Enhancement of optically thick to thin line intensities in solar and stellar coronal plasmas through radiative transfer effects: an angularly resolved study.

An analysis of radiative transfer effects present in the Fe XV ion stage of solar and stellar coronal plasmas provides a general explanation of line radiation intensity enhancement above the optically thin limit. Full linearization radiation transfer is compared with the escape factor method and found to be in good agreement at the lower column densities. An angular study of the enhancement shows that symmetry factors are of great importance. This gives a possible reason for the indeterminate status of opacity in relation to coronal lines of distant stellar sources, where only emission integrated across the whole surface is detected.

Championing the interface between mental health and child protection: evaluation of a service initiative to improve joint working in Northern Ireland

The importance of establishing effective interagency working between adult mental health services and child care services in order to safeguard children has been repeatedly identified by research, policy, inquiries and inspection reports. This article reports on the evaluation of an initiative in one Health and Social Care Trust in Northern Ireland that aimed to facilitate joint working and so improve service provision and protection for children and families. The Champions Initiative involved identifying a champion in each multi-disciplinary community mental health team and in each family and child care team who would have responsibility for providing information, promoting joint working and identifying any obstacles to better co-operation. The evaluation of this initiative assessed levels of experience, training, confidence, understanding and awareness in the Champions and their team members at baseline. The Champions and their Team Leaders were then followed-up after six months to obtain their qualitative views of the impact of the initiative. The results include comparisons between mental health and child care staff, and crucially, views about whether the initiative has had any impact on working together. This study also generated recommendations for further service development in this complex and important area of practice.

Design and Evaluation of a "Pharmacists in Schools" Community Outreach Programme: A Pilot Study.

Aims: To design, evaluate and pilot a novel programme that would allow school children to become “pharmacists for the day”,encouraging them to recognise the importance of science, to contribute to the Department of Health‟s Building the Community Partnership strategy and University Outreach to the community and to provide undergraduate pharmacy students with teaching experience and an opportunity to build their CV.

Methods: Concept and formulation development, branding work,schools visits,questionnaires and semi-structured interviews.

Results: Suitable formulations were developed and prepared by school children on visits to their schools. The children seemed to enjoy the experience and their teachers gave both positive and constructive feedback. Pharmacy undergraduate students felt they had gained valuable experience that will benefit their future careers.

Conclusion: The Pharmacists in Schools outreach programme has now been successfully piloted and launched and will now be fully implemented in 20 schools in the local community.

Early Results of the 3mm Spectral Line Survey toward the L1157 B1 Shocked Region

We have conducted a sensitive 3mm observation toward the shocked region, Lynds 1157 B1, which is an interaction spot between a molecular outflow and its ambient gas. We have successfully detected the CH3CHO, HCOOCH3, and HCOOH lines, as well as the CH2DOH line. The abundances of these molecules relative to CH3OH are found to be lower than those in the low-mass star-forming core, IRAS 16293-2422. Since these molecules are thought to evaporate from grain mantles, the observational results mean that complex molecules are less abundant in grain mantles residing in the ambient cloud surrounding a prestellar/protostellar core. Instead, efficient formation of the complex organic species and deuterated species should take place in a prestellar/protostellar core. The present result verifies the importance of an unbiased line survey of this source.

The Evaluation of an Interdisciplinary Pain Protocol in Long Term Care

Objectives: To evaluate the effectiveness of (1) dissemination strategies to improve clinical practice behaviors (eg, frequency and documentation of pain assessments, use of pain medication) among health care team members, and (2) the implementation of the pain protocol in reducing pain in long term care (LTC) residents. Design: A controlled before-after design was used to evaluate the effectiveness of the pain protocol, whereas qualitative interviews and focus groups were used to obtain additional context-driven data. Setting: Four LTC facilities in southern Ontario, Canada; 2 for the intervention group and 2 for the control group. Participants: Data were collected from 200 LTC residents; 99 for the intervention and 101 for the control group. Intervention: Implementation of a pain protocol using a multifaceted approach, including a site working group or Pain Team, pain education and skills training, and other quality improvement activities. Measurements: Resident pain was measured using 3 assessment tools: the Pain Assessment Checklist for Seniors with Limited Ability to Communicate, the Pain Assessment in the Communicatively Impaired Elderly, and the Present Pain Intensity Scale. Clinical practice behaviors were measured using a number of process indicators; for example, use of pain assessment tools, documentation about pain management, and use of pain medications. A semistructured interview guide was used to collect qualitative data via focus groups and interviews. Results: Pain increased significantly more for the control group than the intervention group over the 1-year intervention period. There were significantly more positive changes over the intervention period in the intervention group compared with the control group for the following indicators: the use of a standardized pain assessment tool and completed admission/initial pain assessment. Qualitative findings highlight the importance of reminding staff to think about pain as a priority in caring for residents and to be mindful of it during daily activities. Using onsite champions, in this case advanced practice nurses and a Pain Team, were key to successfully implementing the pain protocol. Conclusions: These study findings indicate that the implementation of a pain protocol intervention improved the way pain was managed and provided pain relief for LTC residents.

Evaluation of quality of life and priorities of patients with glaucoma

PURPOSE: To investigate the quality of life and priorities of patients with glaucoma.

METHODS: Patients diagnosed with glaucoma and no other ocular comorbidity were consecutively recruited. Clinical information was collected. Participants were asked to complete three questionnaires: EuroQuol (EQ-5D), time tradeoff (TTO), and choice-based conjoint analysis. The latter used five-attribute outcomes: (1) reading and seeing detail, (2) peripheral vision, (3) darkness and glare, (4) household chores, and (5) outdoor mobility. Visual field loss was estimated by using binocular integrated visual fields (IVFs).

RESULTS: Of 84 patients invited to participate, 72 were enrolled in the study. The conjoint utilities showed that the two main priorities were "reading and seeing detail" and "outdoor mobility." This rank order was stable across all segmentations of the data by demographic or visual state. However, the relative emphasis of these priorities changed with increasing visual field loss, with concerns for central vision increasing, whereas those for outdoor mobility decreased. Two subgroups of patients with differing priorities on the two main attributes were identified. Only 17% of patients (those with poorer visual acuity) were prepared to consider TTO. A principal component analysis revealed relatively independent components (i.e., low correlations) between the three different methodologies for assessing quality of life.

CONCLUSIONS: Assessments of quality of life using different methodologies have been shown to produce different outcomes with low intercorrelations between them. Only a minority of patients were prepared to trade time for a return to normal vision. Conjoint analysis showed two subgroups with different priorities. Severity of glaucoma influenced the relative importance of priorities.

The clinical effectiveness and cost-effectiveness of screening for open angle glaucoma:A systematic review and economic evaluation

Objectives: To assess whether open angle glaucoma (OAG) screening meets the UK National Screening Committee criteria, to compare screening strategies with case finding, to estimate test parameters, to model estimates of cost and cost-effectiveness, and to identify areas for future research. Data sources: Major electronic databases were searched up to December 2005. Review methods: Screening strategies were developed by wide consultation. Markov submodels were developed to represent screening strategies. Parameter estimates were determined by systematic reviews of epidemiology, economic evaluations of screening, and effectiveness (test accuracy, screening and treatment). Tailored highly sensitive electronic searches were undertaken. Results: Most potential screening tests reviewed had an estimated specificity of 85% or higher. No test was clearly most accurate, with only a few, heterogeneous studies for each test. No randomised controlled trials (RCTs) of screening were identified. Based on two treatment RCTs, early treatment reduces the risk of progression. Extrapolating from this, and assuming accelerated progression with advancing disease severity, without treatment the mean time to blindness in at least one eye was approximately 23 years, compared to 35 years with treatment. Prevalence would have to be about 3-4% in 40 year olds with a screening interval of 10 years to approach cost-effectiveness. It is predicted that screening might be cost-effective in a 50-year-old cohort at a prevalence of 4% with a 10-year screening interval. General population screening at any age, thus, appears not to be cost-effective. Selective screening of groups with higher prevalence (family history, black ethnicity) might be worthwhile, although this would only cover 6% of the population. Extension to include other at-risk cohorts (e.g. myopia and diabetes) would include 37% of the general population, but the prevalence is then too low for screening to be considered cost-effective. Screening using a test with initial automated classification followed by assessment by a specialised optometrist, for test positives, was more cost-effective than initial specialised optometric assessment. The cost-effectiveness of the screening programme was highly sensitive to the perspective on costs (NHS or societal). In the base-case model, the NHS costs of visual impairment were estimated as £669. If annual societal costs were £8800, then screening might be considered cost-effective for a 40-year-old cohort with 1% OAG prevalence assuming a willingness to pay of £30,000 per quality-adjusted life-year. Of lesser importance were changes to estimates of attendance for sight tests, incidence of OAG, rate of progression and utility values for each stage of OAG severity. Cost-effectiveness was not particularly sensitive to the accuracy of screening tests within the ranges observed. However, a highly specific test is required to reduce large numbers of false-positive referrals. The findings that population screening is unlikely to be cost-effective are based on an economic model whose parameter estimates have considerable uncertainty, in particular, if rate of progression and/or costs of visual impairment are higher than estimated then screening could be cost-effective. Conclusions: While population screening is not cost-effective, the targeted screening of high-risk groups may be. Procedures for identifying those at risk, for quality assuring the programme, as well as adequate service provision for those screened positive would all be needed. Glaucoma detection can be improved by increasing attendance for eye examination, and improving the performance of current testing by either refining practice or adding in a technology-based first assessment, the latter being the more cost-effective option. This has implications for any future organisational changes in community eye-care services. Further research should aim to develop and provide quality data to populate the economic model, by conducting a feasibility study of interventions to improve detection, by obtaining further data on costs of blindness, risk of progression and health outcomes, and by conducting an RCT of interventions to improve the uptake of glaucoma testing. © Queen's Printer and Controller of HMSO 2007. All rights reserved.

Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries

Objective: The aim of this research is to use finite element analysis (FEA) to quantify the effect of the sample shape and the imperfections induced during the manufacturing process of samples on the bond strength and modes of failure of dental adhesive systems through microtensile test. Using the FEA prediction for individual parameters effect, estimation of expected variation and spread of the microtensile bond strength results for different sample geometries is made. Methods: The estimated stress distributions for three different sample shapes, hourglass, stick and dumbbell predicted by FEA are used to predict the strength for different fracture modes. Parameters such as the adhesive thickness, uneven interface of the adhesive and composite and dentin, misalignment of axis of loading, the existence of flaws such as induced cracks during shaping the samples or bubbles created during application of the adhesive are considered. Microtensile experiments are performed simultaneously to measure bond strength and modes of failure. These are compared with the FEA results. Results: The relative bonding strength and its standard deviation for the specimens with different geometries measured through the microtensile tests confirm the findings of the FEA. The hourglass shape samples show lower tensile bond strength and standard deviation compared to the stick and dumbbell shape samples. ANOVA analysis confirms no significant difference between dumbbell and stick geometry results, and major differences of these two geometries compared to hourglass shape measured values. Induced flaws in the adhesive and misalignment of the angle of application of load have significant effect on the microtensile bond strength. Using adhesive with higher modulus the differences between the bond strength of the three sample geometries increase. Significance: The result of the research clarifies the importance of the sample geometry chosen in measuring the bond strength. It quantifies the effect of the imperfections on the bond strength for each of the sample geometries through a systematic and all embracing study. The results explain the reasons of the large spread of the microtensile test results reported by various researchers working in different labs and the need for standardization of the test method and sample shape used in evaluation of the dentin-adhesive bonding system. © 2007 Academy of Dental Materials.

Electron-Impact Excitation Collision Strengths and Theoretical Line Intensities for Fine-Structure Transitions in S III

We present Maxwellian-averaged effective collision strengths for the electron-impact excitation of S III over a wide range of electron temperatures of astrophysical importance, log Te (K) = 3.0-6.0. The calculation incorporates 53 fine-structure levels arising from the six configurations—3s 23p 2, 3s3p 3, 3s 23p3d, 3s 23p4s, 3s 23p4p, and 3s 23p4d—giving rise to 1378 individual lines and is undertaken using the recently developed RMATRX II plus FINE95 suite of codes. A detailed comparison is made with a previous R-matrix calculation and significant differences are found for some transitions. The atomic data are subsequently incorporated into the modeling code CLOUDY to generate line intensities for a range of plasma parameters, with emphasis on allowed ultraviolet extreme-ultraviolet emission lines detected from the Io plasma torus. Electron density-sensitive line ratios are calculated with the present atomic data and compared with those from CHIANTI v7.1, as well as with Io plasma torus spectra obtained by Far-Ultraviolet Spectroscopic Explorer and Extreme-Ultraviolet Explorer. The present line intensities are found to agree well with the observational results and provide a noticeable improvement on the values predicted by CHIANTI.

A Pilot Evaluation of the Palliative Performance Scale in Long Term Care: Tips for Success

Aims: Palliative care in long-term care (LTC) homes is an area of growing concern. Little work has been done to explore innovative ways to identify and care for residents who become palliative. The purpose of this intervention study was to evaluate the implementation of the Palliative Performance Scale (PPS) in LTC. Specifically we explored staff perceptions about implementing the PPS and how it cued staff to initiate palliative care discussion with residents and family when a resident’s health declined.

Methods: This study utilized a qualitative descriptive design that included data from four separate sources: journals of three ‘champions’ who were responsible for leading the implementation of the PPS; staff evaluations of three educational training sessions; minutes from meetings; and 11 interviews from key staff who were involved in the implementation process. Data were analyzed using thematic content analysis.

Results: Staff generally felt positively about using the PPS in LTC and stated that it increased awareness of palliative care and helped identify those residents who were nearing the end of life. There were some barriers to implementing it, such as staff resistance and lack of time to complete it. The importance of having a designated ‘champion’ and effective interdisciplinary communication in addition to widespread training, were identified as successful strategies to facilitate the implementation process.

Conclusion: These study findings support the use of the PPS in LTC and offer some perspective about ways to implement it successfully. Future work is needed to evaluate the PPS in LTC using more rigorous designs.

Evaluation of sampling methods for learning from imbalanced data

The problem of learning from imbalanced data is of critical importance in a large number of application domains and can be a bottleneck in the performance of various conventional learning methods that assume the data distribution to be balanced. The class imbalance problem corresponds to dealing with the situation where one class massively outnumbers the other. The imbalance between majority and minority would lead machine learning to be biased and produce unreliable outcomes if the imbalanced data is used directly. There has been increasing interest in this research area and a number of algorithms have been developed. However, independent evaluation of the algorithms is limited. This paper aims at evaluating the performance of five representative data sampling methods namely SMOTE, ADASYN, BorderlineSMOTE, SMOTETomek and RUSBoost that deal with class imbalance problems. A comparative study is conducted and the performance of each method is critically analysed in terms of assessment metrics. © 2013 Springer-Verlag.

The Management of Long-Term Sickness Absence in Large Public Sector Healthcare Organisations: A Realist Evaluation Using Mixed Methods

Purpose The success of measures to reduce long-term sickness absence (LTSA) in public sector organisations is contingent on organisational context. This realist evaluation investigates how interventions interact with context to influence successful management of LTSA. Methods Multi-method case study in three Health and Social Care Trusts in Northern Ireland comprising realist literature review, semi-structured interviews (61 participants), Process-Mapping and feedback meetings (59 participants), observation of training, analysis of documents. Results Important activities included early intervention; workplace-based occupational rehabilitation; robust sickness absence policies with clear trigger points for action. Used appropriately, in a context of good interpersonal and interdepartmental communication and shared goals, these are able to increase the motivation of staff to return to work. Line managers are encouraged to take a proactive approach when senior managers provide support and accountability. Hindering factors: delayed intervention; inconsistent implementation of policy and procedure; lack of resources; organisational complexity; stakeholders misunderstanding each other’s goals and motives. Conclusions Different mechanisms have the potential to encourage common motivations for earlier return from LTSA, such as employees feeling that they have the support of their line manager to return to work and having the confidence to do so. Line managers’ proactively engage when they have confidence in the support of seniors and in their own ability to address LTSA. Fostering these motivations calls for a thoughtful, diagnostic process, taking into account the contextual factors (and whether they can be modified) and considering how a given intervention can be used to trigger the appropriate mechanisms.

Evaluation of Multidisciplinary Delivery of Surgical Anatomy Teaching

Title Evaluation of Multidisciplinary Delivery of Surgical Anatomy Teaching

Authors Walsh I.K., Taylor S.J., Dorman A, Boohan M.

Objectives To evaluate the efficacy of newly introduced multidisciplinary methods to deliver Surgical Anatomy teaching to undergraduate medical students.

Design and Setting Qualitative and quantitative study using questionnaires and focus groups, employing students of the perioperative and emergency medicine (POEM) module of the phase 4 undergraduate medical curriculum at Queen’s University Belfast.

Outcome Measures To determine:
(1) if multidisciplinary teaching is effective in delivering surgical anatomy teaching,
(2) student’s learning preferences regarding this teaching method.
Results The questionnaire response rate was 89% (216 of 244 students; female: male ratio 1.25) and 42 students participated in 6 focus groups. Mean questionnaire responses indicated a favourable opinion on quality assurance items and multidisciplinary teaching. 81% of students agreed that multidisciplinary teaching enhanced learning and 86% felt that this did not adversely affect interaction. A positive contribution towards POEM learning was reported for Radiology (95% of students), Anatomy (93%) and Surgery (78%). The benefits of multidisciplinary teaching were congruent for Anatomy, Radiology and Surgery with 78% of students indicating a perceived favourable association with learning. Multidisciplinary teaching was not associated with diluted interaction, with 62% of students describing interaction as sufficient. 88% of students positively ranked tutor characteristics of enthusiasm and encouragement as being strongly associated with teacher quality. Positive perception of overall quality was strongly associated with learning preferences as well as more generic quality assurance issues (80% students; alpha coefficient 0.83).
The results were supported by triangulation of the above quantitative data with qualitative data generated by the focus groups. Whilst students frequently misunderstood the meaning of “multidisciplinary teaching”, there was an appreciation of the method’s worth; students recognised and valued the relevance of Anatomy, Radiology and Surgery teaching to POEM learning. The importance of vertically integrating Anatomy into all stages of the undergraduate curriculum was especially recognised.

Reference Aarnio M, Nieminen J, Pyorala E, Lindbolm-Ylanne S. Motivating medical students to learn. 2010 Med Teach;32(4):199-204.

The uncritical realism of realist evaluation

This article is a response to Ray Pawson’s critique of critical realism, the philosophy of science elaborated by Roy Bhaskar. I argue with Pawson’s interpretation of critical realism’s positions on both natural and social science and his charges concerning its totalizing ontology, its arrogant epistemology and its naive methodology. The differences between critical realism and realist evaluation are not as significant as Pawson contends. The main differences between the two realisms lie in their approaches to the relationship between social structures and human agency, and between facts and values. I argue that evaluation scientists need to clearly distinguish structure and agency. They should also make their values explicit. The uncritical approach of realist evaluation, combined with its underplaying of the importance of agency, leaves it open to implication in the abuses of bureaucratic instrumentalism.

An analysis of stage performance in automotive turbocharger centrifugal compressors

As the concept of engine downsizing becomes ever more integrated into automotive powertrain development strategies, so too does the pressure on turbocharger manufacturers to deliver improvements in map width and a reduction in the mass flow rate at which compressor surge occurs. A consequence of this development is the increasing importance of recirculating flows, both in the impeller inlet and outlet domains, on stage performance.
The current study seeks to evaluate the impact of the inclusion of impeller inlet recirculation on a meanline centrifugal compressor design tool. Using a combination of extensive test data, single passage CFD predictions, and 1-D analysis it is demonstrated how the addition of inlet recirculation modelling impacts upon stage performance close to the surge line. It is also demonstrated that, in its current configuration, the accuracy of the 1-D model prediction diminishes significantly with increasing blade tip speed.
Having ascertained that the existing model requires further work, an evaluation of the vaneless diffuser modelling method currently employed within the existing 1-D model is undertaken. The comparison of the predicted static pressure recovery coefficient with test data demonstrated the inherent inadequacies in the resulting prediction, in terms of both magnitude and variation with flow rate. A simplified alternative method based on an equivalent friction coefficient is also presented that, with further development, could provide a significantly improved stage performance prediction.