. The reduction of ethylene production and fruit firmness upon rewarming, after fruits being held at lower temperatures, may suggest some chilling injury in this variety.

Influence of Soil and Irrigation Management on the Quality of Seedless Crimson Table Grapes

The market for table grapes is moving into mass production of specialty seed-less grapes in covered areas, aiming at obtaining premium prices with early or late production of high quality products. Production of quality seedless grapes is not straightforward since it is requires the correct combination of various independent characteristics, such as color, sugars, size and quantity at the right moment for successful harvesting and marketing. The present study was carried out at the two largest Portuguese producers located in Alentejo, and has the objective of studying the effect of irrigation management strategies and two different soils on the various relevant parameters for successful production and marketing. The management strategies were the application of ten day stress at the end of the cycle, in order to promote early maturing of the grapes. Three different timings of the stress were applied. Soil moisture, sap flow, bark thickness, as well as leaf water potential, stomatal conductance and chlorophyll content were measured regularly during the production season. The results indicate that the roots explore a rather large soil volume and the plants can successfully withstand reasonable periods of drought without significant changes to the plant physiology. Additionally late rains can mask the effect of any farmer applied drought and invalidate any farmer induced stress to the plants. Water-logged soils tend to cause early onset of maturity, but cause the ripening stage to extend over a longer period of time, and thus, in effect result in a delay in the harvest date. Topography also has some effect on the ripening, since hot air tends to accumulate under the plastic at the higher areas of the field. This work is funded by PRODER, 4.1, within the scope of project MORECRIMSON

Relação do aroma e da espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos

Os espumantes produzidos segundo o método Champanhês são obtidos após uma segunda fermentação em garrafa. Quando o vinho é vertido no copo, o CO2 produzido é libertado, sendo a espuma formada o resultado da sua interacção com os constituintes do vinho. A quantidade e a estabilidade da espuma do vinho espumante estão relacionadas com a sua composição química. Para além da espuma, o aroma é também um parâmetro importante de qualidade na apreciação geral de um vinho espumante. O aroma de um vinho espumante provém do contributo das uvas assim como do processo fermentativo. Dependendo do estado de maturação da uva, o contributo dos compostos voláteis para o aroma é diferente. Em virtude da vindima para os vinhos espumantes ser realizada antes da vindima para os vinhos maduros, dependendo da variedade, as uvas poderão não ser colhidas na expressão máxima do seu aroma, podendo verificar-se uma perda significativa do seu potencial varietal volátil. O objectivo desta dissertação é relacionar o aroma e a espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos. Para isso, foi estudada a composição volátil das duas castas principais da Bairrada, a casta branca Fernão-Pires (FP) e a casta tinta Baga (BG), sendo estas duas das castas usadas para a produção de espumante. Para estudar a composição volátil das uvas durante a maturação, com vista a avaliar este efeito na expressão máxima de compostos voláteis, foi optimizada para este propósito a metodologia de microextracção em fase sólida em espaço de cabeça (HS-SPME). As uvas foram colhidas semanalmente, em duas vinhas, do pintor à pós-maturidade sendo posteriormente analisadas pela metodologia de HS-SPME seguida de cromatografia de gás acoplada à espectrometria de massa com quadrupolo (GC–qMS). No caso das uvas BG, observou-se um aumento acentuado na expressão máxima de compostos voláteis próximo da maturidade da uva determinada pelo teor em açúcar e acidez titulável, mantendo-se constante durante a pós-maturidade. Na determinação do perfil volátil das uvas ao longo da maturação foram identificados 66 compostos varietais nas uvas provenientes de uma vinha (Pedralvites) e 45 da outra vinha (Colégio). Em ambas as vinhas foram identificados 23 sesquiterpenóides, 13 monoterpenóides, 6 norisoprenóides, 2 álcoois aromáticos e 1 diterpenóide. Os sesquiterpenóides, devido à sua abundância em número e em área cromatográfica, podem ser considerados marcadores da casta BG. As uvas FP apresentaram um comportamento diferente do das uvas BG, sendo a expressão máxima de compostos voláteis expressa durante um curto período de tempo (1 semana), que coincide com a maturidade da uva. Depois de atingido este pico, observa-se uma diminuição drástica logo na semana seguinte. Este comportamento foi observado em ambas as vinhas, onde foram identificados 20 compostos voláteis varietais e 5 pré-fermentativos (álcoois e aldeídos em C6). Estes resultados mostram que quando estas castas são colhidas precocemente (1 semana antes da maturidade) para a produção de espumante, é observada uma redução significativa do potencial volátil que é expresso na maturidade. Para a análise da composição volátil dos vinhos espumantes foi optimizada uma metodologia de microextracção que permite usar uma maior quantidade de fase estacionária, a extracção sorptiva em barra de agitação (SBSE). O método foi optimizado usando 10 padrões de compostos voláteis representativos das principais famílias químicas presentes no vinho, nomeadamente, ésteres, monoterpenóides, sesquiterpenóides, norisoprenóides em C13 e álcoois. O método proposto apresenta uma boa linearidade (r2 > 0,982) e a reprodutibilidade varia entre 8,9 e 17,8%. Os limites de detecção para a maioria dos compostos é bastante baixo, entre 0,05 e 9,09 μg L-1. O método foi aplicado para a análise da composição volátil dos vinhos espumantes. Dentro dos vinhos espumantes analisados, foi estudada a influência da casta, do tipo de solo e do estado de maturação das uvas na sua composição volátil. A casta FP pode dar origem a vinhos com maior potencial de aroma do que a casta BG. Relativamente à avaliação dos diferentes estados de maturação, verificou-se que as uvas da maturidade e as da colheita tardia (uma semana depois da maturidade) deram origem aos vinhos com maior quantidade de compostos voláteis. Para os três tipos de solo estudados (arenoso, argiloso e argilo-calcário), o vinho obtido a partir de uvas colhidas no solo argilo-calcário foi o que mostrou a maior concentração de compostos voláteis varietais. A espuma destes vinhos espumantes foi também avaliada quanto à sua quantidade máxima (HM) e tempo de estabilidade (TS). O vinho espumante que apresentou um maior TS foi o vinho produzido a partir da casta FP proveniente de uma colheita tardia e solo argiloso. Os vinhos provenientes dos solos arenosos e argilo-calcários são os que apresentaram valores mais baixos de TS. Com vista a avaliar quais os conjuntos de moléculas do vinho que estão relacionados com as propriedades da espuma e possíveis sinergismos entre eles, para cada vinho espumante foi separada a fracção hidrofóbica de baixo peso molecular (MeLMW), a fracção de elevado peso molecular (HMW) e duas fracções de peso molecular intermédio (AqIMW e MeIMW). As propriedades da espuma dos vinhos modelo, reconstituídos com estas fracções e suas misturas, foram avaliadas. A combinação da fracção HMW com a MeLMW aumentou o TS 2,7 vezes quando comparado com o observado para a fracção HMW isoladamente, produzindo um efeito sinergético. Este aumento do TS ainda foi maior quando se combinou a fracção HMW com as subfracções obtidas a partir da fracção MeLMW, principalmente para as fracções menos apolares. A subfracção hidrofóbica menos apolar foi caracterizada por espectrometria de massa de ionização por electrospray (ESI-MS/MS) tendo sido identificada uma série de oligómeros de polietileno glicol e um potencial composto tensioactivo, o 8-hidroxi-tridecanoato de dietilenoglicolglicerilacetato. A fracção MeLMW foi também isolada da espuma do vinho espumante e caracterizada por ESI-MS/MS, permitindo identificar vários compostos potenciais tensioactivos, nomeadamente, dois monoacilgliceróis e quatro derivados de ácidos gordos com gliceriletilenoglicol. Estes resultados confirmam que estes compostos relacionados com a estabilidade da espuma existem em maior número na espuma do que no vinho. O vinho foi ainda fraccionado em 12 grupos de moléculas: 3 fracções de manoproteínas, 3 de arabinogalactanas, 3 de misturas de polissacarídeos, proteínas e compostos fenólicos e 3 fracções de peso molecular intermédio e baixo, compostas por uma mistura de hidratos de carbono, peptídeos e compostos fenólicos. Foram usados vinhos modelo reconstituídos com cada uma das fracções isoladas na concentração em que estas se encontraram no vinho. Foram também efectuados ensaios com soluções modelo dez vezes mais concentradas e com misturas de algumas das fracções. Todas as soluções formadas foram avaliadas quanto às propriedades da espuma. O aumento da concentração para dez vezes faz com que a solução contendo a fracção rica em manoproteínas (MP1) aumente para mais do dobro a HM e 7,4 vezes mais o TS. A combinação entre a fracção MP1 e a MeLMW produziu um aumento significativo nos parâmetros de HM e TS. A combinação da fracção HMW (manoproteínas com baixo teor em proteína) com a MeLMW (tensioactivos derivados de ácidos gordos com gliceriletilenoglicol) contém os compostos chave de um vinho espumante para se obter uma maior quantidade e estabilidade da espuma.

Caracterização fisiológica e nutritiva da clorose férrica em citrinos

Tese dout., Ciências Agrárias, Produção Vegetal, Unidade de Ciências e Tecnologias Agrárias, Universidade do Algarve, 2000

Release of Bet v 1 from Birch Pollen 1 from 5 European 2 Countries. Results from the HIALINE Study

Exposure to allergens is pivotal in determining sensitization and allergic symptoms in individuals. Pollen grain counts in ambient air have traditionally been assessed to estimate airborne allergen exposure. However, the exact allergen content of ambient air is unknown. We therefore monitored atmospheric concentrations of birch pollen grain and the matched major birch pollen allergen Bet v 1 simultaneously across Europe within the EU-funded project HIALINE (Health Impacts of Airborne Allergen Information Network). Pollen count was assessed with Hirst type pollen traps at 10 l/min at sites in France, United Kingdom, Germany, Italy and Finland. Allergen concentrations in ambient air were sampled at 800l/min with a Chemvol high-volume cascade impactor equipped with stages PM>10μm, 10 μm>PM>2.5μm, and in Germany also 2.5 μm>PM>0.12μm. The major birch pollen allergen Bet v 1 was determined with an allergen specific ELISA. Bet v 1 isoform patterns were analyzed by 2D-SDS-PAGE blots and mass spectrometric identification. Basophil activation was tested in an FcεR1-humanized rat basophil cell line passively sensitized with serum of a birch pollen lmptomatic patient. Compared to 10 previous years, 2009 was a representative birch pollen season for all stations. About 90% of the allergen was found in the PM>10μm fraction at all stations. Bet v 1 isoforms pattern did not varied substantially neither during ripening of pollen nor between different geographical locations. The average European allergen release from birch pollen was 3.2 pg Bet v 1/pollen and did not vary much between the European countries. However, in all countries a >10-fold difference in daily allergen release per pollen was measured which could be explained by long range transport of pollen with a deviating allergen release. Basophil activation by ambient air extracts correlated better with airborne allergen than with pollen concentration. Although Bet v 1 is a mixture of different isoforms, its fingerprint is constant across Europe. Bet v 1 was also exclusively linked to pollen. Pollen from different days varied >10-fold in allergen release. Thus exposure to allergen is inaccurately monitored by only monitoring birch pollen grains. Indeed, a humanized basophil activation test correlated much better with allergen concentrations in ambient air than with pollen count. Monitoring the allergens themselves together with pollen in ambient air might be an improvement in allergen exposure assessment.