Corruption and Education: Empirical evidence from cross-country micro-data

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Internationalization plan for social enterprises: A research on the internationalization of "Book a Street Artist"

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Cellulose micro/nano fibers conformational effects probed by nematic liquid crystal droplets

Probing micro-/nano-sized surface conformations, which are ubiquitous in biological systems, by using liquid crystal droplets, which change their ordering and optical appearance in response to the presence of more than ten times smaller cellulose based micro/nano fibers, might find new uses in a range of biological environments and sensors. Previous studies indicate that electrospun micro/nano cellulosic fibers produced from liquid crystalline solutions could present a twisted form [1]. In this work, we study the structures of nematic liquid crystal droplets threaded by cellulose fibers prepared from liquid crystalline and isotropic solutions as well as droplets pierced by spider-made fibers [2]. Planar anchoring at the fibers and planar and homeotropic at the drop surfaces allowed probing cellulose fibers different helical structures as well as aligned filaments.

Writing/erasing 3D micro and nano wrinkles in flexible elastomers for volatile organic compounds sensor

Micro/nano wrinkled patterns on cross-linked urethane/urea polymeric flexible free standing films with two soft segments, polypropylene oxide and polybutadiene, can be induced by UV-irradiation. The ability to write/erase these 3D structures, in a controlled manner, is the main focus of this work. The imprinting of the wrinkled structures was accomplished by swelling in an appropriate solvent followed by drying the membranes after the cross-linking process and UV irradiation. The surface tailoring of the elastomeric membranes was imaged by optical microscopy, scanning electronic microscopy and by atomic force microscopy. To erase the wrinkled structures the elastomers were swollen. The swelling as well as the sol/gel fraction and the UV radiation were tuned in order to control the wrinkles characteristics. It was found that the wrinkles wavelength, in the order of microns (1±0,25μm), was stamped by the UV radiation intensity and exposure time while the wrinkles' amplitude, in the order of nanometers (150-450 nm), was highly dependent on the swelling and sol/gel fraction. A prototype for volatile organic compounds detection was developed taking advantage of the unique 3D micro/nano wrinkles features.

Construção de Sistemas Integrados de Gestão para Micro e Pequenas Empresas

As Micro e Pequenas Empresas (MPE) possuem na sua essência recursos limitados. Raramente possuem um Sistema Integrado de Gestão (SIG) que lhes permita gerir o seu negócio de forma transversal e que mapeie todos os processos da empresa. Devido ao número reduzido de colaboradores, não dispõem internamente alguns serviços. O seu espaço de mercado é em geral limitado. As suas competências específicas raramente permitem apresentar uma oferta global. Por serem pequenas, não têm força negocial perante os seus fornecedores e eventuais parceiros estratégicos. A Arquitetura de Sistemas de Informação (ASI) permite representar e mapear os diversos aspetos da gestão das empresas e alinhar as Tecnologias de Informação e Comunicação (TIC) com as necessidades destas empresas. Este trabalho pretende apresentar e descrever uma Macro Arquitetura para a construção de SIG, orientados para as MPE, e que inclua um conjunto de serviços integrados numa única plataforma.

Framework for the semantic alignment of enterprise’s domain knowledge

Nowadays, the consumption of goods and services on the Internet are increasing in a constant motion. Small and Medium Enterprises (SMEs) mostly from the traditional industry sectors are usually make business in weak and fragile market sectors, where customized products and services prevail. To survive and compete in the actual markets they have to readjust their business strategies by creating new manufacturing processes and establishing new business networks through new technological approaches. In order to compete with big enterprises, these partnerships aim the sharing of resources, knowledge and strategies to boost the sector’s business consolidation through the creation of dynamic manufacturing networks. To facilitate such demand, it is proposed the development of a centralized information system, which allows enterprises to select and create dynamic manufacturing networks that would have the capability to monitor all the manufacturing process, including the assembly, packaging and distribution phases. Even the networking partners that come from the same area have multi and heterogeneous representations of the same knowledge, denoting their own view of the domain. Thus, different conceptual, semantic, and consequently, diverse lexically knowledge representations may occur in the network, causing non-transparent sharing of information and interoperability inconsistencies. The creation of a framework supported by a tool that in a flexible way would enable the identification, classification and resolution of such semantic heterogeneities is required. This tool will support the network in the semantic mapping establishments, to facilitate the various enterprises information systems integration.

Support in decision-making under uncertainty: a project risk assessment tool development and supplementary advances

A foremost dispute that persists on the contemporary world’s agenda is change. The on-going social/technological/economic changes create a competitive and challenging environment for companies to endure. To benefit from these changes, world economies partially depend on emerging Small and Medium Enterprises (SMEs) and their adaptability skills, and subsequently the development of an integrated capability to innovate has become the prime strategy for most of SMEs to subsist and grow. However, innovation and change are always somewhat bonded to an inherent risk development, which subsequently brings on the necessity of a revision of risk management approaches in innovative processes, whose importance SMEs tend to disregard. Additionally, little efforts have been made to improve and create empirical models, metrics and tools to assist SMEs managing latent risks in their innovative projects. This work seeks to present and discuss a solution to support SMEs in engaging on systematic risk management practices, which consists on an integrated risk assessment and response support web-based tool - Spotrisk® - designed for SMEs. On the other hand, an inherent subjectivity is linked with risk management and identification processes, due to uncertainty trait of its nature, for each individual perceives situations according to his own idiosyncrasy, which brings complications in normalizing risk profiles and procedures. This essay aims to bring insights concerning the support in decision-making processes under uncertainty, by addressing issues related with the risk behavior character among individuals. To address such issues, subjects of neuroscience or psychology are explored and models to identify such character are proposed, as well as models to improve presented tool. This work attempts to go beyond the restrictive aim of endeavoring on technical improvement dissertation, and in embraces an exploratory conceptualization concerning micro, small and medium businesses’ traits regarding risk characters and project risk assessment tools.

The establishment mode choice of German multinational enterprises in Brazil: A comparative approach

We examine the drivers behind the establishment mode choice of German multinational enterprises (MNEs) in the sectors of Automotive, Chemicals and Mechanical Engineering in Brazil for the years 1993-2013 using a novel sample of primary data obtained directly from German MNEs. Based on prevalent theories found in the literature, we test the most common hypotheses on our sample. Firms with high R&D activities and firms with prior market knowledge in Brazil in from of previous sales offices are more likely to enter Brazil by a Greenfield investment. We also show that it is the specific private ownership of the German so-called hidden champions that drive those specific SMEs to enter Brazil by Greenfield, a sneaking suspicion that has been made before. Finally, we show that the establishment mode choice between Brazil and the USA only deviates to a low extent, with German MNEs preferring to enter Brazil by Greenfield and the USA by M&A. Thereby, we provide valuable insights for future research in this field.

The financial system in Mozambique: Opportunities, barriers and market potential

This research is empirical and exploratory intending to analyse the attractiveness of banking in Mozambique, considering its positive outlook. To identify the opportunities and barriers, the methods adopted were elite interviews with banking executives, complemented by secondary data. The opportunities for new entrants seem to include bankarization and the emergence of micro and smallmedium enterprises; other avenues seem to include investment banking, support of mega-projects (e.g. energy, infrastructures) through syndicates and cooperation with multilaterals, and the participation in developing capital markets. Conversely, the main barriers include shortage of talent, inadequate infrastructures, poverty, unsophisticated entrepreneurial culture (e.g. informal economy, inadequate financial reporting), burdensome bureaucracy (e.g. visas), foreign exchange regulation, as well as low liquidity and high funding costs for banks. The key conclusions suggest a window of opportunity for niche markets, and new products and services in retail and investment banking.

The importance of succession planning in family-owned Small and Medium Enterprises in Portugal

This work project addresses the importance of succession planning in family-owned Small and Medium Enterprises (SMEs). This is directly related with Human Resources Management (HRM) given that there is an HRM long term vision in order for the succession to be planned on time and benefit the companies. This study focused on SMEs since these are the entities that have a minor focus on HRM practices. A total of 22 in-depth interviews were conducted and analyzed. Selected SMEs owners/managers and successors/antecessors were interviewed with the purpose of acquiring more insight on the level of succession planning, using a qualitative methodology from which the process of succession was derived. This study unveils that the first step in this process is related to the definition of criteria to be a good successor, followed by the choice of possible successors, being the children the natural successors, but also considering other potential ones, and finally some considerations on the future of these companies.

Otimização da técnica de micro Fluorescência de Raios- X para o estudo de ossos

Nos países desenvolvidos, as doenças reumáticas são o grupo de doenças mais fre-quentes da espécie humana, sendo por isso o primeiro motivo de consulta nos cuidados de saúde primários e a principal causa de incapacidade temporária para o trabalho e de reformas antecipadas por doença/invalidez (Canhão & Branco, 2013). O estudo destas doenças torna-se cada vez mais urgente visto que estas têm tendência crescente, tendo em conta os atuais esti-los de vida e o aumento da longevidade da população. Nesta dissertação foi estudada e otimi-zada a técnica de Micro Fluorescência de Raios-X (μ-XRF) de forma a permitir um estudo de elementos maioritários e elementos traço em ossos com doenças reumáticas, tendo em espe-cial atenção a razão Ca/P, já que, por estudos até agora efetuados, esta razão é considerada um biomarcador adequado para a avaliação da saúde dos ossos. Foram então verificados os erros aleatórios e sistemáticos existentes nesta técnica e concluiu-se quais os tipos de parâme-tros que devem ser tidos em conta para este estudo, tais como corrente, tensão do tubo, filtros, entre outros. As amostras foram ainda analisadas com a técnica de PIGE (Particle Induced Gamma-ray Emission) e comparados os resultados com os de μ-XRF de forma a avaliar a in-fluência da topologia da amostra. Pretende-se que este estudo seja o início do desenvolvimen-to de um método alternativo de diagnóstico precoce de doenças reumáticas, conduzindo a um tratamento mais eficaz e melhorando assim a qualidade de vida da população.

Caraterização metrológica de contadores de micro caudal

Nas últimas décadas, as empresas têm sido sujeitas a uma maior concorrência, ao desenvolvimento tecnológico mais acelerado e a novos desafios no que respeita à qualidade. A Metrologia deverá assim acompanhar estas tendências do mercado. O Departamento de Metrologia (DMET) do Instituto Português da Qualidade, I.P. (IPQ) tem vindo a desenvolver esforços significativos que visam a melhoria contínua das técnicas e dos processos de medição e de calibração realizados nos laboratórios. A presente dissertação de mestrado foi realizada no Laboratório de Volume e Caudal (LVC) do DMET. Os objetivos iniciais do trabalho centraram-se na caraterização metrológica de contadores de fluidos, tendo como base a medição do caudal, utilizando como método de referência o método gravimétrico. De forma a validar o sistema de medição foram realizados ensaios entre 1 mL/h a 100 mL/h, em condições de reprodutibilidade, com dois sistemas padrão distintos de acordo com o caudal a ensaiar. Em todos os ensaios efetuados foi necessário monitorizar as condições ambientais, i.e. temperatura, pressão atmosférica, humidade relativa e a temperatura do líquido padrão, para a aplicação das correções necessárias. Outro feito importante foi a caraterização das fontes de incerteza, que permitiram caraterizar o resultado das medições. A metodologia utilizada para a avaliação e para a estimativa da incerteza de medição encontra-se descrita no Guide to the Expression of Uncertainty in Measurement (GUM). Neste projeto foram contempladas fontes de incerteza como as associadas à evaporação, à impulsão do tubo, à resolução da balança, entre outras. Com os resultados obtidos foi possível elaborar um procedimento técnico para a Calibração de Caudalímetros de Líquidos. Os resultados obtidos permitiram garantir a rastreabilidade das medições de caudal de líquidos ao SI, essencial para a calibração de equipamentos no Laboratório Nacional de Metrologia (LNM) do IPQ, nomeadamente para micro caudalímetros no intervalo de medição entre 0,12 mL/h e 600 mL/h.

Distributed solar micro generation

Taking into account the fact that the sun’s radiation is estimated to be enough to cover 10.000 times the world’s total energy needs (BRAKMANN & ARINGHOFF, 2003), it is difficult to understand how solar photovoltaic systems (PV) are still such a small part of the energy source matrix across the globe. Though there is an ongoing debate as to whether energy consumption leads to economic growth or whether it is the other way around, the two variables appear correlated and it is clear that ensuring the availability of energy to match a country’s growth targets is one of the prime concerns for any government. The topic of centralized vs distributed electricity generation is also approached, especially in what regards the latter fit to developing countries needs, namely the lack of investment capabilities and infrastructure, scattered population, and other factors. Finally, Brazil’s case is reviewed, showing that the current cost of electricity from the grid versus the cost from PV solutions still places an investment of this nature with 9 to 16 years to reach breakeven (from a 25 year panel lifespan), which is too high compared to the required 4 years for most Brazilians. Still, recently passed legislation opened the door, even if unknowingly, to the development of co-owned solar farms, which could reduce the implementation costs by as much as 20% and hence reduce the number of years to breakeven by 3 years.

Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science