Aux sources de l'orthopédie clinique : l'histoire revisitée de Jean-André Venel, "père de l'orthopédie" (fin XVIIIe-début XIXe siècle)

(ENGLISH VERSION BELOW) En 1780, le médecin Jean-André Venel fonde à Orbe, dans le canton de Vaud, le premier institut orthopédique connu dans le monde, proposant une version clinique d'un savoir-faire médical ancestral. A travers des sources qui réactualisent les travaux consacrés à Venel, cet article retrace les origines de son institution et de sa pensée médicale, dans un contexte de production et de diffusion d'un savoir particulier en termes de technique du corps et de médecine de l'enfant. Revisitant la figure légendaire - ou mythique ? - de ce que l'histoire de la médecine a retenu comme étant le « père de l'orthopédie », l'article s'interroge par la même occasion sur les conditions d'émergence d'une spécialité médicale au sortir de l'Ancien Régime, et de son impact dans les premières décennies du XIXe siècle. In 1780, the physician Jean-André Venel creates in Orbe (canton of Vaud) the first orthopedic institute of the world, offering a clinical version of an ancient medical savoir-faire. By using sources that enable us to update the scholarship on Venel, this article traces the origins of his institute and of his medical thought, in the context of the production and diffusion of a specialized knowledge on the body and on children. With this new perspective on the legendary, if not mythical, figure, whom the history of medicine has canonized as the "father of orthopedia", this article also examines the conditions of emergence of a medical specialization at the end of the Ancien Régime and its impact in the first decades of the nineteenth century.

Damage control surgery: it's evolution over the last 20 years

In less than twenty years, what began as a concept for the treatment of exsanguinating truncal trauma patients has become the primary treatment model for numerous emergent, life threatening surgical conditions incapable of tolerating traditional methods. Its core concepts are relative straightforward and simple in nature: first, proper identification of the patient who is in need of following this paradigm; second, truncation of the initial surgical procedure to the minimal necessary operation; third, aggressive, focused resuscitation in the intensive care unit; fourth, definitive care only once the patient is optimized to tolerate the procedure. These simple underlying principles can be molded to a variety of emergencies, from its original application in combined major vascular and visceral trauma to the septic abdomen and orthopedics. A host of new resuscitation strategies and technologies have been developed over the past two decades, from permissive hypotension and damage control resuscitation to advanced ventilators and hemostatic agents, which have allowed for a more focused resuscitation, allowing some of the morbidity of this model to be reduced. The combination of the simple, malleable paradigm along with better understanding of resuscitation has proven to be a potent blend. As such, what was once an almost lethal injury (combined vascular and visceral injury) has become a survivable one.

Arthroscopic treatment of refractory adhesive capsulitis of the shoulder

OBJECTIVE: to evaluate the results of arthroscopic treatment of refractory adhesive capsulitis of the shoulder associated as for improved range of motion after a minimum follow up of six years. METHODS: from August 2002 to December 2004, ten patients with adhesive capsulitis of the shoulder resistant to conservative treatment underwent arthroscopic surgery. One interscalene catheter was placed for postoperative analgesia before the procedure. All were in Phase II, with a minimum follow up of two years. The mean age was 52.9 years (39-66), predominantly female (90%), six on the left shoulder. The time between onset of symptoms and surgical treatment ranged from six to 20 months. Four adhesive capsulitis were found to be primary (40%) and six secondary (60%). RESULTS: the preoperative mean of active anterior elevation was 92°, of external rotation was 10.5° of the L5 level internal rotation; the postoperative ones were 149°, 40° and T12 level, respectively. Therefore, the average gain was 57° for the anterior elevation, 29.5° for external rotation in six spinous processes. There was a significant difference in movements' gains between the pre and post-operative periods (p<0.001). By the Constant Score (range of motion), there was an increase of 13.8 (average pre) to 32 points (average post). CONCLUSION: the arthroscopic treatment proved effective in refractory adhesive capsulitis of the shoulder resistant to conservative treatment, improving the range of joint movements of patients evaluated after a minimum follow up of six years.

Implementation of a perioperative management protocol for patients undergoing orthopedic surgery

OBJECTIVE: To evaluate the initial results after the implementation of perioperative protocol in patients over 60 years of age undergoing surgical treatment for femur fractures.METHODS: We conducted a prospective study of patients older than 60 years who were hospitalized with femur fracture. They were operated under spinal anesthesia and analgesia by lumbar plexus blockade. Data evaluation was performed before arrival in the operating room during surgery, in the post-anesthesia recovery room and in the ward the next morning of the operation.RESULTS: 105 patients underwent various types of surgical corrections of the femur. The hospital stay ranged from three to 86 days. Fasting ranged from 9h15min to 19h30mn. Hypotension occurred in 5.7%. The duration of motor blockade ranged from 1h45min to 5h30imn. Maltodextrin feeding ranged from 50min to 3h45min and the time spent in the post-anesthetic care unit ranged from 50 minutes to 4 hours. Onset of oral intake in the ward ranged from 4hto 8h15min. The duration of anesthesia ranged from 14 to 33 hours. No patient required a urinary catheter, nor was transferred to the ICU. All patients were able to be discharged on the first postoperative day.CONCLUSION: The use of a protocol to accelerate the postoperative period may reduce the fasting time, length of hospital stay and provide faster i discharge n elderly patients with femur fractures.

Topographic anatomical study of the sciatic nerve relationship to the posterior portal in hip arthroscopy

Objective: To evaluate the anatomic topographic relation between the sciatic nerve in relation to the piriform muscle and the posterior portal for the establishment of hip arthroscopy.Methods: We dissected 40 hips of 20 corpses of adult Brazilians, 17 male and three female, six black, six brown and eight white. We studied the anatomical relationship between the sciatic nerve and the piriform muscle with their variations and the distance between the lateral edge of the sciatic nerve and the posterior portal used in hip arthroscopy. We then classified the anatomical alterations found in the path of the sciatic nerve on the piriform muscle.Results: Seventeen corpses had bilateral relationship between the sciatic nerve and the piriform muscle, i.e., type A. We found the following anatomical variations: 12.5% of variant type B; and an average distance between the sciatic nerve and the portal for arthroscopy of 2.98cm. One body had type B anatomical variation on the left hip and type A on the right.Conclusion: the making of the posterior arthroscopic portal to the hip joint must be done with careful marking of the trochanter massive; should there be difficult to find it, a small surgical access is recommended. The access point to the portal should not exceed two centimeters towards the posterior superior aspect of the greater trochanter, and must be made with the limb in internal rotation of 15 degrees.

Profile of hip arthroplasty patients in a teaching hospital

OBJECTIVE: to characterize the epidemiological profile of patients undergoing hip replacement, primary or revisional. METHODS: we conducted a retrospective, descriptive study, including hip arthroplasties performed from January 2009 to June 2012 in a Belo Horizonte teaching hospital, Minas Gerais State - MG, Brazil. Data were analyzed using descriptive statistics. RESULTS: orthopedic procedures represented 45% of the operations at the hospital in the period, 1.4% hip arthroplasties. There were 125 hip replacements, 85 total, 27 partial and 13 reviews. Among the patients, 40% were male and 60% were female. Age ranged between 20 and 102 years, mean and median of 73 and 76 years, respectively. The most frequent diagnosis (82%) was femoral neck fracture by low-energy trauma caused by falling form standing position. In 13 revision operations, 12 required removal of the prosthesis. The infectious complication led to revision in 54% of the time, followed by dislocation (15%), peri-prosthetic fracture (15%) and aseptic loosening (15%). The infection etiologic agent was identified in 43% of occasions. The average length of the prosthesis to a revision operation was eight months. CONCLUSION: patients undergoing hip arthroplasty are elderly, with femoral neck fracture caused by falling form standing position, affecting more women. The incidence of hip prosthesis loosening was 10%. The main cause of the infection was loosening. The incidence of revisional hip arthroplasty was 10% and the incidence of hospital mortality in patients undergoing hip arthroplasty was 7.2%.

Understanding the in vitro dissolution rate of glasses with respect to future clinical applications

Glass is a unique material with a long history. Several glass products are used daily in our everyday life, often unnoticed. Glass can be found not only in obvious applications such as tableware, windows, and light bulbs, but also in tennis rackets, windmill turbine blades, optical devices, and medical implants. The glasses used at present as implants are inorganic silica-based melt-derived compositions mainly for hard-tissue repair as bone graft substitute in dentistry and orthopedics. The degree of glass reactivity desired varies according to implantation situation and it is vital that the ion release from any glasses used in medical applications is controlled. Understanding the in vitro dissolution rate of glasses provides a first approximation of their behavior in vivo. Specific studies concerning dissolution properties of bioactive glasses have been relatively scarce and mostly concentrated to static condition studies. The motivation behind this work was to develop a simple and accurate method for quantifying the in vitro dissolution rate of highly different types of glass compositions with interest for future clinical applications. By combining information from various experimental conditions, a better knowledge of glass dissolution and the suitability of different glasses for different medical applications can be obtained. Thus, two traditional and one novel approach were utilized in this thesis to study glass dissolution. The chemical durability of silicate glasses was tested in water and TRIS-buffered solution at static and dynamic conditions. The traditional in vitro testing with a TRISbuffered solution under static conditions works well with bioactive or with readily dissolving glasses, and it is easy to follow the ion dissolution reactions. However, in the buffered solution no marked differences between the more durable glasses were observed. The hydrolytic resistance of the glasses was studied using the standard procedure ISO 719. The relative scale given by the standard failed to provide any relevant information when bioactive glasses were studied. However, the clear differences in the hydrolytic resistance values imply that the method could be used as a rapid test to get an overall idea of the biodegradability of glasses. The standard method combined with the ion concentration and pH measurements gives a better estimate of the hydrolytic resistance because of the high silicon amount released from a glass. A sensitive on-line analysis method utilizing inductively coupled plasma optical emission spectrometer and a flow-through micro-volume pH electrode was developed to study the initial dissolution of biocompatible glasses. This approach was found suitable for compositions within a large range of chemical durability. With this approach, the initial dissolution of all ions could be measured simultaneously and quantitatively, which gave a good overall idea of the initial dissolution rates for the individual ions and the dissolution mechanism. These types of results with glass dissolution were presented for the first time during the course of writing this thesis. Based on the initial dissolution patterns obtained with the novel approach using TRIS, the experimental glasses could be divided into four distinct categories. The initial dissolution patterns of glasses correlated well with the anticipated bioactivity. Moreover, the normalized surface-specific mass loss rates and the different in vivo models and the actual in vivo data correlated well. The results suggest that this type of approach can be used for prescreening the suitability of novel glass compositions for future clinical applications. Furthermore, the results shed light on the possible bioactivity of glasses. An additional goal in this thesis was to gain insight into the phase changes occurring during various heat treatments of glasses with three selected compositions. Engineering-type T-T-T curves for glasses 1-98 and 13-93 were stablished. The information gained is essential in manufacturing amorphous porous implants or for drawing of continuous fibers of the glasses. Although both glasses can be hot worked to amorphous products at carefully controlled conditions, 1-98 showed one magnitude greater nucleation and crystal growth rate than 13-93. Thus, 13-93 is better suited than 1-98 for working processes which require long residence times at high temperatures. It was also shown that amorphous and partially crystalline porous implants can be sintered from bioactive glass S53P4. Surface crystallization of S53P4, forming Na2O∙CaO∙2SiO2, was observed to start at 650°C. The secondary crystals of Na2Ca4(PO4)2SiO4, reported for the first time in this thesis, were detected at higher temperatures, from 850°C to 1000°C. The crystal phases formed affected the dissolution behavior of the implants in simulated body fluid. This study opens up new possibilities for using S53P4 to manufacture various structures, while tailoring their bioactivity by controlling the proportions of the different phases. The results obtained in this thesis give valuable additional information and tools to the state of the art for designing glasses with respect to future clinical applications. With the knowledge gained we can identify different dissolution patters and use this information to improve the tuning of glass compositions. In addition, the novel online analysis approach provides an excellent opportunity to further enhance our knowledge of glass behavior in simulated body conditions.

Cost-effectiveness analysis in South Karelia Central Hospital

The target organization of this study, otherwise South-Karelia Social and Health Care District (Eksote) provides health, senior, family and social welfare services. South Karelia Central Hospital provides special health care and offers health services from all of the most important medical specialties. Eksote has in use 15D instrument to measure the health-related quality of life (HRQoL) of their patients before and after their interventions for observing the health effects of the medical care. Furthermore, 15D allows measuring the effectiveness and cost-effectiveness of health care when comparing these before and after results of the 15D measurements and adding the costs of the interventions into this research. The main purposes of this study were to analyze the effectiveness and cost-effectiveness of medical care in South Karelia Central Hospital by using the gathered 15D data to calculate effectiveness and cost-effectiveness ratios and to analyze the reliability and availability of the data. Study has been conducted using literature review and quantitative research methods. The results indicate that from the patients within the eight units selected to this study the 15D change information was available from the 52 %, the 15D change and the cost information from 38 % and the information of quality-adjusted life years (QALYs) produced and the cost information from 35 %. The effectiveness and cost-effectiveness of medical care were greatest at the units of Pain Outpatient Clinic and Rheumatic Diseases Outpatient Clinic. The most effective medical care is given in the unit where the average price of one produced QALY is the highest (Orthopedics). However, the calculated standard deviations pointed out that there are great variances in the effectiveness and cost-effectiveness within the units also.

Phenotyping and genotyping methods applied to investigate the relatedness of Brazilian isolates of Enterobacter cloacae

In order to evaluate the resolving power of several typing methods to identify relatedness among Brazilian strains of Enterobacter cloacae, we selected twenty isolates from different patients on three wards of a University Hospital (Orthopedics, Nephrology, and Hematology). Traditional phenotyping methods applied to isolates included biotyping, antibiotic sensitivity, phage-typing, and O-serotyping. Plasmid profile analysis, ribotyping, and macrorestriction analysis by pulsed-field gel electrophoresis (PFGE) were used as genotyping methods. Sero- and phage-typing were not useful since the majority of isolates could not be subtyped by these methods. Biotyping, antibiogram and plasmid profile permitted us to classify the samples into different groups depending on the method used, and consequently were not reliable. Ribotyping and PFGE were significantly correlated with the clinical epidemiological analysis. PFGE did not type strains containing nonspecific DNase. Ribotyping was the most discriminative method for typing Brazilian isolates of E. cloacae.

An animal experimental study of porous magnesium scaffold degradation and osteogenesis

Our objective was to observe the biodegradable and osteogenic properties of magnesium scaffolding under in vivo conditions. Twelve 6-month-old male New Zealand white rabbits were randomly divided into two groups. The chosen operation site was the femoral condyle on the right side. The experimental group was implanted with porous magnesium scaffolds, while the control group was implanted with hydroxyapatite scaffolds. X-ray and blood tests, which included serum magnesium, alanine aminotransferase (ALT), creatinine (CREA), and blood urea nitrogen (BUN) were performed serially at 1, 2, and 3 weeks, and 1, 2, and 3 months. All rabbits were killed 3 months postoperatively, and the heart, kidney, spleen, and liver were analyzed with hematoxylin and eosin (HE) staining. The bone samples were subjected to microcomputed tomography scanning (micro-CT) and hard tissue biopsy. SPSS 13.0 (USA) was used for data analysis, and values of P<0.05 were considered to be significant. Bubbles appeared in the X-ray of the experimental group after 2 weeks, whereas there was no gas in the control group. There were no statistical differences for the serum magnesium concentrations, ALT, BUN, and CREA between the two groups (P>0.05). All HE-stained slices were normal, which suggested good biocompatibility of the scaffold. Micro-CT showed that magnesium scaffolds degraded mainly from the outside to inside, and new bone was ingrown following the degradation of magnesium scaffolds. The hydroxyapatite scaffold was not degraded and had fewer osteoblasts scattered on its surface. There was a significant difference in the new bone formation and scaffold bioabsorption between the two groups (9.29±1.27 vs 1.40±0.49 and 7.80±0.50 vs 0.00±0.00 mm3, respectively; P<0.05). The magnesium scaffold performed well in degradation and osteogenesis, and is a promising material for orthopedics.

Apport d’une évaluation biomécanique 3D du genou dans la prise en charge orthopédique de patients ayant une rupture du ligament croisé antérieur

Parmi les blessures sportives reliées au genou, 20 % impliquent le ligament croisé antérieur (LCA). Le LCA étant le principal stabilisateur du genou, une lésion à cette structure engendre une importante instabilité articulaire influençant considérablement la fonction du genou. L’évaluation clinique actuelle des patients ayant une atteinte au LCA présente malheureusement des limitations importantes à la fois dans l’investigation de l’impact de la blessure et dans le processus diagnostic. Une évaluation biomécanique tridimensionnelle (3D) du genou pourrait s’avérer une avenue innovante afin de pallier à ces limitations. L’objectif général de la thèse est de démontrer la valeur ajoutée du domaine biomécanique dans (1) l’investigation de l’impact de la blessure sur la fonction articulaire du genou et dans (2) l’aide au diagnostic. Pour répondre aux objectifs de recherche un groupe de 29 patients ayant une rupture du LCA (ACLD) et un groupe contrôle de 15 participants sains ont pris part à une évaluation biomécanique 3D du genou lors de tâches de marche sur tapis roulant. L’évaluation des patrons biomécaniques 3D du genou a permis de démontrer que les patients ACLD adoptent un mécanisme compensatoire que nous avons intitulé pivot-shift avoidance gait. Cette adaptation biomécanique a pour objectif d’éviter de positionner le genou dans une condition susceptible de provoquer une instabilité antérolatérale du genou lors de la marche. Par la suite, une méthode de classification a été développée afin d’associer de manière automatique et objective des patrons biomécaniques 3D du genou soit au groupe ACLD ou au groupe contrôle. Pour cela, des paramètres ont été extraits des patrons biomécaniques en utilisant une décomposition en ondelettes et ont ensuite été classifiés par la méthode du plus proche voisin. Notre méthode de classification a obtenu un excellent niveau précision, de sensibilité et de spécificité atteignant respectivement 88%, 90% et 87%. Cette méthode a donc le potentiel de servir d’outil d’aide à la décision clinique. La présente thèse a démontré l’apport considérable d’une évaluation biomécanique 3D du genou dans la prise en charge orthopédique de patients présentant une rupture du LCA; plus spécifiquement dans l’investigation de l’impact de la blessure et dans l’aide au diagnostic.

Optimization and validation of a new 3D-US imaging robot to detect, localize and quantify lower limb arterial stenoses

L’athérosclérose est une maladie qui cause, par l’accumulation de plaques lipidiques, le durcissement de la paroi des artères et le rétrécissement de la lumière. Ces lésions sont généralement localisées sur les segments artériels coronariens, carotidiens, aortiques, rénaux, digestifs et périphériques. En ce qui concerne l’atteinte périphérique, celle des membres inférieurs est particulièrement fréquente. En effet, la sévérité de ces lésions artérielles est souvent évaluée par le degré d’une sténose (réduction >50 % du diamètre de la lumière) en angiographie, imagerie par résonnance magnétique (IRM), tomodensitométrie ou échographie. Cependant, pour planifier une intervention chirurgicale, une représentation géométrique artérielle 3D est notamment préférable. Les méthodes d’imagerie par coupe (IRM et tomodensitométrie) sont très performantes pour générer une imagerie tridimensionnelle de bonne qualité mais leurs utilisations sont dispendieuses et invasives pour les patients. L’échographie 3D peut constituer une avenue très prometteuse en imagerie pour la localisation et la quantification des sténoses. Cette modalité d’imagerie offre des avantages distincts tels la commodité, des coûts peu élevés pour un diagnostic non invasif (sans irradiation ni agent de contraste néphrotoxique) et aussi l’option d’analyse en Doppler pour quantifier le flux sanguin. Étant donné que les robots médicaux ont déjà été utilisés avec succès en chirurgie et en orthopédie, notre équipe a conçu un nouveau système robotique d’échographie 3D pour détecter et quantifier les sténoses des membres inférieurs. Avec cette nouvelle technologie, un radiologue fait l’apprentissage manuel au robot d’un balayage échographique du vaisseau concerné. Par la suite, le robot répète à très haute précision la trajectoire apprise, contrôle simultanément le processus d’acquisition d’images échographiques à un pas d’échantillonnage constant et conserve de façon sécuritaire la force appliquée par la sonde sur la peau du patient. Par conséquent, la reconstruction d’une géométrie artérielle 3D des membres inférieurs à partir de ce système pourrait permettre une localisation et une quantification des sténoses à très grande fiabilité. L’objectif de ce projet de recherche consistait donc à valider et optimiser ce système robotisé d’imagerie échographique 3D. La fiabilité d’une géométrie reconstruite en 3D à partir d’un système référentiel robotique dépend beaucoup de la précision du positionnement et de la procédure de calibration. De ce fait, la précision pour le positionnement du bras robotique fut évaluée à travers son espace de travail avec un fantôme spécialement conçu pour simuler la configuration des artères des membres inférieurs (article 1 - chapitre 3). De plus, un fantôme de fils croisés en forme de Z a été conçu pour assurer une calibration précise du système robotique (article 2 - chapitre 4). Ces méthodes optimales ont été utilisées pour valider le système pour l’application clinique et trouver la transformation qui convertit les coordonnées de l’image échographique 2D dans le référentiel cartésien du bras robotisé. À partir de ces résultats, tout objet balayé par le système robotique peut être caractérisé pour une reconstruction 3D adéquate. Des fantômes vasculaires compatibles avec plusieurs modalités d’imagerie ont été utilisés pour simuler différentes représentations artérielles des membres inférieurs (article 2 - chapitre 4, article 3 - chapitre 5). La validation des géométries reconstruites a été effectuée à l`aide d`analyses comparatives. La précision pour localiser et quantifier les sténoses avec ce système robotisé d’imagerie échographique 3D a aussi été déterminée. Ces évaluations ont été réalisées in vivo pour percevoir le potentiel de l’utilisation d’un tel système en clinique (article 3- chapitre 5).

Pertinence de la référence en orthopédie pédiatrique des cas suspectés de scoliose idiopathique : association avec la morbidité perçue et les itinéraires de soins des patients

La scoliose idiopathique de l’adolescent (SIA) est le type de déformation musculosquelettique le plus fréquent dans la population pédiatrique, pour une prévalence d’environ 2,0%. Depuis l’arrêt des programmes scolaires de dépistage de la SIA dans les années 1980 au Canada, nous ne disposions d’aucune donnée sur l’utilisation des services de santé par les patients présentant une SIA suspectée. En l’absence de tels programmes, des changements dans les patrons d’utilisation des services spécialisés d’orthopédie pédiatrique sont anticipés. La thèse a donc pour but d’étudier la pertinence de la référence dans ces services des jeunes avec SIA suspectée. Elle est structurée autour de trois principaux objectifs. 1) Valider un instrument de mesure de la morbidité perçue (perception des symptômes) dans la clientèle d’orthopédie pédiatrique; 2) Étudier la relation entre la morbidité perçue par les profanes (le jeune et le parent) et la morbidité objectivée par les experts; 3) Caractériser les itinéraires de soins des patients avec SIA suspectée, de façon à en élaborer une taxonomie et à analyser les relations entre ceux-ci et la pertinence de la référence. En 2006-2007, une vaste enquête a été réalisée dans les cinq cliniques d’orthopédie pédiatrique du Sud-Ouest du Québec : 831 patients référés ont été recrutés. Ils furent classés selon des critères de pertinence de la référence (inappropriée, appropriée ou tardive) définis en fonction de l’amplitude de la courbe rachidienne et de la maturité squelettique à cette première visite. La morbidité perçue par les profanes a été opérationnalisée par la gravité, l’urgence, les douleurs, l’impact sur l’image de soi et la santé générale. L’ensemble des consultations médicales et paramédicales effectuées en amont de la consultation en orthopédie pédiatrique a été documenté par questionnaire auprès des familles. En s’appuyant sur le Modèle comportemental de l’utilisation des services d’Andersen, les facteurs (dits de facilitation et de capacité) individuels, relatifs aux professionnels et au système ont été considérés comme variables d’ajustement dans l’étude des relations entre la morbidité perçue ou les itinéraires de soins et la pertinence de la référence. Les principales conclusions de cette étude sont : i) Nous disposons d’instruments fidèles (alpha de Cronbach entre 0,79 et 0,86) et valides (validité de construit, concomitante et capacité discriminante) pour mesurer la perception de la morbidité dans la population adolescente francophone qui consulte en orthopédie pédiatrique; ii) Les profanes jouent un rôle important dans la suspicion de la scoliose (53% des cas) et leur perception de la morbidité est directement associée à la morbidité objectivée par les professionnels; iii) Le case-mix actuel en orthopédie est jugé non optimal en regard de la pertinence de la référence, les mécanismes actuels entraînant un nombre considérable de références inappropriées (38%) et tardives (18%) en soins spécialisés d’orthopédie pédiatrique; iv) Il existe une grande diversité de professionnels par qui sont vus les jeunes avec SIA suspectée ainsi qu’une variabilité des parcours de soins en amont de la consultation en orthopédie, et v) La continuité des soins manifestée dans les itinéraires, notamment via la source régulière de soins de l’enfant, est favorable à la diminution des références tardives (OR=0,32 [0,17-0,59]). Les retombées de cette thèse se veulent des contributions à l’avancement des connaissances et ouvrent sur des propositions d’initiatives de transfert des connaissances auprès des professionnels de la première ligne. De telles initiatives visent la sensibilisation à cette condition de santé et le soutien à la prise de décision de même qu’une meilleure coordination des demandes de consultation pour une référence appropriée et en temps opportun.

2D-3D Rigid-Body Registration of X-Ray Fluoroscopy and CT Images

The registration of pre-operative volumetric datasets to intra- operative two-dimensional images provides an improved way of verifying patient position and medical instrument loca- tion. In applications from orthopedics to neurosurgery, it has a great value in maintaining up-to-date information about changes due to intervention. We propose a mutual information- based registration algorithm to establish the proper align- ment. For optimization purposes, we compare the perfor- mance of the non-gradient Powell method and two slightly di erent versions of a stochastic gradient ascent strategy: one using a sparsely sampled histogramming approach and the other Parzen windowing to carry out probability density approximation. Our main contribution lies in adopting the stochastic ap- proximation scheme successfully applied in 3D-3D registra- tion problems to the 2D-3D scenario, which obviates the need for the generation of full DRRs at each iteration of pose op- timization. This facilitates a considerable savings in compu- tation expense. We also introduce a new probability density estimator for image intensities via sparse histogramming, de- rive gradient estimates for the density measures required by the maximization procedure and introduce the framework for a multiresolution strategy to the problem. Registration results are presented on uoroscopy and CT datasets of a plastic pelvis and a real skull, and on a high-resolution CT- derived simulated dataset of a real skull, a plastic skull, a plastic pelvis and a plastic lumbar spine segment.

Fracturas de tercio medio clavícula tratamiento quirúrgico versus tratamiento ortopédico en pacientes jóvenes Hospital Kennedy 2006-2009

Introducción: el tratamiento usual para fracturas del tercio medio de la clavícula es el ortopédico, sin embargo recientemente se ha propuesto que el tratamiento quirúrgico podría ser una mejor opción para los pacientes jóvenes laboralmente activos afectados por este tipo de fractura. Métodos: este es un estudio retrospectivo analítico de corte transversal comprendido en un periodo de cuatro años (2006-2009) en el servicio de Ortopedia del Hospital Kennedy E.S.E. Los desenlaces que se evaluaron fueron la función del hombro, el reintegro laboral, lesión neurológica y alteración cosmética. Resultados: en total se evaluaron 204 pacientes, de los cuales solo 103 cumplieron con los criterios de inclusión (17 mujeres y 86 hombres), de los cuales 83 recibieron tratamiento ortopédico y 20 requirieron manejo quirúrgico con promedio de edades de 28.4 años manejados ortopédicamente y 30.4 años en tratamiento quirúrgico predominando el género masculino. Conclusión: para los pacientes con fractura de clavícula de tercio medio, sin importar el tipo de tratamiento al que fueron sometidos, el resultado desde el punto de vista funcional, lesión neurológica y reintegro laboral fueron similares con excepción de la alteración cosmética.