Obtenção de organovermiculitas utilizando tensoativos e microemulsões e suas aplicações na separação de isômeros do Xileno

Surfactants are versatile organic compounds that have, in a single molecule, double chemical affinity. The surfactant molecule is composed by a hy drophobic tail group, a hydrocarbon chain (linear, branched, or mixed), and by a hydrophilic head group, which contains polar groups that makes it able to be applied in the organophilization process of natural clays. Microemulsions are microheterogeneous b lends composed by: a surfactant, an oily phase (non - polar solvent), an aqueous phase, and, sometimes, a co - surfactant (short - chain alcohol). They are systems with thermodynamic stability, transparent, and have high solubility power. Vermiculite is a clay m ineral with an expandable crystalline structure that has high cation exchange capacity. In this work vermiculite was used to obtain organoclays. The ionic surfactants dodecyl ammonium chlori de (DDAC) and cetyltrimethylammonium bromide (C 16 TAB) were used in the organophilization process. They were used as surfactant aqueous solutions and, for DDAC, as a microemulsion system. The organoclays were used to promote the separation of binary mixtures of xylene isomers (ortho - and meta - xylene). Dif ferent analytical techniques were used to characterize microemulsion systems and also the nanoclays. It was produced a water - rich microemulsion system with 0.92 nm droplet average diameter. The vermiculite used in this work has a cationic exchange capacity of 172 meq/100g and magnesium as main cation (24.25%). The basal spacing of natural vermiculite and organo - vermiculites were obtained by X - ray Diffraction technique. The basal spacing was 1.48nm for natural vermiculite, 4.01nm for CTAB - vermiculite (CTAB 4 ) , and 3.03nm for DDAC - vermiculite (DDAC M1A), that proves the intercalation process. Separation tests were carried out in glass columns using three binary mixtures of xylene (ortho - xylene and meta - xylene). The results showed that the organovermiculite pre sented an enhanced chemical affinity by the mixture of hydrocarbons, when compared with the natural vermiculite, and also its preference by ortho - xylene. A factorial experimental design 2 2 with triplicate at the central point was used to optimize the xylen e separation process. The experimental design revealed that the initial concentration of isomers in the mixture and the mass of organovermiculite were the significant factors for an improved separation of isomers. In the experiments carried out using a bin ary mixture of ortho - xylene and meta - xylene (2:1), after its percolating through the organovermiculite bed (DDAC M1), it was observed the preference of the organoclay by the ortho - xylene isomer, which was retained in greater quantity than the meta - xylene o ne. At the end of the treatment, it was obtained a final concentration in meta - xylene of 47.52%.

Imunidade recíproca e livre concorrência: considerações acerca de sua fruição por empresas estatais

This study begins with a brief overview of tax immu nities in general, dealing with the concept, legal, doctrinal ratings and limits. Then enters into the reciprocal immunity, since its birth in the United States, its justifica tions, until her current developments in the Brazilian Supreme Court, which has expanded it quite considerably. That Court has extended to state owned enterprises, even if pa id by public prices or rates, or if acts somewhat away from its essential functions, es pecially if they are public services provider. Given this linkage, these are also treate d in own topic, grounded in newer doctrinal proposals and less attached to historical formalisms (see such Supremacy of Public Interest over Private one). Public services are approached in its diversity, oblivious to traditional monolithic nature and accu stomed to the modern doctrine of fundamental human rights. It deals also the princip les of free enterprise and free competition, given that the public service provider s have lived intensely in this environment, be they public or private agents. In d ialectical topic, these institutes are placed in joint discussion, all in an attempt to in vestigate their interactions and propose criteria less generic and removed from real ity, to assess the legitimacy of the mutual enjoyment of immunity by certain agents. Sev eral cases of the Court are analyzed individually, checking in each one the app lication of the proposed criteria, such logical-deductive activity and theory of pract ice approach. At the end, the conclusions refer to a reciprocal immunity less rhe torical and ideological and more pragmatic and consequentialist. It is proposed the end to the general rules or abstract formulas of subsumption, with concerns on the one h and the actual maintenance of the federal pact, and on the other by a solid econo mic order without inapt advantages to certain players, which flatly contradicts the co nstitutional premises.

Estudo paramétrico da injeção de polímeros em reservatórios de petróleo

Developing an efficient methodology for oil recovery is extremely important . Within the range of enh anced oil recovery, known as EOR, the injection of polymer solutions becomes effective in controlling the mobility of displacing fluid . This method consists of adding polymers to the injection water to increase its viscosity, so that more water diffuses in to the porous medium and increasing the sweep efficiency in the reservoir. This work is studied by numerical simulation , application of the injection polymer solution in a homogeneous reservoir , semisynthetic with similar characteristics to the reservoirs of the Brazilian Northeast , numerical simulations were performed using thermal simulator STARS from CMG (Computer Modelling Group ). The study aimed to analyze the influence of some parameters on the behavior of reservoir oil production, with the response to cumulative production. Simulations were performed to analyze the influence of water injection, polymer solution and alternating injection of water banks and polymer solution, comparing the results for each simulated condition. The primary outcomes were: oil viscosity, percentage of injected polymer, polymer viscosity and flow rate of water injection. The evaluation of the influence of variables consisted of a complete experimental design followed a Pareto analysis for the purpose of pointing out which va riables would be most influential on the response represented b y the cumulative oil production . It was found that all variables significantly influenced the recovery of oil and the injection of polymer solution on an ongoing basis is more efficient for the cumulative production compared to oil recovery by continuous water injection. The primary recovery show ed low levels of oil production , water injection significantly improves the pro duction of oil in the reservoir , but the injection of polymer solution em erges as a new methodology to increase the production of oil, increasing the life of the well and possible reduction of water produced.

Cenário da produção acadêmica em história da matemática no ensino de matemática: uma análise reflexiva das teses e dissertações (1990-2010)

This research aims to make a reflective analysis about the academic production originated in the stricto sensu post graduation programs in the country, produced in the period of 1990 to 2010, in the field of History of Mathematics, especifically on works about the History of Mathematics in Mathematics education and that present pedagogical proposals that make use of the History of Mathematics in order to teach Mathematics. Defending the thesis that the researches on mathematics education with goals turned to the use of didactic proposals related to the history of mathematic that take in consideration the coherency between epistemological aspects inherent to mathematics history and anthological elements materialized on the conceptions of mathematics and mathematics history and of apprenticeship (implicitly or explicitly exposed) may originate significant contribution to the field of history of mathematics on education. Among these, nine were Master’s Degree dissertations and five PHD’s theses. The reflective analysis was accomplished from two matrixes; one from theoretical nature and the other, ontologic nature, elaborated from the pretexts of Sanches Gamboa, about the epistemological analysis from academic production in the field of Mathematics Education and the following theoretical perspectives in the field of History of Mathematics Education, that are: linear evolutionary theory, structural construtivist operative, evolutionary discontinuous, historical and socialcultural investigation and the use of activities estimulating the usage of verbal and nonverbal expressions. These perspectives were based on the works of Miguel and Miorim, Mendes and Radford. As results, we have detected some established dissonances between the categories related to theoretical and ontologic levels and the pedagogical proposal presented in these researches. On the other hand, we have discovered works that are able to establish consonances between the theoretical and ontological elements and the presented pedagogical proposal. These works carry significative contributions to the field of History of Mathematics applied to Mathematics pedagogical practice, inclusively presenting significative theoretical elements to the production of knowledge recognized as scientific in the Mathematics field

Desenvolvimento e avaliação tribológica de emulsão O/A a partir de óleo vegetal epoxidado para aplicação em fluídos de corte

The cutting fluids are lubricants used in machining processes, because they present many benefits for different processes. They have many functions, such as lubrication, cooling, improvement in surface finishing, besides they decreases the tool wear and protect it against corrosion. Therefore due to new environment laws and demand to green products, new cutting fluids must be development. These shall be biodegradable, non-toxic, safety for environment and operator healthy. Thus, vegetable oils are a good option to solve this problem, replacing the mineral oils. In this context, this work aimed to develop an emulsion cutting fluid from epoxidized vegetable oil, promoting better lubrication and cooling in machining processes, besides being environment friendly. The methodology was divided in five steps: first one was the biolubricant synthesis by epoxidation reaction. Following this, the biolubricant was characterized in terms of density, acidity, iodo index, oxirane index, viscosity, thermal stability and chemical composition. The third step was to develop an emulsion O/A with different oil concentration (10, 20 and 25%) and surfactant concentration (1, 2.5 and 5%). Also, emulsion stability was studied. The emulsion tribological performance were carried out in HFRR (High Frequency Reciprocating Rig), it consists in ball-disc contact. Results showed that the vegetable based lubricant may be synthesized by epoxidationreaction, the spectra showed that there was 100% conversion of the epoxy rings unsaturations. In regard the tribological assessment is observed that the percentage of oil present in the emulsion directly influenced the film formation and coefficient of friction for higher concentrations the film formation process is slow and unstable, and the coefficient of friction. The high concentrations of surfactants have not improved the emulsions tribological performance. The best performance in friction reduction was observed to emulsion with 10% of oil and 5% of surfactant, its average wear scar was 202 μm.

Petrologia das fraturas associadas a feições típicas de dissolução hipogênica na Formação Salitre, Bacia de Irecê, Bahia, Brasil

The recognition of karst reservoirs in carbonate rocks has become increasingly common. However, most karst features are small to be recognized in seismic sections or larger than expected to be investigated with borehole data. One way forward has been the study of analogue outcrops and caves. The present study investigates lithofacies and karst processes, which lead to the generation of the largest system of caves in South America. The study area is located in the Neoproterozoic Una Group in central-eastern Brazil. This province comprises several systems of carbonate caves (Karmann and Sanchéz, 1979), which include the Toca da Boa Vista and Barriguda caves, considered the largest caves in South America (Auler and Smart, 2003). These caves were formed mainly in dolomites of the Salitre Formation, which was deposited in a shallow marine environment in an epicontinental sea (Medeiros and Pereira, 1994). The Salitre Formation in the cave area comprises laminated mud/wakestones, intraclastic grainstones, oncolitic grainstones, oolitic grainstones, microbial laminites, colunar stromatolites, trombolites and fine siliciclastic rocks (marls, shales, and siltites). A thin layer and chert nodules also occur at the top of the carbonate unit. Phosphate deposits are also found. Our preliminary data indicate that folds and associated joints control the main karstification event at the end of the Brasiliano orogeny (740-540 Ma). We recognized five lithofacies in the cave system: (1) Bottom layers of grainstone with cross bedding comprise the main unit affected by speleogenesis, (2) thin grainstone layers with thin siltite layers, (3) microbial laminites layers, (4) layers of columnar stromatolites, and a (5) top layer of siltite. Levels (1) to (3) are affected by intense fracturing, whereas levels (4) and (5) seal the caves and have little fracturing. Chert, calcite and gipsite veins cut across the carbonate units and play a major role in diagenesis. Our preliminary study indicate that hypogenic spelogenesis is the main process of karst development and contributed significantly to the generation of secondary porosity and permeability in the carbonate units.

Caracterização e separação física de placas de circuito impresso de computadores obsoletos

The unbridled consumption of electronic equipment associated with fast immersion of new technologies on the market leads to the accelerated growth of electronic waste. Such waste mostly contains printed circuit boards in its structure. Printed circuit boards have many metals, including heavy metals, being highly toxic. Electronic waste is discarded improperly and indiscriminately, usually without any previous treatment and with other municipal waste, contaminating the environment and causing serious problems to human health. Beyond these metals, there are also precious metals and high value-added basis, that can be recovered and recycled, reducing the exploration of natural resources. Thus, due to the high growth potential and reuse of these waste treatment processes, characterization and separation were applied to the printed circuit boards. The printed circuit boards were subjected to physical treatments such as dismantling, crushing, sizing separation, magnetic separation and chemical treatments such as pyrolysis and leaching. Through characterization process (pyrolysis and leaching) the proportions of the components of the granulometric range were determined: 46,08% of metals; 23,32% of polymers and 30,60% of ceramics. It was also observed by particle size separation that metal components tend to concentrate in coarse fractions, while polymeric and ceramic components in fine fractions. From the magnetic separation process was obtained 12,08% of magnetic material and 82,33% of non-magnetic material.

Síntese de ferritas de cobalto e níquel dopadas com zinco e caracterização de suas propriedades eletromagnéticas

This work shows that the synthesis by combustion is a prominent alternative to obtain ceramic powders of higher oxides, nanostructured and of high purity, as the ferrites of formulas Co(1-x)Zn(x)Fe2O4 e Ni(1-x)Zn(x)Fe2O4 with x ranging from 0.2 mols, in a range from 0.2 ≤ x ≥ 1.0 mol, that presents magnetic properties in coexistence of ferroelectric and ferrimagnetic states, which can be used in antennas of micro tapes and selective surfaces of low frequency in a range of miniaturized microwaves, without performance loss. The obtainment occurred through the combustion process, followed by appropriate physical processes and ordered to the utilization of the substrate sinterization process, it gave us a ceramic material, of high purity degree in a nanometric scale. The Vibrating Sample Magnetometer (VSM) analysis showed that those ferritic materials presents parameters, as materials hysteresis, that have own behavior of magnetic materials of good quality, in which the magnetization states can be suddenly changed with a relatively small variation of the field intensity, having large applications on the electronics field. The X-ray Diffraction (XRD) analysis of the ceramic powders synthesized at 900 °C, characterize its structural and geometrical properties, the crystallite size and the interplanar spacing. Other analysis were developed, as Scanning Electron Microscopy (SEM), X-ray Fluorescence (XRF), electric permittivity and the tangent loss, in high frequencies, through the equipment ZVB - 14 Vector Network Analyzer 10 MHz-14 GHz, of ROHDE & SCHWART.

Estudo e aplicação da transformada de Fourier na regularização de dados sísmicos na exploração de petróleo

In the oil prospection research seismic data are usually irregular and sparsely sampled along the spatial coordinates due to obstacles in placement of geophones. Fourier methods provide a way to make the regularization of seismic data which are efficient if the input data is sampled on a regular grid. However, when these methods are applied to a set of irregularly sampled data, the orthogonality among the Fourier components is broken and the energy of a Fourier component may "leak" to other components, a phenomenon called "spectral leakage". The objective of this research is to study the spectral representation of irregularly sampled data method. In particular, it will be presented the basic structure of representation of the NDFT (nonuniform discrete Fourier transform), study their properties and demonstrate its potential in the processing of the seismic signal. In this way we study the FFT (fast Fourier transform) and the NFFT (nonuniform fast Fourier transform) which rapidly calculate the DFT (discrete Fourier transform) and NDFT. We compare the recovery of the signal using the FFT, DFT and NFFT. We approach the interpolation of seismic trace using the ALFT (antileakage Fourier transform) to overcome the problem of spectral leakage caused by uneven sampling. Applications to synthetic and real data showed that ALFT method works well on complex geology seismic data and suffers little with irregular spatial sampling of the data and edge effects, in addition it is robust and stable with noisy data. However, it is not as efficient as the FFT and its reconstruction is not as good in the case of irregular filling with large holes in the acquisition.

Estudo e aplicação da transformada de Fourier na regularização de dados sísmicos na exploração de petróleo

In the oil prospection research seismic data are usually irregular and sparsely sampled along the spatial coordinates due to obstacles in placement of geophones. Fourier methods provide a way to make the regularization of seismic data which are efficient if the input data is sampled on a regular grid. However, when these methods are applied to a set of irregularly sampled data, the orthogonality among the Fourier components is broken and the energy of a Fourier component may "leak" to other components, a phenomenon called "spectral leakage". The objective of this research is to study the spectral representation of irregularly sampled data method. In particular, it will be presented the basic structure of representation of the NDFT (nonuniform discrete Fourier transform), study their properties and demonstrate its potential in the processing of the seismic signal. In this way we study the FFT (fast Fourier transform) and the NFFT (nonuniform fast Fourier transform) which rapidly calculate the DFT (discrete Fourier transform) and NDFT. We compare the recovery of the signal using the FFT, DFT and NFFT. We approach the interpolation of seismic trace using the ALFT (antileakage Fourier transform) to overcome the problem of spectral leakage caused by uneven sampling. Applications to synthetic and real data showed that ALFT method works well on complex geology seismic data and suffers little with irregular spatial sampling of the data and edge effects, in addition it is robust and stable with noisy data. However, it is not as efficient as the FFT and its reconstruction is not as good in the case of irregular filling with large holes in the acquisition.

Conhecimento da doença renal crônica entre médicos conforme as diretrizes práticas

INTRODUCTION: Chronic kidney disease (CKD) is a global health problem, with increasing prevalence in its terminal stage and one of the factors that can contribute is the failure to recognize the disease and its risk factors. OBJECTIVE: To evaluate the knowledge of medical residents (MR) and medical preceptors (MP) in hospitals in the Federal University of Rio Grande do Norte in Natal-RN - Brazil, on the DRC, based on the policy of the Kidney Disease Improving Global Outcomes (KDIGO ). METHODS: Cross-sectional study where 64 MR (R1 = 32; R2 = 15; R3 = 17) and 63 MP answered a questionnaire divided into seven sessions that addressed aspects of the DRC since the setting up referral to a nephrologist. RESULTS: Only 20 participants (15.7%) reported using any guidelines for the management of CKD. The scores obtained by session were: Definition and classification (46.1 ± 47.8); Risk factors (70.5 ± 27.9); Laboratory evaluation (58.2 ± 8.8); Clinical action plan (57.6 ± 19.9); Reduction in proteinuria (68.3 ± 15.0); Complications (64.8 ± 19.9); Referral to a nephrologist (73.0 ± 44.6). There was a statistically significant difference between the knowledge of MR and MP in the sessions: Laboratory evaluation (MR 61.5 ± 8.4 vs 54.8 ± 7.9 MP; p <0.001); Reduction in proteinuria (73.1 ± 11.4 vs MR MP 63.5 ± 16.7; p <0.001) and Referral to a nephrologist (MR 81.2 ± 39.3 vs 64.5 ± 48.2 MP; p = 0.035). Among the MR, the R2 obtained the best score (63.9 ± 22.6 vs R1 R2 R3 71.9 ± 17.2 vs 63.5 ± 22.5, p = 0.445). It identified a low percentage of success of the doctors on the definition of CKD (MP = 46%; R1 = 40.6%; R2 = 60%; R3 = 52.9%; p = 0.623) and classification (MP = 34.9%; R1 = 53.1%, R2 = 60%; R3 = 52.9%; p = 0.158). CONCLUSION: The study showed that most doctors do not use any guidelines for clinical management of CKD and that there are gaps in knowledge on the subject, even among physicians who work in the university environment. In this sense, we propose the realization of mini-workshops for participants and students from boarding UFRN, using Case-Based Learning Strategy (CBL), with small group discussion, to strengthen the incorporation of CKD guidelines in undergraduate teaching and in clinical medical practice in general.

Conhecimento da doença renal crônica entre médicos conforme as diretrizes práticas

INTRODUCTION: Chronic kidney disease (CKD) is a global health problem, with increasing prevalence in its terminal stage and one of the factors that can contribute is the failure to recognize the disease and its risk factors. OBJECTIVE: To evaluate the knowledge of medical residents (MR) and medical preceptors (MP) in hospitals in the Federal University of Rio Grande do Norte in Natal-RN - Brazil, on the DRC, based on the policy of the Kidney Disease Improving Global Outcomes (KDIGO ). METHODS: Cross-sectional study where 64 MR (R1 = 32; R2 = 15; R3 = 17) and 63 MP answered a questionnaire divided into seven sessions that addressed aspects of the DRC since the setting up referral to a nephrologist. RESULTS: Only 20 participants (15.7%) reported using any guidelines for the management of CKD. The scores obtained by session were: Definition and classification (46.1 ± 47.8); Risk factors (70.5 ± 27.9); Laboratory evaluation (58.2 ± 8.8); Clinical action plan (57.6 ± 19.9); Reduction in proteinuria (68.3 ± 15.0); Complications (64.8 ± 19.9); Referral to a nephrologist (73.0 ± 44.6). There was a statistically significant difference between the knowledge of MR and MP in the sessions: Laboratory evaluation (MR 61.5 ± 8.4 vs 54.8 ± 7.9 MP; p <0.001); Reduction in proteinuria (73.1 ± 11.4 vs MR MP 63.5 ± 16.7; p <0.001) and Referral to a nephrologist (MR 81.2 ± 39.3 vs 64.5 ± 48.2 MP; p = 0.035). Among the MR, the R2 obtained the best score (63.9 ± 22.6 vs R1 R2 R3 71.9 ± 17.2 vs 63.5 ± 22.5, p = 0.445). It identified a low percentage of success of the doctors on the definition of CKD (MP = 46%; R1 = 40.6%; R2 = 60%; R3 = 52.9%; p = 0.623) and classification (MP = 34.9%; R1 = 53.1%, R2 = 60%; R3 = 52.9%; p = 0.158). CONCLUSION: The study showed that most doctors do not use any guidelines for clinical management of CKD and that there are gaps in knowledge on the subject, even among physicians who work in the university environment. In this sense, we propose the realization of mini-workshops for participants and students from boarding UFRN, using Case-Based Learning Strategy (CBL), with small group discussion, to strengthen the incorporation of CKD guidelines in undergraduate teaching and in clinical medical practice in general.

A pedagogia industrial da FIEMG: um estudo sobre o pensamento empresarial a partir da revista vida industrial (1961-1974)

The present research results of the studies and debates inherent in PhD in Education at the Graduate Program in Education at the Federal University of Uberlândia, belonging to the Research Line "Politics and Knowledge in Education." This thesis aims to analyze the contradictory meaning of education as training human history, specifically educational representative under the logic of the industrial business associated FIEMG (Federation of Industries of the State of Minas Gerais) in the context 1961-1974. This definition is justified by the historical fact that it was a period marked by the cyclical crises of capital and their impacts in the final phase of the industrialization process in Brazil: it starts with one of the apexes of economic growth in the country , driven by national developmental , continues with a severe political crisis in 1966 , also impacting the economic sphere, and finally, with the constant quest for economic stability even under high prices, hatch the factors that led to the Brazilian economy to the context of the "Economic Miracle". For this, it was necessary to link the debate between education and work from the perspective of historical materialism and dialectical their subsidies theoretical-methodological and epistemological. In the first chapter, we designed a "State of the art" category "human formation", conceived as a process of education and history, from the Marxist assumptions, aiming at the reconstruction of concepts and meanings of which is the formation of workers in contradictory logic, the bias of comprehensive training and the prospect of capital accumulation. Then, in the second chapter, we present a review about industrialization, the industrial business and its development perspective 1961-1974. The third chapter was established on a contextualization of the state and its peculiarities, the industrial business and its proposed development both nationally and at the state (Minas Gerais). Finally, in the fourth chapter, was organized dialogue with the sources, from a historical survey of the shares of the industrial business with an emphasis on education, which converged in a pedagogy industrial consolidation in line with the political and economic conditions specific period from 1961 to 1974. It has mailing bibliographic reference business thinking expressed in the concreteness of training workers and industry of Minas Gerais, in agreement with the demands of work and training of mining companies. The thesis of this study is the defense that the corporate actions which constituted pedagogy industrial concepts were articulated to political and economic development in Brazil, since the discipline to work imposed by such conceptions met the human worker training geared to the accumulation the general capital and industrial capital in particular. Establish, therefore, different logics, the state level, the scope of private foreign capital and domestic private capital, which came up the process of capital accumulation, loading, contradictorily, the possibilities of building the human beyond capital, or a teaching job.

Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos

PEREIRA, C. R. S. et al. Impacto da estratégia saúde da família com equipe de saúde bucal sobre a utilização de serviços odontológicos. Cad. Saúde Pública, v. 25, n. 5, p.985-996. Maio, 2009. ISSN 0102-311X.

Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos

PEREIRA, Carmen Regina dos Santos et al. Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos. Cadernos de Saúde Pública, Rio de Janeiro, v. 25, n. 5, p. 985-996, maio 2009.