997 resultados para Non-ideal Duffing
Resumo:
Mower is a micro-architecture technique which targets branch misprediction penalties in superscalar processors. It speeds-up the misprediction recovery process by dynamically evicting stale instructions and fixing the RAT (Register Alias Table) using explicit branch dependency tracking. Tracking branch dependencies is accomplished by using simple bit matrices. This low-overhead technique allows overlapping of the recovery process with instruction fetching, renaming and scheduling from the correct path. Our evaluation of the mechanism indicates that it yields performance very close to ideal recovery and provides up to 5% speed-up and 2% reduction in power consumption compared to a traditional recovery mechanism using a reorder buffer and a walker. The simplicity of the mechanism should permit easy implementation of Mower in an actual processor.
Resumo:
Synthetic oligonucleotides and peptides have found wide applications in industry and academic research labs. There are ~60 peptide drugs on the market and over 500 under development. The global annual sale of peptide drugs in 2010 was estimated to be $13 billion. There are three oligonucleotide-based drugs on market; among them, the FDA newly approved Kynamro was predicted to have a $100 million annual sale. The annual sale of oligonucleotides to academic labs was estimated to be $700 million. Both bio-oligomers are mostly synthesized on automated synthesizers using solid phase synthesis technology, in which nucleoside or amino acid monomers are added sequentially until the desired full-length sequence is reached. The additions cannot be complete, which generates truncated undesired failure sequences. For almost all applications, these impurities must be removed. The most widely used method is HPLC. However, the method is slow, expensive, labor-intensive, not amendable for automation, difficult to scale up, and unsuitable for high throughput purification. It needs large capital investment, and consumes large volumes of harmful solvents. The purification costs are estimated to be more than 50% of total production costs. Other methods for bio-oligomer purification also have drawbacks, and are less favored than HPLC for most applications. To overcome the problems of known biopolymer purification technologies, we have developed two non-chromatographic purification methods. They are (1) catching failure sequences by polymerization, and (2) catching full-length sequences by polymerization. In the first method, a polymerizable group is attached to the failure sequences of the bio-oligomers during automated synthesis; purification is achieved by simply polymerizing the failure sequences into an insoluble gel and extracting full-length sequences. In the second method, a polymerizable group is attached to the full-length sequences, which are then incorporated into a polymer; impurities are removed by washing, and pure product is cleaved from polymer. These methods do not need chromatography, and all drawbacks of HPLC no longer exist. Using them, purification is achieved by simple manipulations such as shaking and extraction. Therefore, they are suitable for large scale purification of oligonucleotide and peptide drugs, and also ideal for high throughput purification, which currently has a high demand for research projects involving total gene synthesis. The dissertation will present the details about the development of the techniques. Chapter 1 will make an introduction to oligodeoxynucleotides (ODNs), their synthesis and purification. Chapter 2 will describe the detailed studies of using the catching failure sequences by polymerization method to purify ODNs. Chapter 3 will describe the further optimization of the catching failure sequences by polymerization ODN purification technology to the level of practical use. Chapter 4 will present using the catching full-length sequence by polymerization method for ODN purification using acid-cleavable linker. Chapter 5 will make an introduction to peptides, their synthesis and purification. Chapter 6 will describe the studies using the catching full-length sequence by polymerization method for peptide purification.
Resumo:
AIM To identify the ideal timing of first permanent molar extraction to reduce the future need for orthodontic treatment. MATERIALS AND METHODS A computerised database and subsequent manual search was performed using Medline database, Embase and Ovid, covering the period from January 1946 to February 2013. Two reviewers (JE and ME) extracted the data independently and evaluated if the studies matched the inclusion criteria. Inclusion criteria were specification of the follow-up with clinical examination or analysis of models, specification of the chronological age or dental developmental stage at the time of extraction, no treatment in between, classification of the treatment result into perfect, good, average and poor. The search was limited to human studies and no language limitations were set. RESULTS The search strategy resulted in 18 full-text articles, of which 6 met the inclusion criteria. By pooling the data from maxillary sites, good to perfect clinical outcome was estimated in 72% (95% confidence interval 63%-82%). Extractions at the age of 8-10.5 years tended to show better spontaneous clinical outcomes compared to the other age groups. By pooling the data from mandibular sites, extractions performed at the age of 8-10.5 and 10.5-11.5 years showed significantly superior spontaneous clinical outcome with a probability of 50% and 59% likelihood, respectively, to achieve good to perfect clinical result (p<0.05) compared to the other age groups (<8 years of age: 34%, >11.5 years of age: 44%). CONCLUSION Prevention of complications after first permanent molars extractions is an important issue. The overall success rate of spontaneous clinical outcome for maxillary extraction of first permanent molars was superior to mandibular extraction. Extractions of mandibular first permanent molars should be performed between 8 and 11.5 years of age in order to achieve a good spontaneous clinical outcome. For the extraction in the maxilla, no firm conclusions concerning the ideal extraction timing could be drawn.
Resumo:
Este trabajo analizará el ideal caballeresco que se desprende de las cantigas d'escarnho del rey Alfonso X, en particular de una lectura de la cantiga "Non me posso pagar tanto" (LPGP 18026). En ella, el rechazo ficticio a las costumbres, ideales y obligaciones nobiliarios llegan a formar una imagen de aquello que se entiende como lo esencial y necesario en un caballero. Esto se podrá complementar con los reclamos en verso que este rey prodigó a sus súbditos por fallar a sus compromisos guerreros, y con los escarnios a costumbres censuradas por la corte, que llegan a conformar un pequeño código de comportamiento. A partir de esto, se establecerá un contraste con la imagen del caballero cortesano tal como se desprende, más tarde, del prólogo al Cancionero de Baena, con la cual presenta semejanzas importantes pero también diferencias dignas de mención.
Resumo:
Este trabajo analizará el ideal caballeresco que se desprende de las cantigas d'escarnho del rey Alfonso X, en particular de una lectura de la cantiga "Non me posso pagar tanto" (LPGP 18026). En ella, el rechazo ficticio a las costumbres, ideales y obligaciones nobiliarios llegan a formar una imagen de aquello que se entiende como lo esencial y necesario en un caballero. Esto se podrá complementar con los reclamos en verso que este rey prodigó a sus súbditos por fallar a sus compromisos guerreros, y con los escarnios a costumbres censuradas por la corte, que llegan a conformar un pequeño código de comportamiento. A partir de esto, se establecerá un contraste con la imagen del caballero cortesano tal como se desprende, más tarde, del prólogo al Cancionero de Baena, con la cual presenta semejanzas importantes pero también diferencias dignas de mención.
Resumo:
Este trabajo analizará el ideal caballeresco que se desprende de las cantigas d'escarnho del rey Alfonso X, en particular de una lectura de la cantiga "Non me posso pagar tanto" (LPGP 18026). En ella, el rechazo ficticio a las costumbres, ideales y obligaciones nobiliarios llegan a formar una imagen de aquello que se entiende como lo esencial y necesario en un caballero. Esto se podrá complementar con los reclamos en verso que este rey prodigó a sus súbditos por fallar a sus compromisos guerreros, y con los escarnios a costumbres censuradas por la corte, que llegan a conformar un pequeño código de comportamiento. A partir de esto, se establecerá un contraste con la imagen del caballero cortesano tal como se desprende, más tarde, del prólogo al Cancionero de Baena, con la cual presenta semejanzas importantes pero también diferencias dignas de mención.
Resumo:
Número dedicado ao Novo Código de Processo Civil.
Resumo:
Multinational companies' (MNCs) corporate social responsibility (CSR) programs frequently comprise a portfolio of disconnected country-level programs or, alternatively, consist of blanket corporate policies that apply in the same way across the geographies where the company operates. Yet, the international nonmarket environment in which CSR programs operate is neither a completely fragmented nor a perfectly homogeneous one. Building on the concept of stakeholder-issue-networks, we develop a model that explicitly takes into consideration the role of geography in the characterization of a firm's nonmarket environment. This allows us to develop a taxonomy of nonmarket environments on the basis of their geographic spread and their degree of cross-border connectedness. We then explore the strategic and organizational implications that different ideal types of (cross-border) nonmarket environments have for the development of international CSR policies.
Resumo:
beta-turns are important topological motifs for biological recognition of proteins and peptides. Organic molecules that sample the side chain positions of beta-turns have shown broad binding capacity to multiple different receptors, for example benzodiazepines. beta-turns have traditionally been classified into various types based on the backbone dihedral angles (phi 2, psi 2, phi 3 and psi 3). Indeed, 57-68% of beta-turns are currently classified into 8 different backbone families (Type I, Type II, Type I', Type II', Type VIII, Type VIa1, Type VIa2 and Type VIb and Type IV which represents unclassified beta-turns). Although this classification of beta-turns has been useful, the resulting beta-turn types are not ideal for the design of beta-turn mimetics as they do not reflect topological features of the recognition elements, the side chains. To overcome this, we have extracted beta-turns from a data set of non-homologous and high-resolution protein crystal structures. The side chain positions, as defined by C-alpha-C-beta vectors, of these turns have been clustered using the kth nearest neighbor clustering and filtered nearest centroid sorting algorithms. Nine clusters were obtained that cluster 90% of the data, and the average intra-cluster RMSD of the four C-alpha-C-beta vectors is 0.36. The nine clusters therefore represent the topology of the side chain scaffold architecture of the vast majority of beta-turns. The mean structures of the nine clusters are useful for the development of beta-turn mimetics and as biological descriptors for focusing combinatorial chemistry towards biologically relevant topological space.
Resumo:
We report the successful RAFT-mediated emulsion polymerization of styrene using a non-ionic surfactant (Brij98), the highly reactive 1-phenylethyl phenyldithioacetate (PEPDTA) RAFT agent, and water-soluble initiator ammonium persulfate (APS). The molar ratio of RAFT agent to APS was identical in all experiments. Most of the monomer was contained within the micelles, analogous to microemulsion or miniemulsion systems but without the need of shear, sonication, cosurfactant, or a hydrophobe. The number-average molecular weight increased with conversion and the polydispersity index was below 1.2. This ideal 'living' behavior was only found when molecular weights of 9000 and below were targeted. It was postulated that the rapid transportation of RAFT agent from the monomer swollen micelles to the growing particles was fast on the polymerization timescale, and most if not all the RAFT agent is consumed within the first 10% conversion. In addition, it was postulated that the high nucleation rate from the high rate of exit ( of the R radical from the RAFT agent) and high entry rate from water-phase radicals ( high APS concentration) reduced the effects of 'superswelling' and therefore a similar molar ratio of RAFT agent to monomer was maintained in all growing particles. The high polydispersity indexes found when targeting molecular weights greater than 9000 were postulated to be due to the lower nucleation rate from the lower weight fractions of both APS and RAFT agent. In these cases, 'superswelling' played a dominant role leading to a heterogeneous distribution of RAFT to monomer ratios among the particles nucleated at different times.
Resumo:
This study examined the extent to which students could fake responses on personality and approaches to studying questionnaires, and the effects of such responding on the validity of non-cognitive measures for predicting academic performance (AP). University students produced a profile of an ‘ideal’ student using the Big-Five personality taxonomy, which yielded a stereotype with low scores for Neuroticism, and high scores for the other four traits. A sub-set of participants were allocated to a condition in which they were instructed to fake their responses as University applicants, portraying themselves as positively as possible. Scores for these participants revealed higher scores than those in a control condition on measures of deep and strategic approaches to studying, but lower scores on the surface approach variable. Conscientiousness was a significant predictor of AP in both groups, but the predictive effect of approaches to studying variables and Openness to Experience identified in the control group was lower in the group who faked their responses. Non-cognitive psychometric measures can be valid predictors of AP, but scores on these measures can be affected by instructional set. Further implications for psychometric measurement in educational settings are discussed.
Resumo:
Detection canines represent the fastest and most versatile means of illicit material detection. This research endeavor in its most simplistic form is the improvement of detection canines through training, training aids, and calibration. This study focuses on developing a universal calibration compound for which all detection canines, regardless of detection substance, can be tested daily to ensure that they are working with acceptable parameters. Surrogate continuation aids (SCAs) were developed for peroxide based explosives along with the validation of the SCAs already developed within the International Forensic Research Institute (IFRI) prototype surrogate explosives kit. Storage parameters of the SCAs were evaluated to give recommendations to the detection canine community on the best possible training aid storage solution that minimizes the likelihood of contamination. Two commonly used and accepted detection canine imprinting methods were also evaluated for the speed in which the canine is trained and their reliability. As a result of the completion of this study, SCAs have been developed for explosive detection canine use covering: peroxide based explosives, TNT based explosives, nitroglycerin based explosives, tagged explosives, plasticized explosives, and smokeless powders. Through the use of these surrogate continuation aids a more uniform and reliable system of training can be implemented in the field than is currently used today. By examining the storage parameters of the SCAs, an ideal storage system has been developed using three levels of containment for the reduction of possible contamination. The developed calibration compound will ease the growing concerns over the legality and reliability of detection canine use by detailing the daily working parameters of the canine, allowing for Daubert rules of evidence admissibility to be applied. Through canine field testing, it has been shown that the IFRI SCAs outperform other commercially available training aids on the market. Additionally, of the imprinting methods tested, no difference was found in the speed in which the canines are trained or their reliability to detect illicit materials. Therefore, if the recommendations discovered in this study are followed, the detection canine community will greatly benefit through the use of scientifically validated training techniques and training aids.
Resumo:
This paper continues the study of spectral synthesis and the topologies τ∞ and τr on the ideal space of a Banach algebra, concentrating on the class of Banach *-algebras, and in particular on L1-group algebras. It is shown that if a group G is a finite extension of an abelian group then τr is Hausdorff on the ideal space of L1(G) if and only if L1(G) has spectral synthesis, which in turn is equivalent to G being compact. The result is applied to nilpotent groups, [FD]−-groups, and Moore groups. An example is given of a non-compact, non-abelian group G for which L1(G) has spectral synthesis. It is also shown that if G is a non-discrete group then τr is not Hausdorff on the ideal lattice of the Fourier algebra A(G).
Multifactorial approach to non-viral gene therapy: development of an efficient system for the retina
Resumo:
Tese de Doutoramento, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016