Marginality and social integration in Uruguay

Includes bibliography

Equivalent representation of mutual coupling in transmission lines by discrete element

This paper describes a computational model based on lumped elements for the mutual coupling between phases in transmission lines without the explicit use of modal transformation matrices. The self and mutual parameters and the coupling between phases are modeled using modal transformation techniques. The modal representation is developed from the intrinsic consideration of the modal transformation matrix and the resulting system of time-domain differential equations is described as state equations. Thus, a detailed profile ofthe currents and the voltages through the line can be easily calculated using numerical or analytical integration methods. However, the original contribution of the article is the proposal of a time-domain model without the successive phase/mode transformations and a practical implementation based on conventional electrical circuits, without the use of electromagnetic theory to model the coupling between phases. © 2003-2012 IEEE.

Strain rate of the South American lithospheric plate by SIRGAS-CON geodetic observations

A multiyear solution of the SIRGAS-CON network was used to estimate the strain rates of the earth surface from the changing directions of the velocity vectors of 140 geodetic points located in the South American plate. The strain rate was determined by the finite element method using Delaunay triangulation points that formed sub-networks; each sub-network was considered a solid and homogeneous body. The results showed that strain rates vary along the South American plate and are more significant on the western portion of the plate, as expected, since this region is close to the subduction zone of the Nazca plate beneath the South American plate. After using Euler vectors to infer Nazca plate movement and to orient the velocity vectors of the South American plate, it was possible to estimate the convergence and accommodation rates of the Nazca and South American plates, respectively. Strain rate estimates permitted determination of predominant contraction and/or extension regions and to establish that contraction regions coincide with locations with most of the high magnitude seismic events. Some areas with extension and contraction strains were found to the east within the stable South American plate, which may result from different stresses associated with different geological characteristics. These results suggest that major movements detected on the surface near the Nazca plate occur in regions with more heterogeneous geological structures and multiple rupture events. Most seismic events in the South American plate are concentrated in areas with predominant contraction strain rates oriented northeast-southwest; significant amounts of elastic strain can be accumulated on geological structures away from the plate boundary faults; and, behavior of contractions and extensions is similar to what has been found in seismological studies. © 2013 Elsevier Ltd.

Técnica de identificação de parâmetros no domínio do tempo utilizando funções ortogonais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Método numérico-analítico generalizado para estimação do campo eletromagnético de linhas de transmissão de energia elétrica utilizando a teoria dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Delaunay Tetrahedralization of the Heart Based on Integration of Open Source Codes

The Finite Element Method (FEM) is a way of numerical solution applied in different areas, as simulations used in studies to improve cardiac ablation procedures. For this purpose, the meshes should have the same size and histological features of the focused structures. Some methods and tools used to generate tetrahedral meshes are limited mainly by the use conditions. In this paper, the integration of Open Source Softwares is presented as an alternative to solid modeling and automatic mesh generation. To demonstrate its efficiency, the cardiac structures were considered as a first application context: atriums, ventricles, valves, arteries and pericardium. The proposed method is feasible to obtain refined meshes in an acceptable time and with the required quality for simulations using FEM.

Limit Cycles for a Class of Continuous and Discontinuous Cubic Polynomial Differential Systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A local-global scheme for tracking crack path in three-dimensional solids

This paper aims to contribute to the three-dimensional generalization of numerical prediction of crack propagation through the formulation of finite elements with embedded discontinuities. The analysis of crack propagation in two-dimensional problems yields lines of discontinuity that can be tracked in a relatively simple way through the sequential construction of straight line segments oriented according to the direction of failure within each finite element in the solid. In three-dimensional analysis, the construction of the discontinuity path is more complex because it requires the creation of plane surfaces within each element, which must be continuous between the elements. In the method proposed by Chaves (2003) the crack is determined by solving a problem analogous to the heat conduction problem, established from local failure orientations, based on the stress state of the mechanical problem. To minimize the computational effort, in this paper a new strategy is proposed whereby the analysis for tracking the discontinuity path is restricted to the domain formed by some elements near the crack surface that develops along the loading process. The proposed methodology is validated by performing three-dimensional analyses of basic problems of experimental fractures and comparing their results with those reported in the literature.

Finite element evaluation of three methods of stable fixation of condyle base fractures

The surgical treatment of mandibular condyle fractures currently offers several possibilities for stable internal fixation. In this study, a finite element model evaluation was performed of three different methods for osteosynthesis of low subcondylar fractures: (1) two four-hole straight plates, (2) one seven-hole lambda plate, and (3) one four-hole trapezoidal plate. The finite element model evaluation considered a load applied to the first molar on the contralateral side to the fracture. Results showed that, although the three methods are capable of withstanding functional loading, the lambda plate displayed a more homogeneous stress distribution for both osteosynthesis material and bone and may be a better method when single-plate fixation is the option.

A coupling technique for non-matching finite element meshes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A New Cryptographic Scheme for Securing Dynamic Conferences in Data Networks

Dynamic conferencing refers to a scenario wherein any subset of users in a universe of users form a conference for sharing confidential information among themselves. The key distribution (KD) problem in dynamic conferencing is to compute a shared secret key for such a dynamically formed conference. In literature, the KD schemes for dynamic conferencing either are computationally unscalable or require communication among users, which is undesirable. The extended symmetric polynomial based dynamic conferencing scheme (ESPDCS) is one such KD scheme which has a high computational complexity that is universe size dependent. In this paper we present an enhancement to the ESPDCS scheme to develop a KD scheme called universe-independent SPDCS (UI-SPDCS) such that its complexity is independent of the universe size. However, the UI-SPDCS scheme does not scale with the conference size. We propose a relatively scalable KD scheme termed as DH-SPDCS that uses the UI-SPDCS scheme and the tree-based group Diffie- Hellman (TGDH) key exchange protocol. The proposed DH-SPDCS scheme provides a configurable trade-off between computation and communication complexity of the scheme.

Constructability Testing of Folded Plate Girders

A new steel girder bridge system was developed at the University of Nebraska. The innovative girder design is a box girder folded from a single steel plate that has a trapezoid shape with an opening on the bottom. The girder has application in short span bridges and accelerated construction situations. The structural performance of the girder requires investigation in all stages of a bridge’s lifecycle. This thesis contains descriptions and results from the first two tests from a series of tests developed to evaluate this new girder shape. The objective of these two tests was to investigate the constructability of the girders. During construction a bridge is in its least stable condition and it is important that the bridge components exhibit both adequate strength and stability during this critical stage. To this end, two girders were tested in flexure over a simple span as a non-composite beam simulating the loading the girders would be subjected to during construction. The results of the two tests indicate that the folded girder as a whole, and its components, provide adequate strength and stability at construction load levels. Failure occurred at loads that were above normal construction load levels and resulted in a ductile failure mode, which is a well documented benefit of steel components. The girders remained stable through all phases of loading including failure. The top flange was the weakest component of the beam during construction due to its role as a compression element that has a slender and un-braced form. The compression in the top flange caused local buckling in the top flange even at elastic load levels. This was the cause for loss of stiffness and failure in both specimens. Incorporation of a ridge at the center of the top flange of specimens, results of which are not reported in this thesis, proved to resolve this very early buckling issue.

BEM modeling of saturated porous media susceptible to damage

This paper deals with the numerical analysis of saturated porous media, taking into account the damage phenomena on the solid skeleton. The porous media is taken into poro-elastic framework, in full-saturated condition, based on Biot's Theory. A scalar damage model is assumed for this analysis. An implicit boundary element method (BEM) formulation, based on time-independent fundamental solutions, is developed and implemented to couple the fluid flow and two-dimensional elastostatic problems. The integration over boundary elements is evaluated using a numerical Gauss procedure. A semi-analytical scheme for the case of triangular domain cells is followed to carry out the relevant domain integrals. The non-linear problem is solved by a Newton-Raphson procedure. Numerical examples are presented, in order to validate the implemented formulation and to illustrate its efficacy. (C) 2011 Elsevier Ltd. All rights reserved.

Essays on the political economy of European integration

Recently, a rising interest in political and economic integration/disintegration issues has been developed in the political economy field. This growing strand of literature partly draws on traditional issues of fiscal federalism and optimum public good provision and focuses on a trade-off between the benefits of centralization, arising from economies of scale or externalities, and the costs of harmonizing policies as a consequence of the increased heterogeneity of individual preferences in an international union or in a country composed of at least two regions. This thesis stems from this strand of literature and aims to shed some light on two highly relevant aspects of the political economy of European integration. The first concerns the role of public opinion in the integration process; more precisely, how economic benefits and costs of integration shape citizens' support for European Union (EU) membership. The second is the allocation of policy competences among different levels of government: European, national and regional. Chapter 1 introduces the topics developed in this thesis by reviewing the main recent theoretical developments in the political economy analysis of integration processes. It is structured as follows. First, it briefly surveys a few relevant articles on economic theories of integration and disintegration processes (Alesina and Spolaore 1997, Bolton and Roland 1997, Alesina et al. 2000, Casella and Feinstein 2002) and discusses their relevance for the study of the impact of economic benefits and costs on public opinion attitude towards the EU. Subsequently, it explores the links existing between such political economy literature and theories of fiscal federalism, especially with regard to normative considerations concerning the optimal allocation of competences in a union. Chapter 2 firstly proposes a model of citizens’ support for membership of international unions, with explicit reference to the EU; subsequently it tests the model on a panel of EU countries. What are the factors that influence public opinion support for the European Union (EU)? In international relations theory, the idea that citizens' support for the EU depends on material benefits deriving from integration, i.e. whether European integration makes individuals economically better off (utilitarian support), has been common since the 1970s, but has never been the subject of a formal treatment (Hix 2005). A small number of studies in the 1990s have investigated econometrically the link between national economic performance and mass support for European integration (Eichenberg and Dalton 1993; Anderson and Kalthenthaler 1996), but only making informal assumptions. The main aim of Chapter 2 is thus to propose and test our model with a view to providing a more complete and theoretically grounded picture of public support for the EU. Following theories of utilitarian support, we assume that citizens are in favour of membership if they receive economic benefits from it. To develop this idea, we propose a simple political economic model drawing on the recent economic literature on integration and disintegration processes. The basic element is the existence of a trade-off between the benefits of centralisation and the costs of harmonising policies in presence of heterogeneous preferences among countries. The approach we follow is that of the recent literature on the political economy of international unions and the unification or break-up of nations (Bolton and Roland 1997, Alesina and Wacziarg 1999, Alesina et al. 2001, 2005a, to mention only the relevant). The general perspective is that unification provides returns to scale in the provision of public goods, but reduces each member state’s ability to determine its most favoured bundle of public goods. In the simple model presented in Chapter 2, support for membership of the union is increasing in the union’s average income and in the loss of efficiency stemming from being outside the union, and decreasing in a country’s average income, while increasing heterogeneity of preferences among countries points to a reduced scope of the union. Afterwards we empirically test the model with data on the EU; more precisely, we perform an econometric analysis employing a panel of member countries over time. The second part of Chapter 2 thus tries to answer the following question: does public opinion support for the EU really depend on economic factors? The findings are broadly consistent with our theoretical expectations: the conditions of the national economy, differences in income among member states and heterogeneity of preferences shape citizens’ attitude towards their country’s membership of the EU. Consequently, this analysis offers some interesting policy implications for the present debate about ratification of the European Constitution and, more generally, about how the EU could act in order to gain more support from the European public. Citizens in many member states are called to express their opinion in national referenda, which may well end up in rejection of the Constitution, as recently happened in France and the Netherlands, triggering a European-wide political crisis. These events show that nowadays understanding public attitude towards the EU is not only of academic interest, but has a strong relevance for policy-making too. Chapter 3 empirically investigates the link between European integration and regional autonomy in Italy. Over the last few decades, the double tendency towards supranationalism and regional autonomy, which has characterised some European States, has taken a very interesting form in this country, because Italy, besides being one of the founding members of the EU, also implemented a process of decentralisation during the 1970s, further strengthened by a constitutional reform in 2001. Moreover, the issue of the allocation of competences among the EU, the Member States and the regions is now especially topical. The process leading to the drafting of European Constitution (even if then it has not come into force) has attracted much attention from a constitutional political economy perspective both on a normative and positive point of view (Breuss and Eller 2004, Mueller 2005). The Italian parliament has recently passed a new thorough constitutional reform, still to be approved by citizens in a referendum, which includes, among other things, the so called “devolution”, i.e. granting the regions exclusive competence in public health care, education and local police. Following and extending the methodology proposed in a recent influential article by Alesina et al. (2005b), which only concentrated on the EU activity (treaties, legislation, and European Court of Justice’s rulings), we develop a set of quantitative indicators measuring the intensity of the legislative activity of the Italian State, the EU and the Italian regions from 1973 to 2005 in a large number of policy categories. By doing so, we seek to answer the following broad questions. Are European and regional legislations substitutes for state laws? To what extent are the competences attributed by the European treaties or the Italian Constitution actually exerted in the various policy areas? Is their exertion consistent with the normative recommendations from the economic literature about their optimum allocation among different levels of government? The main results show that, first, there seems to be a certain substitutability between EU and national legislations (even if not a very strong one), but not between regional and national ones. Second, the EU concentrates its legislative activity mainly in international trade and agriculture, whilst social policy is where the regions and the State (which is also the main actor in foreign policy) are more active. Third, at least two levels of government (in some cases all of them) are significantly involved in the legislative activity in many sectors, even where the rationale for that is, at best, very questionable, indicating that they actually share a larger number of policy tasks than that suggested by the economic theory. It appears therefore that an excessive number of competences are actually shared among different levels of government. From an economic perspective, it may well be recommended that some competences be shared, but only when the balance between scale or spillover effects and heterogeneity of preferences suggests so. When, on the contrary, too many levels of government are involved in a certain policy area, the distinction between their different responsibilities easily becomes unnecessarily blurred. This may not only leads to a slower and inefficient policy-making process, but also risks to make it too complicate to understand for citizens, who, on the contrary, should be able to know who is really responsible for a certain policy when they vote in national,local or European elections or in referenda on national or European constitutional issues.

L'a(rche)tipico Brian O'Nolan. Comico e riso dalla tradizione al post-

This study aims at analysing Brian O'Nolans literary production in the light of a reconsideration of the role played by his two most famous pseudonyms ,Flann Brien and Myles na Gopaleen, behind which he was active both as a novelist and as a journalist. We tried to establish a new kind of relationship between them and their empirical author following recent cultural and scientific surveys in the field of Humour Studies, Psychology, and Sociology: taking as a starting point the appreciation of the comic attitude in nature and in cultural history, we progressed through a short history of laughter and derision, followed by an overview on humour theories. After having established such a frame, we considered an integration of scientific studies in the field of laughter and humour as a base for our study scheme, in order to come to a definition of the comic author as a recognised, powerful and authoritative social figure who acts as a critic of conventions. The history of laughter and comic we briefly summarized, based on the one related by the French scholar Georges Minois in his work (Minois 2004), has been taken into account in the view that humorous attitude is one of man’s characteristic traits always present and witnessed throughout the ages, though subject in most cases to repression by cultural and political conservative power. This sort of Super-Ego notwithstanding, or perhaps because of that, comic impulse proved irreducible exactly in its influence on the current cultural debates. Basing mainly on Robert R. Provine’s (Provine 2001), Fabio Ceccarelli’s (Ceccarelli 1988), Arthur Koestler’s (Koestler 1975) and Peter L. Berger’s (Berger 1995) scientific essays on the actual occurrence of laughter and smile in complex social situations, we underlined the many evidences for how the use of comic, humour and wit (in a Freudian sense) could be best comprehended if seen as a common mind process designed for the improvement of knowledge, in which we traced a strict relation with the play-element the Dutch historian Huizinga highlighted in his famous essay, Homo Ludens (Huizinga 1955). We considered comic and humour/wit as different sides of the same coin, and showed how the demonstrations scientists provided on this particular subject are not conclusive, given that the mental processes could not still be irrefutably shown to be separated as regards graduations in comic expression and reception: in fact, different outputs in expressions might lead back to one and the same production process, following the general ‘Economy Rule’ of evolution; man is the only animal who lies, meaning with this that one feeling is not necessarily biuniquely associated with one and the same outward display, so human expressions are not validation proofs for feelings. Considering societies, we found that in nature they are all organized in more or less the same way, that is, in élites who govern over a community who, in turn, recognizes them as legitimate delegates for that task; we inferred from this the epistemological possibility for the existence of an added ruling figure alongside those political and religious: this figure being the comic, who is the person in charge of expressing true feelings towards given subjects of contention. Any community owns one, and his very peculiar status is validated by the fact that his place is within the community, living in it and speaking to it, but at the same time is outside it in the sense that his action focuses mainly on shedding light on ideas and objects placed out-side the boundaries of social convention: taboos, fears, sacred objects and finally culture are the favourite targets of the comic person’s arrow. This is the reason for the word a(rche)typical as applied to the comic figure in society: atypical in a sense, because unconventional and disrespectful of traditions, critical and never at ease with unblinkered respect of canons; archetypical, because the “village fool”, buffoon, jester or anyone in any kind of society who plays such roles, is an archetype in the Jungian sense, i.e. a personification of an irreducible side of human nature that everybody instinctively knows: a beginner of a tradition, the perfect type, what is most conventional of all and therefore the exact opposite of an atypical. There is an intrinsic necessity, we think, of such figures in societies, just like politicians and priests, who should play an elitist role in order to guide and rule not for their own benefit but for the good of the community. We are not naïve and do know that actual owners of power always tend to keep it indefinitely: the ‘social comic’ as a role of power has nonetheless the distinctive feature of being the only job whose tension is not towards stability. It has got in itself the rewarding permission of contradiction, for the very reason we exposed before that the comic must cast an eye both inside and outside society and his vision may be perforce not consistent, then it is satisfactory for the popularity that gives amongst readers and audience. Finally, the difference between governors, priests and comic figures is the seriousness of the first two (fundamentally monologic) and the merry contradiction of the third (essentially dialogic). MPs, mayors, bishops and pastors should always console, comfort and soothe popular mood in respect of the public convention; the comic has the opposite task of provoking, urging and irritating, accomplishing at the same time a sort of control of the soothing powers of society, keepers of the righteousness. In this view, the comic person assumes a paramount importance in the counterbalancing of power administration, whether in form of acting in public places or in written pieces which could circulate for private reading. At this point comes into question our Irish writer Brian O'Nolan(1911-1966), real name that stood behind the more famous masks of Flann O'Brien, novelist, author of At Swim-Two-Birds (1939), The Hard Life (1961), The Dalkey Archive (1964) and, posthumously, The Third Policeman (1967); and of Myles na Gopaleen, journalist, keeper for more than 25 years of the Cruiskeen Lawn column on The Irish Times (1940-1966), and author of the famous book-parody in Irish An Béal Bocht (1941), later translated in English as The Poor Mouth (1973). Brian O'Nolan, professional senior civil servant of the Republic, has never seen recognized his authorship in literary studies, since all of them concentrated on his alter egos Flann, Myles and some others he used for minor contributions. So far as we are concerned, we think this is the first study which places the real name in the title, this way acknowledging him an unity of intents that no-one before did. And this choice in titling is not a mere mark of distinction for the sake of it, but also a wilful sign of how his opus should now be reconsidered. In effect, the aim of this study is exactly that of demonstrating how the empirical author Brian O'Nolan was the real Deus in machina, the master of puppets who skilfully directed all of his identities in planned directions, so as to completely fulfil the role of the comic figure we explained before. Flann O'Brien and Myles na Gopaleen were personae and not persons, but the impression one gets from the critical studies on them is the exact opposite. Literary consideration, that came only after O'Nolans death, began with Anne Clissmann’s work, Flann O'Brien: A Critical Introduction to His Writings (Clissmann 1975), while the most recent book is Keith Donohue’s The Irish Anatomist: A Study of Flann O'Brien (Donohue 2002); passing through M.Keith Booker’s Flann O'Brien, Bakhtin and Menippean Satire (Booker 1995), Keith Hopper’s Flann O'Brien: A Portrait of the Artist as a Young Post-Modernist (Hopper 1995) and Monique Gallagher’s Flann O'Brien, Myles et les autres (Gallagher 1998). There have also been a couple of biographies, which incidentally somehow try to explain critical points his literary production, while many critical studies do the same on the opposite side, trying to found critical points of view on the author’s restless life and habits. At this stage, we attempted to merge into O'Nolan's corpus the journalistic articles he wrote, more than 4,200, for roughly two million words in the 26-year-old running of the column. To justify this, we appealed to several considerations about the figure O'Nolan used as writer: Myles na Gopaleen (later simplified in na Gopaleen), who was the equivalent of the street artist or storyteller, speaking to his imaginary public and trying to involve it in his stories, quarrels and debates of all kinds. First of all, he relied much on language for the reactions he would obtain, playing on, and with, words so as to ironically unmask untrue relationships between words and things. Secondly, he pushed to the limit the convention of addressing to spectators and listeners usually employed in live performing, stretching its role in the written discourse to come to a greater effect of involvement of readers. Lastly, he profited much from what we labelled his “specific weight”, i.e. the potential influence in society given by his recognised authority in determined matters, a position from which he could launch deeper attacks on conventional beliefs, so complying with the duty of a comic we hypothesised before: that of criticising society even in threat of losing the benefits the post guarantees. That seemingly masochistic tendency has its rationale. Every representative has many privileges on the assumption that he, or she, has great responsibilities in administrating. The higher those responsibilities are, the higher is the reward but also the severer is the punishment for the misfits done while in charge. But we all know that not everybody accepts the rules and many try to use their power for their personal benefit and do not want to undergo law’s penalties. The comic, showing in this case more civic sense than others, helped very much in this by the non-accessibility to the use of public force, finds in the role of the scapegoat the right accomplishment of his task, accepting the punishment when his breaking of the conventions is too stark to be forgiven. As Ceccarelli demonstrated, the role of the object of laughter (comic, ridicule) has its very own positive side: there is freedom of expression for the person, and at the same time integration in the society, even though at low levels. Then the banishment of a ‘social’ comic can never get to total extirpation from society, revealing how the scope of the comic lies on an entirely fictional layer, bearing no relation with facts, nor real consequences in terms of physical health. Myles na Gopaleen, mastering these three characteristics we postulated in the highest way, can be considered an author worth noting; and the oeuvre he wrote, the whole collection of Cruiskeen Lawn articles, is rightfully a novel because respects the canons of it especially regarding the authorial figure and his relationship with the readers. In addition, his work can be studied even if we cannot conduct our research on the whole of it, this proceeding being justified exactly because of the resemblances to the real figure of the storyteller: its ‘chapters’ —the daily articles— had a format that even the distracted reader could follow, even one who did not read each and every article before. So we can critically consider also a good part of them, as collected in the seven volumes published so far, with the addition of some others outside the collections, because completeness in this case is not at all a guarantee of a better precision in the assessment; on the contrary: examination of the totality of articles might let us consider him as a person and not a persona. Once cleared these points, we proceeded further in considering tout court the works of Brian O'Nolan as the works of a unique author, rather than complicating the references with many names which are none other than well-wrought sides of the same personality. By putting O'Nolan as the correct object of our research, empirical author of the works of the personae Flann O'Brien and Myles na Gopaleen, there comes out a clearer literary landscape: the comic author Brian O'Nolan, self-conscious of his paramount role in society as both a guide and a scourge, in a word as an a(rche)typical, intentionally chose to differentiate his personalities so as to create different perspectives in different fields of knowledge by using, in addition, different means of communication: novels and journalism. We finally compared the newly assessed author Brian O'Nolan with other great Irish comic writers in English, such as James Joyce (the one everybody named as the master in the field), Samuel Beckett, and Jonathan Swift. This comparison showed once more how O'Nolan is in no way inferior to these authors who, greatly celebrated by critics, have nonetheless failed to achieve that great public recognition O’Nolan received alias Myles, awarded by the daily audience he reached and influenced with his Cruiskeen Lawn column. For this reason, we believe him to be representative of the comic figure’s function as a social regulator and as a builder of solidarity, such as that Raymond Williams spoke of in his work (Williams 1982), with in mind the aim of building a ‘culture in common’. There is no way for a ‘culture in common’ to be acquired if we do not accept the fact that even the most functional society rests on conventions, and in a world more and more ‘connected’ we need someone to help everybody negotiate with different cultures and persons. The comic gives us a worldly perspective which is at the same time comfortable and distressing but in the end not harmful as the one furnished by politicians could be: he lets us peep into parallel worlds without moving too far from our armchair and, as a consequence, is the one who does his best for the improvement of our understanding of things.